Screen Sharing started acting funny with both iChat and Back-to-my-Mac

For some reason my Screen Sharing, whether via iChat or BTMM, started acting funny: I still connect, but now my cursor shows up about 1" to the right of where it's actually pointing (i.e., if I position the cursor on one icon on the large size Dock, and click, it will start the icon to its left); and when I move the cursor, sometimes it appears followed by a trailing stream of cursors; finally, if I can manage to move a window on the screen, it looks like only half or so of the window moves, and the rest of the window stays put.
Anybody else experiencing this problem? Thanks in advance.

Ralph, you are awesome! Someone on the Remote Mac had done a <ctr>l plus <alt> plus "+" and zoomed up the screen once or twice. When I turned Zoom off in System Preferences Universal Access, things went back to being ok.
Thanks so much for the advice. I live in Texas and the remote iMac (with my octogenarian parents) is in Iowam so you saved me!
Nick

Similar Messages

Issues with both iChat and AIM

Recently I have been having issues with both iChat and AIM. I was hoping someone here could shed some light on what the problem may be.
AIM allows me to log-in and chat with people. However, if I close an IM window or Buddy Info window, the AIM program will quit and the "Unexpectedly Quit" notice will pop up.
In regards to iChat, I did a clean install of iChat using the Tiger install disk. However, when I launch iChat and go through the initial setup it freezes up and I get the spinning rainbow and have no choice but to do a force quit.
Any ideas as to what the problem may be?

Hi
Seeing you re-installed iChat you will need to run the 10.4.10combo http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10410comboupdat eppc.html to bring iChat back upto date.
Tony

Problems with Remote Desktop and Back to My Mac

It's impressive how quickly Apple removed my post because of its tone. I hope they respond with equal speed and verve to my concerns.
I need to get Remote Desktop operational. Can someone walk me through the process of getting Remote Desktop to "see" my home computer? The current online video tutorial for Remote Desktop is outdated and no longer resembles the current UI for setting up Remote Desktop.
What about Back to My Mac? Can I get help with that, too? I figure if I can get at least RD or BTMM running properly I'll be able to do what I want to do.

The subject of connecting ARD via the Internet has been covered here many times already (search the forum for "Internet"), but take a look at this web page:
http://www.starkpr.com/ard.htm
It should help, though you may have to refer to your router's documentation for specifics on opening and forward ports in that particular unit.
"Back to my Mac" is a different feature of Mac OS X and has it's own forum:
http://discussions.apple.com/forum.jspa?forumID=1247

Screen Sharing - Unable to use with some users - Version 4.0.8 (619)

Hello,
I got my mom, who is disabled, a year ago an iMac especially because we're not living on the same city and I wanted to be able to help here when problems occurs.
iChat was a great solution but I could never work it out. With some of my friends Screen sharing is working fine, with some not and I could never find a reason why.
I contact apple long time ago, no one answered.
I've don all Port forwarding on our both computer following the instructions here:
http://portforward.com/english/routers/port_forwarding/Edimax/BR-6104K/iChat.htm
I thought if I can connect to others, than that means all my setting are correct.
Still, even though my mom got the same setting and can chat+video with her, I'm unable to do the screen sharing.
I find it very very frustrating.
thank you very much
shlomit

Hi,
The Port Forwarding shown on the Port Forwarding site does include all the ports iChat 3 uses as listed here http://support.apple.com/kb/HT1507
These include port 5060 that iChat 4 does not use and an extended range of A/V ports (20 as opposed to 10 by iChat 4).
However the iChat 4 range of A/V Ports is inside the ichat 3 range so they will work.
What this second Article does not tell you is the iChat Sharing port.
Testing has shown us that this port (which runs along side an Audio Chat) is random.
It seems that for most people this means using UPnP.
I see from the pica at the link you posted your Device has UPnP
I would use that (Disable the Port Forwarding).
Depending on the speed of your Internet Connection you may have to turn Off the DoS setting particularly if your Buddies are on a fast connection and can send you lots of data in Video Chat.
It may also pay to set your Mom's modem/router to do UPnP
7:31 PM Sunday; May 31, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

I did an update last week. My computer started acting funny afterwards and I'm not sure what to do now. I can't open any of my faxes now.

I did an update last week. My computer started acting funny afterwards and I'm not sure what to do now. I can't open any of my faxes now.

Hi paulsaundersdds,
What type of file are those fax documents? Are they PDF files? What are you using to open them with--Acrobat or Reader?
And, what happens when you try to open them? Do you get an error message? If so, what is it?
Best,
Sara

When I used download sets of photos, movies etc, (before I installed Lion) I used always get a "Download" gizmo which showed me the download happening with both speed and time left. Now with Lion, nothing shows on my screen. Can I fix this?

When I used download sets of photos, movies etc, (before I installed Lion) I used always get a "Download" gizmo which showed me the download happening with both speed and time left. Now with Lion, nothing shows on my screen. Can I fix this?

In Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

HT4623 hi i have an iphone 4s and has not been a year yet no water damage but there is a white cloudy screen around the edges and will start going crazy with different colors and all someone please gel what is wrong with it?

hi
i have an iphone 4s and has not been a year yet no water damage but there is a white cloudy screen around the edges and will start going crazy with different colors and all someone please gel what is wrong with it?

I switched the usb port and did the whole recovery holding of the buttons ect... And it worked, the computer detected the phone and i was able to click restore. However, the computer says preparing iphone for restore and it is still doing the restarting thing where the apple fades away and then comes back like it is restarting. If i can somehow get past this i will be able to go back to factory settings and resolve my problem, but this is where i am stuck.

Cisco ISE with both internal and External RADIUS Server

Hi
I have ISE 1.2 , I configured it as management monitor and PSN and it work fine
I would like to know if I can integrate an external radius server and work with both internal and External RADIUS Server simultanously
So some computer (groupe_A in active directory ) will continu to made radius authentication on the ISE internal radius and other computer (groupe_B in active directory) will made radius authentication on an external radius server
I will like to know if it is possible to configure it and how I can do it ?
Thanks in advance for your help
Regards
Blaise

Cisco ISE can function both as a RADIUS server and as a RADIUS proxy server. When it acts as a proxy server, Cisco ISE receives authentication and accounting requests from the network access server (NAS) and forwards them to the external RADIUS server. Cisco ISE accepts the results of the requests and returns them to the NAS.
Cisco ISE can simultaneously act as a proxy server to multiple external RADIUS servers. You can use the external RADIUS servers that you configure here in RADIUS server sequences. The External RADIUS Server page lists all the external RADIUS servers that you have defined in Cisco ISE. You can use the filter option to search for specific RADIUS servers based on the name or description, or both. In both simple and rule-based authentication policies, you can use the RADIUS server sequences to proxy the requests to a RADIUS server.
The RADIUS server sequence strips the domain name from the RADIUS-Username attribute for RADIUS authentications. This domain stripping is not applicable for EAP authentications, which use the EAP-Identity attribute. The RADIUS proxy server obtains the username from the RADIUS-Username attribute and strips it from the character that you specify when you configure the RADIUS server sequence. For EAP authentications, the RADIUS proxy server obtains the username from the EAP-Identity attribute. EAP authentications that use the RADIUS server sequence will succeed only if the EAP-Identity and RADIUS-Username values are the same.

2 days ago both mine and my daughter's macs stopped being able to open up the apple start up page

2 days ago both mine and my daughter's macs stopped being able to open up the apple start up page, search google, yahoo, facebook and many other sites. Pictures won't download on sites and we are redirected to http://www.website-unavailable.com/main?url=www.apple.com%2Fstartpage&w=1280&h=6 21&ifc=0# with an orange O in front, which is OpenDNS Guide page. We live in NW England, has anyone else had similar problems and any suggestions how we can resolve our problem?

Have you tried another browser (chrome, firefox, and checked your router for blocked websites?) and also quit Safari and reopened? Also reset your cookies (Safari > Preferences... > Privacy ), or reset Safari (Safari > Reset..), or Empty Cache (Safari > Empty).

I think I have blown out my USB ports. Plugged eternal drive to USB port; drive also had an AC plug which I plugged in. Screen went white; unplugged external drive (both USB and AC plug). Restarted MAC Pro. Everything came back except USB ports

I think I have blown out my USB ports. Plugged in an external drive to USB, but drive also had an AC connection which I connected. Whole screen went white; unplugged external drive (both AC and USB) and shut down MacPro. Restarted and everything came back except access to USB ports. Have tried to reset PRAM and SMC. No success. Have I blown out the electronic circuitry to my USB ports?

Thanks for the response, but ironically enough, I feel really stupid after posting that because a couple minutes after posting that my DELL mouse started working again, but I honestly don't know how long that'll last. After it started working again, I tried switch which port it's plugged into again, and the other one (the one closest to me) still isn't working. If it stops working again (which it probably will), I'll definitely take it to the Apple Store. But, for some reason almost every time I take a device to the Apple Store, it fixes the problem itself when I get there, and then stops working after I leave (like just now.)
That's happened a couple times, like when my computer was heating up alot, and when my phone's sound kept shutting off by itelf.
Anyways, I want to keep this discussion up just because I know it'll stop working soon. But, yeah, I was planning on taking it to the Apple Store anyways, but I think the earliest I can is probably Saturday or Sunday, so I'll do that then.
Thanks for the response!
Scott

I tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on, i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on

i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on, i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on

Did you try to connect in recovery mode to your computer, explained in this article?
iOS: Unable to update or restore

I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?

I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?

Thanks for that. He is one of the last holdouts in IT so an email address for him would just mean I have 2 to check so that is what I am trying to avoid as we move into retirement:)

Sending emails with both body and attachment to multiple recipients

I have a requirement to send email with body and attachment to multiple recipients.
Body of the email is a standard text. It is a proxy-to-mail scenario.
Here is what I've done: (I'm using PI 7.11)
One mapping from Source to Target structure (format of the attachment text file)
Second mapping from Target Structure to Mail Package format.
In the second mapping I'm concatenating the output of first step into "Content" of the Mail Package.
"XIPAYLOAD" is the message protocol used.
The "Keep attachments" option in the Mail adapter allows only to send "Content" as attachment or as body of the email.
How to send an email with both content and text?
The other problem is even with using ASMA, I can't send email to multiple recipients. I can only do CC and TO for 1 person each - a total of 2. Although I can resolve this by creating mailing lists, it is better if this can be addressed in PI.
Thanks for any input you can provide!
Edited by: crazylad on Jan 18, 2012 3:39 PM

Thank you for your response Mikael.
For the first question, I was able to find the solution in the following blog:
XI Mail Adapter : Dynamically building attachment and message body content using a simple UDF
(I just needed to search with the right set of key words )
The key is to set the "Content Encoding" as "None" in the mail adapter. If this is not done, the mail will be sent with an attachment - untitled.bin containing both the mail body and the attachment text. Also, don't forget to check the "Keep Attachments" checkbox in the mail adapter.
Multiple recipients could be added by separating the email IDs with a Comma. I have used ASMA to set the recipients.

In Creative Cloud, does the $9.99/month Individual Photography plan come with BOTH Lightroom and Photoshop CC?

In Creative Cloud, does the $9.99/month Individual Photography plan come with BOTH Lightroom and Photoshop CC? It is not very clear on the home page. It shows both and mentions both, but doesn't specifically say BOTH come with the monthly $9.99/month plan. Can somebody clarify?

Special Photography Plan
http://helpx.adobe.com/photoshop/kb/differences-photoshop-creative-cloud-photography.html

Screen Sharing started acting funny with both iChat and Back-to-my-Mac

Similar Messages

Maybe you are looking for