Screen sharing greyed out - Airport Extreme

Hello all:
I'm trying to use screen sharing with another mac but my screen sharing option is greyed out. The setup is as follows:
- Computer 1 is a Quad Mac Pro, connected to an Airport Extreme (wireless).
- Computer 2 is a MacBook Pro (older one, but still plenty fast).
- Both computers are running iChat 4.0.7 and OSX 10.5.7
I can ask to share Computer 2's screen and am able to view/control their screen without a problem. The problem is I'm unable to share my screen at all (greyed out). I have scoured the web and this forum to see if I can find a solution, but so far no luck.
Here's what I've done so far:
1. Set Quicktime Streaming to 1.5Mbps on BOTH computers. Restarted iChat.
2. Connection Doctor/Capabilities shows green checks all the way down.
3. System Prefs/Security/Firewall: this is set to "access for specific services". In the list, File Sharing and Screen Sharing are both at top. I have also added the iChat application to the list just in case.
4. System Prefs/Sharing - File Sharing and Screen Sharing are both on.
5. iChat App: Screen Sharing is enabled here as well.
6. Both computers are using .MAC (or ME) accounts.
7. Have checked bandwith and both connections are plenty fast (20 down/8 up)
8. Airport Extreme on my end set to WPA2 Personal (could this be causing problems)?
I'm at my wit's end, not sure how to proceed. Anyone find a way to fix this? Again, i can screenshare Computer 2 just fine. It's Computer 1 (the faster of the two) that refuses to work.
Thanks for your help!

Hi,
From your end you can Offer to Share and Ask to Share (2 options)
The same is true of the Buddy (2 more options)
You only speak of this from one end.
Having said that In the Airport Base Station (Airport Utility) go to the Internet Icon pane and then the the NAT tab and set Port Mapping Protocol to be Enabled (there is no need to set ports)
10:32 PM Thursday; June 4, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Similar Messages

  • Screen sharing greyed out

    My friend and I both have Messages beta and FaceTime on our Macs and we are unable to share screens. The screen sharing option is greyed out. What are we doing wrong?

    HI,
    Screen Sharing in System Preferences uses ths same "engine" but does not need to be turned On for iChat (Or Messages) Screen Sharing to work.
    Both parties have to be on the same network.
    This could be AIM as both AIM Names and Apple IDs ending in @mac.com and @me.com login into this service. (These types of APple IDs are also valid AIM Screen Names -see notes)
    NOTES
    Apple IDs issued from iCloud (@me.com) can only be used in iChat 6 or Messages Beta (In Lion basically)
    Also these Apple IDs must have passwords that will work with the AIM servers (No more than 16 characters)
    Edit
    Thanks for the Points
    7:14 PM      Wednesday; July 18, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously
    Message was edited by: Ralph Johns (UK)

  • IMessages screen sharing greyed out

    I have a problem here, and I don't know what's wrong:
    I'm on face time chatting with me, and she wants to screen share with me. I enable all options here: audio chat, video chat, and screen sharing.
    Then I want to share my screen with her: I click buddies, but share screen with [person] is greyed out. I asked her via facetime to see if screen sharing and audio chat and video chat are enabled, and she said yes. Both she and I are on lion, and using Messages Beta. How can I get these menu options to no be greyed out?

    Hi,
    FaceTime can be invoked (Started) from the Mesages Beta if you have been iMessaging someone.
    (You could also chose to Video them straightaway without texting first but the Name from the Contacts List in the "To" spot will still be based on iMessages and the Video icon will launch FaceTime.
    FaceTime does not do Screen Sharing.
    The Screen Sharing option (As well as the Audio Only chats and Video Chats set in the same menu) refer to the old "iChat Style" Buddy Lists and the options to connect from those.
    For these you and your Buddy need the Type of Screen Name or ID to "match" in the broadest sense.
    Either you both have something valid with AIM (AIM or @Mac.com and @me.com ending names from Apple IDs) or something that can be used with a Jabber login (Facebook, Google or other Jabber ID).
    As long as you both use iChat or Message beta then you can Video Chat. Audio Only chat and Screen Share  (AIM to AIM or Jabber to Jabber)
    9:23 PM      Thursday; May 31, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.7.4),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • After updating to new 2014 updates Lightroom would not go from 'library' to Develop - screen was greyed out with the message saying:- Please renew your membership to reinstate the develop module. My membership is up to date. I then uninstalls Lightroom an

    After updating from CC to new 2014 updates Lightroom would not go from 'Library' to 'Develop' - develop screen was greyed out showing the message 'Develop module is disabled. Please renew your membership to reactivate the Develop module.' Since my membership is fully up to date. I then uninstalled Lightroom 5 and then installed it again. Now when I try to open Lightroom 5 its LOGO flashes onto the screen and then 'crashes' in an instant. Please fix.

    Hi brooks45,
    Please try the steps mentioned in the KB Doc : http://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html
    Regards,
    Rave

  • Problems sharing internet over Airport extreme

    I have a PowerBook G4 (OS 10.4.11) with a USB wireless broadband modem connected to the internet. I bought each of my daughters a MacBook (OS 10.5), and the idea was for me to have my laptop connected to the internet, then use internet sharing via my airport extreme card so that the girls could access the internet from my connection across airport.
    I have no problem using my wireless broadband to connect to the internet. I have no problem firing up my airport extreme and creating the network, and I have no problem creating the internet share. I all seems to be working at my end. On the girls MacBooks, we have no problem firing up airport and connecting to the airport network I created. However, when we fire up safari, all we get it "you are not connected to the internet".
    I'm lost. Any ideas?

    cdelahoy, Welcome to the discussion area!
    On your PowerBook G4 do you have the firewall enabled? If so, try go to System Preferences-> Sharing preference pane and enabling Personal Web Sharing. That should open the ports needed to give Internet access to the MacBooks.
    If that doesn't work, try disabling the firewall on the PowerBook G4.

  • My safari screen is greyed out, I checked and found a response to this question.  I went to settings and cleared history, cookies, and cache, java script is on and I restarted, screen is still grey, cant touch it to do a thing.  Help!

    my safari screen is greyed out, I checked and found a response to this question.  I went to settings and cleared history, cookies, and cache, java script is on and I restarted, screen is still grey, cant touch it to do a thing.  Help!

    That is usually the fix but try this now.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears - ignore the red slider - let go of the buttons. See if that helps.
    You can also try this - quit Safari. From the home screen - Double tap the home button and your recent apps appear the bottom. Tap and hold down on the Safari icon until it wiggles. Tap the minus sign in the upper left corner to close the app. Tap the home button twice. Restart the iPad.
    Message was edited by: Demo

  • My screen repeatedly greys out & hangs. I use Firefox 3.6.15. When I close down the error message says "Firefox is not responding."

    My screen repeatedly greys out & hangs. I use Firefox 3.6.15. When I close down the error message says "Firefox is not responding.”

    See this: <br />
    https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

  • Sharing Internet via Airport Extreme using a USB wireless modem

    I have had to go to NextG access using a USB modem (only option). We previously succesfully had the second iMac sharing the internet connection on an ethernet-connected wireless service. Now, I cannot get the other iMac to share the connection, because there is no option to choose the USB modem.
    Another problem is the USB modem is top-dog - it won't connect unless I turned off anything else using anything remotely looking like wireless (even when I have my bluetooth phone connected to another USB hub). I can connect to the NextG network after disconnecting everything else and THEN reconnect, but I just can't get the Internet sharing going. I have also had the iMac freezing, demanding a power-off-power-on (unheard of in my experience!).
    Is there any remedy for the Internet sharing at all? Configuring a different channel or something on Airport? Using one of the other config options?
    I think there are something like USB-to-Ethernet adaptors (pretty costly here in Australia) and don't want to shell out for one if it doesn't work. Same with a third-party router. I also wondered if I should just forget about using Airport completely and run a few metres of crossover cable?
    Any help would be greatly appreciated, thanks.

    Hi Steven, I know this question has been answered and is a couple of months old but I think you may be able to help with my set up? I have a Thomson speedtouch 510 v6 modem router provided by Karoo (UK). My other Belkin N modem router has just bust [again] so the Speedtouch is my old faithful backup device. Now, i've never been able to get on ichat with the Belkin as its a mimo n speed and this is apparently not compatible; So i'm now on ethernet with the st510 and have just set up ports for ichat thanks to a thread called http://discussions.apple.com/thread.jspa?messageID=2719419&#2719419.
    What I want to know from you (because I really need a wireless router to get me off this ethernet support system and back on airport) is how you're getting on with the st510 / airport extreme combo now and can you use ichat on it? If so does your connection doctor say full cone in network settings or something else? As I say, I really want to use ichat and have never been able to in 3 years of owning my Macbook Pro. Hope to hear back from you Steven. Regards Steph

  • Airport icon greyed out - Airport card failure?

    The Airport icon in the menu bar is "greyed out" implying my computer (iBook Powerbook 4,1) is too far from the wireless base station. However I am typing this question on another iBook that is less than a foot away from the problem machine.
    The older computer did not have built in Wireless capability and we purchased and installed an Airport Extreme card. This was maybe ten years ago.
    I suspect that the Airport card has simply reached the end of its useful life and is unable to pick up wireless signals but would welcome any thoughts anyone else might have
    Running Mac OS X 10.4.11 and Airport card with Firmware v9.5.2

    http://x704.net/bbs/viewtopic.php?f=17&t=6670&p=81613&hilit=edimax#p81613

  • Need help connecting to a shared drive on airport extreme

    Connected to an airport extreme with a macbook and OS 10.5.8...can't seem to find where to see the USB connected to the back of the airport...any idea?

    Welcome to the discussion area!
    I am assuming that your drive is correctly formatted in Mac OS Extended (Journaled) or FAT 32. If it's formatted as Windows NFTS, the drive will not appear.
    You'll also usually need to use a powered USB hub, even if your drive has it's own power supply because the available power at the USB port on the AirPort Extreme is quite low.
    Open the Finder and look for your AirPort Extreme icon under the SHARED heading on the the left side of the window.
    Click on the AirPort Extreme icon and a folder representing your drive will appear in the right hand side of the window.
    Double click the folder to mount the drive on your desktop.

  • On safari the bottom part of the screen is greyed out. only the top inch is fine. how do i fix this?

    on safari the bottom of the screen (about 80%) is greyed out. the top part is ok. anyone know how i sort it? thanks

    should have said, this is on my ipad.

  • MBP Pro Qmaster Start Sharing Greyed Out

    I have fcp studio 2 and MBpro and dual g5. On my G5 in the system preferences for qmaster none of it is greyed out and sharing is on. On my MBP It is all greyed out and I can not select any options or click start. ANy ideas ?
    On the g5 in activity monitor I see qmasterd running. On the MBP it is not only QmasterStatusMen.
    The G5 has FCP studio 1 on it and the MBP has FCP studio 2.
    Thanks!
    Powerbook g4   Mac OS X (10.4.2)  

    Hi D May,
    Qmaster in FCS 1 is not compatible with the Qmaster in FCS 2. You need to have your Qmaster apps on the same version to work.
    Hope that helps!
    Cheers!

  • Shared disk on Airport Extreme appending path to '-1'

    Hey guys,
    Recently just got Sick Beard and SabNZBd+ setup to automate some occasional downloads I need to make (everything is completely legal there - don't worry) and I have it interface with my shared VERBATIM hard drive via my Airport Extreme.
    Everything has been working well, but it seems occasionally (I think when the hard drive is unmounted, and then remounted) that OS X appends the path of the attached disk so it becomes 'VERBATIM-1', 'VERBATIM-2' ad infinitum, instead of just remaining 'VERBATIM'.
    I have my folders all setup in Sick Beard, but it doesn't update dynamically with the unmount/remount scenario, so it remains looking for just 'VERBATIM' and I have to change the path manually, kinda defeating the purpose.
    Is there a way to keep the path static?
    N.
    Apologies if there isn't enough info, let me know if you need more. The problem seems to reside with Airport Extreme/OS X rather than the third party software, I only added it in for detail.

    Thanks for the reply,
    I'm not sure I follow. Was that a workaround or a solution?
    I am trying to make sure it remains only mounting as 'VERBATIM' and not with the additional characters so other applications etc can no longer find it.
    This is what I see after 'Go to Folder' - '/Volumes/'...
    http://i53.tinypic.com/2enaxhk.png
    As you can see, 'VERBATIM-3' is the only one associated with the actual path currently, whereas the others used to be, in descending order.

  • Why is my internet sharing greyed out?

    I have a powerbook g4 running 10.5.8 and when I go into the sharing prefs for internet sharing everything is greyed out.  I can't choose where to share from or where to share to. Let alone being able to turn on the internet sharing.  I just want to share the internet connection from my powerbook to my power mac.  Can somebody please help???
    Thanks in advance,
    Paul

    Read here:
    http://support.apple.com/kb/ts1559

  • Leopard iChat Screen Sharing Grayed out

    Hi there-
    I'm experiencing an issue with the new "Share my screen" feature of Leopard OS X 10.5. I've been able to successfully establish a connection with two other people in both directions (letting them control my screen, and controlling their screen), however have had issues connecting to my father (whom, of course, would be the most useful to have the feature with for support/troubleshooting).
    Basically, in iChat the option to request control of his screen is grayed out when I attempt to connect to him. On his end, his option to share his screen is grayed out. Interestingly, my option to share my screen with him is available and he can request control of my screen, but it never actually connects.
    Are there any firewall ports that need to be open on our routers? Has anyone else seen this problem?
    I have an intel based 24" iMac (the white model), and he has the brand new 20" iMac.
    I wasn't sure whether to post here or in the Leopard Forum, so I'll post in both.
    Thanks for your help!
    Joel

    I've done that, to both iMacs (Intel based) though i still have them grayed out. Before, when the other computer's screen sharing was turned off, and mine was on, i was able to offer him to share my screen, but once he activated his Screen sharing from the System Pref. we both are having the Screen sharing button grayed out in Bonjour and AIM Buddy List.
    Any hints? much appreciated
    Thanks in advance

Maybe you are looking for

  • Torch is not working I need to get my info from BB Protect

    My Torch just stopped working and I just got an iPhone.  I need to get my info that is stored on BB Protect and download my pics, etc. into my PC or my new iPhone.  How can I do this?  I have a lot of work stuff in there and I am desperate!

  • Keyboard & mouse keeping losing connection

    Replaced batteries.  Shows battery at 100%.  Every few minutes, I lose the connection.  Happens with keyboard and mouse, but about ten times more frequently with my keyboad.  Same things.  Suddenly stops working, maybe types the last letter a hundred

  • Startup Error Message: System Extension Cannot Be Used

    Every time I turn on my computer, this error message appears. I have searched my Library > Extension folders and I cannot find the AppleUSBEthernetHost. I have also searched for the Apple USBEthernet Host, and cannot find this. As far as I know, noth

  • Navigating to a Selected node in a JTree

    Hi I have a Jtree which has nodes and sub nodes.Whenever I expand a node and click on its subnode I want to highlight/navigate to that subnode in the tree. e.g: Root --- node1 --node2 --node3 --- node2 --node4 When I expand node1 and click on node2 I

  • Hieracrchical Query

    create table temp as select * from emp where ename !='SMITH' I want to find out what record or ename is missing from temp 1st query SELECT CONCAT (LPAD (' ', LEVEL * 3 - 3), ename) ename FROM emp CONNECT BY PRIOR empno = mgr START WITH mgr IS NULL AN