Screen spanning doc

i'm using screen spanning doctor with my new ibook g4 14iner. its working great, i have it hooked up to a old huge crt monitor and the colors and the quality are amazing, the picture on it is so crisp. but anyway i've read many reviews about how using this patch burns out your logic board because the 32mb video card is only supposed to run 1 image(mirrored or not). i built a little fan thing that keeps the air circulating under the ibook so it stays cool. i always check the cpu temp and its in the 120's which is pretty low. so is my ibook still going to get all messed but from it working to hard, or are most of the problems using the patch from overheating. sorry for such a long message and thanks for your help
-john

i use that program also with my 19" lcd flat panel i have for extended display - and i always leave my computer on so there have been times it's been hooked to my other display for 24+ hours - and the only part that ever got warm on my iBook is the lower left corner by the trackpad - nothing weird or anything, and cpu temp doesn't get super high either and no fan ever kicking in so i am not concerned with my iBook becoming messed up with it. i also have a new 14" iBook (1.42ghz) and have had no issues - i would say overheating would be the thing to worry about but, like i said, i've had no issues ^_^

Similar Messages

IMac Intel with Parallels, Two Monitors and Screen Spanning

Hi,
Longtime Mac user forced into using Windows XP for my business. I have an iMac G5 2.1 (iSight) PowerPC. I need two monitors with screen spanning so I'm thinking of getting an iMac Intel, running Bootcamp or Parallels with XP Pro, and using a screen-spanning program.
1. Can I run Windows XP on the Intel Mac and use screen spanning with a PowerPC iMac?
2. Is it better to load the screen-spanning software on the XP or Mac system?
Thanks! Any help appreciated.

Hi and welcome to Discussions,
if nobody answers your questions it could also be that nobody has tried it yet.
I haven't tried this setup yet, so forgive me for fishing in muddy water.
Windows XP is capable of using two (or depending on the graphics card even more) monitors for duplicating or spanning.
My own two Intel Macs are showing me this opportunity in the preferences.
Since I never had the need to do so I have never attached a second monitor.
The Intel iMacs and MacPros are capable of attacing second monitors however with the iMacs you a adapter which you can get from Apple.
I would suggest (if possible) to go the nearest Apple Store and try to convince the guys there to do such a setup for you to verify that it works.
Good Luck
Stefan

Connecting external monitor--not screen span

Lots of people ask about screen spanning and I see a clear answer there...but I am just trying to a find an inexpensive way to monitor my FCP editing projects on a cheap field monitor (or more likely an old television) for color correction purposes. I do own the apple vga adapter but thats it at this point--what should i do next? thanks

If you have an imac G5, you can color correct it for Pro color matching (NOT the 17, just the 20).
Forget the iMac vid. adapter. The VGA output on the iMac is below VESA standards (intentional? I don't know... but the Powermac/Powerbook is good!). If you're using a Trinitron like I am (or plan to) for external color work, the iMac will possibly offer you dim video like the Mac Mini.

Screen spanning emac 700 MHz

Hello all,
I presume this is a quite stupid question, but here goes; is it possible to do screen spanning with a 700 MHz eMac? I've got a Iiyama Vision Mater Pro 455 here - and I'd like to span the screen instead of mirror it completely. That way I can edit much more easily with FCP.
Is there any way to do this through software? (I tried Screen Spanning Doctor, but they've excluded the 700 MHz) Or do I need to upgrade the hardware - if so, what hardware?
Thanks a bunch everybody!
eMac 700 MHz Mac OS X (10.4.8)

it doesn't work with a 700 MHz.
So I guess if it isn't possible I need to upgrade the hardware. Is this possible?
Sorry, I missed that you'd already tried it; apologies. But if Screen Spanning Doctor doesn't work, you may be out of luck. It's not possible to upgrade the video chip in your eMac, and I don't think a later-model eMac logic board would fit in your eMac's case, though I can't say for sure. Even if it is possible, it's probably not going to be cost-effective. Logic boards for 1GHz eMacs are going for over $300.00 US on the sites I've found that carry them, and you could probably buy an entire 1Ghz eMac for not much more, particularly if you sell yours and apply the proceed toward the purchase of the later-model unit.

Screen Spanning and external monitor

Hello,
This morning I experimented my iBook and screen spanning.
I got my resolution to 1280X1024, but- The mirrored image sat in the middle of the external screen..I don't know if this is my monitor that is doing this, or if it's some setting I can set on either the laptop or monitor.
Any ideas?
Thank you!

Did you use Screen Spanning Doctor?

Screen spanning doctor won't work

I am using an extra monitor with my iMac and have had success with screen spanning doctor in the past. Now without reason, it won't work. I've tried resetting the PRAM to no avail. Any ideas?

Hi Casey
You may get an answer by posting or searching in The Unix Forums.

External LCD Display & Screen Spanning

Hi All
I need to connect an external LCD display to my iMac G5 1st Gen computer.
Is this the right cable -
http://store.apple.com/Apple/WebObjects/ukstore.woa/wa/RSLID?mco=6C04E099&nplm=M 8639
Also I have been reading in this forum about a screen spanning hack to the firmware. Sounds painful but what are practical steps to set this up?
Many thanks in advance
David

G'day mate
Thanks for the reply from Oz.
Just had another good look at the back of the external LCD and it has got both VGA and DVI ports on it. Which will get the best results do you think?
Also here is a dump re the graphics card in my iMac -
GeForce FX 5200:
Chipset Model: GeForce FX 5200
Type: Display
Bus: AGP
Slot: AGP
VRAM (Total): 64 MB
Vendor: nVIDIA (0x10de)
Device ID: 0x0329
Revision ID: 0x00b1
ROM Revision: 2103
Displays:
iMac:
Display Type: LCD
Resolution: 1440 x 900
Depth: 32-bit Color
Built-In: Yes
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display:
Status: No display connected
As you can see, the card is a GeForce FX 5200. The web site refers to iMac G5's with GeForce FX 5200 Ultra cards and not the GeForce FX 5200. (My iMac is a Rev A machine).
Do you think this will cause issues? I need to run the iMac and the LCD at a show for my company and I am a bit concerned that I might end up with a Mac with no working display. Is that likely?
Cheers
David

Install Screen Spanning Doctor with Leopard?

I have an iBook G4 (1.33 GHz PowerPC with 1.5 GB DDR SDRAM) running Leopard. I just bought an external monitor and would like to do screen spanning.
There is one way to install Screen Spanning Doctor that I know will work (boot iBook in Panther off an external Firewire drive, install the hack, then boot it into Leopard off the internal drive), but I don't want to do this if I don't have to.
Has anyone tried to install Screen Spanning Doctor (for the first time) on a machine running Leopard? If so, did it work? Thanks.

wweber2268:
Try posting in one of the Leopard forums, probably the Using Leopard forum. You are more likely to have folk familiar with what you are attempting look at your post.
Cheers
cornelius

Using three monitors with screen spanning and mirror at the same time

I have a mac pro with two graphics cards and I currently have three monitors connected using screen spanning which works fine.
But I would like to change this so the desktop is spanned over two monitors and the third monitor is a mirror of one of the other two.
Is this possible?

Thanks very much, perfect!
Only thing is you don't need to press the "?" button. But it seems a little temperamental when you option + click + drag. I found you to have to deselect but clicking anywhere in the window and reselected the window you wish to mirror (which I assume press the "?" does the same thing).
I never thought it was going to be this simple, I was sure I would need to install a third party app or something.
Thanks again!!!!!!!

Does my macbook support screen spanning?

My macbook details are as follows:
Hardware Overview:
Model Name: MacBook
Model Identifier: MacBook2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MB21.00A5.B07
SMC Version: 1.17f0
Sudden Motion Sensor:
State: Enabled
Chipset Model: GMA 950
Type: Display
Bus: Built-In
VRAM (Total): 64 MB of shared system memory
Does my macbook support, with the addition of a monitor using the
adapter ...screen spanning (e.g. the ability to drag a app over onto
the second screen so that someone can say watch a movie from that
screen while I surf the web on my macbook's main screen)?
Best Regards,
John Musbach

Great! Thanks for the reply

Imac G3 How to get the crt off? or screen span one or the other

I have an imac g3 3500 mh and a slot loading drive. but the crt is geting very old the computer is like 10 years. but how do i screen spam on it.. i know there is a vga port on the back of it and i have a vga screen hooked up to it at the moment but its just that same pic as the other one.. i scree span with my mac book so i know how.. but how would i do it? Know if i cant do that is there a way i can turn off the crt? that would help even more as i hate crts I would jut put the imac under my desk and thats fine with me as i dont care about the computer being donw there or is there omthing i could put the logic born in and make it like a mini tower? i dont care if i mees up the computer also as becuase i have a brand new mac book but it would be cool to bout the mac book in the cace of the old i mac as a joke lol. and my mac book is the last gen not the new new ones bues i need fire wire lol ok thanks. and my main lang is french and i typed this all in eng. ok thanks.

Hey Jake,
I have an imac g3 3500 mh and a slot loading drive. but the crt is geting very old the computer is like 10 years. but how do i screen spam on it.. i know there is a vga port on the back of it and i have a vga screen hooked up to it at the moment but its just that same pic as the other one.
Hmm wasn't aware that any of the 350s had a VGA port.
but would there be a way in the computer to unplug the crt?
There might be a way but it would involve going into the computer and disconnecting the video cable.
If you have the bottom off you could turn the "screen" control down on the flyback. It's the big black thing on top of the PAV on the computers right and those controls can be seen from the bottom right (computer's). I use a chopstick shaved into a flat bladed screwdriver point to do this.
Richard
Message was edited by: spudnuty

Screen Spanning in OS X

I am creating an interface in Flash to control some videos
and animations that run off of a database (The use of the database
driven animation is why I need to control it with flash). It is
2048x768. I need it to span across my two screens when playing at
full screen in Flash Player.
I am using OS X 10.5.2

No because the Windows OS doesn't have the drivers and doesn't recognize the Mini-DVI port.

Powerpoint full screen/span over two monitors

Hi,
I have looked around, but I have not been able to find the answer to this question.
I have two monitors where I want powerpoint to display the presentation in full.
As it is now you can only have it display on one monitor (no I don't want or am talking about the presentator view).
But I want it to span over both of them not having to start two powerpoints in windowed and stretching them on each monitor.
Does anyone have any ideas?
Thanks in advance.
Kind Regards,
Donn Gwuan

Hi,
Do you want to show one presentation crossover two monitor at the same time?
If it is, please try the following steps:
Go to Control Panel>All Control Panel Items>Display>Screen Resolution>Multiple display> Extend these displays
Go to the presentation on the Slide Show tab>Select it to show on the Secondary Monitor >Check on Use Presenter View as shown below.
For more detail information, please refer to the following link:
http://www.howtogeek.com/61390/how-to-master-your-presentations-using-presenter-view-in-powerpoint/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
George Zhao
TechNet Community Support

2 Screens / Spanning

Hi,
I am happy with my 20" iMac, but now I would like to connect my large screen HD TV to my computer. The TV only supports up to 1024x7xx something so when I mirror, it will reduce the resolution of my iMac screen automatically.
I read about the spanning hack, and feel its a good thing, now my question:
I do not need spanning, I would like to send the output e.g. of my DVD Player, QT or DIVX Player to the 2nd screen, which is running in a different resolution. Is that possible ?
Got my point ? I use my computer (slow), and can play a DVD to my 2nd screen where my kids watch it.
Thanks for any hint,
Tom

You need this:
http://www.rutemoeller.com/mp/ibook/ibook_e.html
I use it with a TV screen via a svideo adapter on my iMac G5 rev B.
this basically makes your Mac "see" a second monitor and you can mouse around on both monitors have windows in either monitor. Heck, you can even put the menu bar on the "other" display...
Have fun.

[Help] Span or mirror? 15" 1GHz

Hi gurus,
I've roughly gone thru related threads on my question but can't really find an answer.
I have an 1GHz iMac G4.
And I've recently gotten a 32" lcd tv (samsung LA32R81B) with pc in. (VGA).
I plan to connect my mac to it for viewing of dvds.
Since the iMac have VGA out,I've bought a VGA display adaptor.
Question is.
should I be mirroring the imac's display or spanning it?
My tv's resolution is 1366 * 768.
I understand that there are a few apps regarding external display situation. them being.
SwitchResX
Screen spanning Doc
DisplayConfigX
which shld I be using to fully optimise the display?
Thanks in advance!!

If you're just looking to play a DVD then mirroring is all that you need to do. Just change the settings on the TV so that 1024x768 is expanded to full screen.
mrtotes

Screen spanning doc

Similar Messages

Maybe you are looking for