Screen size 10 pixels to big after update to 10.4.10

I have to me at least, a strange problem... my screen size is too big for the monitor.
I have a dual-monitor system, btw.
When the mouse is at the far right of the desktop, the entire screen area moves in the other direction as to "accomodate" the lack of physical screen space. And moving it to the other side, vice versa.
The screens are also blurry compared to before 10.4.10 update.
If it helps, the screens are two LG Flatron L1919S, and my screen resolution is 1280x1024.
G5 (late 2005) Mac OS X (10.4.10) Dual-monitor

There are two ways to get Zoom. One is in the "Seeing" pane of "Universal Access" System Preference. It shows the commands to control it. The second method is by moving the scroll-wheel on a mouse while Control is held down. This works even if Zoom is turned off in "Universal Access".
Command-Option-8, once or twice, will always turn it off.

Similar Messages

Some iPad apps getting so big after update

Hi everyone,
Few days ago I have updated several apps on my iPad 3 after updating it to iOS 6. A couple of days later I've realized that three particular apps have grown in size, Asphalt7 growed from 1.01 to 1.50 Gb (but it perhaps is normal after the update), BUT iBook have increased for ~40 Mb to 1 Gb!!! Also, the Simpsons Tapped out game is now taking 890 Mb while the same app on my iPhone takes only 394 Mb. What is happening? How can I claim all those missing Mb? I tried deleting iBooks and reinstalling it, but I cannot get my space back, even then I delete the app, only 40 Mb are freed.
Any thoughts will be appreciated

Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost)
Settings>General>Reset>Erase all content and settings

Why doesn't my screen scroll up when typing after updating to 8.3?

What am I doing wrong?
After updating my iOS to 8.3 on an iPad I have been unable to see my curser once it progrsses down the screen behind the keyboard. The screen doesn't scroll upward to show the cursor.
This is very annoying since Id like to know where I'm typing and if I collapse the keyboard and touch the screen to move the cursor, the keyboard pops back up and hides the cursor. This typing feature works fine on my iPhone 6s with the upgrade but not on my iPad.
Any help would be appreciated on this matter

Turn off "Split Keyboard" in General settings / Keyboard / Split Keyboard

Black screen on apple tv 2 after update

I tried to update my apple tv 2. After 7/3-2012.
It become black screen after updated.
Is there somebody huh have a solution?

It works again. just need to have unplug the power cable for whil.

Screen size and resolution mismatch after 2008-008 update.

This is very odd. My screen is shifting around every time I move the mouse on my macbook pro. It appears that the mac doesn't think the full resolution will fit on the screen, and so shifts a few pixels up (or down, left, right) whenever I move around the screen. It's very difficult to use since it distorts whatever I'm reading. I've tried selecting different display resolutions: 1440x900, 1280x800, & 1024x768, but the problem persists even on lower resolutions.
Could be a red herring, but I've checked the install.log for errors and found a couple instances of this sequence:
Dec 22 07:42:04 gseven : update_prebinding[25268]: update_prebinding: too many errors (101)
Dec 22 07:42:04 gseven : update_prebinding[25268]: update_prebinding: error: terminating
Dec 22 07:42:04 gseven : update_prebinding[25268]: update_prebinding: error 256 running updateprebindingcore
I don't know if that could even be related. Anyway, does anyone have an idea how to fix this?

Hi xerhino, and a warm welcome to the forums!
Good work on your part!
Hope your doing OK with the Snow, Ice, and Winds!

Screen saver doesn't work after updating to Yosemite

When the screen saver should come on the screen remains black.
The screen saver is set to turn on after 3 minutes; Energy Saver is set to turn the display off after 15 minutes.
When testing the screen saver from System Preferences, the screen saver works.
When trying to activate it with a hot corner or by leaving the computer inactive, it does not work/the screen remains black.
It does this no matter which screen saver is chosen.
Is there something I'm missing? Thank you for your help.

I updated two different Mac to "YO" last week and neither encountered an issue. Screen savers are unchanged. However, there are other reports here of screensaver issues. Some have turned out to be caused by unneeded third-party utilities. Are you running any anti-virus programs, or programs that claim to "clean, optimize, or tune up" you Mac?

ITunes over-reporting size of tv shows after update

I updated iTunes and after the update am no longer able to sync tv shows. I have it set to update the oldest unwatched show from about 4 seasons of shows that I have, but now when i try to sync it is trying to sync the entire collection of shows and saying I don't have room on my iPhone.
How can I fix this?

Hmmm, I'm sad to see this post chain. I'm also having the same problem with pics not saving properly. I take the picture, it shows on the screen, but then does not save to the gallery. When I go to scroll through the picture gallery, I see only a generic gray icon, and when I look in the DCIM folder I see a 0.0 mg jpg. If I try to open this jpg, it says it's been "truncated". This has happened several times over the past two months, but the biggest bummer was last night. I was at the hospital to see my new Godson and took a couple of perfect shots. Now they're gone!!! So it seems nobody here has heard any tips to retrieving those truncated files.
I also find it curious that Verizon is saying it's not a known problem, when clearly there's a bunch of people here that know about it!

Video size issues/slow performance after update to CC 2014

Hello everyone,
I'm not an editor by trade, so please bear with me here. I've spent the last few days searching around for an answer and haven't been able to come up with much.
I'm on a late 2011 Macbook Pro, 2.2 GHz Intel Core i7, 4 GB 1333 MHz DDR3, AMD Radeon HD 6750M 512 MB, Mac OS X Lion 10.7.5 (11G63b).
I spent a month cutting my first little experimental feature which the assistant editor set up for me (and who is currently away).
My computer isn't rocket fast, but I was able to complete the first few passes on Premiere CC (7.2.2?) with few major issues.
About a week ago, I upgraded to Premiere CC 2014 8.0.
I immediately noticed that my footage went from this:
To this:
(The specifics of the footage:
As you might be able to tell, we shot very old school VHS to help sell the 90's setting. It was a nightmare to find the best way to export it all. I'm still not sure if we did this entirely properly -- and hopefully it's not the cause of these issues. Also, I know VHS is only SD -- we chose to import at the utmost quality, i.e. 1920x1440 and ProRes 422, because more of the image detail was present in low-light.)
I found that I had to select all the clips in each timeline, right click, and select the 'Set to Frame Size' to have the video full frame once again. Then I had to render everything.
As I tried to resume my edit, the performance was much slower. Playback is a nightmare. I get the beach ball of death constantly. It would take several minutes to save the project. And it started to crash about once an hour on top of everything.
But I continued to work for the last eight days, hoping that I'd be able to rectify this somehow.
I cleared the cache with no luck.
I read that I could uncheck 'Composite in Linear Color' to make it faster, but that wasn't an issue in the last build.
My playback and paused resolution is 1/4.
I read that I should update my OS to OS X Mavericks, but that keeps crashing too! Haha.
I understand that my system isn't the best, but I just want my project to perform as well as it did on Premiere CC before the update.
I just spoke to an Adobe tech who basically told me that there wasn't a solution here besides reverting back to Premiere CC from CC 2014 -- or buying a new Macbook.
But there has to be a way that I can get the same performance that I did before the upgrade, right? I have a feeling something happened to how CC 2014 is using the existing footage.
(Also, I noticed that clips where I increased the zoom, i.e. 100% to 110%, were back at their original size. And instead of saying 100%, it was now saying 300%. I'm assuming this is because of the 'Set to Frame Size' setting, but this wasn't the case on Premiere CC.)
Does anyone have any ideas what I can do here?
Here's my sequence settings on CC 2014:
And on CC:
For some reason, portions of this window are grayed out, and not in CC 2014. Not sure if this has anything to do with the issue.
Thanks a ton in advance everyone! I really can't afford to lose 8 days worth of work, so any help would be greatly greatly appreciated!
I'll be more than happy to provide additional info.
I'm really looking to find out, definitively, if my only two options are: a) go back to Premiere CC and lose my recent work, or b) buy a new laptop, which I can't afford.
(As a side question, is there any way I can transfer my recent work from CC 2014 to CC? I understand it's not backwards-compatible, but there has to be at least a partial solution.)
Best,
Jon

Thanks for the quick response!
So just this right (to DV):
I scrubbed through really quick, seems like it just may have worked.

HT201210 Stuck in recovery mode loop on ipad1 with blank screen!!!! After updating to 5.1.1 and error code 37.

Help! i dont know what to do. I need this iPad for college and it's stuck in recovery mode but the screen is blank. I tried downloading to newest itunes, press and hold both home button and power button. NO Joy! i shouldn't have ever updated! It worked just fine.

Force iPad into Recovery Mode
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times.

Screen Sharing doesn't work after updating to Remote Desktop 3.6.1

Hi everyone!
I hope others can help. We just noticed this at two different schools today after upgrading to 3.6.1. We upgraded Admin and Client Apple Remote Desktop to ARD 3.6.1 today and now we cannot share our screens with the clients. It turns black, hangs, then returns the client to its original desktop.
We tried from a 3.5.1 admin machine, and it still works fine as it used to.
We feel like the issue is 3.6.1, but cannot find any support for the issue online.
Other troubleshooting steps:
1) emptied user and system Caches
2) restarted all units
3) tried 3.6.1 admin to 3.5.1 clients, no luck
4) tried 3.6.1 admin to 3.6.1 clients, no luck
5) checked for loops in the network, nothing.
We can perform most other tasks like controlling the clients and copying files, but not screen sharing.
Thank you for your help!

All right! Total workaround here, and no fix, but at least we're able to Screen Share in ARD now. This is how we downgraded to 3.5.1 Admin in Apple Remote Desktop. The only hiccup that may not work for most is that you must have an older Remote Desktop file on hand. (hopefully from a computer that was not upgraded which was our case).
Here is what we did...
1) Login as an admin.
2) Throw out the Remote Desktop app (in Applications)
3) From another computer, drag in an old Remote Desktop app into your Applications folder
4) Throw out the "RemoteManagement" folder inside System/Library/CoreServices
5) From support.apple.com/downloads, download Remote Desktop 3.5.1 (both the Client and Admin installers).
6) Run the Admin install first, then the Client Install.
I did the above steps in two schools in a different order, but I wrote it this way to make it more streamlined. I never had to re-enter the Serial # or anything. Once I did the steps above, it just worked again.
Hope this helps you!

The Firefox What's New screen will not go away after updating to Firefox 10.0.

I updated Firefox to 10.0 on my Acer Laptop. Now every time I open Firefox the What's new page loads along with my chosen homepage in another tab. I can not stop the What's new page from loading.
No problem on my desktop, the What's new page loaded once then disappeared after that as it normally does.

See these articles for some suggestions:
*https://support.mozilla.org/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
*https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
*http://kb.mozillazine.org/Preferences_not_saved

Screen scrambles and freezes ipod after update

hey guys, im having some crazy problems with this ipod since the update...the screen kind of scrambles then freezes everything...is anyone else experienceing this and if so how did you fix it if you did at all...sorry if this is a repeat post but im really ****** about the whole thing...any suggestions would be most appreciated...thank you
Josh

I am having the same problem since August 2006. I tried everything everybody suggested, but to no avail. I then sent my 5G video iPod to Apple for repair. They sent it back stating "no trouble found". What a joke! If you go back to the previous version, you can't play music videos anymore, but scramble and freeze problem go away.
No point in talking to Apple tech support. They'll not understand or recognize the problem; they'll just waste your time. I hope some smart guy in this forum will eventually figure out a solution.

Screen sharing: can't access after update to SL

I have a set-up with a new mini server running SL Server 10.6.2. A Macbook Pro and iMac are on the network, they were both running 10.5.8. I manage my mini server with one of these computers through screen sharing.
I updated my Macbook Pro last week to SL 10.6.2.
I updated my iMac this week to SL 10.6.2.
I can't log in to my mini server from these 2 machines since the update. I get a message "Authentication failed, please verify user name and password".
I have restarted my imac under 10.5.8, and I can use screen sharing again to manage my server.
I am at a loss to figure why the update to SL on my clients has killed may screen sharing access to the server.
Any hints would be appreciated.
Thansk

1. Startup in Safe Mode
    http://support.apple.com/kb/PH14204
2. Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
Best.

When using Facebook thr Firefox the screen size is too big and cannot find way of reducing it to fit for seeing and reading?

When I open Facebook the print is very large and the page does not fit the screen so need to keep moving back and forth across to be able to read it. It was not like this before.
Please can you find a solution for me
Thank you

See this: <br />
https://support.mozilla.com/en-US/kb/Page+Zoom

Grey screen with prohibitory sign appears after update to Yosemite

Help? I've tried resetting the NVRAM / PRAM... Does not work Any other options?

Hello there, v3ha.
The following Knowledge Base article offers up some great recommendations for troubleshooting the issue with your Mac booting to a gray screen:
Mac OS X: Gray screen appears during startup
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Screen size 10 pixels to big after update to 10.4.10

Similar Messages

Maybe you are looking for