Screen specifying tab

for va03 In program SAPMV45A which screen specifies the position of the tab.

Go to SE16N
Table - T180
Panel - HBS0
Execute
You will get the details which you are missing
Thanks

Similar Messages

  • CALL TRANSACTION AND SKIP FIRST SCREEN to specified tab in TCODE 'IW32'

    Hi,
    I am using CALL TRANSACTION AND SKIP FIRST SCREEN in ALV Grid Report to call IW32 tcode and it goes to tcode skipping the first screen. But it goes to the default header tab in the tab control. Whereas I wish to go to the specified tab 'OPERATIONS'.
    Can any one help me, as to how to resolve this issue ?
    Thanks in advance.

    Sridher,
    I have the similar requirement. but in my case its COSTS tab. Could you please provide the code you have used for this to work?
    I used standard "call transaction with mode 'E' ". This seems to be working but I am not pleased by my effort. Is there any proper way that you might have followed ?
    Greatly appreciated your help.
    Regards,
    Reddy

  • Change/ Add screen in Group Box specify tab layout for Asset master Record

    Hi All,
    I need to add or change group box in specify tab layout for Asset Master Record. Please advice where i can change or create new Group Box.
    Thanks & Regards,
    Pankaj

    Hi,
    Try at below path:
    Financial Accounting (New)>>Asset Accounting>>Master Data>>Screen Layout>>Define Screen Layout for Asset Master Data.
    here you can change the layout for the same.
    Kind Regards,
    Mehul

  • Application link to specified tab

    Hi,
    Can anybody help me with this issue: We have an apllication that has a tabbed panel and I want to give the user a link so that when he opens the link it will take him to the specified tab?
    Best Regards
    Boštjan

    bump :)

  • When refreshing screen, another tab pops up with a file document and the download screen.

    Each time I refresh the screen another tab opens. It looks like:
    {"longFormFreeVideos":0,"primaryNetwork":"HBO","networkSmallLogo":"/api/entity/thumbnail/Network-56/50/30","genres":["War Drama","War","Adaptation","HBOseries","Drama"],"watchItOnDemand":false,"watchItOnDownloads":false,"type":"TvSeries","releaseYear":0,"shortFormVideos":7,"globalUid":"TvSeries-100451","longFormVideos":7,"description":"U.S. First Recon Marines prepare to invade Iraq; soldiers pass time while awaiting orders; a writer from ``Rolling Stone'' magazine becomes embedded with the unit.","name":"Generation Kill","topProjects":[],"providerCodes":["d"],"videoIsProtected":false,"endYear":2008,"episodeListings":{},"shortFormFreeVideos":7,"episodeDetails":{},"isProtected":true,"watchItOnTv":false,"topContributors":[],"episodeSeasonNumber":0,"startYear":2008,"isNetworkPremium":true,"longFormProtectedVideos":7,"watchItOnFancast":false,"episodeAirings":{},"shortFormProtectedVideos":0}
    I am assuming this is different depending on which screen I refresh. It also brings up the download screen too. Why?

    Mozilla has download mirror websites around the globe and uses them to "balance" the downloads of Firefox so users don't need to "wait in line" for their download.
    Here's a listing of those mirrors. <br />
    http://www.mozilla.org/community/mirrors.html

  • I added a theme, but it only appears in the toolbar, not the entire screen (new tab page). How can i get the entire theme to show (fullecreen)?

    my theme is only showing behind the toolbar (tabs, search bars,etc.) when i go to the "Mozilla Firefox start page", my theme is still only in the toolbar, and the rest of the page is white. My theme is also only showing such small pieces of the theme chosen that most of the time you cant even tell that it is a fox in the corner. Is there a way for me to make my theme appear across the full screen?

    ok, since you are saying that my theme is a lightweight theme, are there "heavy weight themes" that would also theme the 'content' areas?

  • Exporting data from a screen's tab pages to an excel sheet

    Is it possible to export data in different tab pages of a screen into a single .xls.
    Suppose i am having 5 tab pages on my screen and having one export button, is it possible to export all tabs data in one go in a .xls by pressing the export button.

    Batul,
    As I understand, through the standard Export button functionality you can only export the visible fields on the Page.
    Thanks
    Sumit

  • User completing fill in screens and tabbing

    Good morning,
    In the training that I'm creating, my user needs to fill in a
    screen, like a pop-up dialog box. They need to enter several
    different lines of information. Rather than have this done as a
    demonstration, I want it to as closely mirror their actual job as
    possible, so, I want them to be able to enter the information
    themselves. I know how to add the text boxes, and hide the typing
    that I entered while recording, but, my problem is, on one screen,
    there are multiple lines of information. In their live environment,
    they would type the line of information, and then tab to the next
    field where they would type the next line etc. etc. Then, when they
    are done filling in the information, they would click the OK button
    (which I know I can add a click box). My question is, how do I set
    this up so they type a line and tab (it's the whole tab things
    that's throwing me off).
    Any information would be really appreciated!
    Thank-you,
    Helen

    Hi Helen
    Unfortunately, there isn't an easy way to do this in
    Captivate. You simply cannot have perhaps five different text boxes
    on the screen, complete them and click a button that evaluates all
    of them at the same time.
    Here is how you would do it. Again, we will assume five
    different text boxes.
    You will need five different slides. The first will have all
    text boxes blank. You then have a Text Entry Box superimposed on
    the first text box of the dialog. You probably want to configure
    Tab as the shortcut key that evaluates what was typed. If the text
    was entered correctly, the user advances to the next slide.
    On the next slide, you repeat the process. The difference is
    that the image that was captured should have the first text box
    completed. You then have a Text Entry Box superimposed on the
    second text box. Again, you probably want to configure Tab as the
    shortcut.
    You repeat this process for all five slides. I'm guessing the
    last slide will have a button or something the user will click that
    would evaluate what they typed into the Text Entry Box.
    Hope this helps some... Rick

  • Why a tab page show while I specified  tab page access??

    I want to restrict access to the tab to specific users.
    I edit grant access in tab,select Specify Access Settings and
    then select user that I want him to see. And I don't mark the
    check box, Display Tab To Public Users. But when I access this
    page like the user that doesn't have privilege to see this tab
    page, I can see this tab page. Am I do anything wrong? Or
    forget something? Pleaseeeeee help me.
    Thank you,
              Sirin

    hi sirin,
    i tested this with 9.0.4.1 and it works fine there.
    here is what i did.
    i granted user A view rights on the page the contains the tabs.
    then i edited the tab and explicitly set access settings for the tabs that i want user A have view rights. by default the tabs are inheriting the ACL information from the page. this means that you have to edit the access settings for every tab and change it from inheriting to explicit ACL definitions.
    after doing this user A could only see the tabs on this page where he has explicitly set the view permission.
    regards,
    christian

  • How to specify tabbed canvas appearing?

    Hi All,
    I've three canvases two content and one tabbed, the first content canvas contains a data block which goes to the second content canvas via pressing a button caontins GO_Block.
    I've drawed a tabbed canvas (using its specified tool) in that second content canvas but this tabbed one is appearing in both content canvases!
    I want this tabbed canvas to appear only in the second content canvas only! How Plz?
    Thank you
    Note: I'm using Forms 6i

    Use SHOW_VIEW('Name of your tab_canvas') to programmatically show a canvas, use HIDE_VIEW('Name of your tab_canvas') to hide it.

  • How to hide screen group tab based on account group in XD01/02

    Hi Folks,
    I have added two screen group( custom tabs like 'general data' ) in XD01 screen. Based on the input parameter 'account group' I want to hide(supress) one of the tab. How can I read the account group no?
    Thanks and Regards,
    Kawish.

    Hi,
    Can you try to access the field like below. Just try to access the account group from main program in the method.
    field-symbols: <lf_KTOKD>  type KTOKD,
       data:               L_KTOKD type KTOKD.
    assign ('(SAPFM02D)KNA1-KTOKD') to <LF_KTOKD>.
    if sy-subrc = 0.
         l_ktokd = <LF_KTOKD>.
    endif.

  • When in full screen, the tab previews are blank

    I'm using windows 7, fully updated. I've enabled "Show tab previews in the windows task bar". And when I'm in full screen mode, the tab previews are just a solid color instead of a preview of the corresponding tab. Happened once then went back to normal.

    You are probably inadvertently swiping to another full-screen app. Are you using a magic trackpad? Does this happen without you touching anything?

  • Unwanted screen heading(Tab) in a screen set having only one screen.

    Hello Experts,
    We are at the initial phase of go live of SAP Work Manger-6.0 for one of our client.
    We found one strange behaviour as mentioned below.
    We have one screen set(at bottom),which is part of a tile view(contains two screen sets), The screen set at bottom contains only one platform(Ipad) and only one detail screen(buttons at the bottom of the screen).
    It works perfectly fine but sometimes the look and feel gets distorted, which causes an issue to the end users.
    I mean, some times the screen appears as a tab with a black row and a blank yellow box(as highlighted in red in the 2nd screen). Which reduces the size of the screen and hence the buttons become very small in size.
    Details :-
    SMP Server-2.3 SP05
    SAP Work Manger-6.0
    Agentry Client-6.1.5.49 (WPF)
    PFA screen shots for both the cases.
    1.  expected look and feel.
    2.     Unwanted look and feel.
    We need your expert advice to resolve this issue, Please help!!
    Thanks,
    Sudhir.

    Thank you so much Bill!!
    This setting is already there.
    PFA screen shot of the same setting in Agentry.
    Please suggest, If you are referring any thing else.
    Thanks,
    Sudhir.

  • Fix blank screens using tabs in new CC

    In some circumstances the recently CC version is at random opening blank screens when operations with galleys (closing, adjusting, etc) or manipulating tabs (this example) are involved.

    I don't know how to delete my question, anyway I'm not having this problem anymore. In our organisation the IT department deploy Firefox updates with certain settings and limitations, in the tap-options the checkbox for opening new windows in new tabs where checked but disabled. They made some changes to make this checkbox enabled and now it works as expected if it's check new windows open i new tabs and if it's not in new windows. They never opens in the same tab as they did before.

  • Intermittent Blank Screen - Multi-Tab Corporate Dashboard

    Hi All,
    We are a facing an intermittent blank screen issue with our corporate dashboard. Details are as follows: -
    Environment:
    BO XI 3.1 SP2 FP2 (Two servers on production)
    Xcelsius 2008
    Live Office
    QaaWS
    Issue:
    Sometimes we only see a blank screen (Not even the initializing screen) when a corporate dashboard is opened from Infoview.
    This is a multitab dashboard and is built using Live Office and QaaWS connections.
    Initially the issue was occuring only on one server and sometime later it started occuring with the second server as well.
    We restrated the services on both the servers and the issue disappeared. (Maybe it was due to cache getting cleared up, though not sure on this)
    What we need:
    1. Are there any known issues for this kind of issue?
    2. What are the possible reasons for intermittent blank screen?
    I have searched through the forums and BOB forums and have found about the visibility issue. In our case we do not face any issues with that.
    Regards,
    Abhishekh

    Hi Amit!
    Running the trace is fine, but the issue occured only once and that to when we restarted the corresponding servers the issue vanished.
    Why I feel that this is not something related to flash is because, first the issue appeared on the first prod box (merantime the second prod box was showing the output correctly). Later on (maybe in 5-10 mins) even the second server started having issues.
    So far the issue has appeared only once. However the business would like to understand the possible reasons and would like to avoid similar situations in the future.
    We do not have access to either the Firefox or Chrome. Though we have tried with multiple versions of IE. The IE version on which the issue appeared was IE 6/7.
    I think, I will close this thread for now. If the issue resurfaces again, we can look into it further.
    Hope to hear back from you soon!
    Regards,
    Abhishekh Jain
    Edited by: Abhishekh Jain on Oct 18, 2011 9:17 AM

Maybe you are looking for