Screen sharing and remote management no longer working after some uptime

Server is withoiut monitor.
Users need to login via screen sharing from time to time.
"Enable screen sharing and remote management" is ticked in Server.app everything is working fine (for days, weeks).
ARD reports "Screen Sharing Available", so remote management is not running how it should.
Screen Sharing.app is "Connecting…" forever.
Kickstarting ARD (http://support.apple.com/kb/HT2370) does not help.
Restart fixes it.
Is there a workaround (over ssh) or a fix?

seduc wrote:
Do you know if
fdesetup authrestart
works then too?
Off-hand, no. I don't. See this posting, or as would be typical in any case, try it?

Similar Messages

Screen Sharing and Remote Management

Is there a way in 10.6 to make both Screen Sharing and Remote Management run at the same time?
In the past (10.5), you could convince Mac OS to run both Screen Sharing and Remote Management to run simultaneously. I say "convince" because you could not enable them both through System Preferences. You could turn one on, then use Terminal to enable the other. This worked great for me, because I needed remote management for the machines I managed, and the users need screen sharing to work from home.
However, the work-around for 10.5 no longer seems to work for 10.6. Has any one gotten this to work yet for 10.6? Thanks!

I figured this out. First enable Remote Management via System Preferences. Then create /private/etc/ScreenSharing.launchd with 'enabled' as it's contents.

Screen Sharing and Remote Login suddenly stopped working

I have had Screen Sharing and Remote Login turned on on my iMac for several weeks and they have been working fine up until now. I have been accessing the computer via VNC programs and command-line ssh logins from other computers on the same local network. When I tried to connect today, i was given the following error message.
ssh: connect to host xxx.xxx.xxx.xxx port 22: No route to host
I have all of the required settings turned on in System preferences and there are no firewalls or router settings blocking it. I connected the two computers together via ethernet cable and the error message still occurred.
I can ssh from the machine to 127.0.0.1, so the ssh server is running. I can ssh to other locations from the laptop i am attempting to connect with, so that's not the problem either. I just spent an hour on the phone with the apple tech support line and they couldn't figure anything out either. Can anybody figure something out?

have you tried the obvious - restarting the computers involved and the router?

What's the difference between Screen Sharing and Remote Management?

As the title asks. What is the difference between the two?
Because heres the thing. I set Screen Sharing on in Sharing. Then a few days later I will go back to the Sharing preferences and instead of Screen Sharing being checked. Remote Management is now checked, not Screen Sharing. What's the deal? Is that normal?
I was wondering if it was because I log into my iMac sometimes using my iPhone with that Mocha VNC program. Its the only program I use to remotely control my computer. Is that it?
Any help I can get is appreciated! Thanks!

Remote Management provides support for the additional functionality of Apple Remote Desktop as compared to a standard VNC setup. The options are otherwise identical.
(35284)

My home sharing and remote app does not work. How do I fix it? I am on a university network.

My home sharing and remote app does not work.
Here is my setup:
Macbook 2009 running Mac OS X 10.6.8
Itunes 10.6.1
Ipod Touch 4th gen Mac OS X 5.1
I am on a university secured network.

Hi Charles, chinese may be difficult, see our resident language ecxpert, Tom's reply here...
https://discussions.apple.com/message/20061347#20061347
On the slowness...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free Disk space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts?
https://discussions.apple.com/servlet/JiveServlet/showImage/2-18666790-125104/AM Pageouts.jpg

Application Manager no longer works after I got a new computer.

Application Manager no longer works after I got a new computer.
I moved all of my data from one mac to the other, but the Adobe Suite no longer works.
I tried to re-install it, but it says now that Application Manager is damaged, it keeps sending me to the download page, I download, it starts installing then it says it is damaged, and so on... Got any idea?
Thank you!

1)
Click on the Finder and look for the options listed next to Apple Icon located at the top left corner of the Desktop screen and click on "Go" menu button and select "Utilities" option.
(Applications>Utiliites)
Locate Adobe Creative Cloud and Adobe Application Manager folder under Utilities window and trash both folders.
2) Trash Adobe Creative Cloud from Applications well.
3)
Click on the below link and download & run Adobe Cleaner tool :
Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up Selected" .
https://helpx.adobe.com/content/help/en/creative-suite/kb/cs5-cleaner-tool-installation-pr oblems/_jcr_content/main-pars/accordion_container_1/accordion-par/accordion-item-1/accord i on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip
4) Click on the below link and download Adobe Application Manager and install the same:
Once the installation process is completed , the installation box will disappear. Then open Application folder and locate Adobe application manager icon and double click on it .
It will start update process and gets updated to Creative Cloud .
http://download.adobe.com/pub/adobe/creativesuite/cc/mac/ApplicationManager9.0_all.dmg
Feel free to post , if you need further assistance

Screen Sharing and video chats don't work

I've been searching this forum for awhile and I haven't found a concrete answer to my problem, so if this question has been answered please excuse me. Ok, So here's my situation am running iChat on Mac OS 10.5.1. Whenever I am using my laptop at my school on the network their, I am able to use both screen sharing and video chat. But when I am at home, I am unable to use either one. It begins to try to start the session, but then i receive a message that tells me that a connection could not be established. I know that I have internet access, but I don't know what could be wrong with it.

After investing far to long in looking at this exact issue on my end, reading the seemingly endless threads on the exact same error, trying all the various tweeks and QT settings, bandwidth limit settings, etc etc. proposed here, I have now solved this problem, and the none of the above were part of the solution.
I have perhaps one of the the most common routers on the market, Linksys WRT54GL.
In a totally unrelated network problem (a printing issue), Linksys tech support advised me to reset my router. There is a small button on the bottom. I depressed it for 30 seconds. Rebooted everything and my printer miraculously worked. Yea, I had to reenter my WAP passkey, router admin password etc., but that took 2 secs. So, what does this have to do with iChat?.... The very next time I tried iChat video and turned on and enabled my camera, the recipient immedialty saw me. No connection error.
Problem solved, for me art least. Not sure if anyone has tried this, but makes sooooo much more sense than the other unApple like suggestions I previous tried. Hope this helps.

Numbers 09 and Pages 09 no longer work after 10.6.5 update

I have the last version of iWork 09. After the 10.6.5. update Numbers 09 and Pages 09 no longer work.
Keynote 09 is fine.
Both Numbers 09 and Pages 09 open, the window for choosing a template also opens.
I am not able to choose a template. Waited for several minutes ... no chance.
Removed the software, re-installed from DVD, updated to the latest version ... this did not solve the problem. Contacted Apple support , went through many steps with no success.
Were you able to use Numbers 09 and Pages 09 after recent Mac OS X update ?
Any ideas what I could do ?
Thank you for help!

May you try to run the applications from an other user account ?
If they behave flawlessly, the culprit is in your original user account.
In such case, it's often one or several preferences files which are corrupted.
Try to
quit the applications,
move the preferences files :
<startupVolume>:Users:<yourAccount>:Library:Preferences:com.apple.iWork.Numbers. plist
<startupVolume>:Users:<yourAccount>:Library:Preferences:com.apple.iWork.Pages.pl ist
to the desktop
restart the apps.
If they behave flawlessly, you know the culprits. Trash them.
Yvan KOENIG (VALLAURIS, France) dimanche 14 novembre 2010 19:34:52

LION screen sharing and remote log in issues

Hi,
In Snow Leopard I could access my iMac screen from my macbook and have the iMac restart and allow me to log in and continue to use the iMac.
In Lion I cannot access the log in screen remotely after a restart.
I need to go to the iMac and actually log into it with the keyboard before it will show up again on the network.
I tried to adjust the sharing preferences but nothing is allowing me to manage the iMac and restart it from a different machine.
Once I am logged in the screen sharing works fine. It's the log in issue that is not working for me.
thanks for any help in advance,
christos

i have not been able to get screen sharing to work at all, which has never been a problem for me. i'm registered as an authorized user on both computers, the passwords are correct, but it keeps telling me that the username/passwords don't work. and this is after the computers have already been "connected" using the exact same passwords and user name.

Remote app no longer working after upgrade to iOS 4.3 and iTunes 10.2.1 (1)

I am unable to use my Remote app 2.1.1 with my iTunes 10.2.1.
I recently updated all software/firmware as follows:
1st Gen iPad - iOS 4.3 (8F190)
iTunes - 10.2.1 (1)
Remote - 2.1.1
I am using an iMac circa 2005 (6.1)
Mac OS X 10.6.7
2.33 Ghz Intel Core Duo; 2 GB 667 MHz DDR2 SDRAM
Wirless Router: Netgear WNDR3400, SSIDs off, WMM enabled.
I have turned on Home Sharing on both iTunes and the Remote app.
I have made sure that both iMac and iPad are on same network.
I have made sure that iTunes is allowing incoming connections through the firewall settings in system preferences.
I have deleted and reinstalled both iTunes on the iMac and Remote app on the iPad.
I have trashed the preferences for iTunes.
I have gone to Settings on the iPad and turned on Home Sharing through the iPod app.
I no longer see "Automatically search for iPods, iPhones, or iPads" in the iTunes preferences...ANYWHERE.
I have reset the router.
I have reinstalled iTunes 10.1.1 - didn't work, re-updated to 10.2.1
Installed Mac OS X 10.6.7 combo update.
Nothing seems to work.
iTunes does not show my iPad when the Remote app is launched and gives me the 4 digit code to type in to pair it.
Anyone else having this issue?
Any solutions?
Thank you,

same issue iphone 4

This Nightly feedback, Steganos password Manager drop and drag functionality no longer works after last update.

Cut and paste still works but the drop and drag so longer works.
This for Nightly Beta 64 bit.

I too have the problem: W7 64 bit. Drag and drop worked until yesterday when I "upgraded" to FF v 26.0 - I can no longer drag passwords etc from my password manager to website fields - a barred circle appears when I try to drag.
I tried pressing ESC (one profferred solution) and also reset FF to no avail.
This is more than annoying: some of my passwords are dozens of characters long and there's no way I can access sites by typing them in! I need a solution, even if it's reverting to a previous version.

Remote Control No longer works after 10.3 upgrade

I have begun pushing out ZCM 10.3 to my infrastructure and I'd like ask WHY the Remote Control Policy no longer works.
The managed device was unable to initialize Novell encryption scheme for the session. Ensure that the managed device is UTC time synchronized with this system. If the problem persists, contact Novell Technical Services
I had a clone with ZCM 10.2.2 which i upgraded to 10.3 and sent it back to my ZENimaging servers.
What is going on here?? Why does this not work?
Crippled help desk and p!ssed off Network Admin.

Originally Posted by donasutton
I have begun pushing out ZCM 10.3 to my infrastructure and I'd like ask WHY the Remote Control Policy no longer works.
The managed device was unable to initialize Novell encryption scheme for the session. Ensure that the managed device is UTC time synchronized with this system. If the problem persists, contact Novell Technical Services
I had a clone with ZCM 10.2.2 which i upgraded to 10.3 and sent it back to my ZENimaging servers.
What is going on here?? Why does this not work?
Crippled help desk and p!ssed off Network Admin.
If the problem persists, contact Novell Technical Services :)
Thomas

CP60-615DX Touchpad and external mouse no longer work after WIndows 7 SP1 update

Let me start by saying I am in the IT field, though clearly far from being great at it. I was updating a CP60-615DX at work with Win 7 x64 SP1. It installed with no errors or anything I'd consider abnormal. Once it was finished, the touchpad no long worked, as well as any mouse I'd hook up via Usb. So I checked Device manager, and the Touchpad is listed with the yellow exclamation mark, as well as mice I hook up. So I did what any respectable IT guy would do, I went to HP and downloaded x64 drivers for the Touchpad port and installed them. But they didn't fix the issue, literally nothing happened. So I installed the latest chipset drivers. Still nothing changed. So I uninstalled the device and manually added it by doing the advanced driver install for a new device, pointing it to the directory where the .exe file had placed the drivers. ...Nothing. So I uninstalled SP1,.... nothing. After uninstalling SP1, redid every aforementioned step, nothing. So my question is, **bleep**? Anyone know another way to fix an issue where the scrolling devices stop working and the drivers won't fix the issue?
Btw, the user had never set up windows restore, and my only other thought is pulling personal documents off and restoring to factory defaults. One more bit of info before I forget, when I went into Windows Recovery (which loads a pre-environment mini OS for you to restore and fix issues), the mouse worked, telling me it's not a hardware issue, it's a Windows vs devices issue.

Hi,
According to your description, since system reinstallation is not helpful, it's probably a hardware problem, it would be better to check if it is the device itself problem.
Roger Lu
TechNet Community Support

Volume and Eject Keys No Longer Work After Boot Camp 2.1 Update

Earlier this evening I allowed the Apple Software Update app in Windows to update Boot Camp to version 2.1. I allowed the computer to restart following a successful installation of the update. I've restarted two more times since then. Ever since the update (including before the computer restarted for the first time following the update), the volume and eject keys on my keyboard don't work. I also have an Apple Wireless Keyboard (one of the 2003-2007 era white/clear ones) and it exhibits the same problem. Both keyboards otherwise work fine. The computer also otherwise works fine, and there's no evidence of any driver problems.
Some other potentially relevant information:
1- The Boot Camp icon is no longer present in the Windows System Tray.
2- The Boot Camp Control Panel is still present in the Windows Control Panel and it works fine.
3- All settings in the Boot Camp Control panel are unchanged from their defaults. In particular, I have confirmed that "Use all F1, F2, etc. keys as standard function keys" is still unchecked.
4- The Windows Device Manager properly recognizes both keyboards as Apple Keyboards.
I'm using Windows Vista Ultimate on an early 2008 MacBook; system specs are in my signature. Any ideas?
Thanks for taking the time to read this, and double-thanks if you can respond with any suggestions!

Ah, the joy of working with computers...:( Apparently, from my woes with the same problem, the Apple Keyboard Manager is rightfully entered into the Run directory in the Windows registry at HKLM/Microsoft/Windows/Current Version/Run.
Why it doesn't start I still have to find out, but this may be because I have Parallels Workstatio installed as well and switch back between a virtualized Windows and a Bootcamp Windows. However, after installing Bootcamp 2.1 first and then SP3 IN THE BOOTCAMP ENVIRONMENT everything seems to work, except the Energy Options taskbar icon and Apple Keyboard Manager.
Will keep you posted on any progress I make.
Apple Support, BTW, was absolutely abysmal, with them even refusing to accept the ticket at all, on the grounds that they have no knowledge about Windows. Apple, get your support fixed!

Screen Saver and Display Sleep No Longer Work

My set up:
Mac Pro (stock) w/ 3GB RAM running 10.4.8.
Two ADC displays connected via ADC to DVI adapters
Issue:
Recently I've noticed neither my screen saver nor display sleep work. I can get the machine to sleep manually, but not automatically. My energy settings have the display sleeping after 10 min w/ the computer and HDs never sleeping. Screen Saver is set to go on after 5 min.
My MP used to go into screen saver -> display sleep mode fine. I don't know exactly when the issues started, but probably around 10.4.8. I have not installed any major software recently other than normal Apple updates.
What I've tried:
I've tried resetting the Energy Setting and Screen Saver Prefs and then doing a restart.
If anyone has an idea what is preventing my MP from going into screen saver -> display sleep mode please post. This is driving me nuts.
MacBook Pro 1.83 (7200 HD)/ MacPro 2.66/ mini 1.5Ghz / PBG4 1.25Ghz Mac OS X (10.4.8)

Turned out a bad USB device was preventing sleep. Once I removed it the display went to sleep like a baby.

Screen sharing and remote management no longer working after some uptime

Similar Messages

Maybe you are looking for