Screen shrinks; Remote server error message

When Users other than me log on they get an error message after a few minutes. The screen shrinks to the upper left hand corner and red text appears in the center of the screen: "Unable to connect to remote server. Please ensure main computer is running and within the same local area network. Click to continue". I cannot figure out where this message is coming from. I do not connect to any remote servers, I have sharing off, and firewalls on. It only occurs for my non-administrator users.
Any ideas what is triggering this message?

I would suggest a complete reinstallation of the software. First uninstall the software using windows uninstaller and then comfirm if the folder c:\Program Files (x86)\Adobe\Photoshop Elements 5\ or c:\Program Files\Adobe\Photoshop Elements 5 whichever applicable has been deleted.  After this, install the PSE again

Similar Messages

  • "Could not locate remote server" Error Message

    I had to reinstall Adobe Photoshop Elements 5.0 after a virus destroyed my system.  Now, when I open Editor (from "Full Edit" in Organizer), I get the following error message:
    "Could not locate remote server
    http:///???%12?%C3%AF???????????????%12?%12?g"
    This problem did not exist before the reinstall.  What can I do to stop this error message from being triggered?
    Thanks!

    I would suggest a complete reinstallation of the software. First uninstall the software using windows uninstaller and then comfirm if the folder c:\Program Files (x86)\Adobe\Photoshop Elements 5\ or c:\Program Files\Adobe\Photoshop Elements 5 whichever applicable has been deleted.  After this, install the PSE again

  • "Unable to connect to the remote server" error message (ID 6102) in event view after installing MOSS 2007

     Hi brothers,
    After installed the Moss 2007(basic) , I find some error in event view. The event ID is "6102". More detail information is shown below.
     Event Type:        Error
    Event Source:    Office SharePoint Server
    Event Category:                Launcher Service Event ID:              6102Date:                     11/27/2007Time:                     8:22:17 AMUser:                     N/AComputer:          MOSS-001Description:LoadBalancer.RegisterLauncher failed:  Unable to connect to the remote server For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 
    Please help me, thanks.

    Hi,
    i think this has to do with the "Document Conversions Load Balancer Service".
    If you don't need the service than try to stop it:
    Start Central Administration > Operations > Services and stop the service.
    or 
    If you need it the service, try this:
    Start Central Administration > Operations > Service Account
    Change the service account to "Document Conversions Load Balancer Service" And Select a "Network Services" Click Save
    Hope this helps!
    Cheers,
    Daniel Bugday
    Web:
    SharePoint Forum
    Blog:
    Daniel Bugday's SharePoint Blog

  • Can't even get a server error message, much less upgrade to iOS5?

    About a week after iOS 5 was released in mind-October, my inability to get the upgrade onto my 3GS led me to messaages like "It's a rolling upgrade; Apple's servers are catching up. Try again later." Every time I plugged my iPhone into my PC, iTunes launched, synched and brought up the Store. Nothing on the screen said anything about downloading iOS 5. More Googling yielded messages from people who followed the same procedure, but evidently found a download link or something like that, because they had launched the upgrade procedure but then gotten a server error message. Meanwhile I was still getting nothing. I tried re-installing iTunes. Rebooting my PC. Yet, here it is November and each time I plug my iPhone into the PC, it's the same dead end. iTunes launches, synchs with the phone, and then shows me all the latest groovy hits I can download. Absolutely nothing about the iOS 5 upgrade steps, contrary to Apple's messages saying "Just plug in your iPhone and iTunes will do the rest."  Maybe there's a secret password?

    I'll answer my own question for the benefit of anyone with similar symptoms who searches the forum. Today just for grins, instead of letting the step of plugging the iPhone 3GS into the PC launch iTunes, I launched iTunes first then plugged in the phone. THAT succeeded in bringing up a dialog box that got me started on the road to the iOS 5 upgrade. One more thing: One of the steps that no one mentions is that once your iPhone is plugged into the PC and shows up in iTunes, click once on the topmost list of items representing your iPhone. That will take you to your iPhone "home page." There's an update button in the center of the home page screen that you'll use. It's pretty quick; only took about 30 minutes on my basic DSL connection. Have fun!

  • My movies are giving a URL not found on server error message, last week they worked fine. After deleting one of them, I don't get any retries for a free download. How do I contact the seller to complain?

    My movies are giving a URL not found on server error message, last week they worked fine. After deleting one of them, I don't get any retries for a free download. How do I contact the seller to complain? Obviously the one of the other movies first..

    Stan -
    Thanks again for the simple but valuable tip.
    I'm just going to repeat the relevant sections from my previous post with the screenshots this time:
    Below you'll see a snip of how my current folder structure appears. It's identical to yours, except there are no button files in the General Folder. Since you were kind enough to include a file name, I did a search on that specific one and it's nowhere to be found on my hard drive. Hmmm....
    I've seen others remark on how... "challenging".... Adobe's instructions can be sometime. I'll admit to having the same feeling when I was trying to download and install all the content files and the 7-zip stuff. Is the answer somehow that I screwed up that?  Note the 7-zip folder right above the Adobe folder. Here's a screen shot of that expanded folder contents:
    Does that look like you think it should? Have I not installed or extracted something correctly?
    Finally, the only other thing I can think of to give you as much info as you might need is to include a screenshot of where the "Functional Content" stuff got saved. Adobe's instructions about this (if I recall correctly) were that it did NOT have to be installed anywhere specific, but you then had to go into Encore (& Premiere) and through preferences point to this stuff, which I believe I did. But I don't see any button type files in these anyway.
    Other thoughts or advice?
    Thanks!

  • I have a problem syncing iCal on my Macbook air (10.7.5) and my iPhone 4s (5.1.1) over iCloud. The following server error message comes up "The request (CalDAVAccountRefreshQueueableOperation) for account "iCloud" failed." Been to Apple - no luck. Ideas?

    I have a problem syncing iCal on my Macbook air (10.7.5) and my iPhone 4s (5.1.1) over iCloud. The following server error message comes up "The request (CalDAVAccountRefreshQueueableOperation) for account “iCloud” failed." Been to Apple Store - no luck instore, or with Super genius over the phone when with genius in store, taking data in real time via ethernet!
    I had to do a full wipe of my system because of time machine back up issues 2 weeks ago, and the error has only occured at some point since then. I only did a drag and drop of my user account folders/files into an External HDD rather than a copy of my user account (advised by the staff in store at Apple to do this) and when reimported, the Mail folders are all present but each message is in a sub-sub-sub folder that is numerically named. I do not have a mirror image of the hard disk prior to the wipe, only a time machine back up from 2 weeks prior to it being done. I am uncertain if this reinstall has caused the issue. 
    I am not happy to upgrade the software in my iPhone until I have the calendars working. I have purchased Mountain Lion, but again am concerned about upgrading until the issues are sorted.
    I have tried the other solutions on here with no luck. HELP please.
    Many Thanks.

    Progress Update.
    I made a back of what existing phtos and Videos I had on my Iplhone.  I used Image capture to do this making an entire back up of photos and videoa that were still intact on the phone.
    Image capture is god for this purpose, as it does exactly what you ask it to do without applying any rules or squishing the files back into iphote (which might also be corupted) 
    Image capture wil do the basic function of retriving the contents of the phone and save them as native files on your hard drive.
    Once I did this I erased my iphone, and re intitialised it restoring an older back up from icloud.
    As the retore was happneing - I did retreive the missing files that cuased the intial beviour as above, and I could play the videos that were missing in the above scenerio.  The wierd ting was however that even though the source files were now back on the device, the thumbnail previews were missing. Where I ahd balck thumb nails for server portions of the resotred content.
    I then went to bed as the restore is a long process.  When I woke up the library had library had cleaned itself up.  Mysteriously the prcess had deleted the files missing the their thumbnails.
    This is very perculiar and bad behavior.
    I am now repeating the process, and will attempt to download the missing content as it is restored and prior to the phone trying to fix itself.
    Here are the lessons learned.
    DO NOT rely on Photo Stream to keep back ups and synchornise videos from you IOS device. IT DOES NOT SUPPORT THIS CAPBILITY
    DO NOT rely on iCloud Back Up alone - always fd an occassional iTunes back up or more reliably still always take a back up of photos and video files using Image Capture to be doubly sure that you a have backd up any content.
    DO THIS NOW - dont wait to loose your phone ofr have your phone repaired by replacement at the apple Store.  (I did both :-(

  • How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

    How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

    Screenshot of how it looks when i try to show a ms access form inside a iframe:
    http://oi58.tinypic.com/2vj4ish.jpg

  • I keep receiving a server error message with the new beta version of iMessage.  What can I do to fix this?

    I keep receiving a server error message with the new beta version of iMessage.  What can I do to fix this?

    Ok I have a question.
    Why do you want to use Beta software? Especially since you are having this problem with it?
    Uninstall it and forget about it until it is released as a real piece of software.

  • Server error message 504

    Why does my iCal icon keep jumping w/the error message Request for account "Yahoo" failed then server error message 504 and 502.  It happens about every 2 minutes! Help

    Greetings,
    This error suggest you have Yahoo Calendars added to your iCal and iCal is losing connection with the Yahoo servers.
    Things to try:
    1. First make an iCal backup:  Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
    2. Go to iCal > Preferences > Accounts -- Normally there is nothing here.  If you have anything in this window (specifically anything that says "Yahoo"), click on it and hit the minus sign "-" to remove it.
    --- Note: This will remove any calendars you have from the listed servers (like yahoo).  If you find that you actually need the calendars associated with the server you removed, hit the plus sign "+" to add the server back in.
    3. Quit iCal and then re-open and test.
    Hope that helps.

  • I frequently get the "Firefox can't find the server" error message.

    I frequently get the "Firefox can't find the server" error message. Refreshing the page normally causes the page to load, although sometimes it takes more than one try.
    I have checked my connection settings. IPv6 and DNS prefetching are disabled, as recommended by this article: https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can?s=Firefox+can%27t+find+the+server+at&r=1&as=s

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls

  • I'm trying  to download the monthly subscription versions of photoshop and lightroom, but I keep getting a server error message?  Any thoughts?

    Hey, I'm trying to download photoshop and lightroom for the subscription of $10 a month. but can't seem to get on the page for it. I keep getting a server error message, yet when I click the button to check their server it says everything is working fine.  Any ideas?

    Steveclack please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for information on how to resolve Error 207.

  • Server Error Message Translation

    I have problems with Translation of server error messages to French. I did the following.
    Install the french version of oracle client (oraf.msb file exists in oraclehome$\ora92\rdbms\mesg)
    Changed the language by using ALTER SESSION statement
    SQL> SELECT * FROM NLS_SESSION_PARAMETERS;
    PARAMETER VALUE
    NLS_LANGUAGE FRENCH
    NLS_TERRITORY FRANCE
    NLS_CURRENCY ¿
    NLS_ISO_CURRENCY FRANCE
    Set the NLS_LANG in the registry to FRENCH_FRANCE.WE8ISO8859P1
    SQL> select * from t;
    select * from t
    ERREUR à la ligne 1 :
    ORA-00942: table or view does not exist
    Please let me know why the error message STILL in English? I want to see
    ORA-00942: table ou vue inexistante
    Thanks.

    I've emailed the fissues mailbox with some details of my symptoms with this issue, including some collected data from the IE F12-DevTools/Network capture (in the hope it is helpful to diagnosis).
    I got this response:
    Hi Don,
    Thank you for contacting us.
    We have escalated the issue to the engineering team.
    We will let you know once we have updates from the team.
    Please let us know if you have any questions.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • How to enable the screen after triggering the error message

    Hi All,
    we have a tcode IW31, in that one field(WBS element -PROID) is not mandatory. so we have written the following code to make it mandatory in a user exit EXIT_SAPLCOIH_010.It's triggering the error message, but it is going into disable mode. Please sugget me how to enable the screen after getting the error message triggering.
    if not caufvd_imp-proid is initial.
      select single * from t350 into wa_t350
              where  auart    = caufvd_imp-auart
                and  imord    = 'X'.
      if sy-subrc is initial.
        pspel = caufvd_imp-proid.
      else.
        call function 'CONVERSION_EXIT_ABPSP_OUTPUT'
             exporting
                  input  = caufvd_imp-proid
             importing
                  output = l_posid.
        concatenate text-t10 l_posid text-t11
                    into l_textline1 separated by space.
        message i208(00) with l_textline1.
      endif.
    else.
      message e208(00) with 'Please maintain WBS element in Location Tab'.
    endif.
    Thanks

    Hi,
    Instead of error message use status message like
    message s208(00) with 'Please maintain WBS element in Location Tab'.
    Leave to screen sy-synnr.
    This will allow to move to the screen and have in enable mode.
    WIth Regards,
    Dwaraka.S
    Edited by: Dwarakanath Sankarayogi on Feb 13, 2009 7:46 AM

  • When I try to sign in I get a server error message

    iCloud on my PC:- When I try to sign in (for the first time) i get a server error message.
    Any ideas how to solve this?

    Although your symptoms aren't mentioned in the following document, I'd give it a try:
    Apple software on Windows: May see performance issues and blank iTunes Store

  • Since I updated my Creative Cloud desktop App to its last version, my files are no longer synchronized. I received the "fail to synch files" and "server error" messages.

    Since I updated my Creative Cloud desktop App to its last version, my files are no longer synchronized. I received the "fail to synch files" and "server error" messages.

    Hi, Jeff.
    I'm not on a network and I didn't change anything on my secutiy setups, so I got in touch to the customer support. They checked my computer and found nothing wrong, so they uploded some log files to analyse the case. I'm waiting for a answer.
    Thanks for the tips.

Maybe you are looking for

  • ASMA in HTTP adapter

    Hello All, I'm want to use the ASMA in http adapters. I tried in file adapters and  got the expected result but in HTTP couldn't get it. In file adapter: I have selected the ASMA option in sender communication channel and selected the filename so tha

  • Changes to MIME objects not updated

    Hi, Our BSP has a LOCAL java script file that is called when the application runs. When we make chages to the local.js file they are saved in the MIMEs but the changes are not getting reflected in the run. Basis performed Transaction SMICM -> Adminis

  • EXIT_SAPMM06E_006  for ME21N, ME22N, ME23N

    Hi all i need help to insert some fields from EKPO in the Tcode ME21/2N. For example EKPO-BRGEW on status tab in the to header part. I have appended this field into structure CI_EKKPODB also created subscreen for SAPLXM06 u2013 0111. need to assign t

  • No file icons and Explorer freeze

    Using Windows 8.1 x64. Here is what happened to my computer, File explorer does not show associated file icons sometimes. For instance: I have an shortcut of Downloads on desktop. Sometimes it shows blank white icon sometimes downloads icon.  When I

  • Getting selected row for command link in af:table

    Hi I have a h:commandLink in a column of my af:table. When it is clicked, I need to get the selected row data. I know the documentation says use setCurrentRowValue method, but I am not using the Data Control Palette - I get the data fromt the databas