Screen Shot for pick list
Hi All,
Can any one give me a sample screen shot as how a "Pick List" looks in sap and is it trig erred automatically when "Loading Start" button is checked in txn:vt03n.
Rgds,
Nagendra Prasad.J
Hi
http://www.gpspassion.com/upload/picklist.JPG
http://www.gpspassion.com/upload/pick_2.jpg
tcode 'Lt42' is for collective processing, then release the pick list (F5) and lt25n will help you confirm it.
HTH
Shovon
Similar Messages
-
Hi,
Could anybody post the program and form in XML format for pick list smartform /SMB40/SDPLK_L ?
I could not find this smartform in the preconfigured package in market place.
Thanks Appreciated.
AnnaHere is the print program:
* Print of pickinglist for one single delivery note with Smart Form
REPORT /bpr3pf/rvadek01 LINE-COUNT 100 MESSAGE-ID vn.
TABLES: vbco3, "Communicationarea for view
vblkk, "Headerview
vblkp, "Itemview
ltak, "Transportauftrag
adrs, "Communicationarea for Address
riserls, "Serialnumbers
komser, "Communicationarea Serialnumbers
tvst, tvstt, "Shipping point
vbkok, vbpok.
TABLES: nast, "Messages
*nast, "Messages
tnapr, "Programs & Forms
itcpo, "Communicationarea for Spool
arc_params, "Archive parameters
toa_dara, "Archive parameters
addr_key. "Adressnumber for ADDRESS
TYPE-POOLS szadr.
DATA: retcode LIKE sy-subrc, "Returncode
xvbeln LIKE likp-vbeln,
xkomau LIKE likp-vbeln,
xscreen(1) TYPE c. "Output on printer or screen
DATA: BEGIN OF tvblkp OCCURS 0. "Internal table for items
INCLUDE STRUCTURE vblkp.
DATA: END OF tvblkp.
DATA: BEGIN OF tsernr OCCURS 0. "Internal table for serialnumbers
INCLUDE STRUCTURE riserls.
DATA: END OF tsernr.
DATA: BEGIN OF tsernr_print OCCURS 0.
INCLUDE STRUCTURE komser.
DATA: END OF tsernr_print.
DATA: BEGIN OF tltap OCCURS 50. "TA-Positionen
INCLUDE STRUCTURE ltap.
INCLUDE STRUCTURE ltap1.
DATA: END OF tltap.
DATA: BEGIN OF svblkp.
INCLUDE STRUCTURE vblkp.
DATA: END OF svblkp.
INCLUDE /smb40/vblpdata.
*include vblpdata.
INCLUDE /smb40/vbfadata.
*include vbfadata.
INCLUDE /smb40/vbukdata.
*include vbukdata.
INCLUDE /smb40/vbupdata.
*include vbupdata.
INCLUDE /smb40/vbbddata.
*include vbbddata.
INCLUDE /smb40/vbpadata.
*include vbpadata.
INCLUDE /smb40/sadrdata.
*include sadrdata.
* FORM ENTRY *
* Steuerung des Drucks *
FORM entry USING return_code us_screen.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing USING us_screen.
IF retcode NE 0.
return_code = 1.
ELSE.
* Kommimengen an Lieferungen zurückgeben, aber nicht bei Druckansicht
IF xscreen = ' '.
PERFORM delivery_update.
ENDIF.
return_code = 0.
ENDIF.
ENDFORM. "entry
* FORM PROCESSING *
* --> PROC_SCREEN *
FORM processing USING proc_screen.
REFRESH: xlips,
xvbfa,
xvbuk,
xvbup,
yvbfa,
yvbuk,
yvbup.
PERFORM get_data.
CHECK retcode = 0.
PERFORM get_comm USING proc_screen tvst-aland.
CHECK retcode = 0.
PERFORM user_exit1.
PERFORM smartform_print.
CHECK retcode = 0.
ENDFORM. "processing
* S U B R O U T I N E S *
* FORM DELIVERY_UPDATE *
* Ergänzen Lieferung um Kommissionierinformation *
* Ergänzen der Lieferungen um Kommissionierinformation
FORM delivery_update.
DATA: BEGIN OF hvbpok OCCURS 10. "Lieferpositionen Kommiss.
INCLUDE STRUCTURE vbpok.
DATA: END OF hvbpok.
DATA: BEGIN OF sav_nast.
INCLUDE STRUCTURE nast.
DATA: END OF sav_nast.
* DATA: SYNC_FLAG TYPE C. "synchrone Verbuchung?
* Füllen Lieferkopfdaten für Kommi-Update
vbkok-vbeln_vl = xvbeln.
vbkok-vbeln = vblkk-komau.
* Füllen Positionsdaten zu Liefernr.
LOOP AT tvblkp.
hvbpok-vbeln_vl = tvblkp-vbeln.
hvbpok-posnr_vl = tvblkp-posnr.
hvbpok-posnn = tvblkp-posnr.
hvbpok-vbeln = vblkk-komau.
hvbpok-vbtyp_n = 'Q'.
hvbpok-pikmg = tvblkp-komng.
hvbpok-meins = tvblkp-meins.
hvbpok-ndifm = 0.
hvbpok-taqui = ' '.
hvbpok-charg = tvblkp-charg.
hvbpok-matnr = tvblkp-matnr.
hvbpok-brgew = tvblkp-brgew.
hvbpok-gewei = tvblkp-gewei.
hvbpok-volum = tvblkp-volum.
hvbpok-voleh = tvblkp-voleh.
hvbpok-orpos = 0.
APPEND hvbpok.
ENDLOOP.
* IF NAST-VSZTP <> 4.
* SYNC_FLAG = 'X'.
* ELSE.
* SYNC_FLAG = ' '.
* ENDIF.
sav_nast = nast.
CALL FUNCTION 'SD_DELIVERY_UPDATE_PICKING'
EXPORTING
nicht_sperren = 'X'
vbkok_wa = vbkok
aufrufer_t = 'X'
TABLES
vbpok_tab = hvbpok.
nast = sav_nast.
* Freigabe an Datenbank
* COMMIT WORK.
ENDFORM. "delivery_update
* FORM get_comm *
* --> US_SCREEN Output on screen *
* ' ' = printer *
* 'X' = screen *
* --> US_COUNTRY County for telecommunication and SET COUNTRY *
FORM get_comm USING us_screen us_country.
DATA: lvs_itcpo TYPE itcpo,
lvf_device(30) TYPE c,
lvf_dialog(1) TYPE c VALUE ' ',
lvs_recipient LIKE swotobjid,
lvs_sender LIKE swotobjid,
lvs_snast TYPE snast,
lvf_program LIKE sy-repid,
lvs_comm_type TYPE ad_comm,
lvs_comm_values TYPE szadr_comm_values.
* reset return code
retcode = 0.
* if there is a communication strategy used ...
IF NOT nast-tcode IS INITIAL.
* ... use stratagy to get communication type
CALL FUNCTION 'ADDR_GET_NEXT_COMM_TYPE'
EXPORTING
strategy = nast-tcode
* ADDRESS_TYPE =
* ADDRESS_NUMBER = VBDKA-ADRNR
* PERSON_NUMBER = VBDKA-ADRNP
address_number = addr_key-addrnumber
person_number = addr_key-persnumber
IMPORTING
comm_type = lvs_comm_type
comm_values = lvs_comm_values
* TABLES
* STRATEGY_TABLE =
EXCEPTIONS
address_not_exist = 1
person_not_exist = 2
no_comm_type_found = 3
internal_error = 4
parameter_error = 5
OTHERS = 6.
IF sy-subrc <> 0.
retcode = sy-subrc.
syst-msgty = 'E'.
PERFORM protocol_update.
ENDIF.
ENDIF.
* convert communication data
MOVE-CORRESPONDING nast TO lvs_snast.
MOVE sy-repid TO lvf_program.
CALL FUNCTION 'CONVERT_COMM_TYPE_DATA'
EXPORTING
pi_comm_type = lvs_comm_type
pi_comm_values = lvs_comm_values
pi_screen = us_screen
* PI_NEWID =
pi_country = us_country
pi_repid = lvf_program
pi_snast = lvs_snast
IMPORTING
pe_itcpo = lvs_itcpo
pe_device = lvf_device
pe_mail_recipient = lvs_recipient
pe_mail_sender = lvs_sender
EXCEPTIONS
comm_type_not_supported = 1
recipient_creation_failed = 2
sender_creation_failed = 3
OTHERS = 4.
IF sy-subrc <> 0.
retcode = sy-subrc.
syst-msgty = 'E'.
PERFORM protocol_update.
ENDIF.
CHECK retcode EQ 0.
* if there is no communication type
IF lvs_comm_type IS INITIAL.
* set device
CASE nast-nacha.
WHEN '1'.
lvf_device = 'PRINTER'.
WHEN '2'.
lvf_device = 'TELEFAX'.
lvs_itcpo-tdtelenum = nast-telfx.
IF nast-tland IS INITIAL.
lvs_itcpo-tdteleland = us_country.
ELSE.
lvs_itcpo-tdteleland = nast-tland.
ENDIF.
lvs_itcpo-tdsenddate = nast-vsdat.
lvs_itcpo-tdsendtime = nast-vsura.
lvs_itcpo-tdfaxuser = nast-usnam.
WHEN '3'.
lvf_device = 'TELETEX'.
lvs_itcpo-tdtelenum = nast-teltx.
IF nast-tland IS INITIAL.
lvs_itcpo-tdteleland = us_country.
ELSE.
lvs_itcpo-tdteleland = nast-tland.
ENDIF.
lvs_itcpo-tdsenddate = nast-vsdat.
lvs_itcpo-tdsendtime = nast-vsura.
WHEN '4'.
lvf_device = 'TELEX'.
lvs_itcpo-tdtelenum = nast-telx1.
IF nast-tland IS INITIAL.
lvs_itcpo-tdteleland = us_country.
ELSE.
lvs_itcpo-tdteleland = nast-tland.
ENDIF.
lvs_itcpo-tdsenddate = nast-vsdat.
lvs_itcpo-tdsendtime = nast-vsura.
WHEN OTHERS.
lvf_device = 'PRINTER'.
ENDCASE.
ENDIF.
* fill structure itcpo
itcpo = lvs_itcpo.
SET COUNTRY us_country.
* include rvadopfo.
ENDFORM. "get_comm
* FORM GET_DATA *
* General provision of data for the form *
FORM get_data.
DATA: vblkp_lines TYPE p.
* Beschaffen View
xvbeln = nast-objky.
CALL FUNCTION 'RV_DELIVERY_PICK_VIEW'
EXPORTING
vbeln = xvbeln
zweck = 'D'
spras = nast-spras
IMPORTING
vblkk_wa = vblkk
TABLES
vblkp_tab = tvblkp
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
* gibt es zu kommissionierende Positionen, ggf. sortieren
DESCRIBE TABLE tvblkp LINES vblkp_lines.
IF vblkp_lines GT 0.
* Nummernvergabe Kommissionierauftrag
CLEAR vblkk-komau.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
nr_range_nr = '01'
object = 'SD_PICKING'
IMPORTING
number = vblkk-komau
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
ENDIF.
IF vblkk-komau IS INITIAL.
vblkk-komau = sy-datum+2.
vblkk-komau+6(4) = sy-uzeit(4).
ENDIF.
PERFORM sort_pick_list.
retcode = 0.
ELSE.
retcode = 4.
syst-msgid = 'VN'.
syst-msgno = '202'.
syst-msgty = 'E'.
syst-msgv1 = vblkk-vbeln.
PERFORM protocol_update.
CHECK 1 = 2.
ENDIF.
* Lesen Versandstelle
IF vblkk-vstel EQ space.
CLEAR: tvst, tvstt.
ELSE.
SELECT SINGLE * FROM tvst WHERE vstel EQ vblkk-vstel.
IF sy-subrc NE 0.
CLEAR tvst.
syst-msgid = 'VN'.
syst-msgno = '203'.
syst-msgty = 'E'.
syst-msgv1 = 'TVST'.
syst-msgv2 = syst-subrc.
PERFORM protocol_update.
ENDIF.
SELECT SINGLE * FROM tvstt WHERE spras EQ nast-spras
AND vstel EQ vblkk-vstel.
IF sy-subrc NE 0.
CLEAR tvstt.
syst-msgid = 'VN'.
syst-msgno = '203'.
syst-msgty = 'E'.
syst-msgv1 = 'TVSTT'.
syst-msgv2 = syst-subrc.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "get_data
* FORM GET_SERIAL_NO *
* In this routine the serialnumbers are fetched from the *
* database. *
FORM get_serial_no.
REFRESH tsernr.
REFRESH tsernr_print.
CHECK vblkp-anzsn > 0.
* Read the Serialnumbers of a Position.
CALL FUNCTION 'SERIAL_LS_PRINT'
EXPORTING
vbeln = vblkp-vbeln
posnr = vblkp-posnr
TABLES
iserls = tsernr.
* Process the stringtable for Printing.
CALL FUNCTION 'PROCESS_SERIALS_FOR_PRINT'
EXPORTING
i_boundary_left = '(_'
i_boundary_right = '_)'
i_sep_char_strings = ',_'
i_sep_char_interval = '_-_'
i_use_interval = 'X'
i_boundary_method = 'C'
i_line_length = 50
i_no_zero = 'X'
i_alphabet = sy-abcde
i_digits = '0123456789'
i_special_chars = '-'
i_with_second_digit = ' '
TABLES
serials = tsernr
serials_print = tsernr_print
EXCEPTIONS
boundary_missing = 01
interval_separation_missing = 02
length_to_small = 03
internal_error = 04
wrong_method = 05
wrong_serial = 06
two_equal_serials = 07
serial_with_wrong_char = 08
serial_separation_missing = 09.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "get_serial_no
* FORM SMARTFORM_PRINT
FORM smartform_print.
DATA: e_werks LIKE tvblkp-werks VALUE ' ',
e_lgort LIKE tvblkp-lgort VALUE ' ',
e_lgnum LIKE tvblkp-lgnum VALUE ' ',
e_mbdat LIKE tvblkp-mbdat VALUE IS INITIAL.
DATA: lf_fm_name TYPE rs38l_fnam.
DATA: ls_control_param TYPE ssfctrlop.
DATA: ls_composer_param TYPE ssfcompop.
DATA: ls_recipient TYPE swotobjid.
DATA: ls_sender TYPE swotobjid.
DATA: lf_formname TYPE tdsfname.
DATA: ls_addr_key LIKE addr_key.
CLEAR retcode.
* nast_key = objky.
PERFORM set_print_param USING ls_addr_key
CHANGING ls_control_param
ls_composer_param
ls_recipient
ls_sender
retcode.
*Get the Smart Form name.
IF NOT tnapr-sform IS INITIAL.
lf_formname = tnapr-sform.
ELSE.
MESSAGE e001(/smb40/ssfcomposer).
ENDIF.
* determine smartform function module for invoice
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING formname = lf_formname
* variant = ' '
* direct_call = ' '
IMPORTING fm_name = lf_fm_name
EXCEPTIONS no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
* error handling
retcode = sy-subrc.
IF sy-subrc = 1.
MESSAGE e001(/smb40/ssfcomposer).
ENDIF.
IF sy-subrc = 2.
MESSAGE e002(/smb40/ssfcomposer).
ENDIF.
PERFORM protocol_update.
ENDIF.
CALL FUNCTION lf_fm_name
EXPORTING
archive_index = toa_dara
* ARCHIVE_INDEX_TAB =
archive_parameters = arc_params
control_parameters = ls_control_param
* MAIL_APPL_OBJ =
mail_recipient = ls_recipient
mail_sender = ls_sender
output_options = ls_composer_param
user_settings = ' '
vblkk = vblkk
TABLES
tvblkp = tvblkp
* IMPORTING
* DOCUMENT_OUTPUT_INFO =
* JOB_OUTPUT_INFO =
* JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
retcode = sy-subrc.
PERFORM protocol_update.
* get SmartForm protocoll and store it in the NAST protocoll
PERFORM add_smfrm_prot.
ENDIF.
ENDFORM. "smartform_print
* FORM PROTOCOL_UPDATE *
* The messages are collected for the processing protocol. *
FORM protocol_update.
CHECK xscreen = space.
CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
EXPORTING
msg_arbgb = syst-msgid
msg_nr = syst-msgno
msg_ty = syst-msgty
msg_v1 = syst-msgv1
msg_v2 = syst-msgv2
msg_v3 = syst-msgv3
msg_v4 = syst-msgv4
EXCEPTIONS
OTHERS = 1.
ENDFORM. "protocol_update
* FORM SENDER *
* This routine determines the address of the sender (Table VBUR)*
FORM user_exit1.
ENDFORM. "user_exit1
INCLUDE /smb40/mv50bfz1.
*include mv50bfz1.
*& Form set_print_param
* text
* -->P_LS_ADDR_KEY text
* <--P_LS_CONTROL_PARAM text
* <--P_LS_COMPOSER_PARAM text
* <--P_LS_RECIPIENT text
* <--P_LS_SENDER text
* <--P_RETCO text
FORM set_print_param USING is_addr_key LIKE addr_key
CHANGING cs_control_param TYPE ssfctrlop
cs_composer_param TYPE ssfcompop
cs_recipient TYPE swotobjid
cs_sender TYPE swotobjid
cf_retcode TYPE sy-subrc.
DATA: ls_itcpo TYPE itcpo.
DATA: lf_repid TYPE sy-repid.
DATA: lf_device TYPE tddevice.
DATA: ls_recipient TYPE swotobjid.
DATA: ls_sender TYPE swotobjid.
lf_repid = sy-repid.
IF itcpo IS INITIAL.
CALL FUNCTION 'WFMC_PREPARE_SMART_FORM'
EXPORTING
pi_nast = nast
pi_addr_key = is_addr_key
pi_repid = lf_repid
IMPORTING
pe_returncode = cf_retcode
pe_itcpo = ls_itcpo
pe_device = lf_device
pe_recipient = cs_recipient
pe_sender = cs_sender.
IF cf_retcode = 0.
MOVE-CORRESPONDING ls_itcpo TO cs_composer_param.
* CS_CONTROL_PARAM-NO_OPEN
* CS_CONTROL_PARAM-NO_CLOSE
cs_control_param-device = lf_device.
cs_control_param-no_dialog = 'X'.
cs_control_param-preview = xscreen.
cs_control_param-getotf = ls_itcpo-tdgetotf.
cs_control_param-langu = nast-spras.
* CS_CONTROL_PARAM-REPLANGU1
* CS_CONTROL_PARAM-REPLANGU2
* CS_CONTROL_PARAM-REPLANGU3
* CS_CONTROL_PARAM-STARTPAGE
ENDIF.
ELSE.
MOVE-CORRESPONDING itcpo TO cs_composer_param.
* CS_CONTROL_PARAM-NO_OPEN
* CS_CONTROL_PARAM-NO_CLOSE
cs_control_param-device = lf_device.
cs_control_param-no_dialog = 'X'.
cs_control_param-preview = xscreen.
cs_control_param-getotf = itcpo-tdgetotf.
cs_control_param-langu = nast-spras.
* CS_CONTROL_PARAM-REPLANGU1
* CS_CONTROL_PARAM-REPLANGU2
* CS_CONTROL_PARAM-REPLANGU3
* CS_CONTROL_PARAM-STARTPAGE
ENDIF.
ENDFORM. " set_print_param
**& Form protocol_update_i
** text
** --> p1 text
** <-- p2 text
*form protocol_update_i.
* check xscreen = space.
* call function 'NAST_PROTOCOL_UPDATE'
* exporting
* msg_arbgb = syst-msgid
* msg_nr = syst-msgno
* msg_ty = syst-msgty
* msg_v1 = syst-msgv1
* msg_v2 = syst-msgv2
* msg_v3 = syst-msgv3
* msg_v4 = syst-msgv4
* exceptions
* others = 1.
*endform. " protocol_update_i
*& Form add_smfrm_prot
* text
* --> p1 text
* <-- p2 text
FORM add_smfrm_prot.
DATA: lt_errortab TYPE tsferror.
DATA: lf_msgnr TYPE sy-msgno.
DATA: l_s_log TYPE bal_s_log,
p_loghandle TYPE balloghndl,
l_s_msg TYPE bal_s_msg.
FIELD-SYMBOLS: <fs_errortab> TYPE LINE OF tsferror.
* get smart form protocoll
CALL FUNCTION 'SSF_READ_ERRORS'
IMPORTING
errortab = lt_errortab.
* add smartform protocoll to nast protocoll
LOOP AT lt_errortab ASSIGNING <fs_errortab>.
CLEAR lf_msgnr.
lf_msgnr = <fs_errortab>-errnumber.
CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
EXPORTING
msg_arbgb = <fs_errortab>-msgid
msg_nr = lf_msgnr
msg_ty = <fs_errortab>-msgty
msg_v1 = <fs_errortab>-msgv1
msg_v2 = <fs_errortab>-msgv2
msg_v3 = <fs_errortab>-msgv3
msg_v4 = <fs_errortab>-msgv4
EXCEPTIONS
OTHERS = 1.
ENDLOOP.
* open the application log
l_s_log-extnumber = sy-uname.
CALL FUNCTION 'BAL_LOG_CREATE'
EXPORTING
i_s_log = l_s_log
IMPORTING
e_log_handle = p_loghandle
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT lt_errortab ASSIGNING <fs_errortab>.
MOVE-CORRESPONDING <fs_errortab> TO l_s_msg.
CALL FUNCTION 'BAL_LOG_MSG_ADD'
EXPORTING
i_log_handle = p_loghandle
i_s_msg = l_s_msg
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDLOOP.
CALL FUNCTION 'BAL_DSP_LOG_DISPLAY'.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " add_smfrm_prot -
Hi,
Someone knows smartforms and its program for picking list?.
I don't want to use sapscript SD_PICK_COLL and its program RVADSK01.
Thanks very much.
Matteo Vernile.hi,
go through this code.
Program Description: *
A packing list is printed for each outbound delivery. *
Before the delivery is made to a customer the goods are *
packed in a box or any other container and to have a *
list of products put in the package packing list is *
required. This packing list will be printed upon pick *
confirmation or at a time the delivery note is created. *
REPORT z_sd_rep_000002 MESSAGE-ID zdevmsg.
********************TABLES USED***************************************
TABLES: likp, "SD Document: Delivery Header Data
lips, "SD document: Delivery: Item data
vbak, "Sales Document: Header Data
vbpa, "Sales Document: Partner
vbuk, "Sales Document: Header Status and Admin Data
vttp, "Shipment Item
vttk, "Shipment Header,
adrc, "Addresses (Business Address Services)
tvst, "Organizational Unit: Shipping Points
vbfa, "Sales Document Flow
kna1, "General Data in Customer Master
vepo, "Packing: Handling Unit Item (Contents)
vekp. "Handling Unit - Header Table
INCLUDE rvadtabl.
********************WORK AREA*****************************************
DATA : wa_zpacklist TYPE zpacklist, "structure to hold all the data
"that has to be passed to the
"smart form
wa_item TYPE LINE OF zitempack."workarea of main item struct
DATA : wa_item_lips TYPE LINE OF zitempack."wrkarea for data selected
"from LIPS table
********************INTERNAL TABLE************************************
DATA : i_item_lips TYPE zitempack, "Internal table for data
"selected from LIPS table
i_item TYPE zitempack. "main internal table for
"items data.
*****************************CONSTANTS********************************
CONSTANTS : c_posnn(1) TYPE c VALUE 'J',
YATHAM6 Insert Begin
c_vbtyp_v(1) type c VALUE 'C',
YATHAM6 Insert End
c_parvw_stp TYPE vbpa-parvw VALUE 'AG',
c_parvw_shp TYPE vbpa-parvw VALUE 'WE',
c_formname TYPE tdsfname VALUE 'Z_PACKINGLIST',
c_zdevmsg TYPE SY-MSGID value 'ZDEVMSG',
c_e TYPE SY-MSGTY VALUE 'E',
c_000 TYPE SY-MSGNO VALUE '000',
c_X(1) TYPE c VALUE 'X',
c_fully_picked(1) TYPE c VALUE 'C'.
***************************GLOBAL VARIABLE****************************
DATA : v_objnm LIKE thead-tdname,
v_tknum_tmp LIKE vttp-tknum,
v_formname TYPE rs38l_fnam,
v_venum TYPE vekp-venum,
v_screen, "Output on printer or screen
v_picked(1).
************************MAIN PROGRAM ***********************************
FORM entry USING return_code us_screen.
DATA: v_retcode TYPE sy-subrc.
CLEAR v_retcode.
Clear any previous data.
CLEAR wa_zpacklist.
v_screen = us_screen.
Check whether the Delivery number is already been picked.If it is
picked the set the print parameters
PERFORM processing USING us_screen
CHANGING v_retcode.
IF v_retcode NE 0.
return_code = 1.
ELSE.
return_code = 0.
ENDIF.
ENDFORM. "ENTRY
*& Form PROCESSING
Check whether the Delivery number is already been picked.If it is
picked the set the print parameters
FORM processing USING us_screen
CHANGING v_retcode.
DATA: v_fm_name TYPE rs38l_fnam.
DATA: v_control_param TYPE ssfctrlop.
DATA: v_composer_param TYPE ssfcompop.
DATA: v_recipient TYPE swotobjid.
DATA: v_sender TYPE swotobjid.
DATA: v_formname TYPE tdsfname .
get SmartForm from customizing table TNAPR
v_formname = tnapr-sform.
Check whether the delivery number has been picked.If it is picked
select the relevant data for that delivery number
PERFORM get_data CHANGING v_retcode.
CHECK v_retcode EQ 0.
Set the print parameters for Smartform
PERFORM set_print_param CHANGING v_control_param
v_composer_param
v_recipient
v_sender
v_retcode.
Check whether the Smart form exists.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = c_formname
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = v_formname
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
v_retcode = sy-subrc.
PERFORM protocol_update.
ENDIF.
Check the structure wa_zpacklist for data.
IF NOT wa_zpacklist IS INITIAL.
CALL FUNCTION v_formname
EXPORTING
archive_index = toa_dara
archive_parameters = arc_params
control_parameters = v_control_param
mail_recipient = v_recipient
mail_sender = v_sender
output_options = v_composer_param
user_settings = ' '
wa_zpacklist = wa_zpacklist
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5. .
IF sy-subrc <> 0.
error handling
v_retcode = sy-subrc.
PERFORM protocol_update.
ENDIF.
ELSE.
IF v_screen = space.
CALL FUNCTION 'NAST_PROTOCOL_INIT_AND_LOAD'
EXPORTING
cps_nast = nast.
CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
EXPORTING
msg_arbgb = c_ZDEVMSG
msg_nr = c_000
msg_ty = c_E
msg_v1 = syst-msgv1
msg_v2 = syst-msgv2
msg_v3 = syst-msgv3
msg_v4 = syst-msgv4
EXCEPTIONS
OTHERS = 1.
ELSE.
MESSAGE e000 WITH 'No Data Exists, to Display Output'(002).
ENDIF. " IF v_screen = space.
ENDIF. " if not wa_zpacklist[] is initial
ENDFORM. " PROCESSING
*& Form get_data
Check whether the delivery number has been picked.If it is picked
select the relevant data for that delivery number
FORM get_data CHANGING v_retcode.
This is the Input obtained from the NAST entry, Delivery Number
wa_zpacklist-vbeln = nast-objky.
CLEAR v_picked.
Check if the Delivery has Not been Picked, if not then Do Not Display
the Layout and display an Error Message
CLEAR vbuk.
SELECT SINGLE kostk
FROM vbuk
INTO vbuk-kostk
WHERE vbeln EQ wa_zpacklist-vbeln.
The Picking should Not be Processed, Else Display a Msg
IF vbuk-kostk NE c_fully_picked AND vbuk-kostk NE space.
v_picked = c_X.
v_retcode = 1.
IF v_screen = space.
CALL FUNCTION 'NAST_PROTOCOL_INIT_AND_LOAD'
EXPORTING
cps_nast = nast.
CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
EXPORTING
msg_arbgb = c_ZDEVMSG
msg_nr = c_000
msg_ty = c_E
msg_v1 = syst-msgv1
msg_v2 = syst-msgv2
msg_v3 = syst-msgv3
msg_v4 = syst-msgv4
EXCEPTIONS
OTHERS = 1.
ELSE.
MESSAGE e000 WITH
'Delivery has not been Picked-Please Check'(001).
ENDIF.
ENDIF.
CHECK v_retcode = 0.
get all the header related data from LIKP,VBAK,VBFA,VTTP,VTTK
PERFORM get_header_data.
get the address numbers for shipping point ,ship-to-party and
sold-to-party from VBFA,TVST tables
PERFORM get_addr_no.
get all the item details from VBAP ,LIPS
PERFORM get_item_data.
ENDFORM. " get_data
*& Form get_header_data
Get all the header related data from LIKP,VBAK,VBFA,VTTP,VTTK
FORM get_header_data.
select the header data from LIKP based on Delivery number.
select the following fields and put it into workarea wa_zpacklist.
SELECT SINGLE vbeln "Delivery number
kunnr "Sold to party
kunag "Shipt to party
inco1 "Inco term
inco2 "Inco term 2
btgew "Total Weight
gewei "Net weight
anzpk "Total noumber of packages in delivery
vkorg "Sales Organization
vstel "Shipping Point/Receiving Point
bldat "Date on which the Docu. was created
FROM likp
INTO CORRESPONDING FIELDS OF wa_zpacklist
WHERE vbeln = wa_zpacklist-vbeln.
to get Purchase order number (BSTNK),
Sales order number (VBELV),
Contract number (VBELN_GRP),
Customer order date first get the Sales document from VBFA
using Delivery number (LIKP-VBELN) and VBTYP_N in the where clause.
YATHAM6 Del Begin - D47K910351 05/12/2004
SELECT SINGLE vbelv "Sales Document
INTO wa_zpacklist-vbelv
FROM vbfa
WHERE vbeln = wa_zpacklist-vbeln
AND vbtyp_n = c_posnn
YATHAM6 Insert Begin - 04/15/2004
Preceding Document category only Order need to be selected
Without this it is selecting Quote and/or Inquiry because of
Select single (Which would select the first entry)
AND vbtyp_v = c_vbtyp_v.
YATHAM6 Insert End - 04/15/2004
YATHAM6 Del End - D47K910351 05/12/2004
YATHAM6 Insert Begin - D47K910351 05/12/2004
When a Sales order is created with reference to another sales order
two precding document categorys will be available for a delivery.
Example: Order with subsequent delivery free of charge
Need to get latest preceding document. This change was made to pull
correct preceding document which will be on delivery line item.
All delivery items will have the same preceding document number.
select single vgbel from lips into wa_zpacklist-vbelv
where vbeln = wa_zpacklist-vbeln.
YATHAM6 Insert End - D47K910351 05/12/2004
SELECT SINGLE bstnk "Customer purchase order number
vbeln_grp "Master Contract NUmber
bstdk "Customer Order date
INTO (wa_zpacklist-bstnk,
wa_zpacklist-vbeln_grp,
wa_zpacklist-bstdk)
FROM vbak
WHERE vbeln = wa_zpacklist-vbelv.
select shipment number from VTTP table using wa_zpaclist-vbeln in the
where clause.
SELECT tknum "Shipment Number
FROM vttp
UP TO 1 ROWS
INTO wa_zpacklist-tknum_tmp
WHERE vbeln = wa_zpacklist-vbeln.
ENDSELECT.
for this value of wa_zpacklist-tknum_tmp select
External identification 2
Shipping type
Number of forwarding agent
from VTTK
SELECT SINGLE exti2 "External identification 2
vsart "Shipping type
tdlnr "Number of forwarding agent
INTO (wa_zpacklist-exti2,
wa_zpacklist-vsart,
wa_zpacklist-tdlnr)
FROM vttk
WHERE tknum = wa_zpacklist-tknum_tmp.
get the packing date from VEkP table for which Internal Handling
Unit Number(VENUM) is required from VEPO table.
get the value from VEPO table for the delivery number.
SELECT venum
UP TO 1 ROWS
FROM vepo
INTO v_venum
WHERE vbeln = wa_zpacklist-vbeln.
EXIT.
ENDSELECT.
CHECK sy-subrc = 0.
SELECT SINGLE erdat
FROM vekp
INTO wa_zpacklist-erdat
WHERE venum = v_venum.
ENDFORM. " get_header
*& Form get_item
Get all the item details from VBAP ,LIPS
FORM get_item_data.
refresh the internal tables of item data.
data: v_tabix like sy-tabix. "YATHAM6 Insert 03/31/2004
REFRESH : i_item,
i_item_lips.
get the item details from VBAP table based on the sales document
number(VBELV) and store the data in i_item
SELECT posnr "Sales Document Item
posex "Item Number of the Underlying Purchase
"Order
kwmeng "Quantity Ordered
kdmat "Customer Item Number
INTO CORRESPONDING FIELDS OF
TABLE i_item
FROM vbap
WHERE vbeln EQ wa_zpacklist-vbelv.
get the item details from LIPS based on Delivery number and
ZZCATNO(Catalog numer)from mara using an inner join between LIPS and
MARA using matnr as key
*Begin of GONAGUNTLA2 - @0001 02/11/2004 D47K906487
SELECT a~vbeln "Delivery Number
a~vtweg "Distribution Channel
a~posnr "Delivery item
a~lfimg "Actual quantity delivered (in sales units)
a~matnr "Material Number
b~zzcatno "Catlog Number for each material
FROM lips AS a
INNER JOIN
mara AS b
ON amatnr = bmatnr
INTO CORRESPONDING FIELDS OF
TABLE i_item_lips
WHERE a~vbeln = wa_zpacklist-vbeln.
SELECT a~vbeln "Delivery Number
a~vtweg "Distribution Channel
a~posnr "Delivery item
a~pstyv "Delivery item category
a~lfimg
"Actual quantity delivered (in sales units)
a~matnr "Material Number
a~uepos
"Higher-level item in bill of material structures
a~vgpos "Sales order line item
b~zzcatno "Catlog Number for each material
FROM lips AS a
INNER JOIN
mara AS b
ON amatnr = bmatnr
INTO CORRESPONDING FIELDS OF
TABLE i_item_lips
WHERE a~vbeln = wa_zpacklist-vbeln.
*End of GONAGUNTLA2 - @0001 02/11/2004 D47K906487
clear the workareas
CLEAR : wa_item,
wa_item_lips.
loop at the main internal table which contains the item data.
so that the data in the internal table i_item_lips is passed in the
i_item table
LOOP AT i_item INTO wa_item.
v_tabix = sy-tabix. "YATHAM6 Insert 03/31/2004
read the internal table i_item_lips for key Item Number(POSNR)
because the only link between the LIPS table and VBAP table is
(POSNR) for the same delivery number.
*Begin of GONAGUNTLA2 - @0001 02/12/2004
READ TABLE i_item_lips
INTO wa_item_lips
WITH KEY posnr = wa_item-posnr.
READ TABLE i_item_lips
INTO wa_item_lips
WITH KEY vgpos = wa_item-posnr.
*End of GONAGUNTLA2 - @0001 02/12/2004
check whether the same POSNR value is there in the I_item_lips table
IF sy-subrc = 0.
*Begin of GONAGUNTLA2 - @0001 02/12/2004
perform get_previous_del_qty using wa_zpacklist-vbelv
wa_item_lips-vgpos
wa_item_lips-vbeln
wa_item_lips-posnr
wa_item-kwmeng.
move wa_item-kwmeng to wa_item_lips-kwmeng.
*End of GONAGUNTLA2 - @0001 02/12/2004
to find out the Back Orders subtract Ordered Qty (KWMENG)
with Actual Qty (LFIMG)
wa_item_lips-zbkord = wa_item-kwmeng - wa_item_lips-lfimg.
Begin of Modifications - YATHAM6 12/15/2003
if wa_item-posex is not blank the repace wa_item-posnr with it.If *
it is not blank then don't do anything.
IF NOT wa_item-posex IS INITIAL.
MOVE wa_item-posex TO wa_item_lips-posnr .
ENDIF. "if not wa_item-posex is initial.
If wa_item-posex is initial.
Begin of GONAGUNTLA2 - @0001 02/12/2004
move wa_item-posnr to wa_item_lips-posex.
move wa_item_lips-posnr to wa_item_lips-posex.
*End of GONAGUNTLA2 - @0001 02/12/2004
else.
move wa_item-posex to wa_item_lips-posex.
endif.
End of Modifications - YATHAM6 12/15/2003
modify the internal table i_item by transporting VBELN LFIMG ZCALC.
*Begin of GONAGUNTLA2 - @0001 02/11/2004 D47K906487
MODIFY i_item FROM wa_item_lips
TRANSPORTING vbeln "Delivery Number
posnr "Delivery item
posex " YATHAM6 Insert
*lfimg "Actual Quantity Delivered
zbkord "Back Order
zzcatno "Catlog Number
matnr "Material Number
vtweg
WHERE posnr = wa_item-posnr.
MODIFY i_item FROM wa_item_lips "YATHAM6 Del 03/31/2004
MODIFY i_item FROM wa_item_lips index v_tabix
TRANSPORTING vbeln "Delivery Number
posnr "Delivery item
posex " YATHAM6 Insert
KWMENG
" gonaguntla2 Insert
lfimg
"Actual Quantity Delivered
zbkord "Back Order
zzcatno "Catlog Number
matnr "Material Number
vtweg
uepos
pstyv.
*Table i_item should be updated with the corresponding entry not with
*the
item number.
WHERE posnr = wa_item-posnr. "YATHAM6 Del
else.
YATHAM6 Mod Begin - 04/22/2004
Delete the Current row instead of item. Because the Delivery item
sequence could be different than that of the Sales Order item #.
delete i_item where posnr = wa_item-posnr.
delete i_item index v_tabix.
YATHAM6 Mod End - 04/22/2004
*End of GONAGUNTLA2 - @0001 02/11/2004 D47K906487
ENDIF. " if sy-subrc = 0.
ENDLOOP. "loop at i_item
now once the i_item internal table is full
check it.
IF NOT i_item[] IS INITIAL.
sort i_item[] by vbeln descending posex. "YATHAM6 Insert
move the data from i_item into the structure wa_zpacklist.
wa_zpacklist-zitempack_tb[] = i_item[].
ENDIF. "if not i_item[] is initial.
ENDFORM. " get_item
*& Form get_addr
text
Get the address numbers for shipping point ,ship-to-party and
sold-to-party from VBFA,TVST tables
FORM get_addr_no .
To find out the addresses of sold-to-party, goto table VBPA select
the address number ADRNR
SELECT SINGLE adrnr "Address Number
INTO wa_zpacklist-adrnrstp
FROM vbpa
YATHAM6 Mod Begin - 04/15/2004
Get the address numbers for the Delivery instead of Sales order
WHERE vbeln = wa_zpacklist-vbelv
WHERE vbeln = wa_zpacklist-vbeln
YATHAM6 Mod End - 04/15/2004
AND parvw = c_parvw_stp.
To find out the addresses of ship-to-party, goto table VBPA select
the address number ADRNR
SELECT SINGLE adrnr "Address Number
INTO wa_zpacklist-adrnrshp
FROM vbpa
YATHAM6 Mod Begin - 04/15/2004
Get the address numbers for the Delivery instead of Sales order
WHERE vbeln = wa_zpacklist-vbelv
WHERE vbeln = wa_zpacklist-vbeln
YATHAM6 Mod End - 04/15/2004
AND parvw = c_parvw_shp.
To select the addresses for Shipping point find out the address *
number from TVST table .
SELECT SINGLE adrnr "Address Number
INTO wa_zpacklist-adrnr
FROM tvst
WHERE vstel = wa_zpacklist-vstel.
ENDFORM. " get_addr
*& Form set_print_param
Set the print paramters for the smartform
FORM set_print_param CHANGING v_control_param TYPE ssfctrlop
v_composer_param TYPE ssfcompop
v_recipient TYPE swotobjid
v_sender TYPE swotobjid
v_retcode TYPE sy-subrc.
DATA: v_itcpo TYPE itcpo.
DATA: v_repid TYPE sy-repid.
DATA: v_device TYPE tddevice.
v_repid = sy-repid.
CALL FUNCTION 'WFMC_PREPARE_SMART_FORM'
EXPORTING
pi_nast = nast
pi_repid = v_repid
IMPORTING
pe_returncode = v_retcode
pe_itcpo = v_itcpo
pe_device = v_device
pe_recipient = v_recipient
pe_sender = v_sender.
IF v_retcode = 0.
MOVE-CORRESPONDING v_itcpo TO v_composer_param.
v_control_param-device = v_device.
v_control_param-no_dialog = c_X.
v_control_param-preview = v_screen.
v_control_param-getotf = v_itcpo-tdgetotf.
v_control_param-langu = nast-spras.
ENDIF.
ENDFORM. " set_print_param
*& Form protocol_update
text
Error Handling
FORM protocol_update .
CHECK v_screen = space.
CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
EXPORTING
msg_arbgb = syst-msgid
msg_nr = syst-msgno
msg_ty = syst-msgty
msg_v1 = syst-msgv1
msg_v2 = syst-msgv2
msg_v3 = syst-msgv3
msg_v4 = syst-msgv4
EXCEPTIONS
OTHERS = 1.
ENDFORM. " protocol_update
*& Form get_previous_del_qty
text
--> p1 text
<-- p2 text
FORM get_previous_del_qty using f_so
f_so_item
f_del
f_del_item
f_so_qty.
data: begin of i_vbfa_tab occurs 0,
vbeln like vbfa-vbeln,
posnn like vbfa-posnn,
end of i_vbfa_tab.
data: fv_lfimg like lips-lfimg.
select vbeln posnn into table i_vbfa_tab from vbfa
where vbelv eq f_so
and posnv eq f_so_item
and vbtyp_n eq 'J'.
loop at i_vbfa_tab.
if i_vbfa_tab-vbeln ne f_del.
clear fv_lfimg.
select single lfimg into fv_lfimg
from lips
where vbeln eq i_vbfa_tab-vbeln
and posnr eq i_vbfa_tab-posnn.
f_so_qty = f_so_qty - fv_lfimg.
endif.
endloop.
ENDFORM. " get_previous_del_qty -
hai every body
iam trying to configure the output type for picking list,i have done the condition technique and also maintained condition record.i have assigned that output type to the shipping point also but when i select the output for picking from delivery it is showing in display mode,the system is not letting me to assign the output type in that screen.
what is the problem i a have done pl tell the procedure if any body knows.
thanks in adv,
rajeshHi Rajesh
From Release 4.5A, the system does no longer display the actions for SD picking in the implementation guide.
If you want to use the picking list according to the "old" procedure, you can maintain the list as follows:
o Carry out Transaction V/38 to maintain the output types.
o Carry out Transaction OVLT to assign the picking list types to the
shipping points.
o Carry out Transaction V/53 to assign the picking lists to own
forms and programs.
Picking Output Type is determined in transaction v/23. Though You can have one per shipping point unfortunately. If more flexibility is needed, one can use delivery output or lean WM and transfer order output.
Ensure that "Multiple issuing" check box in v/34 is switched off for the corresponding output type.
Reward if useful to u -
Why won't my camera work? I used the screen shot for the first time and since i did that every time i take a picture the shutter closes as though it's taking it but no picture gets taken...help! Any suggestions?
Hey briannagrace96,
Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
Try the iPod troubleshooting assistant:
If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
Restart the iPod Service
Restart the Apple Mobile Device Service
Empty your Temp directory and restart
Verify that the Apple Mobile Device USB Driver is installed
Change your iPod's drive letter
Remove and reinstall iTunes
Disable conflicting System Services and Startup Items
Update, Reconfigure, Disable, or Remove Security Software
Deleting damaged or incorrect registry keys
Take care,
David -
Can any one give step by step screen shots for dialog programming
can any one give step by step screen shots for dialog programming ..
thanks
venki...Hi
see the following links and example programs and practice the same dialog pool program
Check the below link:
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
<b>Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB</b>
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
<b>Reward points for useful Answers</b>
Regards
Anji -
I've been taking screen shots for years and opening them from my desktiop. Suddenly, today, I've lost the ability to open them. I can right click on the picture and do "quicklook", but that's it. They just won't open.
Similary, if I scan an image and save it as a PDF file in pictures, I'm suddenly not able to open it either!
Why?Move the com.apple.screencapture.plist file out of /username/Library/Preferences/ to the Desktop, log out and back in, and try again.
BTW, use the default 10 point setting for text. Your choice just wastes screen space. -
Screen shots for creating Stock transport order
hi,
Can anyone send me the screen shots for creating Stock transport order between plants within company code?
Regards,
Swathihi
pls refer to HELP.SAP.COM INTHIS SELECT BEST PRACTISES and in that select building blocks it will ask country wise select india and give ur req type of industry .here u can see J05 AS materials management also other req i mean sto and all u can configure
regards
srinivas kona -
Screen shots for creating class in se24(class builder)
HI
i am a beginner in abap objects...
can anyone give me the screen shots for creating a class in se24.
plz dont give links...
only screenshots....
useful answer wil be rewarded.
Regards,
jyothsnahi,
Follow this link for step by step tutorials.....cant paste screen shots here, so u will have to follow link to see it.
http://www.****************/Tutorials/OOPS/MainPage.htm
or use this PPT file
http://www.esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder
Hope this helps, Do reward.
Edited by: Runal Singh on Mar 26, 2008 3:45 PM -
Create Smart form for Pick list
Hi,
How do i start for creating a smart form for pick list.
Regards
Ajayhi
refer this
http://www.****************/Tutorials/Smartforms/PO/page1.htm
Edited by: Swetha on Jul 10, 2008 6:15 PM -
Problem onStandard Smartform for Picking list
Hi Experts..
I want to know is there any standard SMARTFORM for PICKING LIST?
and also let me know PrintProgram name also.....Hi,
Check the below link.. It contains a document.. Go trough it.
Point 3.1.4
[http://help.sap.com/bp_bblibrary/470/documentation/J16_BB_ConfigGuide_EN_US.doc]
Edited by: Lokesh Tarey on Jul 15, 2010 2:03 PM -
Total screen shots for module pool programming
Hi Abapers,
Any one could send me the screen shots for the module pool programming with multiple screens.
Thanks in advance.
Regards
YubiYou can check the transaction ABAPDOCU for sample programs..
Check the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
Also chk this thread.
Urgent: : Requiremnt on module pool -
Hi every one
I am not good in Time Mgmt. mainly I want screen shots for Holiday Calendar, Break Schedule, DWS,PWS, WSR, Variants, Day types and Planed working time. So I am looking for a screen shots. Could you please help me? I would like to practice it over the system by using the screen shots which is already prepared by some body
Can anybody help me. It is very useful for me.
Thanks and regards
Seenuwhy do u want screen shots
The following is the config. document of TM.
I think its helpful to u.
Work Schedules Personnel Time Management IMG Define Public Holiday Classes
Work Personnel Time Management IMG Group Personnel Subareas for the
Work Personnel Subarea Groupings Schedules Schedule
Personnel Work Schedules Personnel Time Management IMG Group
Personnel Subareas for theDaily Work ScheduleSubarea Groupings
Daily Work Schedules Work Schedules Personnel Time Management
IMG Define Daily Work Schedules
Work Personnel Time Management IMG Define Period Work Schedules.
Period Work Schedules Schedules
IMG Define Day Day Types Work Schedules Personnel Time Management Types.
Day Types Work Schedules Personnel Time Management IMG Define Day Types.
Day Work Schedules Personnel Time Management IMG Define Special Days.Types
Work Personnel Time Management IMG Define Employee Subgroup Work
Schedule Rules and Work Schedules Schedules Groupings
Work Work Schedules Personnel Time Management IMG Define Groupings
for the Public HolidaySchedule Rules and Work Schedules Calendar.
Work Work Schedules Personnel Time Management IMG Set Work
Schedule Rules and WorkSchedule Rules and Work Schedules Schedules.
Work Work Schedules Personnel Time Management IMG Generate Work
Schedules ManuallySchedule Rules and Work Schedules
IMG Set Planned Working Time Work Schedules Personnel Time
Management Default Value for the Work Schedule.
Personnel Time Management IMG Set Default Value for Time
Management Planned Working Time Work Schedules Status.
Time Data Recording and Personnel Time Management IMG Define
Personnel Subareas for Substitution Substitutions Administration
Types.
Time Data Recording and Personnel Time Management IMG Set Defaults
for Substitution Types. Substitutions Administration
IMG Absences Time Data Recording and Administration Personnel Time
Management Group Personnel Subareas for Attendances and Absence
Catalog Absences.
Time Data Recording and Personnel Time Management IMG Define Absence
Types. Absence Catalog Absences Administration
IMG Absences Time Data Recording and Administration Personnel
Time Management Define Counting Classes for the Period Work Absence
Counting Absence Catalog Schedule.
Time Data Recording and Personnel Time Management IMG Rules for
Absence Counting Absence Catalog Absences Administration Group
Employee Subgroups for Time Quotas.Absence Counting (New)
IMG Absences Time Data Recording and Administration Personnel
Time Management Group Rules for Absence Counting (New) Absence
Counting Absence Catalog Personnel Subareas for Time Quotas
Time Personnel Time Management IMG Absence Absence Catalog
Absences Data Recording and Administration Define Rules for Rounding
Counted Rules for Absence Counting (New) Counting Absences
Time Data Recording and Personnel Time Management IMG Rules for
Absence Counting Absence Catalog Absences Administration Define
Counting RulesAbsence Counting (New)
Personnel TimeIMG Absence Catalog Absences Time Data Recording and
Administration Management Define Counting Rules Rules for Absence
Counting (New) Absence Counting Deduction rules for Absence quotas
Time Personnel Time Management IMG Absence Absence Catalog
Absences Data Recording and Administration Assign Counting Rules to
Absence Types.Counting
Personnel TimeIMG Attendances/Actual Working Time Data Recording and
Administration Management Define Attendance Types.Times
Time Personnel Time Management IMG Attendances/Actual Working
Times Data Recording and Administration Assign Counting Rules for
Attendance counting (New) Attendance counting Rules to Attendance
Types.
Time Data Personnel Time Management IMG Managing Time Accounts Using
Attendance/AbsenceRecording and Administration Define Absence Quota
Types. Time Quota Types Quotas
PersonnelIMG Managing Time Time Data Recording and Administration
Time Management Calculating Absence Entitlements Accounts Using
Attendance/Absence Quotas Permit Quota Generation Without
TimeAutomatic Accrual of Absence Quotas Evaluation.
Time Time Evaluation Personnel Time Management IMG Set Personnel
Subarea Groupings for Time Recording.Evaluation Settings
PersIMG Time Data Recording and Administration onnel Time
Management Calculating AbsenceManaging Time Accounts Using
Attendance/Absence Quotas Set Base Entitlements Rules for
Generating Absence Quotas Entitlements Base Entitlement for Absence
Quota Generation.
Personnel TimeIMG Managing Time Accounts Time Data Recording and
Administration Management Rules for Calculating Absence Entitlements
Using Attendance/Absence Quotas Determine Validity and Deduction
Periods.Generating Absence Quotas
IMG Managing Time Data Recording and Administration Personnel Time
Management Calculating Absence EntitlementsTime Accounts Using
Attendance/Absence Quotas Define Set Base Entitlements Rules for
Generating Absence Quotas Generation Rules for Quota Selection.
Define Public Holiday Work Schedules Personnel Time Management IMG Classes
Personnel Work Schedules Personnel Time Management IMG Group
Personnel Subareas for the Work ScheduleSubarea Groupings
IMG Group Personnel Subarea Groupings Work Schedules Personnel
Time Management Personnel Subareas for theDaily Work Schedule
Daily Work Schedules Work Schedules Personnel Time Management
IMG Define Daily Work Schedules
Work Personnel Time Management IMG Define Period Work Schedules.
Period Work Schedules Schedules
IMG Define Day Day Types Work Schedules Personnel Time Management Types.
Day Types Work Schedules Personnel Time Management IMG Define Day Types.
Day Work Schedules Personnel Time Management IMG Define Special Days.Types
Work Personnel Time Management IMG Define Employee Subgroup Work
Schedule Rules and Work Schedules Schedules Groupings
Work Work Schedules Personnel Time Management IMG Define Groupings
for the Public HolidaySchedule Rules and Work Schedules Calendar.
Work Work Schedules Personnel Time Management IMG Set Work
Schedule Rules and WorkSchedule Rules and Work Schedules Schedules.
Work Work Schedules Personnel Time Management IMG Generate Work
Schedules ManuallySchedule Rules and Work Schedules
IMG Set Planned Working Time Work Schedules Personnel Time
Management Default Value for the Work Schedule.
Personnel Time Management IMG Set Default Value for Time
Management Planned Working Time Work Schedules Status.
Time Data Recording and Personnel Time Management IMG Define
Personnel Subareas for Substitution Substitutions Administration
Types.
Time Data Recording and Personnel Time Management IMG Set Defaults
for Substitution Types. Substitutions Administration
IMG Absences Time Data Recording and Administration Personnel Time
Management Group Personnel Subareas for Attendances and Absence
Catalog Absences.
Time Data Recording and Personnel Time Management IMG Define Absence
Types. Absence Catalog Absences Administration
IMG Absences Time Data Recording and Administration Personnel
Time Management Define Counting Classes for the Period Work Absence
Counting Absence Catalog Schedule.
Time Data Recording and Personnel Time Management IMG Rules for
Absence Counting Absence Catalog Absences Administration Group
Employee Subgroups for Time Quotas.Absence Counting (New)
IMG Absences Time Data Recording and Administration Personnel
Time Management Group Rules for Absence Counting (New) Absence
Counting Absence Catalog Personnel Subareas for Time Quotas
Time Personnel Time Management IMG Absence Absence Catalog
Absences Data Recording and Administration Define Rules for Rounding
Counted Rules for Absence Counting (New) Counting Absences
Time Data Recording and Personnel Time Management IMG Rules for
Absence Counting Absence Catalog Absences Administration Define
Counting RulesAbsence Counting (New)
Personnel TimeIMG Absence Catalog Absences Time Data Recording and
Administration Management Define Counting Rules Rules for Absence
Counting (New) Absence Counting Deduction rules for Absence quotas
Time Personnel Time Management IMG Absence Absence Catalog
Absences Data Recording and Administration Assign Counting Rules to
Absence Types.Counting
Personnel TimeIMG Attendances/Actual Working Time Data Recording and
Administration Management Define Attendance Types.Times
Time Personnel Time Management IMG Attendances/Actual Working
Times Data Recording and Administration Assign Counting Rules for
Attendance counting (New) Attendance counting Rules to Attendance
Types.
Time Data Personnel Time Management IMG Managing Time Accounts Using
Attendance/AbsenceRecording and Administration Define Absence Quota
Types. Time Quota Types Quotas
PersonnelIMG Managing Time Time Data Recording and Administration
Time Management Calculating Absence Entitlements Accounts Using
Attendance/Absence Quotas Permit Quota Generation Without
TimeAutomatic Accrual of Absence Quotas Evaluation.
Time Time Evaluation Personnel Time Management IMG Set Personnel
Subarea Groupings for Time Recording.Evaluation Settings
Time Data Recording and Administration Personnel Time Management
IMG Managing Calculating AbsenceTime Accounts Using
Attendance/Absence Quotas Set Base Entitlements Rules for
Generating Absence Quotas Entitlements Base Entitlement for Absence
Quota Generation.
Personnel TimeIMG Managing Time Accounts Time Data Recording and
Administration Management Rules for Calculating Absence Entitlements
Using Attendance/Absence Quotas Determine Validity and Deduction
Periods.Generating Absence Quotas
IMG Managing Time Data Recording and Administration Personnel Time
Management Calculating Absence EntitlementsTime Accounts Using
Attendance/Absence Quotas Define Set Base Entitlements Rules for
Generating Absence Quotas Generation Rules for Quota Selection.
Still have doubts defnately i willl do the need ful -
hi gurus,
can any one send me the screen shots for testing.who will do Testing ? is the endusers or the business analyst .pls explain clearly
thanks in advanceHi Srikar,
In BW, we can do the following testing.
1. technical testing
2. functional testing
technical testing is done by the Business analyst and functional testing is done by the bw functional consultants. End users will not do any testing.
Hope it helps.
Thanks,
Vachan -
Multi-folio iPhone Screen Shots for itunesconnect..
Hello everyone,
I am getting ready to replace my SE app with a Multi-Folio app, for the iPhone do I need to add screen shots for each device, 4.7", 5.5", 4" and 3.5"? Thanks.Yes, in iTunes Connect you need to upload the required screen shots. In App Builder, you need to specify additional app icons and splash images. See this page for App Builder requirements: Digital Publishing Suite Help | Checklists for custom viewer apps
Maybe you are looking for
-
Error 1935 while installing Adobe Acrobat XI Pro/Std - Windows
Hi, This seems to be an issue with the Windows Modules Installer service.Please try the below steps and check if that works: Go to Control Panel > Administrative Tools > Services. Double Click on the Windows Modules Installer Service, it will open th
-
LaCie d2 195 GB USB hard drive and new iMac
Has anybody had a problem with a LaCie d2 drive that is connected via USB instead of FireWire? I have both types of external hard drives; the FireWire connected LaCie has worked flawlessly, as has a Seagate 300GB FireWire drive. But my poor little La
-
Filter by selecting keywords from the keyword panel, AND-rule
Hello, I'd like to have an option to use the AND-rule when selecting multiple keywords from the keyword panel. For example, if I had the following keyword hierarchy: - Places - London - New York - Subjects - Car - Buildings Now, if I'd like to see ca
-
Hi, I am getting below error while dropping undo tablespace . SQL> drop tablespace UNDO_TBS including contents; drop tablespace UNDO_TBS including contents ERROR at line 1: ORA-01548: active rollback segment '_SYSSMU4_1228296233$' found, terminate dr
-
Changing font colour on outgoing email
How do I change the default colour on outgoing email as a default setting. I have changed it at preferences as stated in the help section but it remains black. Do I have to use outlook in order to do something so simple!