Screen Shots not working correctly

When I click Shift + CMD + 4 and then Space, you can take screenshots of a window rather then the whole screen
The problem is that the screen shots are cut off when the window is taking up the whole screen
A picture of what I mean: http://grab.by/4Lq5
You can see that the right side is chopped off! Why? How can I fix this?

hmm, that's odd - if you do it manually selecting the whole screen, does that work?
I imagine that this terminal command will give the same undesirable result - but since it bypasses just a little of the GUI.... you might try it.
screencapture -iw ~/Desktop/screenshottest.png

Similar Messages

I bought an IPAD air from state and the screen is not working correctly and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

i bought an IPAD air (32 gb wifi only) from USA just one month ago and the screen is not working correctly(picture attached) and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

Have you tried a soft-reset to see if that fixes it ? You might be able to get warranty service in Egypt for your iPad, but the warranty includes :
IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
As it's wifi-only you should have a better chance of it being serviced under warranty, but there are no guarantees, it might depend upon the repairer.
Egypt authorised service providers : https://locate.apple.com/eg/en/

My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

Capture Screen Shot not working in Full Motion

I am trying to use Full Motion Recording to capture mouse
movement, while also manually capturing screen shots. The screen
shots are not being captured though. I've tried the default Print
Screen key, and also resetting it to the Down key, with no success.
I can capture the screen shots when Full Motion Recording is not
active.
The information in the Help files and Knowledgebase seem to
indicate that it's possible to manually capture screens while
recording full motion. Any suggestions about what could be going
wrong?
Thanks.

Hi LisaLouLou and welcome to our community
I think the help may be misleading you here. If you are
recording by using the total “Full Motion Capture”,
Captivate ignores the Print Screen key because you have told it
that the entire project is to be recorded using Full Motion. Hence,
there is no slide by slide based recording as there is using the
other options.
After you have recorded, you are free to insert blank slides,
then add images as needed in case that helps.
Cheers... Rick

Screen Flows Not Working Correctly

We are using OPM 10.2.
We decided to extensively use screen flows because we had a requirement wherein the user should be allowed to navigate back and forth on the OPA screens.
If we do not use screen flows the following screnario occurs..
We've a rule which is satisfied if all attributes on Screen1 Screen2 and Screen3 are known.
User enters details on Screen1 and Screen2, but he wants to navigate back from Screen3 to Screen1, he reaches Screen1 by hitting browser Back twice, but when he again hits
Submit on Screen1 he's directly navigated to Screen3 skipping Screen2. This is because all attributes on Screen2 had been collected in first iteration.
We used screen flows expecting that this would force the required screen order, but it is also behaving in similar way.
Does it have any thing to do with the way the rules are written.
Thanks In Advance.

Hi user1002818,
The reason that the screens aren't being displayed again is because then engine has the data which was collected on those screens - from a rules point of view there is no need to display them again. To enforce a particular forward/backwards flow we have Interview Flows, which it sounds like you've already started to use.
One of the reasons that OWD doesn't support an OOTB 'back' button is because navigating backwards in a session has the possibility of invalidating data 'upstream' in the interview. e.g. I fill in some personal details on one screen, on screen 2 I say that I have children, and on screen 3 I create children instances. When I navigate back and change my previous answer to 'I do not have children' what happens to the children instances which I've created? Semantically my session is now invalid. It's a choice left up to the customer/project as to how they want to manage their session validity (delete the data, show the data and ask the customer if it's valid or just do nothing).
One way to achieve what you want to do would be to author rules as normal and manage the screen flows via a simple push/pop stack implementation which keeps track of screen submissions and data entered on those screens. This will give you the flexibility to both delete invalid data or display it to the user again as you wish
Could you tell me which project it is that you're working on at the moment please? I'm working on large UK project at the moment and the OPA team is providing support to achieve something very similar.

Screen shots not working

When I try to take a screenshot (Command + Shift + 3/4) I get the camera sound, but a file is never created on my desktop. I have searched my drive and can't see that these images are going anywhere. Any ideas? It worked before, just happened 2 days ago.

Try running the repair disk option from your install disc. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
When done, click Repair Permissions
Restart your computer when done.
Try the screenshot commands.

LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly

Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
Anybody know of a way round this?

Hi @dnhowes ,
I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Was it the Nvram reset back to factory settings that you tried or a hard reset?
Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
I find that on the Lab printers when I am selecting different menus.
If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Screen Not Working Correctly- Horizontal Lines

For the past few weeks, when I open my computer, sometimes the bottom half of my screen is just a lot of lines or is not working correctly. Sometimes if I tilt the screen enough, it will go away. But I don't know what to do!

First step in user troubleshooting is to turn the phone off and back on. If that doesn't help, then a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will restart. If this does not solve it, then a restore from backup, and finally if necessary, a restore as a new device.
You do not indicate what iPhone version you have. You also do not say if the phone has been dropped or any user damage to the screen. If anything, you can make an appointment with the Apple Store Genius bar to get the hardware checked.

My phone was left in a car overnight and now is not working correctly, screen looks funny and I cannot make calls? Will they be able to assist in a store?

My phone was left in a car overnight and now is not working correctly, screen looks funny and I cannot make calls? Will they be able to assist in a store?

Make an appointment at any Apple store, see what the genius bar says/does.
You don't metion whether the car was hot or cold.

Hi my name is Aditya. i am using ipad 2. 2 days ago my ipad fall down from my hand and now its screen is not working it is totally blank but shocking thing is that when i take a screen shot the display came back for 2-3 second. any one like me?

hi my name is Aditya. i am using ipad 2. 2 days ago my ipad fall down from my hand and now its screen is not working it is totally blank but shocking thing is that when i take a screen shot the display came back for 2-3 second. dose ne 1 have same problem....?

Anyone have any suggestions? or is everyone else just as clueless as me !

My touch screen on my iPhone is not working correctly. I touch one part of the screen and another part responds. Is the there any way to solve this problem?

My touch screen screen is not working properly. I touch one App or icon and an different App/icon opens. It is an ultra sensitive touch screen, any idea on how to solve this issue?

Yes! Stop using the charger! My husband noticed it was worse when plugged in. One apple guy told me "restore" ... I did all that and it did not help. After I stopped using the charger, it stopped messing up. I used my husband's charger and all is well.
Later, an apple employee told me to bring in the charger for a trade in, because they had a recall on some of them.
I haven't traded it yet, but I plan on it.
Good luck! Let me know!

1st Gen iPod touch not working correctly?

I have a 1st generation 8GB iPod Touch. It's not working correctly.
My biggest problem is that, unexplaiably, certain areas of the screen don't seem to register touch anymore. There is a sort of "L" shape on the left and bottom edges of the screen that won't register touch, making it impossible to move applications to the previous page on the home screen and making it hard to use the keyboard/buttons while in portrait mode. It's extremely frustrating to try to change the volume while playing a song, as I now have to either put the iPod in sleep mode then double tap the home button or flip it to cover flow and double tap the home button to do it.
http://i38.photobucket.com/albums/e140/Vipershark/IMG_0001.png
(Highlight the image to see it better.)
This is a screenshot of the working/non-working areas that I made using the Whiteboard application. The white area that you see (excluding the little half circles of black which are extended brush strokes and not actually working areas) is the area that doesn't work. I can't seem to figure out why it happened, as I've never dropped or otherwise damaged it. It just happened one day, and I don't know why.
But I can't fix it. I've tried everything. Upgrading (I'm now running iPhone OS 3.0 which still didn't fix the problem.) didn't work, restoring didn't work, deleting everything and restoring from factory settings didn't work.
I'm also having a few other problems as well, though they're not as bad. My home button seems to stop working sometimes and sometimes the entire screen witll stop registering touch until I put the iPod to sleep and turn it back on. It also seems to go a lot slower than usual.
My iPod is less than a year old. Can you help?

Vipershark,
I had a very similar problem this past weekend with my 1G 8GB iPod touch. But with me, just the left side of the screen wasn't registering my touch. I could still access the bottom section, which you cannot.
The good news for me is that I fixed it and I hope it works for you as well. What fixed it for me was resetting all my settings. To do this, go to the settings icon, then click on general, and then on the very bottom is reset. Choose "reset all settings."
Apparently this is different than a restore through iTunes, which you tried. I also tried that earlier and it did not help.
Of course, the reset solution I used relies on you being able to access all of the correct buttons, so I hope you can!
Please let us know if this works for you. If not, since it is less than a year old, it is still under warranty. Contact Apple and see what they can do.

Function keys are not working correctly

I've been looking all over the various threads and I can't find an answer that solves my problem.
Here are the details:
I bought the computer in the U.S. where I live.
I have a iMac 2.4GHz intel Core 2 Duo EMC 2133 with a 20" screen. Bought it new in February 2008.
I have Mac OS X 10.5.8 (I am waiting for my order for OS Snow Leopard to come in!!)
I have been using a wireless mouse and Keyboard (Love not having cords!)
Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
Here are the problems:
Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows.
Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
A couple more important or interesting facts:
Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
I have restarted the computer.
One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!

Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly

My pc has a virus I just downloaded song from pc to kids ipods now both ipods are not working correctly could the virus be in the ipods, if not why are both not working doing the same thing right after unplugging from pc.

Can an ipod get a virus from a pc that has a virus. After connecting two different ipods to my pc to download music they both are not working correctly, could the virus have transferred to the ipod, if not why would both ipods not work and be doing the same thing? When trying to click on a game it just stays on the main screen.

- I have not heard of a virus that can cause problem with an iDvice that has not been jailbroken.
- Try resetting the iPods. nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Do you hve problems with one game? The same game on both iPods?
Other apps?

HT201406 my ipad touch screen is not working please give solution for it.

my ipad touch screen is not working please give solution for it.
i have connected ipad to itunes and done it restore seetings then also my touch is not working but
when i connected ipad to i tunes inside functions are working properly but touch screen is not working what can i do

If you have a screen protector on the iPad's screen, try removing it. If you don't or that doesn't help, and restoring the iPad to factory settings has not corrected the problem, then the iPad probably has a hardware problem and will need to be taken or sent to Apple for replacement.
Regards.

Screen Shots not working correctly

Similar Messages

Maybe you are looking for