Screen shifts 1/4" to 3/4" and will not respond

I have an IMac running OS X Version 10.9.3 with a 3.06 GHz Intel Core 2 Duo with 8 GB 1067 MHz DDR3 memory. It has a 500 GB hard drive with 256 GB used and 242 GB available.
The problem is that while using Safari, Mail, Word, Pages, most any program, the entire Screen (including any and all windows that are open) will shift either to the right or to the left a very small amount (1/4" to 3/4") and will then sit there, and I will be unable to complete any action, escape, close, type, etc. Sometimes the screen will jiggle to right or left and then remain unusable until everything returns to the original position at which point I can go on with whatever action I was trying to do. Most often this screen shift is when I am using the mouse on the screen to maneuver around. The screen never goes up or down, only sideways.
Has anyone experienced this problem and found a solution. I took the machine to the Genius Bar and their only solution was to wipe the machine and then have me restore it from back-up after which the problem still remained.

The problem normally caused by graphic drivers corruption. Try reinstall the OS on top of the existing one. Ally our apps and data would be maintained. Reboot then the problem normally go away.

Similar Messages

  • Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

    Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

    Hi deamayfield,
    Thanks for visiting Apple Support Communities.
    If your Music app is unresponsive, try restarting/resetting your iPhone:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Best,
    Jeremy

  • Imac 27" Intel Core 7 CPU. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware scan and all is fine. Did clean wipe from Mavrick back

    Imac 27" Intel Core7  CPU 16 Gig RAM. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware diagnostic and all is fine. Did clean wipe from Mavrick back to Mountain Lion but problem remains. Apple Store can do no more.

    I did some more digging, it appears to be a backlight problem only. I can see the screen very dimly if I use a bright flashlight in a very dark room. It also seems to run ok if the brightness is turned down a LOT.
    So I'm thinking this is a LED driver board issue or the display itself. I'll open it up and check the connection between the two and see if I can get any more clues. At least I can use it somewhat now by dimming the display significantly...

  • I m having problems with my iPad 2 gestures.  The  screen enlarges and  will not respond to my attempts to restore it.

    I m having problems with my iPad 2 gestures.  The  screen enlarges and  will not respond to my attempts to restore it.   Is anyone else having this problem?  What is causing it and what  helps to restore normalcy?

    Try double-tapping the screen with 3 fingers and see if that zooms it back out - and if it does set Settings > General > Accessibility > Zoom 'off'. If it doesn't zoom you back then try triple-clicking the home button and see if that turns it off, and if it does you can then change what a triple-click does via Settings > General > Accessibility > Triple-Click Home.

  • My iPod froze fully charged on the lock screen for 5 minutes, then went off and will not switch back on?

    My iPod froze fully charged on the lock screen for 5 minutes, then went off and will not switch back on?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My iPod nano screen is frozen and will not respond. It shows the song which was playing is paused, but will not resume playing. I have held down all controls, and changed the slide switch, but nothing happens

    my iPod nano screen is frozen and will not respond. It shows the song which was playing is paused, but will not resume playing. I have held down all controls, and changed the slide switch, but nothing happens

    Hi Goofy Goat,
    Welcome to the Apple Support Communities!
    It sounds like you have done some great troubleshooting for your iPod nano that is not responding. In this situation, if resetting it did not resolve, I would suggest restoring the iPod back to its factory settings and then sync your content back onto it from iTunes. Please use the following article as a resource for restoring.
    Restoring iPod to factory settings
    http://support.apple.com/kb/HT1339
    Have a great day,
    Joe

  • My ipod screen went white, then turned blank and will not respond to the buttons i touch. it is also able to open up now somehow, so i can see the inside

    screen went white, then turned blank and will not respond to the buttons i touch. it is also able to open up now somehow, so i can see the inside

    Let the battery fully drain. After charging for at least an hour try:
    iOS: Not responding or does not turn on
    If not successful time for an appointment at the Genius Bar of an Apple store.

  • HT1414 my ipod has a solid color on the screen and will not respond at all what do I do?

    I was playing a game and the it just went to this screen that is kinda red and will not respond at all. I have tried to connect it to itunes to restore it but it never shows up. Is there another way to reset it? Right now I am just waiting for the battery to die.

    Try here:
    iOS: Not responding or does not turn on
    If not successful then do as you are doing, let the battery fully drain. After charging for at least an hour try again.

  • My ipod screen is white, and will not respond to any actions

    My ipod touch screen is white, and will not respond to the home button or the sleep/wake button. The battery never drains all the way, and syncing on itunes doesn't help. I would prefer not to restore it, because i have a lot of information on it. PLEASE HELP!!

    The battery has to drain eventually. Be patient. Letting it drain and charging it back up after it goes black should fix this.

  • HT1414 My ipad has locked-up, it has frozen while running an app, and will not respond to any button,  what do I do?

    My ipad has locked-up, it has frozen while running an app, and will not respond to any button,  what do I do?
    It simply stays on the same screen image, and does not respond to anything.  When I plug it into itunes, there is no indication of its presence.
    The ipad's clock has also stopped.
       eek

    Try a reset:
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • My iPod nano, 5th generation is frozen and will not respond. There is a charge, was just used 2 hrs ago, and has a song showing on the face but will not turn off or respond

    MMy iPod nano 5th generation is frozen and will not respond.  There is a picture of a an artist on it, it has a charge, was used fine 2 hrs ago, won't turn off ?..

    Good Afternoon CPilkington1,
    If your iPod nano is unresponsive, follow the troubleshooting steps below:
    Apple - Support - iPod - iPod nano (5th generation) Troubleshooting
    http://www.apple.com/support/ipod/five_rs/nano5gen/
    If the issue is not resolved after following the steps outlined in the Troubleshooting Assistant, please reply to this post with additional information or any error messages that may appear.
    Regards,
    - Judy

  • My ipod touch it frozen in a apps mode and will not respond how do I correct this

    my ipod touch is frozen on an app and will not respond to anything what can I do to correct this?

    Try here:
    iPhone and iPod touch: Frozen and unresponsive

  • Mac osx 10.6.8 itunes launches automatically and will not respond to quit or force quit

    mac osx 10.6.8 itunes launches automatically and will not respond to quit or force quit in the Activities Monitor.  When I quit or go into the Activities monitor and try to quit, it goes off, briefly, then immediately relaunches.  If i turn the computer off, and then on, iTunes launches automatically.  ITunes 10.4.  The only thing I remember doing different, lately, is I just updated a couple of days ago.  Has anyone else had this issue?  Thanks!

    Reset the page zoom on pages that cause problems, make sure that the window is not maximized:
    *<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    *http://kb.mozillazine.org/Zoom_text_of_web_pages

  • E -mail is froze up and will not respond when trying to open a message

    Was de
    Letting messages from email and app froze up and will not respond to try and open up or delete messages

    Try resetting your device. Hold down the sleep and home keys, past when you see the red power down slider and until you see the silver apple. Let it reboot and try again.

  • I recently created an account and bought a movie. But any time I press "Play" iTunes freezes and will not respond at all.

    Windoes 7 64bit
    I recently created an account and bought a movie. But any time I press "Play" iTunes freezes and will not respond at all.
    I have tried both uninstalling the software and reinstalling it, I have tried to run the software in safemode, and I have tried to change the Quicktime settings to see if that helps.
    Nothing has worked. It always does the same thing, where it freezes the moment I tell it to "play".
    I have tried to use my other computer instead, going through the same process and I got the exact same result where it freezes.
    Therefore it has to be something to do with the software, because the computers use different graphics cards, yet it responds the same.

    Hi Canon-Thought!
    I have an article here for you that deals with this exact issue. You may have already completed many of the steps that this article will suggest, but look over it to see if it suggests something you haven't already tried:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Also, I suggest paying close attention to the list of programs that you would need to uninstall, in order, so that you can fully uninstall iTunes and all related components from your computer. If those programs and steps are not followed exactly, you may end up with issues using iTunes.
    If this issue only happens with one singular movie, you may need to report that there is an issue with your purchase. We have an article for doing that, and it can be found here:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

Maybe you are looking for

  • Pop up text boxes on mouseovers

    I'm looking for an easy way (and the easiest tool to use between Dreamweaver, Fireworks, and Flash [and I'm guessing 'Fireworks']...or maybe Flash---I have Studio MX2004) to create not a 'pop-menu', but 'a Pop-Up TEXT box' on a mouseover event. For e

  • How download  data of me2s   'po order for external  services: in cxcel'

    THIS IS sandipan. I am very new in this field . My requirement is when i am going  to me2s  t.code. then i am giving purchasing group , plant , Service Number as input. then it showing purchase doc . , item , porg , matl... , plant , crcy . It's ok.

  • How do I change the timing in a title effect?

    I am using the "Dramatic" text generator that creates text boxes that fly onto the screen.  I love the look but need to change the timing of the text boxes to coincide with the V/O.  Is this possible or just yet ANOTHER failure of FCP X?

  • Basic questions about JDK1.4.2 & Netbeans3.6

    Hi All, I am planning to install "j2eesdk-1_4-windows [103MB]" & "NetBeans3.6[38MB]" on my Windows machine. Please, advise me for the following questions. 1) What is the name and version of Application and Web Server which "j2eesdk-1_4-windows[103MB]

  • How can I show report with multi value

    Dear Maters, I am creating a report using BUILD A REPORT USING A DYNAMIC TEMPLATE, Although, I choose all product but my report only show value of revenue one product and not summary by quater, only by month. Detail below: I want to report : ACTUAL,