Screen Shots in presentation

I am attempting to create a captivate presentation that
simply records simple screen shots rather than software simulation
and I cannot seem to do so. Is there an easy way to accomplish
this?

Hi bankhelp and welcome to our community
When you begin the process of recording, you have a dialog
you interact with that contains a Button labeled Options... If you
click this button, you may select from many different settings to
customize the way you record. It would appear that you really don't
want any of the Demonstration or Simulation options. So I'd suggest
clicking Options > Recording Options... and from the Recording
Options tab, click the Edit settings... button. Once there, simply
DE-select all the options on the dialog and record that way to see
if it gets what you want.
Cheers... Rick

Similar Messages

Not correctly printing cropped screen shots in Word documents

I have a C4480 All-in-one that works fine except for one really annoying thing. I create documents using Microsoft Word that use PC screen shots inserted into the document. I paste the screen shot into the document then use the Word cropping tool to crop the view of the screen shot.
Looking at the print preview of the document, everything looks great - but when I print it, the cropping of the screen shot has changed!
Anyone have any ideas on what's happening?

The distortion was slightly visible in the JPG images in the
WYSIWYG but the SnagIt images looked fine. Both types were present
in the Word doc prior to importing and have always printed out fine
in Word. The images were not added after the import.
I know the original screen capture is fine. When I captured
the same screen in RoboScreenCapture, inserted it into my Word
document before importing - it printed out without any distortion.
SnagIt saves as a .png whereas the RH version saved it as a .gif. I
did resolve the JPG issue by saving those as GIFs. That's why I
thought maybe RH has a problem converting from one format to the
other.
Hope that helps you more!

Printing imported screen shots

I imported some Word documents into RH 7 which included some
general .jpg images and a screen shot taken in Snag It. When
printed output was created (doc & pdf formats), both the images
and the screen capture were a little distorted and did not print
out as clearly as in the original Word document. When I used the RH
Screen Capture utility to capture the images and the screen shot,
there was no distortion when printed. Is there a setting that can
be configured to prevent this distortion or idoes RH not play nice
when converting other file types?
Thanks!
A

The distortion was slightly visible in the JPG images in the
WYSIWYG but the SnagIt images looked fine. Both types were present
in the Word doc prior to importing and have always printed out fine
in Word. The images were not added after the import.
I know the original screen capture is fine. When I captured
the same screen in RoboScreenCapture, inserted it into my Word
document before importing - it printed out without any distortion.
SnagIt saves as a .png whereas the RH version saved it as a .gif. I
did resolve the JPG issue by saving those as GIFs. That's why I
thought maybe RH has a problem converting from one format to the
other.
Hope that helps you more!

Need screen shot documentation for mySAP CRM

Hi
all
Greetings,
I am looking for every ones help out here & need the screen shot documentation for the following;
1.Mysap crm Overview.
2.Base customization
3.Partner processing
4.pricing & actions
It would be really appreciated & i would be very greatfull to each one of you present here
My E-mail id: [email protected]

Hi
You can get all the config building blocks in the link below
http://help.sap.com/bp_crmv250/CRM_DE/index.htm
Links to CRM Documentation
http://help.sap.com/saphelp_crm50/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
Do reward points if helpful
Regards
Dinaker vikas

Best practices for importing .png screen shots into FrameMaker 9?

I'm new to importing .png screen shots into FrameMaker, and also new to FrameMaker 9. To compound things, I have engineers giving me screen shots taken on Linux machines, using a client like NX to get to Linux. My screen shots are coming in fuzzy and instead of trying to troubleshoot what's going wrong here, I was wondering if someone could quickly tell me what normally works with FrameMaker 9 and .png on a Windows system so I can troubleshoot from there.
That is, let's say I'm capturing a screen shot on a Windows system and I use some tool (Paint Shop Pro X, SnagIt, Alt-PrintScreen, or whatever). I save the screen shot as .png and then import by reference into FrameMaker 9.
What dpi do I use in the capturing program?
What dpi do I use when I import by reference into FM?
What if that makes the screen shot too large/too small: Is it better to use the FrameMaker Graphics > Scale solution, to resize it in my capture program, or to retake the screen shot?

Bringing screenshots into Frame documents has four major considerations:
how to perform the original screen capture
how to post-process it in a graphics editor
what graphical object model (and file format) to store it in
making sure it isn't damaged by your workflow
1. Screen Cap, typically of dialog boxes ...
... used to be simple; isn't anymore.
Dialogs used to have identical pixel dimensions on all user screens. You hit Alt[PrntScrn] in Windows and you got a one pixel per pixel 24-bit color image on the clipboard.
More recent operating systems now have much more scalability in the GUI. So either capture at what the default user sees, or at the optimal presentation enlargement, which might be precisely 2x the default display.
2. Post
Before you even start this step, you need to know exactly how you will be presenting the final document out of Frame:
B&W? Color?
What dimensional size on the page?
If hardcopy, what are the optimal parameters of graphical images for your print process? If web or PDF, various other considerations arise. I'll presume print.
In our workflow, the print engine is 600 dpi bitmap. We normally present images at one column width, about 3.5in. Our PDF workflow passes 600 bitmap untouched, but resamples gray and color to 200 dpi. I tend to use 600 dithered bitmap, but always test if there's any doubt.
Chances are the screencap bitmap, at your native printing res, is too small. There is no "dpi" associated with clipboard images. Once pasted into an image editor, the editor should provide the ability to declare the dpi (Photoshop does, both at paste, and via "resize without rescale"). If your image editor doesn't, fire it. If you can't see and control dpi, you have no real control over this workflow.
Plan to save the final image in a format that at least supports linear dimensions (like EPS) if not explicit dpi (TIFF). Save out the image at the exact size you intend to use at import in Frame. Do you know how Frame scales objects? I don't. So do your scaling where you have control over how.
Play with the defined "dpi" until the linear dimensions match your planned import frame. If that dpi passes through your workflow unmolested, you may not need to perform any resizing.
If you need to convert from 24-bit color to bitmap (at your printing resolution), I'd suggest using error diffused dithering converting to your target res, as this tends to preserve the hard edges in dialog boxes and rasterized text.
If you need to re-scale, I'd suggest scaling up by an integer multiple, using "nearest neighbor", to the nearest size just higher than your target dpi. Then rescale bi-linear down to your target size.
3. File Format
The main consideration here is compression, followed by color depth and size encoding.
Screenshots tend to have expanses of flat colors, and hard edges. These objects compress reasonably well using repeat-count compressions (like ZIP or RLE). They tend to get damaged by curve-matching compression, like JPEG, because they typically contain no curves through color space. Hard edges get fuzzy or pick up ringing artifacts.
So don't use JPEG (and what compression will your workflow use?). I tend to use TIFF(ZIP) for screenshots.
Avoid indexed color (4-bit, 8-bit or 15/16-bit) color.
Don't use GIF. It has no size encoding. The usual presumption is that GIF is 72 dpi, which makes importing it a nuisance, and at least a minor math exercise. Plus, it's indexed color, and may scale poorly downstream.
Experiment. See what looks optimal in the final product.
4. Workflow
As you can see throughout the above, all your careful planning can be for nought it your save-as-PDF, distiller or print shop process resamples everything down to 90 dpi. You have to know what's happening, and how to optimize for it, or you probably won't like the result.
We once had graphics showing up at 10 (yes ten) dpi in print.
Turned out the print engine could handle JPEG 5 but not JPEG 2000.
We had to hastily back-port images until a software upgrade fixed it.

I have Adobe X1 ver 11.0.7 installed on my iMac, when I download a .pdf and try to print it the printer preview is blank, only way is to take screen shots, is this me or an Adobe issue?

On my iMac OS-X 10.9.3 I am able to view a downloaded .pdf in my browser , if however I want to print out the .pdf via the File tab and Print in Safari, the message comes up that Adobe either does not support this format, or it s corrupted as an attachment to an email. I have tried saving it to my desktop by exporting it as a .pdf, or saving it to the desktop. In both cases when I try to open it, I get the same message.
Found that the only way I can save the data is to take a screen shot to my desktop and then I can print it out, but cripes what a pain!
Any suggestions would be welcome, is this me or an Adobe issue?

If you are printing to physical printer from Safari : Use Reader print button from Reader toolbar
If you want to save a PDF from Safari to your local : Use Reader Save button from the Reader toolbar.
PS: if you have PDF in read mode the hover the mouse at the bottom of the page and the floating Reader toolbar will appear.
Please let me know if this solves your issue.

Screen shots are not getting saved in the desktop

Hi,
Unable to capture some screen shots. I am getting the sound of camera-clicks, but not finding them in the desktop. Searched in the finder to locate, whether these are gettiing saved in any other locations, but didn't find. Followed some of the instructions in discussion forum, unsuccessfully.
Kindly help.

Hi..
Try this thread > https://discussions.apple.com/thread/1755293?tstart=0

How to take a screen shot automatically and from a remote location

Hi,
I have a Desktop, a Video Analyzer with Windows XP, and a Laptop, also running Windows XP. What I would like to do is take a screen shot from the Video Analyzer while running the LabVIEW VI from my laptop.
I have found this, which gives me insight into the complexity of a print screen call, but this is really only if LabVIEW were running on the system from which my screen shot is desired. For this post, that is not the case.
If you have a solution or even just a vague idea or comment, please do not hesitate to post. I appreciate any and all feedback on this topic.
Thank you for your time.
Jake Brinkmann
Electrical Engineering Intern

Thank you for your response. I would like to aviod using outside software in this. I'm sure that TightVNC is great, and it would probably work. I would, however, just like to do this using labview and labview only. Maybe it isn't possible but I really would like to do it entirely in labview. If anyone has any suggestions, I would love to hear them even if they, too, have outside software involved.
Thanks again Joseph

How do I take a screen shot with my iphone 5S?

How do I take a screen shot with my iphone 5S?

Press the "Home" button and the sleep/wake button at the same time to take a screen shot.

How do I take a screen shot on my mac?

What is the command for taking a screen shot on a mac?

I use shift/applekey/4 (all at the same time) then I get a little indicator on the screen and can copy as much of the screen as I want. Somewhere I found where I could get it to go onto my screen as a jpeg--titled picture1-picture 2 or whatever.

HT4759 We are going around in circles - iCloud says my Apple ID is valid, but is NOT an iCloud ID and will NOT help me create an iCloud ID. Here's the screen shot

Here is the screen shot: - OH, WELL, THAT'S JUST GREAT!! IT WON'T ACCEPT A SCREENSHOT EITHER.

To enable iCloud on your Windows PC,
first set up iCloud on your other devices,
then install the iCloud Control Panel for Windows...
From Here...
http://www.apple.com/icloud/setup/pc.html
Apple ID and iCloud
http://support.apple.com/kb/HT4895

I have screen shots of the messages and what happens when I try to play games on Facebook since I updated Firefox. Issues I didn't have before the update. Where do I send them? How do I correct this?

The screen shots include the web address for both shots. One is for script error messages that keep interrupting EVERY game. Then after I stop the scrip, Adobe Flash crashes, and I have no control. I have to use the Windows Task Manager to gain access to my home page to get out.
This didn't happen until I updated the Firefox this last time. I've tried everything and nothing works to get rid of the problem.
I've been to your questions, etc and nothing I've found helps.
I use Windows XP
Four sites are the worst; I only play these 4 games on Facebook.
URL's of these are:
http://apps.facebook.com/wildwesttown/?ref=bookmarks&count=0&fb_source=bookmarks_apps&fb_bmpos=4_0
http://apps.facebook.com/aviator-game/?fb_source=canvas_bkmk_top
http://apps.facebook.com/gnometown/?fb_source=canvas_bkmk_top
http://apps.facebook.com/journeyofmoses/?fb_source=canvas_bkmk_top&count=1
(I got a script error message just getting the URL on this last one.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

How to delete photos from iPod after making screen shot?

Hello!
I just figured-out how to take screen shots with the ipod... And was playing with it for a while! heh heh
Now I have a bunch of screen shots saved to my ipod, is there a way to delete them with out connecting to iTunes?
Any tips are appreciated.

On a Mac, iPhoto launches automatically if there are Saved Photos. In Windows XP, there's a "new device" dialog where you can select the Scanner & Camera Wizard (no view files option in XP, unlike Vista), or you can go to My Computer and you'll see an Apple® iPod device (the only thing accessible will be the Saved Photos).
I think we've covered all the OSs now.
Hope this helps...

Please open this VI and screen shot for me.. thanks

Could any kind soul here, please open up this VI and post the screen-shot the block diagram here?
I need to look at the block diagram now but I do not have LV installed on my current computer.
It is a LV2010 vi.
Many thanks..
Attachments:
Crop#51e.vi ‏17 KB

Here it is.
Marc Dubois
HaroTek LLC
www.harotek.com

How can I get TV shows viewed through Hulu Plus on the Apple TV 3 to show as widescreen with black bands above and below the screen shot instead of chopping off the sides on my non-widescreen TV?

I just bought a new Apple TV 3 today so I can watch shows from Hulu Plus without having to physically plug in separate audio and video cables from my Macbook Air to the TV every time. I have a non-widescreen TV and when I normally watch Hulu Plus on the TV (though Safari on my plugged in Macbook Air as mentioned above), the entire wide screen shot is shown with black bands above and below the sceen shot since I am watching a widescreen program on a non-widescreen TV.
However, I noticed that when I watch the same show through Hulu Plus on my new Apple TV 3, the left and right edges of the shot are chopped off to make the program fill my non-widescreen TV. This bothers me because I would like to see the full shot and not just the chopped off middle portion. This is a real bummber because watching Hulu Plus without having to plug in my laptop is the only reason I bought the Apple TV. Is there anything I can do about this?
Thanks!
(FYI: I have the very first Macbook Air that is not capable of mirroring)

How are you actually connected to the TV? Does it have HDMI? Most non-widescreen TVs would not.
I would suspect a converter is either not outputting properly, your TV not interpreting the signal properly or you have some form of Zoom setting enabled on the TV.
How does your TV handle widescreen from say cable or terrestrial TV sources ?
Unfortunately AppleTV is not designed to be used with non-widescreen TVs so there's no setting on AppleTV to tweak.
AC

Screen Shots in presentation

Similar Messages

Maybe you are looking for