Screen sharing and Pro Tools not working

Hi there. I'd really love to get some help with an issue I'm having.
I'm using ProTools 9 on my 2008 Mac Pro 2.8 Octo.
Protools runs perfect, unless I attempt to use screen sharing or any sort of VNC connection. As soon as I try to screen share with my laptop, or control the mac pro with my ipod touch using VNC, Protools can't play for more than a few seconds without an error bringing the program to a halt.
I started a thread on AVID's site that has more detail if you are interested.
http://duc.avid.com/showthread.php?t=291040
But I've had no answers and I don't know if it's something I can tweak in my apple system to fix the fact that Protools is not interacting well with screen sharing.
any advice would be much appreciated. I'd LOVE for this to work, otherwise I need to buy a dedicated DAW controller, which doesn't make sense to me in 2011!
thanks!
Message was edited by: joeldadrummer

Hello, Joel,
Unless you're actually using Apple Remote Desktop, the specific product, I'd suggest you post in the Mac OS X Networking forum or perhaps the Using Mac OS X forum, the one applicable to your version of Mac OS X. You'll be more likely to get help there.
When you repost, be sure to include full details, especially your version of Mac OS X. I really doubt that you're running an Apple IIe and Mac OS 8.6 or earlier, and while you might think that amusing, it doesn't help people solve your problems.
Good luck, and regards.
Message was edited by: Dave Sawyer

Similar Messages

Closed connection in stalled screen sharing and now does not work

Using screen sharing I created a second admin account on the computer 2. I enabled quick account switching and tried to switch user accounts to the new admin account. I linked the new admin account to be shared with my existing admin account on computer 1. The screen never switched over to my new admin account and I couldn't quit screen sharing so I closed the connection with computer 2. Now I can't share the screen with computer 2 at all, even using my original admin account (not the newly created one). I can't reboot my computers because it will abort jobs that need to remain running.
I can still share screens between computer 1 and other computers (i.e. not computer 2) but when I try to share with computer 2, it doesn't even ask me to log in.

This issue remains unresolved, but since Apple Discussions decided to archive my question it is impossible to receive any replies.
GRR.

Content aware move and extend tool not working in PSE12

Photoshop Elements 12 content aware move and extend tool not working with Yosemite upgrade.

Have you deleted the preferences and the saved application states?
A Reminder for Mac Folks upgrading to Yosemite | Barbara's Sort-of-Tech Blog

My Ipod touch recently fell into water, but once dried, it worked with seemingly little to no problems. Today, after working for at least an hour, the screen froze and is now not working, but the sounds are still functioning.

I accidentally dropped my Ipod into the lake, at the beach yesterday, but i caught it early and it wasn't too soaked... i wiped it off for the most part, and most of the buttons and the screen worked fine! i was shocked, and there were a few glitches with the camera and the slide button on the lock screen, but otherwise it was greatly intact! so i gave it a rest, put it in my purse, and picked it up fifteen minutes later, and it was working 100% normally again! when i got home a few hours later, i put it in rice for a few hours, taking it out every once and a while to check my notifications... it still seemed to be working perfectly, so i just set it down out of the rice, assuming the moisture was gone. this morning, again, everything was working normally, no glitches, UNTIL, i opened my instagram app, and the screen froze, and it seemed like it had two separate screens, and i held the Sleep button down until the screen went black... then i tried turning it back on, etc. and it still didn't work, and so i plugged it into the computer, holding down the sleep and home buttons, and itunes identified it as in recovery mode, and started updating. i tried again to press the sleep and home butttons, maybe pressing only the home button, because I heard the Siri noise, as well as the charging sound, but the screen was still black.... i checked my iTunes, and lo and behold, it had identified my iPod, and synced it to the computer, as if it were normally functioning. However, the screen is still not working, and Siri is not working either. The sounds may be the only thing that's functioning. Should i send it in?

- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G, $99 for the other 4Gs, $99 for the 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
Apple - iPod Repair price
Sometime it takes a little while for the water to damage the iPod.

Burn and Dodge tools not working on b/w sketch scan

Hi, I may have somehow eliminated information in an image of a black and white sketch which prevents the dodge and burn tools from working...is there a common mistake which prevents these tools from working as they normally should on a black and white image with multiple shades? (The sketch is not pure black and pure white but has multiple gray shades...it "looks" like an image on which these tools should work.)
When adjusting Levels for the image all of its "information" seems to be clustered around the "0" point on the far left of the Levels adjustment slider, if that helps in understanding this problem....
Did I mistakenly somewhere along the line destroy information in this image necessary for these tools to work?
Thanks in advance

> it would be nice if dodge and burn worked on partially transparent images. This is impossible?
It is working properly. With a partially transparent layered image, only **some** of the visible tone is coming from the image layer. The rest is coming from whatever is showing on the layer underneath. Burn and dodge will only affect the layer you're working on. As I said, I could get get B&D to affect it a little ... and that's is exactly what it should do in this case. Because the pixels are partially transparent, B&D is only going to **partially** affect the visible tone. It's altering the pixels on the image layer, just not very much because there aren't very many pixels available.
Peel off white does an incredible job. However, I would use it only once. The fact that the sketch becomes a bit transparent tells you it's removing image information.

Selection and Type Tools not working in InDesign CC for Mac

I have just recently downloaded InDesign CC (I use Mac OSX.9.2) and got the World Tools plugin to typeset in different languages.
However, I am having trouble using the selection and type tools. In about the first half of the file, the type tool displays the pointer/dashed box/I-beam icon and doesn't put the cursor in the text when I click on it. I can't click to select text as I should be able to, and if I try to click and drag, all I do is end up creating another text frame. But in about the second half of the file, the selection and type tools work the way they should.
When I click and hold on the type tool, the cursor changes to the crosshairs icon for creating text frames and the "W: H: " dialogue box for text frames appears.
How can I get the tools to work properly in the entire document? Is anyone else having this problem?

@Cindy – usually all 3rd party developers will provide some information for installing and uninstalling their products. First see if you can find some information on their web sites.
Also there should be a dedicated Adobe Extension Manager app where you can look up the installed parts of InDesign. Since I do not have InDesign CC installed, I do not know exactly, but its name should be something like "Adobe Extension Manager CC".
If you start this app it will show all parts installed with InDesign (or other apps that are installed).
Usually at the bottom of the list are the 3rd party installed components. They do not state "Adobe Incoroprate System" as author. Never uninstall (remove) the Adobe ones!
Here a screen grab from my German Adobe Extension Manager CS5:
If you select one, a new option is available at the right. In my case here the "Entfernen" button ("Remove" in English).
Uwe

Have downloaded CC photoshop and brush tool not working

Hi, I have downloaded PS and the brush tool does not work. I downloaded PS last week and set up a watermark to use on my photos using the define brush preset. It wouldnt work,so i googled a heap of things to try and nothing worked.I made sure opacity was 100% and also that i was on a layer and nothing worked, I have just uninstalled and reinstalled and went to a new PSD and the brush still doesnt work.Please help, it is really frustrating. Here is a screen shot if that helps. Thanks

You have the History Brush selected. Normal brush is two icons up the tool bar.

Live Paint and other tools not working?

Hello,
Most of the time while using Illustrator almost all my tools except for the pen tool do not work, as in the mouse icon turns into this circle with a line through it, and doesn't allow me to do anything on my layer, and it's just one layer nothing else. Why does this happen? I have a drawing that I image traced on illustrator, and would like to paint it now, but I can't use the live paint option. Sometimes the select tool doesn't select anything and it just disappears!
Can anyone help me with this?

I'm a complete beginner to illustrator and I thought it was just another small thing that beginners are not familiar with and that other people can relate? Anyway, I use Illustrator CC on a Mac. Here is a capture I made trying to use the brush tool:
The cursor of the mouse doesn't show, but it is like I said, a circle with a line across. This is where the live paint doesn't work as well:
Maybe you can spot something on my screen that I'm doing wrong?

Screen backlight and keyboard backlight not working

Yesterday I turned on my old but proud PowerBook17" and the *screen was black*, but you could barely see everything. *Also keyboard backlight is not working.*
I read many many forums and all say that black screen caused by inverter failure, but in my case keyboard lighting is also dead, so I wonder *if this is something different* and not the inverter.
I would appreciate any advises or ideas cause I love this machine..
Thank you in advance!

Same problem here. I initially thought the auto-brightness problem had been fixed in 10.7.3, but sadly it hasn't. The auto-brightness works when the Mac starts, but I find it loses control and fails after wake from sleep.
I have telephoned AppleCare several times but they are not aware of this bug. They think a PRAM reset cures it, but it doesn't. As soon as the machine goes to sleep then auto-brightness fails on wake.
I have used the Apple Form to report the bug. It might eventually get fixed if others would kindly report it as well please. Here is the link:
http://www.apple.com/feedback/macosx.html

PS CS5 - rounded rectangle and move tool not working..?

CS5 Photoshop
I have just noticed that my rounded rectangle tool is not working properly. When I click and drag nothing is visible, when I release it floods my whole image with my selected color. I have tried all of the other tools and they work properly. I have tried restarting, compared settings with other tools, and checked for updates. Nothing is working and any help would be appreciated.
Also, I have what appears to be a common problem with my move tool. I click, drag, and drop only to have the selected image snap back to its original position. I have an intuos 5 connected, is this the culprit?
Thanks in advance...

I can't help with the snap to edge problem, but if you select your rounded rectangle shape tool, and click on the Cog in the Options bar, I suspect you have a fixed size set, and that it is bigger than your canvas.

Straightening and Crop tool not working. What to do?

I've been working with photos all morning, and now neither my Straightening Tool or Crop Tool are working. What to do?

Close and re-launch Aperture. Let us know if that doesn't take care of it.
I try to close Aperture once an hour. It pushes my hardware (and, likely, OS) to several of its limits. Re-launching the program rinses out any crud that has accumulated (that's not _exactly_ technically correct, but ... ).

Lift and Stamp tool not working so well? White images!?

Here's a strange issue.
I worked on an image yesterday. Today, I want to copy the adjustments to another image in the same project. When I use the Lift and Stamp tool to copy the adjustments, the new image turns completely white. Even though I checked the adjustments and they look the same as the original one, the new image is all white.
Now the strange thing is when I adjusted another image today then used the Lift and Stamp tool, the adjustments copied over fine.
The only thing I can see which is different from the image I adjusted yesterday is that I had Aperture send that image to CS4 and I edited a TIFF which I stacked back with the original file.
I'll try to make a screencast available so you can see what's going on.
Looks like Apple's going to need to update Aperture 3 before it really comes out.
Antonio

Thanks for your effort. I am stunned. Would be edifying to know what is happening! I thought it might be okay as I sometimes turn my image black after applying some change, but the black is only a temporary display problem as the image is correct the next time I go to use it; perhaps in my situation Aperture was busy generating new previews for presentation of the changes. Your white is certainly a different issue. Glad it's only an isolated incident and not happening for you on the other images.

Brush and Pencil tool not working in Photoshop CS5 trial

I dowloaded the Photoshop CS5 trial yesterday 2 days ago. Everything worked perfectly yesterday. Unfortunately, today...the brush and pencil tool doesn't work. Anyone have any idea why?

We need a few more details like what doesn't work
with the brush or pencil tools.
Provide a screenshot if you feel that would help illustrate the problem.
MTSTUNER

Indesign CC - tooltip on guides and drawing tools not working

I just updated CC this morning - but the tooltip when you pull guides down or when you draw a new shape (the dimensions etc) do no longer show.
I know you can still see this in the toolbar - but it was really handy seeing near where your cursor was aswell.
Do I need to tick something in prefrences or has this fallen foul of the latest update and will need to be fixed in a future patch?
Hope some else is having the issue and just not me!

thanks Steve - that is currently ticked already and seems to not be having an affect.
It must be a bug in the latest update as a collegue who sits next to me who hasnt run the update still gets the tool tip.

Permanent links for screen sharing in 10.10 not working after upgrade

In 10.9 I used the Screen Sharing folder (Users ▸ test ▸ Library ▸ Application Support ▸ Screen Sharing) with permanent links to different machines on my network to log in for screen sharing. Trying to use these links in 10.10 I get the following error:
the link I use it: Seva Server.vncloc.
Any tips as to how to fix?

Just see the picture did not upload properly here it is again

Screen sharing and Pro Tools not working

Similar Messages

Maybe you are looking for