Screen shot on iPad

How to make a screenshot on an iPad

Hold down the sleep and home keys for just a second....like you'd do the shutter on a camera. You'll see a little white flash and hear a clicking sound. Then the screen shot should be in your photos app.

Similar Messages

  • Any way to capture a screen shot on iPad?

    Anyone know if there's a way to capture a screen shot on iPad?
    Like the Print Screen button on a PC.

    Try this
    http://www.simplehelp.net/2010/04/03/how-to-take-a-screenshot-of-your-ipad/

  • Screen shots with ipad air

    Hi, how do I take screen shots on the ipad air? I seem to be shutting my ipad down when I try holding the off switch and the home key.

    Tap the On/Off button, then quickly tap the home button. You don't need to hold the buttons for longer than ~1 second. The captured photo will be in your camera roll.

  • Screen shots with ipad camera

    how do I take a screen shot using my ipad camera?  I read in the WSJ that you hold down the home and on/off keys, but when I do that  I just get the hard shut down screen.  Am i doing something wrong?  thanks!

    No, same process works on all iOS devices. You must be doing something not quite right.
    Whilst holding the Home button (the one on the front of the device below the screen) just tap the on/off switch. That's all there is to it. You must make sure you are holding the Home button before tapping the on/off switch.

  • Can't screen shot on iPad anymore

    Good afternoon,
    I have different issues following my version update to 6.0. One of them is that I can't screen shot on my iPad2 anymorewhereas the feature worked perfectly well before update.
    Can anyone help me ?
    Thanks in advance for your answers and best regards
    Jerome

    Screenshot works fine for me in iOS 6.
    Have you tried restarting or resetting your iPad?
    Restart iPad: Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, press and hold the Sleep/Wake until the Apple logo appears.
    Reset iPad: Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Ignore the "Slide to power off".

  • How to take screen shots on iPad 2 with iOS7

    Pressing Sleep/wake and Home no longer works on the iPad.  It;s OK on an iPhone4s

    Ah - good catch.  It's the sleep/wake button that's seems to have died since I updated.  (I took screen caps before updating to 7.0.)

  • Screen Shot with Ipad

    For some reason I am unable to "screenshot" from Ipad, when I hold down home and on/off key, it shuts off my IPad, is there a setting I have to change??? Also have the same issue on my IPhone.
    thanks any advice or tricks would be greatly appreicated.

    You may need to calibrate Home Button
    1. Open a stock application like Calendar, Weather or Youtube
    2. Hold down the power button until the "slide to power off" control appears
    3. As soon as you see it, press the Home button and keep it pressed until the red slider disappears and the app is forced quit to the Home menu

  • How to take screen shot iPad mini

    How do I take a screen shot with iPad mini?

    Simultaneously press the Sleep and Home button. You will notice an on-screen flash. If you have sound enabled, you will hear a camera click.
    The screen shot is stored in Camera Roll.

  • Is there any way to crop part of  a screen shot and paste into Pages?

    Instead of importing an entire photo into Pages, I am trying to:
    -take a screen shot of iPad documentation
    - open in photo roll and crop a section out of it
    - paste into Pages
    Is there an App that might crop and paste into Pages?
    Thanks for any help.
    Prea

    You can do that with PhotoPad. You take a screen shot, crop it in PhotoPad and it is saved to Saved Phototos. Then you just go the Media section and import the croped photo.

  • How do I take screen shots with the new update iOS 5 on my iPad and iPhone?

    When I try to take screen shots on both my iPad and iPhone they both come up with the screen to shut down the devices. I've updated both with iOS 5. Any clues on how to take a screen shot with iOS 5?

    As with the previous iOS versions.
    Press and hold the Home button and use the on/off or sleep/wake button as a camera shutter button for the screen shot.
    Or while pressing and holding the on/off or sleep/wake button before the slide to power of appears, use the Home button as a camera shutter button - this must be done before the slide to power off appears.

  • Ipad 2 screen is black . when i press the power button it takes a screen shot but i have no functionality . tried holding the home and power button together but the screen just flicker and stay black . no apple icon shows up. help please

    ipad 2 screen is black . when i press the power button it takes a screen shot but i have no functionality . tried holding the home and power button together but the screen just flicker and stay black . no apple icon shows up. help please

    Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
    If you can't update or restore your iOS device

  • How can I take a screen shot on the iPad Air and keep the resolution at 2048 x 1536. For some reason when I'm in an app it reduces the resolution

    How can I take a screen shot on the iPad Air and keep the resolution at 2048 x 1536. For some reason when I'm in an app it reduces the resolution

    Tatanka11 wrote:
    I'm new to Mac,...
    Then...  You may find these Links of Interest and Value...
    Show me how to set up my Mac.
    http://www.apple.com/support/mac101/
    http://www.apple.com/support/switch101/     Switching from PC
    http://www.apple.com/findouthow/mac/
    Enjoy your Mac...

  • IPhoto won't export cropped iPad and iPhone screen shots

    I started a thread for this thinking it was affecting my whole iPhoto library, when I export a cropped image I get the original. I thought I'd solved it by rebuilding my library, then realized the issue was only manifesting with iPad screen shots. I tested it on iPhone screen shots too, same issue. Photos taken with any camera, even the iPad camera are fine, I can crop and export those. Any iOS screen shot refuses to export a cropped version. I tried all the different choices for "kind" in "export."
    Is this a new feature? You have to be sure to crop a screen shot on the iPad or iPhone before you sync to iPhoto?
    Barbara
    Mac mini 2011, Mavericks 10.9.2, iPhoto 9.5.1, iPad Air iOS 7.0.6, iPhone 5S iOS 7.0.6

    What format is the external drive the Library sits on?
    Rather than trying to move libraries try repair the existing one:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • How To Save Screen Shot Photo From iPAD to JPEG FORMAT

    How To Save Screen Shot Photo From iPAD to JPEG FORMAT

    The "iPad format" is PNG (which is better quality than JPEG).
    There is no way to choose JPEG at the moment of taking the screen shot. You will need to convert the file using conversion software, probably on your computer. Google "convert PNG to JPEG".

  • How can I capture screen video (as opposed to just a screen shot) from my iPad?

    How can I capture a video shot of my iPad 2 (as opposed to a still screen shot)?

    Thanks so much for your reply. How would I go about mirroring the ipad screen onto my laptop? If I could do that, then I would think I could use Camtasia to get the video shot. I know I can use and hdmi conncetion to get the ipad screen to show on my TV but I'm not sure how to do it on my computer since it doesn't have an hdmi connection.

Maybe you are looking for

  • How to load a data file? help!

    I am developing a bean for JSF and JSP. my directory is like this WEB-INF classes wol woldss.class /data hh.txt in woldss.java, i would like to load hh.txt file. my code: private String fname= "/data/hh.txt"; URL url = this.getClass().getResource(fna

  • Unexplained exchange rate difference

    We have created a delivery plan in USD (our local currency is EUR) without fixing exchange rate. This plan has a received several GR and IV at different rates. The material is valuated at standar value. D.Plan: Rate A , price 15,96 USD/UN month 1 - G

  • Recording Audio from additional sources:  Why doesn't the "Audio File" show

    Hi, when recording audio from another source and saving: where does logic store the file? Shouldn't it be in the "audio' folder or the set path you set it to>? For some reason after we record the "Audio File" we recorded is not to be found in the "Au

  • 24" iMac backlight problem

    I've had my 24" imac for about 6 months. This morning when I switched it on the lower half of the backlight has not switched on (so the screen is dim at the bottom, and bright at the top). If I put the computer to 'sleep', when I wake it, the bottom

  • Infoobject Specific Properties

    Hi All, I'm trying to create a multiprovider based on an IfoCube which has the characterics with navigational attributes but when i select that infocube for the multiprovider then cube doesnt show those 2 charactericstics and the navigational attribu