Screen Sharing slows down dramatically after RDP upgrade from 2 to 3
For some reason once we upgraded from RDP 2 to RDP 3 our Screen Sharing has gotten increasingly slow. We are using it in a school environment where the teacher will share their screen with the students, and as we add more students to the share the sharing slows down to become unusable. This problem is intermittent (otherwise I would go though the logs and run a control test), and has only started upon upgrading to RDP 3. Anyone else experience this behavior? I believe we are all running 10.5.x on the OS side.
I also know someone that is having this issue; it was fine with the previous ARD version they were using in the computer lab, but after upgrading screen sharing have slowed down. It's not really that of an issue when its just one computer, but when they put all 30 computers the FPS drops down.
Keep in mind that they were not having the issues before upgrading. I've also been told that, currently, they got a 5 MB connection. I ran a network test and everything seemed fine (or more like I didn't know what was going to tell me that something was wrong, but all the numbers were very low).
Similar Messages
-
OS X Screen Sharing doesn't work after Mavericks Upgrade
I have upgraded my 3x machines to Mavericks and Screen Sharing no longer works. I have tried this with and without firewalls on. File Sharing works but Screen Sharing will say connecting for a LONG time and then say that it's not enabled and to go turn it on...
help?
- MacMini - late 2009
- MacMini - mid 2011
- MBA - mid 2012
I have seen a couple people talk about this as well, but wasn't the same thing..I believe this is the easiest way to resolve any screensharing issues in MacOSX: Solution: Reset the computer list in Screen Sharing. To acomplish that install OnyX. By the way a great tool for your Mac maintenance.
Go to Cleaning>Misc. and
check My Computers list in Screen Sharing.
Press Execute and wait until it finish.
Restart your computer.
I hope this helps. -
After upgrading to Yosemite, If i plug in my Zte MF 820 LTE modem into my Macbook Pro USB socket or a Thunderbolt USB Ethernet converter/ into my Notebook, it slow down dramatically the system, unusable, need to reboot and unplug the USB moderm or Thunderbolt interface. So it does work only without any plug in device..!?
Any idea ?How To Run Telia ZTE MF820D 4G Modem On Lion
Open Network Preferences
Choose the ZTEUSBModem interface
Set “Configuration” to Default
Set “Phone Number” to *99#
Leave “User Name” and “Password” blank.
Check the “Show modem status in menu bar” checkbox for convenience.
Click “Advanced…”
Set “Vendor” to Other
Set “Model” to ZTE USB Modem.
Now click the little phone in the menubar and choose “Connect” from the dropdown.
Link: http://walternaeslund.com/how-to-run-telia-zte-mf820d-4g-modem-on-lion/
I'm using MacBook Pro Yosemite 10.10 and a MF820 too.I had a same problem before.But Now already fixed.
Hope this can help you.
Regrad
Amare YSL -
One more slower MacBook Pro after Yosemite upgrade
Hello,
I noticed on queries like that of GreenVal1984 that it helps to have a EtreCheck report pasted. Because my MacBookPro - especially Apple Mail, iCal, and Spotlight within the Finder - has slowed down since I have upgraded to Yosemite, here is the system report. I ran AdwareMedic and got nothing, but not sure what "mds stores" is which may be using energy. Any way you can help me declutter the energy use or find what is slowing it will be most appreciated!
Problem description:
Since installing Yosemite, my MacBook Pro has significantly slowed down, especially Apple Mail.
EtreCheck version: 2.0.11 (98)
Report generated November 30, 2014 at 3:14:20 PM EST
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,5
1 2.53 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 2 days 4:26:13
Disk Information: ℹ️
ST9250315ASG disk0 : (250.06 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
yippy skippy (disk0s2) / [Startup]: 249.20 GB (114.58 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-868
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.2) Support
[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cloudd.plist
[failed] com.apple.cmfsyncagent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.icloud.fmfd.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.recentsd.plist
[failed] com.apple.sbd.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.awdd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.GSSCred.plist
[failed] com.apple.installd.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.periodic-daily.plist
[failed] com.apple.periodic-weekly.plist
[failed] com.apple.softwareupdate_download_service.plist
[failed] com.apple.softwareupdated.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.trusteer.rapport.rapportd.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.bradfordnetworks.agent.plist Support
[failed] com.gadgettrack.SkyHook.plist Support
[running] com.gadgettrak.gadgettrakdeamon.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
[invalid?] Safe.Connect.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[running] com.amazon.music.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
User Login Items: ℹ️
Mail ApplicationHidden (/Applications/Mail.app)
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Google Chrome Application (/Applications/Google Chrome.app)
Wondershare Helper Compact Application (/Users/[redacted]/Library/Application Support/Helper/Wondershare Helper Compact.app)
iAntiVirus ApplicationHidden (/Applications/iAntiVirus/iAntiVirus.app)
SymQuickMenu Application (/Library/Application Support/Norton Solutions Support/SymQuickMenu/SymQuickMenu.app)
DiskMountNotify Application (/Library/Application Support/Norton Solutions Support/Norton AntiVirus/DiskMountNotify.app)
SymSecondaryLaunch Application (/Library/Application Support/Norton Solutions Support/Scheduler/SymSecondaryLaunch.app)
ScanNotification Application (/Library/Application Support/Norton Solutions Support/Norton AntiVirus/ScanNotification.app)
Popup Application (/Library/Application Support/Pharos/Popup.app)
HP IO Classic Proxy Application (/Library/Frameworks/HPServicesInterface.framework/Versions/A/Runtime/HP IO Classic Proxy.app)
CSA Application (/Library/Application Support/Bradford Networks/Persistent Agent/CSA.app)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
OVSHelper: Version: 1.1 Support
Default Browser: Version: 600 - SDK 10.10
Musicnotes: Version: 1.17.3 Support
OfficeLiveBrowserPlugin: Version: 12.2.8 Support
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
AmazonMP3DownloaderPlugin101736: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
DivX Web Player: Version: 3.1.1.9 - SDK 10.6 Support
Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
iPhotoPhotocast: Version: 7.0
AdobePDFViewer: Version: 9.5.5 Support
Photo Center Plugin: Version: Photo Center Plugin 1.1.2.2 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 Support
User Internet Plug-ins: ℹ️
WebEx: Version: 1.0 Support
3rd Party Preference Panes: ℹ️
Flash Player Support
GadgetTrak Support
Perian Support
Trusteer Endpoint Protection Support
Time Machine: ℹ️
Auto backup: NO - Auto backup turned off
Volumes being backed up:
yippy skippy: Disk size: 249.20 GB Disk used: 134.62 GB
Destinations:
Time Machine Backups [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 0 B < (Disk used 134.62 GB X 3)
Top Processes by CPU: ℹ️
19% fpsaud
10% WindowServer
1% launchd
1% Google Chrome
0% AppleSpell
Top Processes by Memory: ℹ️
137 MB Google Chrome
120 MB mds_stores
120 MB Finder
120 MB iTunes
116 MB WindowServer
Virtual Memory Information: ℹ️
43 MB Free RAM
1.44 GB Active RAM
1.42 GB Inactive RAM
668 MB Wired RAM
14.48 GB Page-ins
962 MB Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
When the error list is open, my LabVIEW 8.2 slows down dramatically.
When the error list is open, my LabVIEW 8.2 slows down dramatically. I am also using a project window and LabVIEW DSC with shared variables. Has anyone seen this before and is there a fix.
Thanks,
Sean
Message Edited by SeanWat on 01-04-2007 01:47 PMWhile using 7.1 on a very old, slow, broken computer I experienced a slow down while my complex VI was running and my error window was open. I also experienced a similar slow down when I opened pretty much anything on that computer...
Are you operating on a very old, slow, and broken computer? Or perhaps you are experiencing a memory leak? -
New Mac has slowed down dramatically
My mac is only a few weeks old and I have noticed that it has slowed down dramatically. It takes quite awhile for programs to load. The fill-in boxes are not keeping up with my typing and it is getting quite annoying. I am new to Imac, so I am not sure how to go about checking the processing speed, etc. Any help would be appreciated.
Check out this thread:
http://discussions.apple.com/thread.jspa?messageID=7114123 -
Running Lightroom 6 on Windows machine (after having upgraded from LR5... While attempting to add or change music in the Slideshow module, LR unexpectedly quits. After several attempts at this, LR6 won't even launch properly...shows the splash screen but that's it. The program is buggy...need an update/revision quickly!!
If you're on Windows, check out a free program called Audacity--it's fantastic. With Audacity the process of converting a 48.000 kHz to 44.100 kHz is as simply as opening, changing the sample rate, and then exporting again, as an MP3.
-
Ipad2 very slow and crashing after OS8 upgrade 8.1.1
ipad2 very slow and crashing after OS8 upgrade 8.1.1. I have tried to restore, using the iCloud backup (twice) and it works well for a short while then slows and crashes again. Genius bar help said older versions of OS8 never closed apps, so a restore should fix it, but it didn't, even with a repeat.
Hello joey:
Try resetting Safari
Trash the preference file and restart (com.apple.safari.plist).
Barry -
Not able to sort any grid after Tools upgrade from 8.49.10 to 8.50.07
Not able to sort any grid after Tools upgrade from 8.49.10 to 8.50.07, also when I click on any prompt button the prompt values are displaying in a separate screen rather than displaying in a model window.
I have resolved it by applying stylesheets and clearing the cache.
Thanks,
Jayaprakash Tedla -
Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013
Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013
Newform.aspx of list:-
Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?Hello dcakumar,
Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
- Dennis | Netherlands | Blog |
Twitter -
After MAR upgrade from 4.0 - 7.0 login to ars_db fails
Hi,
After MAR upgrade from 4.0 -> 7.0 login to ars_db fails with the message "inconsistent database structure". For me it is a bit weired to do the ars_db upgrade to 7.0 SP4 and then start the transport agent which is still in the 4.0 level but this is the way it is described in the upgrade guide in order to delete Blobs after MAR upgrade.
Is the guide here inconsistent? Don't we have to upgrade the tools and services first before deleting Blobs?
Did anyone experience similar issues?
Regards
WhityHello Whity
After upgrading the MAR,To upgrade the MRS Tools and Services follow the steps below:
1. Stop and uninstall the 4.0 Transport Agent Service. Use the Transport Installer to
uninstall the above services.
2. If you are not able to uninstall the TA, uninstall the service manually using the following command sc delete [service name]
.Also check that there are no entry for that service at the registry location HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
3. On your local copy of the Upgrade DVD open the folder Mobile_Client_Upgrade\UpgradePurposeOnly . If you upgrade from CRM 4.0 you have to run SETUP.exe. If you upgrade from a higher release you have to run UPGRADE.exe
4. Install the Transport Service again after MRS tools and services are upgraded to 7.0 SP 04.
In your case, TA was not uninstalled pripr to the MRS tools and servcies upgrade.Hence you still see 4.0 TA. Please follow the above steps to solve the issue.
Please refer to the section 5.2.7 section of the upgrade guide document for more information.
Regards
shankar -
Iweb doesn't see my old domains under 10.9 after the upgrade from 10.7 Please help
Hi everybody,
iweb doesn't see my old domains under 10.9 after the upgrade from 10.7 Please help
It gives me an option to choose a domain but when I go to "sites" it doesn't recognize none of them.
Thanks :-)In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
To open your domain file in Lion, Mountain Lion or Mavericks or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT -
Can logic express slow down or change the key from playbacks like the program "Amazing slowdowner"?r
Hello,
I'm a new member and I'm actually trying to work with garage band to record voice and playback. Can "logic express" Vs. 8.0 slow down or change the key from playbacks like the program "Amazing slowdowner"? This is a programm wich costs 50 US Dollar and I want to decide if i buy it or not.
What is the hgreatest different between "garage band" and logic express 8.0? Who can hepl me, which is the right thing for me. I find it difficult to find out which effects are the best only to record my voice with playback.
Thanks for your advices.If you want to slow down the audio why not download a program from ABRSM called Speedshifter- its free and is very good. you could export the audio from Logic and open the MP3 file with speed shifter. I think speedshifter may also have the ability to alter the pitch as well. I use it for Flute practice- its very useful !
-
After I upgrade from tiger to snow leopard, my macbook pro more often freezes. Any solution? Do I need to increase memory? If so, how?
After I upgrade from tiger to snow leopard, my macbook pro more often freezes. Any solution? Do I need to increase memory? If so, how?
-
Slow down Database after upgrading to 10.2.0.5
Hi
I am having performance problems after upgrading to 10.2.0.5
At the beginning I thought the problem was sga too smalle ( ini: 598M , now 1408M ) but even after recreating the database with the new value the problem remains.
I am sending reports so that someone could give me an idea.
Thanks in advance!
DETAILED ADDM REPORT FOR TASK 'TASK_240' WITH ID 240
Analysis Period: 22-JUN-2011 from 08:34:06 to 16:00:13
Database ID/Instance: 2462860799/1
Database/Instance Names: DXT/DXT
Host Name: thoracle
Database Version: 10.2.0.5.0
Snapshot Range: from 71 to 78
Database Time: 6726 seconds
Average Database Load: .3 active sessions
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
FINDING 1: 38% impact (2540 seconds)
SQL statements consuming significant database time were found.
RECOMMENDATION 1: SQL Tuning, 26% benefit (1763 seconds)
ACTION: Investigate the SQL statement with SQL_ID "30rku9qg2y30j" for
possible performance improvements.
RELEVANT OBJECT: SQL statement with SQL_ID 30rku9qg2y30j and
PLAN_HASH 2734400036
select a.owner, a.object_name, INSTR(a.object_type, :"SYS_B_00"),
:"SYS_B_01" from sys.all_objects a where a.object_type IN
(:"SYS_B_02",:"SYS_B_03") and a.status = :"SYS_B_04" and a.owner
like:"SYS_B_05"escape:"SYS_B_06" and a.object_name
like:"SYS_B_07"escape:"SYS_B_08" union all select c.owner,
c.synonym_name, INSTR(a.object_type, :"SYS_B_09"), :"SYS_B_10" from
sys.all_objects a, sys.all_synonyms c where c.table_owner = a.owner
and c.table_name = a.object_name and a.object_type IN
(:"SYS_B_11",:"SYS_B_12") and a.status = :"SYS_B_13" and c.owner
like:"SYS_B_14"escape:"SYS_B_15" and c.synonym_name
like:"SYS_B_16"escape:"SYS_B_17" union all select distinct b.owner,
CONCAT(b.package_name, :"SYS_B_18" || b.object_name),
min(b.position), max(b.overload) from sys.all_arguments b where
b.package_name IS NOT NULL and b.owner
like:"SYS_B_19"escape:"SYS_B_20" and b.package_name
like:"SYS_B_21"escape:"SYS_B_22" group by b.owner,
CONCAT(b.package_name, :"SYS_B_23" || b.object_name) union all select
distinct c.owner, CONCAT(c.synonym_name, :"SYS_B_24" ||
b.object_name), min(b.position), max(b.overload) from
sys.all_arguments b, sys.all_synonyms c where c.table_owner = b.owner
and c.table_name = b.package_name and b.package_name IS NOT NULL and
c.owner like:"SYS_B_25"escape:"SYS_B_26" and c.synonym_name
like:"SYS_B_27"escape:"SYS_B_28" group by c.owner,
CONCAT(c.synonym_name, :"SYS_B_29" || b.object_name) union all select
distinct c.owner, c.synonym_name, min(b.position), max(b.overload)
from sys.all_arguments b, sys.all_synonyms c where c.owner = b.owner
and c.table_owner=b.package_name and c.table_name=b.object_name and
c.owner like:"SYS_B_30"escape:"SYS_B_31" and c.synonym_name
like:"SYS_B_32"escape:"SYS_B_33" group by c.owner, c.synonym_name
RATIONALE: SQL statement with SQL_ID "30rku9qg2y30j" was executed 12270
times and had an average elapsed time of 0.036 seconds.
RATIONALE: Waiting for event "cursor: pin S wait on X" in wait class
"Concurrency" accounted for 7% of the database time spent in
processing the SQL statement with SQL_ID "30rku9qg2y30j".
RECOMMENDATION 2: SQL Tuning, 23% benefit (1550 seconds)
ACTION: Run SQL Tuning Advisor on the SQL statement with SQL_ID
"7yv1ba0c8y86t".
RELEVANT OBJECT: SQL statement with SQL_ID 7yv1ba0c8y86t and
PLAN_HASH 2684283631
Select WSTJ_.ROWID, WSTJ_.*, WMVD_.*
From THPR.STOJOU WSTJ_, THPR.SMVTD WMVD_ Where ((WMVD_.VCRTYP_0(+) =
WSTJ_.VCRTYP_0) AND (WMVD_.VCRNUM_0(+) = WSTJ_.VCRNUM_0) AND
(WMVD_.VCRLIN_0(+) = WSTJ_.VCRLIN_0))
And WMVD_.CCE2_0 = :1 And WSTJ_.IPTDAT_0 <= :2 And
Substr(WMVD_.ITMDES1_0,:"SYS_B_0",:"SYS_B_1") <> :3 And
Substr(WMVD_.ITMDES1_0,:"SYS_B_2",:"SYS_B_3") <> :4 And
Substr(WMVD_.ITMDES1_0,:"SYS_B_4",:"SYS_B_5") <> :5 And
((WSTJ_.TRSFAM_0 = :6) Or (WSTJ_.TRSFAM_0 = :7))
Order by WSTJ_.STOFCY_0,WSTJ_.UPDCOD_0,WSTJ_.ITMREF_0,WSTJ_.IPTDAT_0
Desc,WSTJ_.MVTSEQ_0,WSTJ_.MVTIND_0
RATIONALE: SQL statement with SQL_ID "7yv1ba0c8y86t" was executed 47
times and had an average elapsed time of 32 seconds.
RECOMMENDATION 3: SQL Tuning, 14% benefit (926 seconds)
ACTION: Use bigger fetch arrays while fetching results from the SELECT
statement with SQL_ID "7yv1ba0c8y86t".
RELEVANT OBJECT: SQL statement with SQL_ID 7yv1ba0c8y86t and
PLAN_HASH 2684283631
Select WSTJ_.ROWID, WSTJ_.*, WMVD_.*
From THPR.STOJOU WSTJ_, THPR.SMVTD WMVD_ Where ((WMVD_.VCRTYP_0(+) =
WSTJ_.VCRTYP_0) AND (WMVD_.VCRNUM_0(+) = WSTJ_.VCRNUM_0) AND
(WMVD_.VCRLIN_0(+) = WSTJ_.VCRLIN_0))
And WMVD_.CCE2_0 = :1 And WSTJ_.IPTDAT_0 <= :2 And
Substr(WMVD_.ITMDES1_0,:"SYS_B_0",:"SYS_B_1") <> :3 And
Substr(WMVD_.ITMDES1_0,:"SYS_B_2",:"SYS_B_3") <> :4 And
Substr(WMVD_.ITMDES1_0,:"SYS_B_4",:"SYS_B_5") <> :5 And
((WSTJ_.TRSFAM_0 = :6) Or (WSTJ_.TRSFAM_0 = :7))
Order by WSTJ_.STOFCY_0,WSTJ_.UPDCOD_0,WSTJ_.ITMREF_0,WSTJ_.IPTDAT_0
Desc,WSTJ_.MVTSEQ_0,WSTJ_.MVTIND_0
FINDING 2: 37% impact (2508 seconds)
Time spent on the CPU by the instance was responsible for a substantial part
of database time.
RECOMMENDATION 1: SQL Tuning, 26% benefit (1763 seconds)
ACTION: Investigate the SQL statement with SQL_ID "30rku9qg2y30j" for
possible performance improvements.
RELEVANT OBJECT: SQL statement with SQL_ID 30rku9qg2y30j and
PLAN_HASH 2734400036
select a.owner, a.object_name, INSTR(a.object_type, :"SYS_B_00"),
:"SYS_B_01" from sys.all_objects a where a.object_type IN
(:"SYS_B_02",:"SYS_B_03") and a.status = :"SYS_B_04" and a.owner
like:"SYS_B_05"escape:"SYS_B_06" and a.object_name
like:"SYS_B_07"escape:"SYS_B_08" union all select c.owner,
c.synonym_name, INSTR(a.object_type, :"SYS_B_09"), :"SYS_B_10" from
sys.all_objects a, sys.all_synonyms c where c.table_owner = a.owner
and c.table_name = a.object_name and a.object_type IN
(:"SYS_B_11",:"SYS_B_12") and a.status = :"SYS_B_13" and c.owner
like:"SYS_B_14"escape:"SYS_B_15" and c.synonym_name
like:"SYS_B_16"escape:"SYS_B_17" union all select distinct b.owner,
CONCAT(b.package_name, :"SYS_B_18" || b.object_name),
min(b.position), max(b.overload) from sys.all_arguments b where
b.package_name IS NOT NULL and b.owner
like:"SYS_B_19"escape:"SYS_B_20" and b.package_name
like:"SYS_B_21"escape:"SYS_B_22" group by b.owner,
CONCAT(b.package_name, :"SYS_B_23" || b.object_name) union all select
distinct c.owner, CONCAT(c.synonym_name, :"SYS_B_24" ||
b.object_name), min(b.position), max(b.overload) from
sys.all_arguments b, sys.all_synonyms c where c.table_owner = b.owner
and c.table_name = b.package_name and b.package_name IS NOT NULL and
c.owner like:"SYS_B_25"escape:"SYS_B_26" and c.synonym_name
like:"SYS_B_27"escape:"SYS_B_28" group by c.owner,
CONCAT(c.synonym_name, :"SYS_B_29" || b.object_name) union all select
distinct c.owner, c.synonym_name, min(b.position), max(b.overload)
from sys.all_arguments b, sys.all_synonyms c where c.owner = b.owner
and c.table_owner=b.package_name and c.table_name=b.object_name and
c.owner like:"SYS_B_30"escape:"SYS_B_31" and c.synonym_name
like:"SYS_B_32"escape:"SYS_B_33" group by c.owner, c.synonym_name
RATIONALE: SQL statement with SQL_ID "30rku9qg2y30j" was executed 12270
times and had an average elapsed time of 0.036 seconds.
RATIONALE: Waiting for event "cursor: pin S wait on X" in wait class
"Concurrency" accounted for 7% of the database time spent in
processing the SQL statement with SQL_ID "30rku9qg2y30j".
RATIONALE: Average CPU used per execution was 0.036 seconds.
RECOMMENDATION 2: SQL Tuning, 23% benefit (1550 seconds)
ACTION: Run SQL Tuning Advisor on the SQL statement with SQL_ID
"7yv1ba0c8y86t".
RELEVANT OBJECT: SQL statement with SQL_ID 7yv1ba0c8y86t and
PLAN_HASH 2684283631
Select WSTJ_.ROWID, WSTJ_.*, WMVD_.*
From THPR.STOJOU WSTJ_, THPR.SMVTD WMVD_ Where ((WMVD_.VCRTYP_0(+) =
WSTJ_.VCRTYP_0) AND (WMVD_.VCRNUM_0(+) = WSTJ_.VCRNUM_0) AND
(WMVD_.VCRLIN_0(+) = WSTJ_.VCRLIN_0))
And WMVD_.CCE2_0 = :1 And WSTJ_.IPTDAT_0 <= :2 And
Substr(WMVD_.ITMDES1_0,:"SYS_B_0",:"SYS_B_1") <> :3 And
Substr(WMVD_.ITMDES1_0,:"SYS_B_2",:"SYS_B_3") <> :4 And
Substr(WMVD_.ITMDES1_0,:"SYS_B_4",:"SYS_B_5") <> :5 And
((WSTJ_.TRSFAM_0 = :6) Or (WSTJ_.TRSFAM_0 = :7))
Order by WSTJ_.STOFCY_0,WSTJ_.UPDCOD_0,WSTJ_.ITMREF_0,WSTJ_.IPTDAT_0
Desc,WSTJ_.MVTSEQ_0,WSTJ_.MVTIND_0
RATIONALE: SQL statement with SQL_ID "7yv1ba0c8y86t" was executed 47
times and had an average elapsed time of 32 seconds.
RATIONALE: Average CPU used per execution was 32 seconds.
RECOMMENDATION 3: SQL Tuning, 5.8% benefit (390 seconds)
ACTION: Run SQL Tuning Advisor on the SQL statement with SQL_ID
"cbtd2nt52qn1c".
RELEVANT OBJECT: SQL statement with SQL_ID cbtd2nt52qn1c and
PLAN_HASH 2897530229
Select DAE_.ROWID, DAE_.*, HAE_.*
From THPR.GACCENTRYD DAE_, THPR.GACCENTRY HAE_ Where ((HAE_.TYP_0(+)
= DAE_.TYP_0) AND (HAE_.NUM_0(+) = DAE_.NUM_0))
And HAE_.CPY_0 = :1 And HAE_.ACCDAT_0 >= :2 And HAE_.ACCDAT_0 <= :3
And DAE_.ACC_0 = :4 And HAE_.FCY_0 >= :5 And HAE_.FCY_0 <= :6
Order by DAE_.BPR_0,DAE_.CUR_0,DAE_.ACC_0
RATIONALE: SQL statement with SQL_ID "cbtd2nt52qn1c" was executed 12980
times and had an average elapsed time of 0.03 seconds.
RATIONALE: Average CPU used per execution was 0.029 seconds.
RECOMMENDATION 4: SQL Tuning, 2.1% benefit (138 seconds)
ACTION: Run SQL Tuning Advisor on the SQL statement with SQL_ID
"33t7fszkr29gy".
RELEVANT OBJECT: SQL statement with SQL_ID 33t7fszkr29gy and
PLAN_HASH 2684283631
Select WSTJ_.ROWID, WSTJ_.*, WMVD_.*
From THPR.STOJOU WSTJ_, THPR.SMVTD WMVD_ Where ((WMVD_.VCRTYP_0(+) =
WSTJ_.VCRTYP_0) AND (WMVD_.VCRNUM_0(+) = WSTJ_.VCRNUM_0) AND
(WMVD_.VCRLIN_0(+) = WSTJ_.VCRLIN_0))
And WMVD_.CCE2_0 = :1 And WSTJ_.IPTDAT_0 <= :2 And
Substr(WMVD_.ITMDES1_0,:"SYS_B_0",:"SYS_B_1") <> :3 And
Substr(WMVD_.ITMDES1_0,:"SYS_B_2",:"SYS_B_3") <> :4 And
Substr(WMVD_.ITMDES1_0,:"SYS_B_4",:"SYS_B_5") <> :5 And
(((WSTJ_.TRSFAM_0 = :6) Or (WSTJ_.TRSFAM_0 = :7)))
Order by WSTJ_.STOFCY_0,WSTJ_.UPDCOD_0,WSTJ_.ITMREF_0,WSTJ_.IPTDAT_0
Desc,WSTJ_.MVTSEQ_0,WSTJ_.MVTIND_0
RATIONALE: SQL statement with SQL_ID "33t7fszkr29gy" was executed 1
times and had an average elapsed time of 136 seconds.
RATIONALE: Average CPU used per execution was 138 seconds.
FINDING 3: 15% impact (1008 seconds)
SQL statements with the same text were not shared because of cursor
environment mismatch. This resulted in additional hard parses which were
consuming significant database time.
RECOMMENDATION 1: Application Analysis, 15% benefit (1008 seconds)
ACTION: Look for top reason for cursor environment mismatch in
V$SQL_SHARED_CURSOR.
ADDITIONAL INFORMATION:
Common causes of environment mismatch are session NLS settings, SQL
trace settings and optimizer parameters.
SYMPTOMS THAT LED TO THE FINDING:
SYMPTOM: Hard parsing of SQL statements was consuming significant
database time. (20% impact [1336 seconds])
SYMPTOM: Contention for latches related to the shared pool was
consuming significant database time. (2% impact [135
seconds])
INFO: Waits for "cursor: pin S wait on X" amounted to 1% of
database time.
SYMPTOM: Wait class "Concurrency" was consuming significant
database time. (2.3% impact [154 seconds])
FINDING 4: 8.5% impact (570 seconds)
Wait class "User I/O" was consuming significant database time.
NO RECOMMENDATIONS AVAILABLE
ADDITIONAL INFORMATION:
Waits for I/O to temporary tablespaces were not consuming significant
database time.
The throughput of the I/O subsystem was not significantly lower than
expected.
FINDING 5: 5.3% impact (355 seconds)
The SGA was inadequately sized, causing additional I/O or hard parses.
RECOMMENDATION 1: DB Configuration, 3.2% benefit (215 seconds)
ACTION: Increase the size of the SGA by setting the parameter
"sga_target" to 1740 M.
ADDITIONAL INFORMATION:
The value of parameter "sga_target" was "1392 M" during the analysis
period.
SYMPTOMS THAT LED TO THE FINDING:
SYMPTOM: Hard parsing of SQL statements was consuming significant
database time. (20% impact [1336 seconds])
SYMPTOM: Contention for latches related to the shared pool was
consuming significant database time. (2% impact [135
seconds])
INFO: Waits for "cursor: pin S wait on X" amounted to 1% of
database time.
SYMPTOM: Wait class "Concurrency" was consuming significant
database time. (2.3% impact [154 seconds])
SYMPTOM: Wait class "User I/O" was consuming significant database time.
(8.5% impact [570 seconds])
INFO: Waits for I/O to temporary tablespaces were not consuming
significant database time.
The throughput of the I/O subsystem was not significantly lower
than expected.
FINDING 6: 4.2% impact (281 seconds)
Cursors were getting invalidated due to DDL operations. This resulted in
additional hard parses which were consuming significant database time.
RECOMMENDATION 1: Application Analysis, 4.2% benefit (281 seconds)
ACTION: Investigate appropriateness of DDL operations.
SYMPTOMS THAT LED TO THE FINDING:
SYMPTOM: Hard parsing of SQL statements was consuming significant
database time. (20% impact [1336 seconds])
SYMPTOM: Contention for latches related to the shared pool was
consuming significant database time. (2% impact [135
seconds])
INFO: Waits for "cursor: pin S wait on X" amounted to 1% of
database time.
SYMPTOM: Wait class "Concurrency" was consuming significant
database time. (2.3% impact [154 seconds])
FINDING 7: 4% impact (266 seconds)
Waits on event "log file sync" while performing COMMIT and ROLLBACK operations
were consuming significant database time.
RECOMMENDATION 1: Host Configuration, 4% benefit (266 seconds)
ACTION: Investigate the possibility of improving the performance of I/O
to the online redo log files.
RATIONALE: The average size of writes to the online redo log files was
26 K and the average time per write was 2 milliseconds.
SYMPTOMS THAT LED TO THE FINDING:
SYMPTOM: Wait class "Commit" was consuming significant database time.
(4% impact [266 seconds])
FINDING 8: 2.9% impact (192 seconds)
Soft parsing of SQL statements was consuming significant database time.
RECOMMENDATION 1: Application Analysis, 2.9% benefit (192 seconds)
ACTION: Investigate application logic to keep open the frequently used
cursors. Note that cursors are closed by both cursor close calls and
session disconnects.
RECOMMENDATION 2: DB Configuration, 2.9% benefit (192 seconds)
ACTION: Consider increasing the maximum number of open cursors a session
can have by increasing the value of parameter "open_cursors".
ACTION: Consider increasing the session cursor cache size by increasing
the value of parameter "session_cached_cursors".
RATIONALE: The value of parameter "open_cursors" was "800" during the
analysis period.
RATIONALE: The value of parameter "session_cached_cursors" was "20"
during the analysis period.
SYMPTOMS THAT LED TO THE FINDING:
SYMPTOM: Contention for latches related to the shared pool was consuming
significant database time. (2% impact [135 seconds])
INFO: Waits for "cursor: pin S wait on X" amounted to 1% of database
time.
SYMPTOM: Wait class "Concurrency" was consuming significant database
time. (2.3% impact [154 seconds])
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ADDITIONAL INFORMATION
Wait class "Application" was not consuming significant database time.
Wait class "Configuration" was not consuming significant database time.
Wait class "Network" was not consuming significant database time.
Session connect and disconnect calls were not consuming significant database
time.
The database's maintenance windows were active during 100% of the analysis
period.
The analysis of I/O performance is based on the default assumption that the
average read time for one database block is 10000 micro-seconds.
An explanation of the terminology used in this report is available when you
run the report with the 'ALL' level of detail.user12023161 wrote:
I have upgraded 10.2.0.3.0 to 10.2.0.5.0 and facing same issue. The database is slow in general after upgrade compared to 10.2.0.3.0.Try setting OPTIMIZER_FEATURE_ENABLE parameter to 10.2.0.3.
Refer following link:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams142.htm
Maybe you are looking for
-
Double click in ALV tree output????
Hi all, I am able to display output in tree format. But I want to add the double click functionality to some of the fields in output. Means if I double click on some value in output tree, it should call some transaction. Please help me with this issu
-
As of 6AM Windows Update Synchronization was still working. Around 9AM I installed the web application service point and web application service roles, and assigned a certificate to port 443 in IIS for the web application catalog. I noticed after n
-
Add custom field in SOCO search
hi i checked in webdynpro component of SOCO search screen i got below info Structure /SAPSRM/S_CLL_WKL_SEARCH Method /SAPSRM/IF_CLL_DODM_WKL_SEARCH~SEARCH View V_WKL_SEARCH component /SAPSRM/WDC_DODC_WKL_SRCH now there is alread
-
IDoc Error: No recipient found for IDoc message type in the ALE model...
Hello Experts, I just created an IDoc for purchase orders and when I try to test it after releasing the PO, an error is shown in the processing log saying that there are no recipients found for my message type of the IDoc. I refrenced it against a wo
-
AOL suddenly stopped working on my iMac. I have tried trashing the preference folder, and also trashing and reinstalling the software. Every time it tries to open I get a message that the program has "quit unexpectedly". Does anyone know what to try