Screen Sharing with 10.4.11

I have been trying to share a 10.4.11 screen from a Snow leopard machine and have not been able to get it to work. Is it possible? If so is there DETAILED instruction of how do do it anywhere?
When looking at the other machine in Finder I see the sharing button but it won't connect for sharing (but can for file transfer)
My situation... I just got a 27" iMac running 10.6.2, but I still need to run some Classic Apps. I previously used a PowerMac G5 Running 10.4.11 which I passed onto another family member that still let me used Classic (which is why I did not upgrade it to 10.5)
I tried to get SheepShaver up on Running on my new iMac but only have a 9.1 Disk.
I have an older 800 MHz with 10.4.11 which can run classic.
Originally I had hoped to connect that to the video of the 27" iMac... But there are no adaptors and i read if and when they do exist they will be very expensive (this I did not know before I bought the imac)
Anyway one solution (outside of another monitor - not an option financially or space wise now) would be for me to be able to do screen sharing and control the PowerMac from the imac. That would let me use my classic Apps. I was thinking of connecting the machines via firewire 400 which I THINK should give reasonable performance (my router is only 100 Mbit)
Thanks
- Karen

you need to enable screen sharing access on the 10.4 machine and possibly disable the firewall.
you should ask how to do that in the tiger forum, not here. once screen sharing is enabled you should be able to connect to the 10.4 machine from the snow leopard one simply by clicking on "share screen". no configuration at all is required on the 10.6 system. if anything needs to be done it will be on the 10.4 one. as i haven't used tiger in a couple of years can't give any instructions on that. this page seems to explain it
http://forums.macnn.com/90/mac-os-x/358759/screen-sharing-10-4-systems-leopard/
but as I said, ask on the tiger forum for best results.

Similar Messages

  • Remove little window "my computer" screen when screen sharing with iChat?

    Anyone know if it is possible to remove or minimize the little window when screen sharing with iChat? if you try to drag it off the screen, it just pops back. It does not seem possible to close it without getting booted out of the screen sharing.

    As the "little Screen" is either your Desktop or the other Desktop depending which you have as the current one you are working in it seems silly to have no access to changing back and forth.
    But as you say or rather imply it does sometimes occupy the space you want someone at the other end to see and you can not access that part of the screen or if the other end is trying to show you something it can be hidden my your own desktop.
    AT present Not Even Chax does what you want.
    7:31 PM Monday; March 10, 2008

  • Lion Screen Sharing with Full Screen apps on Remote Lion

    Has anyone figured out how to EASILY work with multiple desktops and full screen apps on the remote mac when Screen Sharing with one Lion mac from another?  All of the standard methods of switching between desktops and full screen apps (swipe, cmd + <arrow>, etc) all take place on the the local Mac, and not the remote one. 
    The only real effective methods I have found so far are using the dock (not elegant with full screen apps), and removing an app from full screen.  Either way, these methods are clumsy and do not compliment the new features that Lion provides. 

    You're not going to believe this.
    Problem was on my buddy's end.  The  slash key "/" was stuck down on her keyboard.
    Sometimes the solution is so far out of normal troubleshooting, you're luck if you ever find it...
    Nothing to see here, move along...

  • Problem Screen Sharing with my grandma.

    I am having trouble screen sharing with my grandmother's computer. I have a brand new Mac Book Pro 15-inch, 2.4 GHz Intel Core 2 Duo processor, 2 GB of memory with Mac OS X 10.5.1 . I bought my computer and my grandmother's back in October right after Leopard was released. She has a brand new iMac 20-inch, 2.4 GHz Intel Core 2 Duo processor, 2 GB of memory with Mac OS X Leopard 10.5 .
    We have been talking over video/audio chats using AIM for quite some time now with no problems other then an occasional internet problem (audio or video skips for a second or audio/video quality is bad for a few seconds). She is used to Windows so I have had to show/explain the basics of a Mac and every time she has a problem with something I try to help her by walking her through it, but it would be really nice if I could just do it myself through Screen Sharing. We have tried to share her screen but it comes up with and error message every time.
    I have looked at the things that people are saying about how to fix your problem with screen sharing and I have tried most of them but they don't seem to be working. Maybe I am just missing something.
    Please help me get this to work.

    As you say there is nothing Specific in the Info about Fair Usage.
    However the things you can not do are not so specific and could be stretched to cover what you want to do.
    However it would depend on how actively they searched the data traffic for the things that might be interpreted as P2P file sharing and the from it takes.
    As you can Video to some and Not Screen Share to others it sounds more like a NAT issue with (or possibly ports for Sharing Screens at your Grandma's) between you and your Buddy. ANd I think it is unlikely to be your ISP.
    The Screen sharing part of iChat does not use the listed A/V or login ports.
    It is supposed to use the Apple Remote Desktop ports that it is based on. However I have used Little Snitch which has pointed to many other Ports almost at random.
    Try changing the Login port at both your End and your Grandma's
    (iChat > Preferences > Accounts > Server settings tab - change the port from 5190 to 443) You can only do this whilst logged out of the AIM servers.
    5:25 PM Tuesday; February 12, 2008

  • ICHAT Screen sharing with "Share My Screen"

    I am able to screen share when I "Ask to share" my father's screen, and he is able to "Ask to share" my screen. Both work successfully. However, when either of us select "Share My Screen" with the other, the audio kicks in but the window that says "Starting Screen Sharing with" username just keeps spinning, never switching over to sharing the screen.
    I have a MacBook Pro running 10.5.2. He has a MacBook 1gb 2ghz Intel Core 2 Duo running 10.5.2.

    I am talking about this page/pane on the Airport Admin Utility info
    Where it says "Share AN IP" at the bottom, in the drop down
    This is where it does DHCP to your LAN (And therefore computers)
    If you do mean this pane then we need to know what IP is shown where the 75 is shown.
    Is it one starting 192.168.x.xxx (or 10.something or 172.something) ?
    If it does list an IP in one of those Groups and the SHare an IP is ON then you have two DHCP servers.
    As for accessing the DSL modem it is normally a question of using a Web browser
    You need the IP from the place where the 75 is showing as the "Router" IP This would be the one to use in a web browser if it is one of those groups.
    After that use this page http://portforward.com/routers.htm
    If you device shows then click on it.
    In the Next page click on iChat.
    The Page that comes up should be used for reference only.
    It should contain the default IP and the User ID and Password if it uses one.
    Once you get here check all the Settings and look to see what is active in UPnP if you have it, Port Forwarding, Port Triggering and DMZ.
    Lets us know what you find.
    Telling us the make and model will provide a bit of a check of other issues.
    11:06 AM Sunday; March 2, 2008

  • Auto Accept with Screen Sharing with Yosemite Messages App

    I take care of many of my family and friend's Macs and I'm really excited that screen sharing with 10.10 Yosemite through iMessage. I'm wondering if anyone know of a way to enrol their Macs into auto-accepting me to control the screen without the need for them to accept it. I know there was a way to do this back in the days of iChat.

    Hi,
    In Any Finder window use the Go Menu whilst holding down the ALT key.
    Select the Library that appears and the navigate to Application Scripts/com.apple.iChat
    Double click the Auto Accept item to open in in the Script Editor (formerly AppleScript Editor)
    You will note the Text section at the top is commented out by being between (* and then the text and then *) the stars and parentheses.
    Later a single line is also commented out with a # symbol
    In iChat the section for Auto Accepting Screen Sharing used to be commentated out  (originally it was not even there)
    You might decide to comment out the other lines leaving just the bits you want.  (or Copy the AppleScript and alter the copy).
    Then you can go to Messages > Preferences > General Section and select the AppleScript as the Messages Received item.
    NOTE
    I have had issue myself with the AppleScripts as they stand  in Yosemite.
    I have tried several of those that are Included and some that I have collected from iChat and all return and error messages about timing out at present.
    Others have reported the same in various Threads here at the Apple Support Communities.
    At present there does not seem to be a work around.
    9:07 pm      Tuesday; February 24, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Remote desktop and screen sharing with RMI

    Iam developing an application for screen sharing and remote desktop
    the problem is a performance problem
    in the screen sharing application server screen is captured and the image is sent to all connected clients through rmi connection
    I used JPEGImageEncoder to compress the image and convert it to array of bytes
    then zipped the resulted array using deflater.
    the result is sent through rmi connection
    the performance is so poor
    i tried JMF but the performance is worse
    i am thinking of a way to send the server screen only if it is changed but i don't know how
    anyone could help me to enhance it with acceptable quality for the image
    thanks

    As you said, you need to only send the changes over the line.
    Java can not tell you what has changed, so you need to either write some JNI, or do a check on the current image, with the last image. (this would eat quite a bit of CPU time on the server).
    It might be worth looking at the source for VNC, and other simler products.
    The simpliest solution would be to split the image into blocks of x by y pixels, then do a pixel-by-pixel check on that block, and only send the block if it has changed.
    Next thing to think about is scrapping RMI, and using raw sockets. RMI has a fair sized overhead.
    Zipping a JPEG is unlikely to have any effect. A JPEG is already compressed.
    You might want to look at a lossless compression format, like PNG, as the JPEG will have articles. This might be acceptable. If so, changing the compression ratio of the JPEG might be an option.
    Finally, the bottle neck might be the call to Robot.createScreenCapture. This is not the fastest method.

  • Screen sharing with dual monitors

    I have a user on the network with a 13" MBP w/ 10.6.8 with an external display (23" Dell LED) set up to its right.  The user typically leaves Mail open on the 13" display and runs her other apps on the external display.  I'm running a 17" MBP w/ 10.8.1 with a 27" LED Cinema Display set up to its right.
    When I try to share her screen, things go strange.  It used to show the two displays correctly in a large window on my LED, but at some point when I was running Lion, and for no apparent reason (I didn't notice it immediately after an update, for example), the whole thing seemed to shift to the right by one screen width.  Honestly, I can't think of a way to describe it, but I can simultaneously give you a screen shot and show off my amazing 'Shop skrillz.  Behold:
    Please forgive the atrocity that is this pixel homocide.  If you tell me what's wrong with the screen sharing and how to fix it, I promise never to destroy harmless pixels again.  Anytime soon, anyway.

    Hi,
    They could of course set the screen/Monitor to Mirror for a while as well
    Also in the arrangement part of the Displays they could set it to have on on top of the other which might display slightly better if your Screen is 4 X 4 ratio
    8:20 PM Saturday; December 5, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Screen Sharing with Back to my Mac

    This little detail is  different under 10.7 than 10.6, it has taken me some hours of frustration to sort out by trial and error. I haven't seen it documented anywhere.
    When a Back to my Mac user connects  to another Mac to share the screen, if the userid used for the sharing connection is the same as the active user on the shared system, then sharing starts immediately upon successful authentication. If the userid used for the sharing connection is different than the active user, then the active user must give permission for screen sharing to start.
    One of the consequences is that a sharing only user ID can only be used to start unattended access if the unattended machine is at the login screen.
    This is in contrast to 10.6, where any userid can start  screen sharing without permission of the active user.

    Editing original post:
    I'm trying to access my home Mac Mini from outside the home using a Macbook. I'm trying to use Leopard's screen sharing using .Mac and no luck, I can't see my Mac Mini outside my network.
    At home, I've got the Mac Mini:
    (1) running the latest Leopard
    (2) connected to .Mac with Back to My Mac running
    (3) File Sharing, Web Sharing, Remote Login, and Remote Management all on
    (4) Time Capsule with the latest f/w updates running PPPoE to a DSL modem
    At work, I've got the Macbook running:
    (1) running the latest Leopard
    (2) connected to .Mac with Back to My Mac running
    (3) File Sharing, Web Sharing, Remote Login, and Remote Management all on
    When I'm at home, I can screen share between Macs no problem. However, at work, I can't see my home Mac Mini. I know that it is possible to get through my company firewall because I can get my Slingbox to work at the office.
    Suggestions where to start? I'm kinda stuck.

  • Can't use Skype Screen Sharing with Windows 7

    Skype Screen Sharing feature is not displayed under + during a call. So I cannot use this function. Please help. Thanks, Norbert

    Using Windows Registry Editor (regedit) open this key: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Skype\Phone Do you see any settings applied for this key? Do the same with this registry key: HKEY_CURRENT_USER\SOFTWARE\Policies\Skype\Phone http://www.techsupportalert.com/content/learn-how-​​use-windows-registry-editor-regedit-one-easy-less​...

  • IChat screen sharing with dual monitors on client

    Hello,
    I'm trying to help a buddy out via screen sharing. The problem is he has two monitors. When I connect, they both appear as one display on my monitor resulting in a very small & hard to view image.
    Is there a way to only show one monitor at a time? I know this works with regular screen sharing when Macs are on the same LAN, but I can't figure out how to do it via iChat.
    thanks,
    Shaun

    Hi,
    They could of course set the screen/Monitor to Mirror for a while as well
    Also in the arrangement part of the Displays they could set it to have on on top of the other which might display slightly better if your Screen is 4 X 4 ratio
    8:20 PM Saturday; December 5, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • IChat Screen Sharing with Multiple Monitors

    I love the new Screen Sharing feature included in iChat 4 as part of Leopard. It is an incredible diagnostic tool that will make it much easier for Mac users to help support each other.
    The problem I've run into is that our "standard" config at work is a 15" MacBook Pro with a 23" external display. When doing Screen Sharing from this system, both displays are shrunk to about half their size so they can fit on the main screen of the remote computer. In many cases this works fine, but the images and text can be pretty small on the viewing computer.
    Is there any way to control the scaling on the viewing computer? Is there any way on the computer that is being shared to say, only share this monitor?
    Just trying to find a way to make the image easier to see on the remote computer.
    Steve

    Try to run all displays in the same resolution (the settings of the less advanced, smaller display, not the other way around). Additional displays require additional processing, close other applications. Unplug the 23" for now, try it when you've got everything else running. Restart connected computers after you've changed settings on any detectable display. Make sure the bandwidth is sufficient for screen sharing on both ends. (I would use Spaces on the remote computer to create speedy access to applications.) When this works, try to connect the external display.

  • Screen sharing with lid closed

    Hi,
    I'm experiencing weird behaviour when I try to share the screen of my MBPwRD with its lid clsoed.  The MBPwRD shows up in the Finder sidebar as a device that I can connect to, and I can initiate screen sharing from another Mac on my network.  However, after a couple of seconds the screen share window goes black.  It then seems to try to reconnect but fails.  If I close the screen sharing window and return to the Finder, the MBPwRD no longer shows in the sidebar.
    Anyone else experiencing this?
    LM

    You can, but you need additional hardware to do so:
    http://www.matrox.com/graphics/en/gxm/products/mac/home.php
    Hope this helps...

  • VNC Screen Sharing with a running Mac without a confirmation

    Thank you for any suggestions!
    I need to regularly check with another Mac that has a static IP and is always running. Both machines run Snow Leopard and I use the command Connect To Server in Finder to connect to VNC://….
    So far I managed to ask for confirmation and have someone in the location confirm to establish Screen Sharing, but I have not been able to do the same without asking for permission first.
    I don’t want to use the first option By asking for permission
    but the second option As a registered user.
    The error message is:
    Authentication failed to “server”
    Please verify you have entered the correct name and password.
    Does the user who wants to establish the connection have to be a different one from the one who is currently logged in? I have tried both, the same user and a different registered user on the machine.
    What else could I do differently?
    One is a Mac Pro and one is a Mac Mini both run 10.6.8

    I have been doing this for years...
    Do you have a real world static IP or is it behind a router.  If behind a router:
    1.  look into No-IP for its free (manually renewable monthly) or paid services to convert it to a real IP and domain-style name; and
    2.  open port 5900 on your router to the mac's local static IP that you want to control.
    Go into System Preferences:Sharing and click on Computer Settings... and uncheck that anyone may ask for permission.
    I then just use the GO menu in Finder on the outside Mac as in this example:
    vnc://noriker.noipnet.net (or suitable substitute that No-IP will provide for you) and log in with my account name and password for that particular Mac.
    Does that work for you?

  • Screen sharing with remote Mac

    hi,
    my mom got herself a used MacBook but she is new to computing. she keeps on calling me about troubleshooting issues. helping her over the phone is cumbersome.
    how would i go about using screen sharing to take control of her Mac from home ? what needs to be installed on my Mac and hers ? what information is required on my Mac to access hers over the WWW ? is there a step-by-step instruction/manual out there ? do i need VNC or ARD ?
    sorry if this sounds dumb - new to this part of networking ...

    Please do not hijack someone else's thread, especially one that has been answered. You can not give points to helpful contributes unless you start your own thread.
    Am I wrong in searching help and seeing you have to have Back to My Mac subscribed to to make this happen OUTSIDE of iChat,
    No, it is possible to make connections without iChat and without a MobileMe subscription. It is just harder.
    as in by pulling an alias out of CoreServices folder in the primary System folder and putting it in the dock?
    You do not need to create a Screen Sharing alias, you can use Finder -> Go -> Connect to Server -> vnc://address.of.vnc.server. You can create Safari bookmarks with vnc://adddress.of.vnc.server and use them. You can drag those Safari URLs to a folder, and create double-clickable files that will also launch the Screen Sharing utility.
    Otherwise, outside of using iChat it seems 10.5.8 and up have lots of built in ability to use the built in version of VNC such as ScreenSharing .app and whatnot, but seems to me most all of the remote or sharing key items require a .Mac account or be used BEHIND a LAN, not through a WAN...
    Am I wrong in this?
    Well, you can use TeamViewer.com, LogMeIn.com, GoToMyPC.com, and maybe a few other services. These would be easy. They all have the same thing in common with iChat and MobileMe. There is a server that both systems talk to, that handles exchanging IP addresses, and since both system make the out-bound connection, this solves the "How do I get though the home router firewall protections" question.
    If you want to roll your own, then you get to figure out how to have your home router port forward the Screen Sharing port 5900 from the internet side to your Mac, and the file sharing port 548 (if you want file sharing over the internet).
    Now you need to get the IP address assigned to your router, and give that to the person attempting to make a Screen Sharing connection. WhatIsMyIP.com is one such service. Or you can get a free dynamic DNS name from a serivce such as No-IP.com or DynDNS.org, and then download one of their dynamic DNS name updating utilities, which you install on your Mac and run in the background so your dynamic DNS names stays updated whenever your ISP changes your router's IP address.
    Now from the Mac making the connection, you use Finder -> Go -> Connect to Server -> vnc://address.of.your.router, or for file sharing afp://address.of.your.router.
    NOTE: Doing this exposes known ports to malicious "Bots" that will attempt to break into your Mac, so make sure you use a very secure password. Yet another feature for the above services, as you do not open in-bound ports.
    Also NOTE: These roll your own connections may not be encrypted. I think there is an option in Screen Sharing that will make the Mac to Mac Screen Sharing connections encrypted, but that does not apply if you are talking to a Windows or Unix/Linux VNC server. I do not think the file sharing connections are encrypted. The above services do provide end-to-end encryption for screen sharing and file transfers.
    If you want end-to-end encryption in a roll your own environment, you can use ssh tunnels, however, that is another layer of complexity. If you enjoy that sort of thing (and some of use do), that is another avenue you can pursue.
    If you have any further questions about screen or file sharing please start a new thread where you can assign points for Helpful answers and Solutions. It isn't much, but the people that give you good answers deserve something for their efforts.

Maybe you are looking for