Screen Sharing works for alien hosts but not for LAN hosts
Hello!
I am having a really strange problem in a customer network. The network is a local private network with one MacOS Server 10.6.8 and around 12 iMacs running MacOS 10.6.8. The server is running headless in cellar so the user maintain the backup via screen sharing from an iMac to the server.
Since a few weeks they can not login to the server via screen sharing from any local host BUT I can login from my MBP (alien) via ARD or Screen Sharing without any problem. Even hosts connected to the network via VPN can connect to the server via screen sharing.
In short:
Every local host gets a message that login is not possible and my MBP and VPN-hosts get connected without any problems with the same credentials.
At the local clients I get this message in system.log:
Oct 28 09:33:41 verwaltung1 LKDCHelper[228]: Starting (uid=501)
Oct 28 09:33:48 verwaltung1 com.apple.launchd.peruser.501[166] (com.apple.Kerberos.renew.plist): Throttling respawn: Will start in 530 seconds
Oct 28 09:34:17 verwaltung1 /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer[195]: CGSKeyTranslateInitialize: KLGetCurrentKeyboardLayout or KLGetKeyboardLayoutProperty is not available, fall back to USA keymap
and at the server I get:
Oct 28 09:33:48 solserv AppleVNCServer[11503]: no such user: adminloc@LKDC:SHA1.DE03ABCC86F74D11AD139E44388D6B94155B4D9E: 2
When I connect from VPN or my MBP I get no messages in system.log.
I tried to kickstart ARD at the server but it does not change anything, I bound the clients to OpenDir of the server with no effect also.
I do not have any idea what is happening here. Every help is welcome,
Christop
Hello MrHoffmann!
changeip says "The names match. There is nothing to change."
To give more infos, the server and all the clients are connected to the same network switch, all belong to 192.168.183/24 and when I use my MBP, it is connected via WLAN and gets an IP-address from this server with an IP from this range. my MBP is in the same broadcast domain.
VPN clients connect via PPTP to the gateway (192.168.183.1) and get IP addresses assigned from 192.168.183.48-52.
There is no routing between the clients and the server.
There is no other problem - every client reaches the server for file serivces (AFP/SMB), smtp, imap, DHCP and DNS.
BTW. screen sharing from the clients worked without a problem when I first setup the network about 1 year ago, but since a few weeks no client that belongs to this network can use screen sharing except for my MBP when I am at customer site.
History:
The new SLS is a replacement for an old Windows 2000 Server. Both servers ran in parallel for some time but within different IP-networks (all Macs at 192.168.183/24 - all Windows at 192.168.2/24) the gateway routed between both networks. But now it is time to switch off every windows computer because every service now runs at the SLS. AFAIK the windows 2000 Server is the last Windows machine in the network. We switched off DHCP at the windows server and switched on DHCP at the SLS a few weeks ago. Hm .... maybe there is something wrong? But the clients have fixed ip-addresses.
Still wondering what is going on here, bye,
Christoph
Similar Messages
-
Airplay works for one user but not for another on the same machine
I have the problem where airplay works for one user but not for another and both users are on the same machine. For the user where it does not work, everything appears normal, it's just that there is no sound being transmitted. I have tried restarting the Airport express, restarting iTunes, repairing disk permissions. Any ideas about what can be done to resolve this?
my /etc/group:
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:
disk::6:root
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,hans,ibm,gast
ftp::11:
mail::12:
uucp:x:14:
log::19:root
locate:x:21:
smmsp::25:
http::33:
games::50:
network:x:90:
video:x:91:
audio::92:ibm,gast
optical::93:hal
floppy:x:94:hal
storage:x:95:hal
scanner:x:96:
power:x:98:
nobody::99:
users::100:gast
dbus:x:81:
hans:x:1001:
vboxusers:x:108:hans
policykit:x:1002:
hal:x:82:
kvm:x:78:
nx:x:85:nx
avahi:x:84:
camera:x:97:
gdm:x:1003:
gast:x:1004: -
My NBA League Pass login cannot be authenticated -- I am in the United States and the same league pass name and password are working for my iPad, but not for my apple tv.
I have this same issue and am becoming quite upset. NBA has absolutely no contact information to call and resolve this issue. I just spent $139.99 and cannot connect to Apple TV, while the same login works just fine on my iMac and iPad. When I signed up, the information provided indicated that I could view live games on Apple TV. What the ****?
-
Classic - text ringtones work for one contact but not for others
Just got the new Blackberry classic. I'm having trouble with the ringtones for the text messages. The custom ringtone works for one contact but not for the others. I have taken the same custom ringtone that works for contact A and used it for contact B but it only works for A. B sounds the default ringtone from the default profile instead of the custom ringtone.
I have deleted all contacts and done a re-sync thinking something was corrupt. That didn't work.
None of the contacts have a link.
I have changed the notification profile and it still doesn't work.
I have deleted a contact and recreated it manually. It still doesn't work.
I finally deleted my dad's contact and from the phone app created a new contact. I set a custom ringtone for him and it worked. I of course had to recreate all his other information manually. Please tell me there is some other way to fix this than recreating manually all 147 contacts in my contact list.
I read that if the phone number has the hypen or space it won't work, but my dad's contact info that I created from the phone app has the hypen and it rings with the custom ringtone. Also contact A has no hypen in the phone number and it rings the custom ringtone. So that didn't seem to matter.
I have spent hours on Google and see that lots of people have had this problem (but not everyone) but have not yet found a solution.
Surely someone has found a fix for this issue.Make sure that the contact has "Mobile" as the field for her number and not "iPhone".
Note that the iPad cannot send SMS messages. -
I buy for mac app but not for the iPad, so how do I reinstall a program that has already purchased? I need help because I bought the imovie'11 but when he opened it only brought 8 movie trailer templates instead of the 15 it says on the program. How do I solve this problem? Once paid for a program incomplete. I also liked that the AppStore itself had a button to reinstall programs already bought, because it is very hard to understand how to do this in the store, only option is to install and hide purchase, and how do I reinstall, attention'm talking about reinstalling a computer mac, not an ipad or iphone.
Thank you.Prodesigntools.com , go ahead and download the software from there and use your serial number to serialize it.
-
I am learning how to use AUSampler in GarageBand. I am using a MIDI controller (Alesis Q88) with a foot pedal for the sustain.
The sustain works with the default sound in AUSampler (Sine 440), but not for a sound that I imported. Also, my imported sound plays longer the lower the keys played, and the higher up the keys the faster it plays. Either way, it doesn't allow sustain, but yet the default sound does.
I know where the Controller / Sustain Pedal area is within the Piano Roll but that doesn't fix my dilemma.
I presume my problem is related to the viola sound I imported (wav format), or the way I need to set something up; I hope the latter.
Any clues?
Many thanks in advance.HI Bob,
You can test your settings by clicking the big "Test My DNS" button at <https://www.dns-oarc.net/oarc/services/dnsentropy>. If you see "Poor" on any of the tests, don't use that domain name server! Remove it from Apple Menu => System Preferences =>Network =>DNS Servers or similar location in your router if you've got a 'home network'. If all you have is "poor" DNS servers in your list, call your ISP and insist that they give you the address of a name server which is protected against the recently exposed DNS cache-poisoning threat.
Also, open System Preferences/Network. Click the DNS tab. Add these numbers in the DNS Servers box.
208.67.222.222
208.67.220.220
See if that helps.
Carolyn -
HELP!! WRT54G2 works for one computer, but not for the other
I have a WRT54G2 and it is connected to 2 computers. The internet works in one computer, but not on the other. The tech support said i needed to configure it or firmware or something like that. But my product is out of warranty and I really need the internet on the other computer as well. Please Help!!!
As your one computer is working fine then there is no problem with the router so far...
The computer which is not working...check the IP Address on that...
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online... -
G500 indicator light works for caps lock, but not for num lock
I have G500 laptop running windows 8.1 64 bit. I have noticed that there is no indicator light for when num lock is on. The light on the front of the computer under the touchpad comes on when caps lock is active, but not for num lock. Is there any indicator for num lock on this computer?
Hi Kimikat730,
Welcome to Lenovo Community!
I’m sorry to inform you that there is no other indicator in G500 Laptop for Num-Lock key.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Problems with Home Sharing - works with some users but not all
Hi all,
On our Mac we have 3 different user accounts. Among the three, home sharing seems to work for two of them, but not three. For example, if I'm logged into User A's account, I'm able to access the library for users B & C. However, B & C are able to see user A's library, but items do not play or transfer. B & C can use each other's shared libraries without a problem.
Previously, all three users could use the other's libraries. I've done the obvious: restarted the computer, made sure sharing was turned on on all 3 accounts and synced the Apple ID and password on all three iTunes so that they're runing on the same Apple ID account.
The error I get when trying to transfer songs from A to either B or C is: "There was a problem downloading "[song name]". The URL "" could not be found on the server."
We're using iTunes 9.0.2.
Thanks all in advanceclick here to learn "how to share music between different accounts on a single computer" and this read about iTunes 9: Understanding Home Sharing
any help ?
edited by the Jolly Green Giant (where Green stands for environmentally friendly) -
Home sharing works with one account but not another?
My family has an apple tv, we've been having problems setting up the home sharing and tried everything. We eventually decided to try my brother's apple id instead of my mother's and it worked. So my question is; why does home sharing not work with one id but works with the other? any suggestions to get it to work with my mother's id?
Try resetting the Apple TV. enter your mother's ID again. Then remove her ID on iTunes and re-add it. Then see if it works this time.
-
SMTP relay works for external recipient but not for internal recipient
Relay allowing external recipients but not internal recipients. Running Exchange 2010.
Whats the error you gotten for the NDR
Blog: http://theinfraguys.com
Follow me at Facebook
The Infra Guys Facebook Page
Please remember to click Mark as Answer on the answer if it helps you in anyway -
Hi,
I'm looking for a solution to this issue. Console shows that mba wakes up for timemachine backups but when firing Find My Mac on iPhone or iMac, it does not succeed in locating my mba and it is listed as offline.
How to solve this?
Cheers
Krishttp://support.apple.com/kb/HT5394
This states that you need to do an smc reset for full powernap functionality. It could be effecting it if it was an older macbook air that you updated to mountain lion?
Ryan -
Printer Prints fine for Admin Account, but not for "Regular" User Account.
Printer works perfectly when signed on as Administrator, but not when we use non-admin login. I can see the printer - it says ready, but it won't print.. although job does not sit in printer queue.
I did a full driver install FROM the local account, using "Run as" - but it can't find the printer. I did a Full Driver Install from the Admin account, with no change to the non- admin account. Any help would be most appreciated.
Thanks .Hi @maggie-o,
I understand you can print when printing form an admin account, but otherwise can not. I would be happy to help you with this.
If you are running Norton Antivirus, go into the Control Panel and click on Printers & Faxes, then right click on the Printer and select Properties. In the Properties, click on the Advanced tab., and set it to Print Direct to Printer instead of using the Print Spooler. I think there is something in Norton that prevents the Limited Users account from accessing the Print Spooler.
If the issue persists, please take a look at the following articles: Security permissions for printing, & To set or remove permissions for a printer.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
Oracle 10g DB connecting for sys,system but not for other users
Hi,
I have oracle 10g in Windows XP. I am able to connect to database using sys/pwd@db as sysdba. All SYSDBA users able to connect DB.
When I try to connect using user, Its not throwing any error but not connecting. Just the cursor is blinking...
How to fix this issue.
Thanks in advance
-ManiHi,
I didnt see any error message in alert log. Its not logging any message while connecting DB using SYSDBA.
My DB is in NOARCHIVELOG mode.
Sill non DBA users are not able to login.
what could be the reason for this issue?
Any help....
Below is my alert log......
Dump file d:\oracle\product\10.1.0\admin\orcl10g\bdump\alert_orcl10g.log
Sat Apr 26 13:51:24 2008
ORACLE V10.1.0.2.0 - Production vsnsta=0
vsnsql=13 vsnxtr=3
Windows XP Version V5.1 Service Pack 2
CPU : 2 - type 586
Process Affinity: 0x00000000
Memory (A/P) : PH:270M/1014M, PG:852M/2441M, VA:1959M/2047M
Sat Apr 26 13:51:24 2008
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
KCCDEBUG_LEVEL = 0
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
Dynamic strands is set to TRUE
Running with 2 shared and 18 private strand(s). Zero-copy redo is FALSE
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 10.1.0.2.0.
System parameters with non-default values:
processes = 150
shared_pool_size = 83886080
large_pool_size = 8388608
java_pool_size = 50331648
resource_manager_plan = INTERNAL_QUIESCE
control_files = D:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL10G\CONTROL01.CTL, D:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL10G\CONTROL02.CTL, D:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL10G\CONTROL03.CTL
db_block_size = 8192
db_cache_size = 25165824
compatible = 10.1.0.2.0
db_file_multiblock_read_count= 16
db_recovery_file_dest = D:\oracle\product\10.1.0\flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=orcl10gXDB)
job_queue_processes = 10
background_dump_dest = D:\ORACLE\PRODUCT\10.1.0\ADMIN\ORCL10G\BDUMP
user_dump_dest = D:\ORACLE\PRODUCT\10.1.0\ADMIN\ORCL10G\UDUMP
core_dump_dest = D:\ORACLE\PRODUCT\10.1.0\ADMIN\ORCL10G\CDUMP
sort_area_size = 65536
db_name = orcl10g
open_cursors = 300
pga_aggregate_target = 25165824
PMON started with pid=2, OS id=1840
MMAN started with pid=3, OS id=4044
DBW0 started with pid=4, OS id=2324
LGWR started with pid=5, OS id=3460
CKPT started with pid=6, OS id=720
SMON started with pid=7, OS id=964
RECO started with pid=8, OS id=1780
Sat Apr 26 13:51:24 2008
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
CJQ0 started with pid=9, OS id=232
Sat Apr 26 13:51:24 2008
starting up 1 shared server(s) ...
Sat Apr 26 13:51:25 2008
alter database mount exclusive
Sat Apr 26 13:51:25 2008
Controlfile identified with block size 16384
Sat Apr 26 13:51:29 2008
Setting recovery target incarnation to 2
Sat Apr 26 13:51:29 2008
Successful mount of redo thread 1, with mount id 837414429
Sat Apr 26 13:51:29 2008
Database mounted in Exclusive Mode.
Completed: alter database mount exclusive
Sat Apr 26 13:51:29 2008
alter database open
Sat Apr 26 13:51:29 2008
Beginning crash recovery of 1 threads
attempting to start a parallel recovery with 2 processes
parallel recovery started with 2 processes
Sat Apr 26 13:51:30 2008
Started first pass scan
Sat Apr 26 13:51:30 2008
Completed first pass scan
2 redo blocks read, 3 data blocks need recovery
Sat Apr 26 13:51:30 2008
Started redo application at
Thread 1: logseq 199, block 6043, scn 0.0
Recovery of Online Redo Log: Thread 1 Group 3 Seq 199 Reading mem 0
Mem# 0 errs 0: D:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL10G\REDO03.LOG
Sat Apr 26 13:51:30 2008
Completed redo application
Sat Apr 26 13:51:30 2008
Completed crash recovery at
Thread 1: logseq 199, block 6045, scn 0.1325285
3 data blocks read, 3 data blocks written, 2 redo blocks read
Sat Apr 26 13:51:31 2008
Thread 1 advanced to log sequence 200
Maximum redo generation record size = 120832 bytes
Maximum redo generation change vector size = 116476 bytes
Private_strands 7 at log switch
Thread 1 opened at log sequence 200
Current log# 1 seq# 200 mem# 0: D:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL10G\REDO01.LOG
Successful open of redo thread 1
Sat Apr 26 13:51:31 2008
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Sat Apr 26 13:51:31 2008
SMON: enabling cache recovery
Sat Apr 26 13:51:32 2008
Successfully onlined Undo Tablespace 1.
Sat Apr 26 13:51:32 2008
SMON: enabling tx recovery
Sat Apr 26 13:51:32 2008
Database Characterset is WE8MSWIN1252
Sat Apr 26 13:51:32 2008
Published database character set on system events channel
Sat Apr 26 13:51:33 2008
All processes have switched to database character set
Sat Apr 26 13:51:35 2008
Starting background process QMNC
QMNC started with pid=15, OS id=2160
Sat Apr 26 13:51:37 2008
replication_dependency_tracking turned off (no async multimaster replication found)
Sat Apr 26 13:51:38 2008
Starting background process MMON
Starting background process MMNL
MMON started with pid=16, OS id=3952
MMNL started with pid=17, OS id=3960
Sat Apr 26 13:51:39 2008
Completed: alter database open
Sat Apr 26 13:51:43 2008
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup. -
Report visible for one user but not for other user
Hi all,
We have a situation where a report is visible to one user but not to some other user. What could be the possible explanation for this? Please let me know.
I need quick responses.
Thanks in advance,
SanandaHi Sananda,
Just assign the saem roles as the other user who can view ..
You can inform the Auth/basis team and they shud be able to do this..
The T Code is RSECADMIN>user Tab>Assignment>user.Display and BView the roles here..
or goto SU01 and check for the Roles Tab.....
The New user must have the same roles as that of the other..
Rgds
SVU123
Edited by: svu123 on Sep 22, 2010 7:14 AM
Maybe you are looking for
-
How to use IT_special_groups in ALV Grid ?
Hi Abapers, Am new to ALv's am passing almost all parameters to ALV_GRID FM..! i dont no how to use of options Groups , Filters and I_sel_hide . event i find an Demo example related to Groups .. but while displaying the out put i didnt find any Chang
-
How do you fire a button click event on apex page from fancybox iframe that was created by page
I am trying to fire off the button click event from fancybox iframe. The apex page has a button that launches a fancybox iframe which is loaded with an APEX form. On close of that fancy box, I am trying to fire a click event on the parent page which
-
Hi, Am getting an AS2 adapter comm error. It says service unavailable , cannot connect to JCA adapter. As it is an inbound message, should i assume that there is a problem at the customer AS2 server. Regards Krish
-
Redirecting System.out stream to a TextArea
I hope this isn't a stupid question--I'm blanking pretty hard. I want to use System.setOut() to direct standard output to a TextArea within a Frame. Is there a way to setup a TextArea to receive text from an output stream, or is an intermediary of so
-
its also taking ages to come on when i turn it on and the screen is often messed upand slow and wierd when i use the track pad to move to applications or desktops - it hates me