Screen Sharing suddenly fails with "Communication Error" in console log. File sharing works fine. Thoughts?

I have been using Lion provided Screen Sharing for months without incident. Suddenly (I do not believe there was an intervening o/s update), it will not connect. I get a "Connection Error" dialog after a minute or two. The console log shows the same thing w/o any useful info. I can share files with the target mac fine and run time machine without error. Any ideas on what's up?
Thanks

Check the host property configured in KM URL generator service.
Navigate to
System Administration -> System Configuration -> Knowledge Management -> Content Management -> Global Services -> (switch to advanced mode) ->URL generator Service -> Host
You should use the fully qualified host name and port.
Regards,
Prasanna Krishnamurthy

Similar Messages

Errors in Console Log file

We are seeing hundreds of these errors in our console log file:
mediaserver automount[4510]: Can't mount servername.domain.ooo.oo:/username on /private/Network/Servers/servername.domain.ooo.oo/username: Invalid argument (22)
Historically, users have had their home areas mount normally in the dock (as specified in our MCX settings for the group they are in), but of late we have been seeing only some of them getting mounted; and more than this the server is suffering random kernel panics throughout the week.
Any idea?
Paul

Hi Paul
That would be the one. Stuff also gets logged in /var/log/system.log.
After a kernel panic you could go into single user command line and just see what got logged perhaps?
tail -30 /var/log/system.log
Shows the last 30 entries. I think this is better than doing the whole log because it would take ages to scroll through it all. You could expand this to the last 50-60 entries. You never know it might log something? For example you may see a shutdown cause error followed by a number -93 or -122. You could review the energy saver settings just to make sure nothing is enabled that should be. Possibly the UPS may want looking at?
Hope this helps, Tony

My offline recordings are suddenly failing with the error: "No suitable decoder module"

Hardware: MBP Retina
Software: OSX 10.9.2 Chrome 34.0.1847.116 (up-to-date)
I have made 12 offline recordings in the past with no trouble. Suddenly, this week, the recording process has stopped working. I have read every article I can find on this issue including the ones on resizing that might potentially explain this. I am not doing any resizing during the recording process.
Here are the new symptoms:
(1) When I start the recording process, there are long loading delays. Both right after I click "make flv" to start the process, and also after I dismiss the screensize warning dialog, there is a 30-second to 1-minute delay where nothing happens.
(2) After the video plays back (which works just fine) the file that is created will not open in VLC, nor can it be interpreted by youtube. The VLC error I get is: "No suitable decoder module."
https://www.dropbox.com/s/tzqrbeuphysnipm/Screenshot%202014-04-24%2009.44.31.png
Any ideas?
Thanks in advance for your help.
Tom Rose
p.s. I have idea where the response to this post is going to go, so I'm not sure how I'll get the answer. There is no place to leave contact information.

i am also getting this error..
Exception in thread "index-/atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin" java.lang.NullPointerException: Property value cannot be null (dimval.display_name)
when i run baseline index...
please suggest the solution

Print to pdf -- add to iPhotos has suddenly failed - with no error message

It appears to work, the workflow at the left of the finder appears as usual, and iphoto opens, but nothing is imported.
It doesn't work from address book or from Preview. (I have always used address book in the past). I don't know when it stopped working, as I don't do it very often.
It still works on laptop (new, but running same OS).

MaryArthur:
Welcome to the Apple Discussions. Another user just reported the same problem. First delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder and try again. Also download and reapply the Mac OS X 10.5.2 Combo Update.
Next open your text editor, type a few lines and run the workflow from there. Be sure you can see the workflow window that comes up asking you to name a new album for the files or select an existing one. It doesn't always come to the front of the other windows, only iPhoto's window. So while the workflow is running hide all the windows but iPhoto's.
If the above doesn't work, log into another account on your Mac and try from there. If you don't have another account it's a good thing to have as it's an excellent troubleshooting tool. Create a non-administrative account with no 3rd party enhancements. If the workflow works there your primary account is causing the problem. It might be another preference file other than iPhoto's. You can determine if that's the problem by the following:
Trouble Shooting Preferences in Leopard
1 - Create a folder titled "Preferences A" on the Desktop.
2 - Open the working Preferences folder, HD/Users/your_name/Library/Preferences, and move the contents to the Preferences A folder on the Desktop.
3 - Make a duplicate copy of the Preferences A folder on the Desktop as a precautionary backup.
4 - With the working Preferences folder empty run the application again and determine if the problems is fixed.
5 - If the problem is fixed:
A - open the working Preferences folder (HD/Users/your_name/Library/Preferences).
B - Open the Preferences A folder on the Desktop, select all of the contents and drag them into the working Preferences folder.
C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace button as seen here.
6 - If the problem is NOT fixed, empty the working Preferencess folder and move the contents of the Preferences folder on the desktop back into it.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Since latest update, my bookmarked site fails with certificate key usage inadequate, why? (It works fine in windows explorer)explorer

This worked the day before I got the "Gettting Started" screen when I started the browser and still works for co-workers who have not gotten the new version of Mozilla firefox.

That could be a problem with the usage of libPKIX in the Firefox 31 and later releases.
* https://blog.mozilla.org/security/2014/04/24/exciting-updates-to-certificate-verification-in-gecko/
It is possible to disable this new feature by disabling libPKIX support, but this is not recommended for security and vulnerability reasons.
*<b>about:config</b> page: security.use_mozillapkix_verification = false

Help with critical error in console log?

this is the message i got today:
Mac OS X Versjon 10.4.9 (bygg 8P2137)
2007-06-04 20:50:54 +0200
2007-06-04 20:51:02.049 SystemUIServer[244] lang is:nb
Jun 4 20:51:02 thomas-dahlens-maskin diskarbitrationd[63]: SystemUIServer [244]:20227 not responding.
** (process:289): CRITICAL **: purpleaccount_getstate: assertion `account != NULL' failed
Have i deleted a wrong file or something?
thanks for any help in advance

still got this tough:
Mac OS X Versjon 10.4.9 (bygg 8P2137)
2007-06-05 04:53:02 +0200
terminate called after throwing an instance of 'vcfoundation::base::VCException'
2007-06-05 04:53:21.942 SystemUIServer[148] lang is:nb
** (process:155): CRITICAL **: purpleaccount_getstate: assertion `account != NULL' failed

Oracle Database Express Edition 11g Release2 11.2.0 silent Installation failing with port8081 error

Hi everyone,
We are trying to create silent(unattended) install package to install Oracle database 11g express edition 11.2.0 silently on our machines. We modified the provided .iss file as per the requirement and tried to install with below command,
setup.exe /verbose /s /f1"c:\DISK1\response\oracleXE-install.iss" /f2"c:\DISK1\oracle_log.txt" /v" /l*v "c:\DISK1\oracle_msi_log.txt""
Installation is failing with below error from the log file,
1: OracleXE-Server-Install-Message: Port 8081 is in use. Specify a different port number.
Installshield 11:22:22: Installation aborts, ready to shut down.
Port 8081 is being used by mcAfee in our organization. We tried passing a different port number for Http in the response file(.iss), but it is failing with same reason. We have searched foruns and found that we need to stop the port8081 during the oracle XE installation and can start it later once the installation is completed. But As port 8081 is being used by McAfee in our organization, we could not stop it even during oracle XE installation as it creates security issues.
I am attaching the MSI log(failure log) and modified .iss(modfied .iss file to .iss.txt to be able to attach) files. Please look into it and suggest how can we achieve silent installation in this case.

Pl see previous discussions about this topic - seems to be a limitation of the silent install process
OracleXE-Server-Install-Message: The 8081 port is in use.

Create database fails with error ORA-01505: error in adding log files

hi all,
hope someone can help me out, I'm trying to create a database using a SQL script, the content of the script is:
create database testora
user sys identified by oracle
user system identified by oracle
logfile group 1 ('/u01/app/oracle/oradata/testora/redo01a.log', '/u02/app/oracle/oradata/testora/redo01b.log') size 100m blocksize 512 reuse,
     group 2 ('/u01/app/oracle/oradata/testora/redo02a.log', '/u02/app/oracle/oradata/testora/redo02b.log') size 100m blocksize 512 reuse,
     group 3 ('/u01/app/oracle/oradata/testora/redo03a.log', '/u02/app/oracle/oradata/testora/redo03b.log') size 100m blocksize 512 reuse,
maxlogfiles 5
maxlogmembers 5
maxdatafiles 100
character set US7ASCII
national character set AL16UTF16
extent management local
datafile '/u01/app/oracle/oradata/testora/system01.dbf' size 400m reuse
sysaux datafile '/u01/app/oracle/oradata/testora/sysaux01.dbf' size 400m reuse
default tablespace users
     datafile '/u02/app/oracle/oradata/testora/users01.dbf' size 500m reuse autoextend on maxsize unlimited
default temporary tablespace tempts1
     tempfile '/u01/app/oracle/oradata/testora/temp01.dbf' size 20m reuse autoextend on maxsize 4g
undo tablespace undotbs1
     datafile '/u01/app/oracle/oradata/testora/undotbs01.dbf' size 200m reuse autoextend on maxsize unlimited
It fails in creating the database with the following output:
SQL> @/home/oracle/Oracle_Scripts/testora_db_script.sql
create database testora
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-01501: CREATE DATABASE failed
ORA-01505: error in adding log files
ORA-01184: logfile group 1 already exists
Process ID: 3486
Session ID: 1 Serial number: 3

sorry to revive this thread but i have one more issue with this. I created a database with DBCA insetead of CREATE DATABASE command and selected option for Fast Recovery Area space. This automatically set initialization parameter db_recovery_file_dest and db_recovery_file_dest_size, but did not create a OMF redo log group, but instead created three redo log groups with 1 member each.
select * from v$logfile returns:
1          ONLINE     /u01/app/oracle/oradata/testdb2/redo01.log     NO
2          ONLINE     /u01/app/oracle/oradata/testdb2/redo02.log     NO
3          ONLINE     /u01/app/oracle/oradata/testdb2/redo03.log     NO
Any idea why if creating a database with create database command and specifying db_recovery_file_dest creates an OMF redo log group and with DBCA it doesn't?

Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares.
When the Volume Shadow Copy service was running under the context of System, this was the error logged:
“failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
Which is likely due to not having permissions to write to the network location.
This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
  Then the error changed to this:
“failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
HRESULT 0x8078006b
DetailedHRESULT 0x8004230f
ErrorMessage %%2155348075
BackupState 12
VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
/></VolumeInfo>
We aren’t really seeing anything that gives any hint on what the issue is.
Any ideas? Thanks in advance!

We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free.
We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there).
  If we try another network location, we receive the exact same error.
This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
Thank you for the link.
Looking in:
Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
But it doesn’t seem to give any more details:
Log Name:
Microsoft-Windows-Backup
Source:
Microsoft-Windows-Backup
Date:
7/8/2013 8:00:12 PM
Event ID:
5
Task Category: None
Level:
Error
Keywords:
User:
SYSTEM
Computer:
servername.edu
Description:
The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>5</EventID>
<Version>3</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
<EventRecordID>30</EventRecordID>
<Correlation />
<Execution ProcessID="3028" ThreadID="3996" />
<Channel>Microsoft-Windows-Backup</Channel>
<Computer>servername.edu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
<Data Name="HRESULT">0x8078006b</Data>
<Data Name="DetailedHRESULT">0x8004230f</Data>
<Data Name="ErrorMessage">%%2155348075</Data>
<Data Name="BackupState">12</Data>
<Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
<Data Name="BackupTarget">\\servername\BACKUP</Data>
<Data Name="NumOfVolumes">2</Data>
<Data Name="VolumesInfo"><VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem
Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /></VolumeInfo></Data>
<Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
<Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="PrepareBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PrepareBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="DVDFormatStartTime"><TimesList></TimesList></Data>
<Data Name="DVDFormatEndTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyStartTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyEndTime"><TimesList></TimesList></Data>
<Data Name="BackupPreviousState">2</Data>
<Data Name="ComponentStatus"><ComponentStatus></ComponentStatus></Data>
<Data Name="ComponentInfo"><ComponentInfo></ComponentInfo></Data>
<Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SystemStateBackup"><SystemState IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="BMR"><BMR IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="VssFullBackup">false</Data>
<Data Name="UserInputBMR">false</Data>
<Data Name="UserInputSSB">false</Data>
<Data Name="BackupSuccessLogPath">
</Data>
<Data Name="BackupFailureLogPath">
</Data>
<Data Name="EnumerateBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="EnumerateBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupFlags">0x9</Data>
<Data Name="ComponentInfoSummary"><ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /></Data>
</EventData>
</Event>

ERROR = CONNECT failed with sql error '12518'

Hi All,
OS Win 2003 - 32 Bit, Database - Oracle 10.2.0.2 , I am facing this from yesterday, suddenly SAP was done and when i am checking the logs it is not able to connect to the database.
I have checked the services for oracle - service was down, i have started the oracleService<SID> and also i have restarted the listener.. after this when i am trying to start the SAP through MMC again the problem is face.. and also the oracle service is stopped. when i tried starting the database from OS level it was giving me error like
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-03113: end-of-file on communication channel
again the Oracle service is stopped i am not getting why the oracle service is stopping..
dev_w*.log
Thu Apr 09 10:33:50 2009
M calling db_connect ...
C Prepending D:\usr\sap\SID\DVEBMGS01\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@SID on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   05C84528   05C89AC4   05C8934C
C Attaching to DB Server SID (con_hdl=0,svchp=05C89298,svrhp=05C9AB64)
C
C Thu Apr 09 10:33:51 2009
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12518
[dboci.c      4172]
C *** ERROR => CONNECT failed with sql error '12518'
[dbsloci.c    10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@SM3 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   05C84528   05C89AC4   05C8934C
C Detaching from DB Server (con_hdl=0,svchp=05C89298,srvhp=05C9AB64)
C Attaching to DB Server SID (con_hdl=0,svchp=05C89298,svrhp=05C9AB64)
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12518
[dboci.c      4172]
C *** ERROR => CONNECT failed with sql error '12518'
[dbsloci.c    10933]
B ***LOG BY2=> sql error 12518 performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY0=> ORA-12518: TNS:listener could not hand off client connection [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY2=> sql error 12518 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-12518: TNS:listener could not hand off client connection [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10156]
M
M Info for wp 16
M
M    stat = 4
M    reqtype = 6
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    vm = V-1
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server hostname_SM3_01 on host tcs042619 (wp 16)
M * ERROR       ThInit: db_connect
M *
M * TIME        Thu Apr 09 10:33:51 2009
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10354
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc16 7988) [dpnttool.c   327]
Any suggestions pls
Mahesh

Hi Rohit,
when i check in the sqlnet.log
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SM2\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
     Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 04-SEP-2007 15:09:30
Tracing not turned on.
Tns error struct:
    ns main err code: 12560
    TNS-12560: Message 12560 not found; No message file for product=NETWORK, facility=TNS
    ns secondary err code: 0
    nt main err code: 530
    TNS-00530: Message 530 not found; No message file for product=NETWORK, facility=TNS
    nt secondary err code: 2
    nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
     Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:16:32
Tracing not turned on.
Tns error struct:
    ns main err code: 12560
    TNS-12560: TNS:protocol adapter error
    ns secondary err code: 0
    nt main err code: 530
    TNS-00530: Protocol adapter error
    nt secondary err code: 2
    nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
     Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:16:46
Tracing not turned on.
Tns error struct:
    ns main err code: 12560
    TNS-12560: TNS:protocol adapter error
    ns secondary err code: 0
    nt main err code: 530
    TNS-00530: Protocol adapter error
    nt secondary err code: 2
    nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
     Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:19:27
Tracing not turned on.
Tns error struct:
    ns main err code: 12560
    TNS-12560: TNS:protocol adapter error
    ns secondary err code: 0
    nt main err code: 530
    TNS-00530: Protocol adapter error
    nt secondary err code: 2
    nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
     Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:19:28
Tracing not turned on.
Tns error struct:
    ns main err code: 12560
    TNS-12560: TNS:protocol adapter error
    ns secondary err code: 0
    nt main err code: 530
    TNS-00530: Protocol adapter error
    nt secondary err code: 2
    nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
     Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:19:29
Tracing not turned on.
Tns error struct:
    ns main err code: 12560
    TNS-12560: TNS:protocol adapter error
    ns secondary err code: 0
    nt main err code: 530
    TNS-00530: Protocol adapter error
    nt secondary err code: 2
    nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
     Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:26:38
Tracing not turned on.
Tns error struct:
    ns main err code: 12560
    TNS-12560: TNS:protocol adapter error
    ns secondary err code: 0
    nt main err code: 530
    TNS-00530: Protocol adapter error
    nt secondary err code: 2
    nt OS err code: 0
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=hostname)(PORT=1527))(CONNECT_DATA=(SID=SID)(GLOBAL_NAME=SID.WORLD)(CID=(PROGRAM=D:\usr\sap\SID\SYS\exe\uc\NTI386\R3trans.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 20:35:23
Tracing not turned on.
Tns error struct:
    ns main err code: 12564
    TNS-12564: TNS:connection refused
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=hostname)(PORT=1527))(CONNECT_DATA=(SID=SID)(GLOBAL_NAME=SID.WORLD)(CID=(PROGRAM=D:\usr\sap\SID\SYS\exe\uc\NTI386\R3trans.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 20:35:23
Tracing not turned on.
Tns error struct:
    ns main err code: 12564
    TNS-12564: TNS:connection refused
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
     Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 09-APR-2009 09:15:43
Tracing not turned on.
Tns error struct:
    ns main err code: 12560
    TNS-12560: TNS:protocol adapter error
    ns secondary err code: 0
    nt main err code: 530
    TNS-00530: Protocol adapter error
    nt secondary err code: 2
    nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
     Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 09-APR-2009 09:17:28
Tracing not turned on.
Tns error struct:
    ns main err code: 12560
    TNS-12560: TNS:protocol adapter error
    ns secondary err code: 0
    nt main err code: 530
    TNS-00530: Protocol adapter error
    nt secondary err code: 2
    nt OS err code: 0
This error occured when the oracle service was not started..
Mahesh..

Cube refresh fails with an error below

Hi,
We are experiencing this problem below during planning application database refresh. We have been refreshing the database everyday, but all of a sudden the below error is appearing in log. The error is something like below:
Cube refresh failed with error: java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.EOFException
When the database refresh is done from workspace manually, the database refresh is happening successfully. But when triggered from unix script, its throwing the above error.
Is it related to some provisioning related issue for which user has been removed from MSAD?? Please help me out on this.
Thanks,
mani
Edited by: sdid on Jul 29, 2012 11:16 PM

I work with 'sdid' and here is a better explaination of what exactly is going on -
As part of our nightly schedule we have a unix shell script that executes refresh of essbase cubes from planning using the 'CubeRefresh.sh' shell script.
Here is how our shell looks like -
/opt/hyperion/Planning/bin/CubeRefresh.sh /A:<cube name> /U:<user id> /P:<password> /R /D /FS
Here is what 'CubeRefresh.sh' looks like -
PLN_JAR_PATH=/opt/hyperion/Planning/bin
export PLN_JAR_PATH
. "${PLN_JAR_PATH}/setHPenv.sh"
"${HS_JAVA_HOME}/bin/java" -classpath ${CLASSPATH} com.hyperion.planning.HspCubeRefreshCmd $1 $2 $3 $4 $5 $6 $7
And here is what 'setHPenv.sh' looks like -
HS_JAVA_HOME=/opt/hyperion/common/JRE/Sun/1.5.0
export HS_JAVA_HOME
HYPERION_HOME=/opt/hyperion
export HYPERION_HOME
PLN_JAR_PATH=/opt/hyperion/Planning/lib
export PLN_JAR_PATH
PLN_PROPERTIES_PATH=/opt/hyperion/deployments/Tomcat5/HyperionPlanning/webapps/HyperionPlanning/WEB-INF/classes
export PLN_PROPERTIES_PATH
CLASSPATH=${PLN_JAR_PATH}/HspJS.jar:${PLN_PROPERTIES_PATH}:${PLN_JAR_PATH}/hbrhppluginjar:${PLN_JAR_PATH}/jakarta-regexp-1.4.
jar:${PLN_JAR_PATH}/hyjdbc.jar:${PLN_JAR_PATH}/iText.jar:${PLN_JAR_PATH}/iTextAsian.jar:${PLN_JAR_PATH}/mail.jar:${PLN_JAR_PA
TH}/jdom.jar:${PLN_JAR_PATH}/dom.jar:${PLN_JAR_PATH}/sax.jar:${PLN_JAR_PATH}/xercesImpl.jar:${PLN_JAR_PATH}/jaxp-api.jar:${PL
N_JAR_PATH}/classes12.zip:${PLN_JAR_PATH}/db2java.zip:${PLN_JAR_PATH}/db2jcc.jar:${HYPERION_HOME}/common/CSS/9.3.1/lib/css-9_
3_1.jar:${HYPERION_HOME}/common/CSS/9.3.1/lib/ldapbp.jar:${PLN_JAR_PATH}/log4j.jar:${PLN_JAR_PATH}/log4j-1.2.8.jar:${PLN_JAR_
PATH}/hbrhppluginjar.jar:${PLN_JAR_PATH}/ess_japi.jar:${PLN_JAR_PATH}/ess_es_server.jar:${PLN_JAR_PATH}/commons-httpclient-3.
0.jar:${PLN_JAR_PATH}/commons-codec-1.3.jar:${PLN_JAR_PATH}/jakarta-slide-webdavlib.jar:${PLN_JAR_PATH}/ognl-2.6.7.jar:${HYPE
RION_HOME}/common/CLS/9.3.1/lib/cls-9_3_1.jar:${HYPERION_HOME}/common/CLS/9.3.1/lib/EccpressoAll.jar:${HYPERION_HOME}/common/
CLS/9.3.1/lib/flexlm.jar:${HYPERION_HOME}/common/CLS/9.3.1/lib/flexlmutil.jar:${HYPERION_HOME}/AdminServices/server/lib/easse
rverplugin.jar:${PLN_JAR_PATH}/interop-sdk.jar:${PLN_JAR_PATH}/HspCopyApp.jar:${PLN_JAR_PATH}/commons-logging.jar:${CLASSPATH
export CLASSPATH
case $OS in
HP-UX)
SHLIB_PATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${SHLIB_PATH:-}
export SHLIB_PATH
SunOS)
LD_LIBRARY_PATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${LD_LIBRARY_PATH:-}
export LD_LIBRARY_PATH
AIX)
LIBPATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${LIBPATH:-}
export LIBPATH
echo "$OS is not supported"
esac
We have not made any changes to either the shell or 'CubeRefresh.sh' or 'setHPenv.sh'
From the past couple of days the shell that executes 'CubeRefresh.sh' has been failing with the error message below.
Cube refresh failed with error: java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.EOFException
This error is causing our Essbase cubes to not get refreshed from Planning cubes through these batch jobs.
On the other hand the manual refesh from within Planning works.
We are on Hyperion® Planning – System 9 - Version : 9.3.1.1.10
Any help on this would be greatly appreciated.
Thanks
Andy
Edited by: Andy_D on Jul 30, 2012 9:04 AM

At DI R3trans fails with this error code ORA-12545, but CI runs

Hello Gurus,
We have our BW System on two instances with a separated oracle database server.
Last week the system was unreachable and we must restarted it hard.
After that, the Listener could started and runs. The DB could started, mounted and opened successfully.
Now we have a special problem.
The central instance can connect at startup to the database. But the dialog instance not.
The DI get the following error:
|> R3trans -x
This is R3trans version 6.14 (release 701 - 12.06.09 - 15:20:00).
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'BW2'"
R3trans finished (0012).
The trans.log entry are:
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '12541'                        17 0.187511
4 ETW000 [dev trc     ,00000]     set_ocica() -> SQL error code 12541                                    13 0.187524
4 ETW000 [dev trc     ,00000] -->oci_get_errmsg (con_hdl=0, rc=12541)                                   14 0.187538
4 ETW000 [dev trc     ,00000]     OCIErrorGet -> SQL error code: 12541                                   14 0.187552
4 ETW000 [dev trc     ,00000]     ORA-12541: TNS:no listener
4 ETW000                                                                                22 0.187574
4 ETW000 [dblink      ,00433] ***LOG BY2=>sql error 12541 performing CON [dblink#4 @ 433]           14396 0.201970
4 ETW000 [dblink      ,00433] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#4 @ 433]                   39 0.202009
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'BW2'"
A telnet connection test to port 1527 are also unsuccessful.
But sporadicly the telnet or R3trans connection are successful, but the second check are unsuccessful.
We have checked the telnet connection to another oracle database server (ERP) at port 1527 and it works.
The CI have some entry's in ST22 with DBIF_RSQL_SQL_ERROR --> ORA-03114: not connected to ORACLE.
Are someone known something about this issue?
regards
Chris

@ Sunny Pahuja:
We checked sapmnt.
Sapmnt is common on CI and DI. It was never mounted on DB. But DB runs perfectly until this issue.
@ Ankit Gupta
We checked the configuration of listener.
It is the same like the listener configuration of our ERP system with CI, DI and DB on separate Servers, too.
@ Rajesh Narkhede
From DB Server
|> tnsping BW2
TNS Ping Utility for IBM/AIX RISC System/6000: Version 10.2.0.2.0 - Production on 06-MAY-2010 07:40:56
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/oracle/BW2/102_64/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP)
(HOST = bw2dba) (PORT = 1527))) (CONNECT_DATA = (SID = BW2) (GLOBAL_NAME = BW2.WORLD)))
OK (100 msec)
On CI and DI we don't have tnsping.
Just copy it don't work.
|> tnsping BW2
TNS Ping Utility for IBM/AIX RISC System/6000: Version 10.2.0.2.0 - Production on 06-MAY-2010 08:39:17
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Message 3511 not found; No message file for product=network, facility=TNS
Message 3512 not found; No message file for product=network, facility=TNS
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP)
(HOST = bw2dba) (PORT = 1527))) (CONNECT_DATA = (SID = BW2) (GLOBAL_NAME = BW2.WORLD)))
Message 3509 not found; No message file for product=network, facility=TNS
How to get it on the CI and DI. In the SAR files at SAP it is not included. I can't found something in the Web.

Is my HD Dead? Reformat Disk Utility Error: secure disk erase failed with the error could not open disk.

Hi,
Fed up with seeing the spinning beach ball I decided to reformat my MacBook Pro...
After backing up everything on an external hard drive I put in the OSX install DVD, restarted the machine and held down 'C'.
I followed the install prcedure, clicking next a few times etc...
I then went into Utilities > Disk Utility. I chose 7-Pass to erase the Macintosh HD and set it off erasing.
I checked the process an hour in and message on screen read:
Secure disk erase failed with the error:
could not open disk
The internal hard drive no longer exists in the disk utility so I cant retry erasing it.
The only thing that appears in disk utility is the OSX install DVD.
I can't even shut down the mac as everything under the apple tab is greyed out!
I'm guessing this means my hard drive is broken right?
If anyone has any other ideas of what to try I'd really appreciate that.
How do I turn the machine off?
If my hard drive is gone then should I consider getting an SSD drive?
Any recommendations for such a drive would be great.
Hope you can help!

Did you partition the drive?
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

Urgent:IMP-00017: following statement failed with ORACLE error 3113

OS:HP_UX 11i
Oracle 9.2.0.3.0
when import tablespace metadata,
comand is "imp \'sys/sysadmin AS sysdba\' TRANSPORT_TABLESPACE=y DATAFILES='/oradata/data2/
B.dbf' TABLESPACES=A FILE=A.dmp IGNORE=Y LOG=./log/import.log"
the error occurs as followed:
Export file created by EXPORT:V09.02.00 via conventional path
About to import transportable tablespace(s) metadata...
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
. importing SYS's objects into SYS
IMP-00017: following statement failed with ORACLE error 3113:
"BEGIN sys.dbms_plugts.beginImport ('9.2.0.3.0',31,'2000',NULL,'NULL',3626"
"7,35051,1); END;"
IMP-00003: ORACLE error 3113 encountered
ORA-03113: end-of-file on communication channel
IMP-00000: Import terminated unsuccessfully
export is in same enviorment, the successful informantion below:
exp \'sys/sysadmin AS sysdba\' TRANSPORT_TABLESPACE=y TABLESPACES=A FILE=A.dmp
LOG=./log/export.log
log file:
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8ISO8859P1 character set (possible charset conversion)
Note: table data (rows) will not be exported
About to export transportable tablespace metadata...
For tablespace A ...
. exporting cluster definitions
. exporting table definitions
. . exporting table A
. exporting referential integrity constraints
. exporting triggers
. end transportable tablespace metadata export
Export terminated successfully without warnings.

I do it,but the same error message.
export message:
Connected to: Oracle9i Enterprise Edition Release 9.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.3.0 - Production
Export done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
Note: table data (rows) will not be exported
About to export transportable tablespace metadata...
For tablespace A ...
. exporting cluster definitions
. exporting table definitions
. . exporting table A
. exporting referential integrity constraints
. exporting triggers
. end transportable tablespace metadata export
Export terminated successfully without warnings.
Import Message:
Export file created by EXPORT:V09.02.00 via conventional path
About to import transportable tablespace(s) metadata...
import done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
. importing SYS's objects into SYS
IMP-00017: following statement failed with ORACLE error 3113:
"BEGIN sys.dbms_plugts.beginImport ('9.2.0.3.0',31,'2000',NULL,'NULL',3627"
"7,36451,1); END;"
IMP-00003: ORACLE error 3113 encountered
ORA-03113: end-of-file on communication channel
IMP-00000: Import terminated unsuccessfully

CONNECT failed with sql error '1017'

Hello,
nus650pa:dv8adm 23% more trans.log
4 ETW000 R3trans version 6.05 (release 46D - 12.07.06 - 16:40:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 date&time   : 14.08.2014 - 16:58:18
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [developertra,00000] Thu Aug 14 16:58:19 2014                          170924 0.170924
4 ETW000 [developertra,00000] db_con_init called                                  1225 0.172149
4 ETW000 [developertra,00000] create_con (con_name=R/3)                          22426 0.194575
4 ETW000 [developertra,00000] Loading DB library '/usr/sap/DV8/SYS/exe/run/dboraslib.so' ...
4 ETW000                                                                             136 0.194711
4 ETW000 [developertra,00000] load shared library (/usr/sap/DV8/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000                                                                          369207 0.563918
4 ETW000 [developertra,00000] Library '/usr/sap/DV8/SYS/exe/run/dboraslib.so' loaded
4 ETW000                                                                             174 0.564092
4 ETW000 [developertra,00000] function DbSlExpFuns loaded from library /usr/sap/DV8/SYS/exe/run/dboraslib.so
4 ETW000                                                                             694 0.564786
4 ETW000 [developertra,00000] Version of library '/usr/sap/DV8/SYS/exe/run/dboraslib.so' is "46D.00", patchlevel (0.2186)
4 ETW000                                                                           15725 0.580511
4 ETW000 [developertra,00000] function dsql_db_init loaded from library /usr/sap/DV8/SYS/exe/run/dboraslib.so
4 ETW000                                                                              60 0.580571
4 ETW000 [developertra,00000] function dbdd_exp_funs loaded from library /usr/sap/DV8/SYS/exe/run/dboraslib.so
4 ETW000                                                                             121 0.580692
4 ETW000 [developertra,00000] New connection 0 created                              96 0.580788
4 ETW000 [developertra,00000] db_con_connect (con_name=R/3)                      14511 0.595299
4 ETW000 [developertra,00000] find_con found the following connection for reuse:
4 ETW000                                                                              53 0.595352
4 ETW000 [developertra,00000] Got ORACLE_HOME=/oracle/DV8/920_64 from environment
4 ETW000                                                                           73038 0.668390
4 ETW000 [developertra,00000] -->oci_initialize                                    589 0.668979
4 ETW000 [developertra,00000] Got ORACLE_SID=DV8 from environment                   56 0.669035
4 ETW000 [developertra,00000] Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
4 ETW000                                                                              52 0.669087
4 ETW000 [developertra,00000] Logon as OPS$-user to get SAPR3's password            33 0.669120
4 ETW000 [developertra,00000] Connecting as /@DV8 on connection 0 ...               91 0.669211
4 ETW000 [developertra,00000] -->oci_logon(con_hdl=0, user='', dbname='DV8')       999 0.670210
4 ETW000 [developertra,00000] Thu Aug 14 16:58:20 2014                          245280 0.915490
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'olog' failed: rc = 1017       263 0.915753
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000                                                                             858 0.916611
4 ETW000 [developertra,00000] Try to connect with default password                  38 0.916649
4 ETW000 [developertra,00000] Connecting as SAPR3/<pwd>@DV8 on connection 0 ...
4 ETW000                                                                              53 0.916702
4 ETW000 [developertra,00000] -->oci_logon(con_hdl=0, user='SAPR3', dbname='DV8')
4 ETW000                                                                              46 0.916748
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'olog' failed: rc = 1017    118256 1.035004
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000                                                                              86 1.035090
4 ETW000 [developertra,00000] Got ORACLE_SID=DV8 from environment                  716 1.035806
4 ETW000 [developertra,00000] Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
4 ETW000                                                                              55 1.035861
4 ETW000 [developertra,00000] Logon as OPS$-user to get SAPR3's password            33 1.035894
4 ETW000 [developertra,00000] Connecting as /@DV8 on connection 0 ...               29 1.035923
4 ETW000 [developertra,00000] -->oci_logon(con_hdl=0, user='', dbname='DV8')        28 1.035951
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'olog' failed: rc = 1017    126719 1.162670
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000                                                                             165 1.162835
4 ETW000 [developertra,00000] Try to connect with default password                  36 1.162871
4 ETW000 [developertra,00000] Connecting as SAPR3/<pwd>@DV8 on connection 0 ...
4 ETW000                                                                              47 1.162918
4 ETW000 [developertra,00000] -->oci_logon(con_hdl=0, user='SAPR3', dbname='DV8')
4 ETW000                                                                              42 1.162960
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'olog' failed: rc = 1017    123784 1.286744
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000                                                                              70 1.286814
4 ETW000 [dblink      ,00627] ***LOG BY2=>sql error 1017   performing CON         1140 1.287954
4 ETW000 [dblink      ,00627] ***LOG BY0=>                                          42 1.287996
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'DV8'"
Please help.
Thanks
Priyanshu Srivastava

Hi
Could you check this SAP Notes Error message
"ORA-01017: invalid username/password; logon denied
BR310E Connect to database instance DV8 failed"
1576837 - ORA-01017: invalid username/password;
1860519 - SAP fails to connect to the database
BR
SS

Screen Sharing suddenly fails with "Communication Error" in console log. File sharing works fine. Thoughts?

Similar Messages

Maybe you are looking for