Screen split with slide effects

hi I am editing a concert and at a precise moment I want 2different images to slide into screen covering each 50% of the screen.
I want one image to slide from top to bottom but stay onscreen and the other image to slide from bottom to top.
I know how to play multiple images at a same time but I dont know how to cut them to a precise mesurment and how to create the slide effect.I am editing using the dvpal setting.
Thanks
Danny

Layer them. Put one image on V1, the other on V2...double click on them to load them into the viewer where you can SCALE and CROP them. And you can use CENTER to move them and have them slide in. KEYFRAMING...you need to keyframe the movements.
Really simple stuff...
Shane

Similar Messages

Iphoto causes half my screen to be reversed (screen split with the right side half now on the left side) and computer freezes. Any suggestions about a fix?

iphoto causes half my screen to be reversed (screen split with the right side half now on the left side and the left hand side on the right.) and screen gets multiple blurry copies. Also the computer freezes. Any suggestions about a fix? Can I delete iphoto and reinstall? If so, will I lose my photos?

Please post a screenshot that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

Why is video screen split with two identical pictures?

Following a clean reinstall of Windows XP and Internet Explorer 8, Flash Player 11.6.602.180 was downloaded. Video clips now play with screen split horizontally by a green line and identical pictures above and below, compressed vertically to suit.
Lotus14

Most likely you are running an outdated graphics driver; see http://forums.adobe.com/thread/945765

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK with plug-in keyboard and mouse

Hi, Derek -
...the screen splits into 4 areas and open windows seperate and shrink.
Sounds like Spaces is being activated somehow. With the wired keyboard and mouse in use, select the Exposé & Spaces control pane in System Preferences, click the choice in that pane for Spaces. See what the settings are. There are some activation settings in that pane - by default, F8 activates it.
It could be that the bluetooth keyboard has some stuck keys and is activating Spaces; or that the activation command has somehow been reset to something that the bluetooth mouse, or bluetooth itself, is triggering.

I have Hello screen after i slide to set up gel language options after select English , Egypt it request to connect with WI FI after connect start to activate my IPhone after that it unable to activated because the activation server is unavailable

I have Hello screen after i slide to set up gel language options after select English , Egypt it request to connect with WI FI after connect start to activate my IPhone after that it unable to activated because the activation server is unavailable and request to connect to itunes and no activate.

4 possible causes of that message:
1] Activation server is actually down. Very rare occurrence, but it does happen.
When it does occur, down time is very short. Solution - try again.
2] Your firewall or antivirus are blocking the connection. Solution - temporarily
deactivate your firewall or antivirus until the update completes.
3] Computer being used for the activation has previously been used to jailbreak
an iOS device. Solution - use a computer that has not been used to jailbreak an
iOs device.
4] Your iPhone is jailbroken. Google may provide some direction. Be advised the jailbreak
may have made changes that will prevent the iPhone from successfully activating.
Terms of Use for this forum prohibit discussion of jailbroken iPhones.

HT1414 i am unable to restore my iphone 4s " screen showing USB cable arrow showing to connect to iTunes" when i connect to itunes it after asking restore starts (step 3) updating itunes with no effect to screen which is still showing usb and itunes symbo

i am unable to restore my iphone 4s " screen showing USB cable arrow showing to connect to iTunes" when i connect to itunes it after asking restore (step 3 without going to step 4) starts updating itunes with no effect to screen which is still showing usb and itunes symbols

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

Problem with applying Spry "Slide Effect"

I am having problems attaching the slide effect on image. Below is the code for the test page I am working on to learn how to use this effect (most of which came from Adobe):
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
<script type="text/javascript" src="../SpryAssets/SpryEffects.js"></script>
</head>
<body>
<p> </p>
<p> </p>
<style type="text/css">
#content{ visibility: hidden;}
</style>
<div id="content">
Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Fusce vel sem nec massa cursus
interdum. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos
hymenaeos. Duis euismod eros consequat nibh. Pellentesque non purus. Nam lectus magna, faucibus
vel, aliquet id, commodo vitae, elit. Maecenas sollicitudin, nibh iaculis bibendum consequat,
odio erat volutpat ipsum, sed dignissim ligula mi in justo. Nam placerat. Nullam fringilla
tortor. Quisque lacinia, mi non iaculis adipiscing, turpis lacus eleifend velit, dictum
facilisis pede diam sagittis nulla. Nunc vestibulum elementum enim. Etiam lorem felis, faucibus
sit amet, vulputate sed, lobortis et, nunc. Morbi vitae lectus.
</div>
<p> </p>
<p> </p>
<div id="chakra">
<p><img src="../images/chakra_yantra_200px.jpg" alt="chakra" width="200" height="201" /></p>
</div>
</body>
</html>
The idea is that there is an image called "chakra", and when the mouse goes over the image then the text is suposed to slide out as a caption.
When I attempt to attach the effect after selecting the image I am asked to ***Select Target Element ID*** of which there are two options
div "content"
and
div "chakra"
I choose -- div "content"
I then get an error message that says:
“To get this behavior to work properly, you must select the container tag you want to slide. (For example, if you want to slide an <image> tag that is wrapped with the <div> tag, select the container <div> tag. The container tag must have a unique ID.)
Please select a container tag as your target element , or cancel the behavior, wrap your target element with a div tag, assign the new div tag a unique ID, and reapply the behavior. When you reapply the behavior, select the new div tag as your target element.
The action will not be added to your document.”
What am I doing wrong?
I have spent hours on this but not getting anywhere. Are there any good visual tutorials to explain this? I have read everything that Adobe has provided but I am still not getting it, but I am getting a head ache. )-:
I'm using DW CS5 on a Mac, OS X 10.6.6

Add a div element as follows
<div id="content">
<div>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Fusce vel sem nec massa cursus
interdum. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos
hymenaeos. Duis euismod eros consequat nibh. Pellentesque non purus. Nam lectus magna, faucibus
vel, aliquet id, commodo vitae, elit. Maecenas sollicitudin, nibh iaculis bibendum consequat,
odio erat volutpat ipsum, sed dignissim ligula mi in justo. Nam placerat. Nullam fringilla
tortor. Quisque lacinia, mi non iaculis adipiscing, turpis lacus eleifend velit, dictum
facilisis pede diam sagittis nulla. Nunc vestibulum elementum enim. Etiam lorem felis, faucibus
sit amet, vulputate sed, lobortis et, nunc. Morbi vitae lectus.</div>
</div>
Gramps

Problem with Spry:Repeat and Slide Effect on IE6

I run the website for my kids' hockey association and I'm not
a web programmer. I am trying to display events in a Spry region
using spry:repeat. The data is coming from a Google Calendar . I
display the event date and title on the main page. I have the
onclick set to call a javascript function that exposes the details
using the spry slide effect. It works ok except in IE6.
The following creates my dataset from a method call to a
Coldfusion component that returns the XML I need:
<script type="text/javascript">
var ds1 = new Spry.Data.XMLDataSet("
http://tornadoyouthhockey.org/Events.cfc?method=EventXML",
"events/event",{distinctOnLoad:false});
</script>
The following function slides open the detail:
<script type="text/javascript">
function startBlind(rid) {
var contentdiv = document.getElementById('panel'+ rid
+'Content');
var panel_height = contentdiv.clientHeight;
if (panel_height<100){
var bd = new Spry.Effect.Blind('panel'+ rid +'Content',
{duration: 800, to: '100px', toggle: true});
else {
var bd = new Spry.Effect.Blind('panel'+ rid +'Content',
{duration: 800, to: '0px', toggle: true});
bd.start();
</script>
Within the repeat I have:
<div class="EventPanelLabel"
onclick="startBlind({ds_RowID});">{startDate} —
{title}</div>
I think the XML looks OK but for some reason when the page
loads, IE6 returns:
Exception caught while loading
http://tornadoyouthhockey.org/Events.cfc?method=EventXML:
[object Error]
The page seems to work fine in Safari and Firefox on the Mac
and IE7 as well as Firefox on Windows. Just IE6 seems to be having
the problem. Could you please take a look at
http://tornadoyouthhockey.org
and provide any suggestions you may have?
Also, is there a way to hide the {startDate} - {title} I'm
seeing while the page loads?
Thanks,
Kevin

Kin:
Thanks for your reply. I made the changes you suggested but,
unfortunately, IE6 is still giving me the same error when the page
loads:
Exception caught while loading
http://tornadoyouthhockey.org/Events.cfc?method=EventXML:
[object Error]
Could this be part of the problem an need to be changed as
well? :
<div id="panel{ds_RowID}Content"
Any other ideas? The page is live if you'd care to look...
http://tornadoyouthhockey.org
Kevin

Screen splitting error and red boot screen

Hi, I was using my macbook pro just now and the screen started to glitch and show black vertical bars and the displayed image was split up. I tried to see if there's an unresponsive program that i can force quit then the screen just turned grey and was stuck there.
I then manually restarted the mac, it prompted me with a press button to continue booting up screen then it was stuck on the grey screen again.
I tried to start in safe mode then it booted with a red screen and i believed did a system check. But I'm not sure. It then got stuck on the grey screen again.
I rebooted the machine manually and then now it booted up fine.
It has happened twice before. Once the split screen issue was solved by quitting Spotify and the second time similar events happened as described above.
I have previously taken the mac to the genius bar and they ran a hardware check and found that everything was fine. Since I couldn't reproduce the error whilst being in the store they said there was nothing they could do.
Update:
The screen splitting issue has occurred at least twice since the event happened above. I have managed to collect another problem report which i can show in addition to the first one.
I believe that there is a problem with the dedicated graphics card since whenever i use gfxCardStatus to switch to the AMD Radeon HD 6490M graphics card the screen splitting problem occurs. The problem also occurs when the machine automatically switches to the dedicated graphics card with things like Spotify, Google maps and other more intensive applications. Moreover, the second time the problem occurred when i was streaming a TV show and gfxCardStatus showed that the machine has switched to the dedicated Radeon card.
I'm not sure what i can do about it right now other than trying not to use the dedicated graphics card. Any help would be very much appreciated, thanks!
If it helps, I've upgraded the ram myself previously. But that was a few years ago and didn't show any problems when i first installed it.
It is an early 2011 Macbook Pro with OS X Mavericks 10.9.4
The split screen issue looks like this:
Apologies for the rotated image I don't know how to rotate it on the site.
It also appears identical to the one shown here, three posts down: https://discussions.apple.com/message/15920113
The problem report of the first event is shown here:
Anonymous UUID: 81B375DF-0157-0360-53AE-96FF39CBAC4B
Wed Jul 2 01:41:51 2014
Machine-check capabilities: 0x0000000000000c09
family: 6 model: 42 stepping: 7 microcode: 40
signature: 0x206a7
Intel(R) Core(TM) i7-2635QM CPU @ 2.00GHz
9 error-reporting banks
Processor 0: IA32_MCG_STATUS: 0x0000000000000004
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e): 0x00003f7f8f9ccb5f
IA32_MC3_MISC(0x40f): 0x000000000003ffff
Processor 1: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e): 0x00003f7f8f9ccb5f
IA32_MC3_MISC(0x40f): 0x000000000003ffff
Processor 2: IA32_MCG_STATUS: 0x0000000000000004
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e): 0x00003f7f910c5aa8
IA32_MC3_MISC(0x40f): 0x000000000003ffff
Processor 3: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e): 0x00003f7f910c5aa8
IA32_MC3_MISC(0x40f): 0x000000000003ffff
Processor 4: IA32_MCG_STATUS: 0x0000000000000004
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e): 0x00003f7f90a09905
IA32_MC3_MISC(0x40f): 0x000000000003ffff
Processor 5: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e): 0x00003f7f90a09905
IA32_MC3_MISC(0x40f): 0x000000000003ffff
panic(cpu 4 caller 0xffffff800ecdcad9): "Machine Check at 0xffffff7f90a09905, registers:\n" "CR0: 0x000000008001003b, CR2: 0x00000001089ba000, CR3: 0x0000000011ba1000, CR4: 0x00000000000606e0\n" "RAX: 0xffffff8119485100, RBX: 0xffffff8021c65c00, RCX: 0x0000000000002833, RDX: 0xffffff8021c74c80\n" "RSP: 0xffffff811ab1bed0, RBP: 0xffffff811ab1bf10, RSI: 0x000000001dcd64ff, RDI: 0xffffff8021c65c00\n" "R8: 0xffffff8111bfd078, R9: 0x0000000000000000, R10: 0xffffff811ab1be20, R11: 0x0000000000000200\n" "R12: 0x00000000ffffffff, R13: 0x00000000ffffffff, R14: 0x0000000000000000, R15: 0x0000000000400001\n" "RFL: 0x0000000000010246, RIP: 0xffffff7f90a09905, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2422.110.17/osfmk/i386/trap_native.c :168
Backtrace (CPU 4), Frame : Return Address
0xffffff8111bede80 : 0xffffff800ec22f79
0xffffff8111bedf00 : 0xffffff800ecdcad9
0xffffff8111bee060 : 0xffffff800ecf3fef
0xffffff811ab1bf10 : 0xffffff7f90a0c023
0xffffff811ab1bf30 : 0xffffff800f0af292
0xffffff811ab1bf80 : 0xffffff800f0af367
0xffffff811ab1bfb0 : 0xffffff800ecd7417
Kernel Extensions in backtrace:
com.apple.driver.AppleAHCIPort(3.0.5)[7F56F309-28C2-342A-82C0-3908C164EBCC]@0xf fffff7f90a02000->0xffffff7f90a1bfff
dependency: com.apple.iokit.IOAHCIFamily(2.6.5)[AB2D7D6A-B59B-3039-AE08-CBCC38208911]@0xfff fff7f8fd72000
dependency: com.apple.iokit.IOPCIFamily(2.9)[4662B11D-2ECA-315D-875C-618C97CDAB2A]@0xffffff 7f8f27c000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13E28
Kernel version:
Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
Kernel slide: 0x000000000ea00000
Kernel text base: 0xffffff800ec00000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 117766305248
last loaded kext at 88599052330: com.tuxera.filesystems.tufsfs.fusefs_txantfs 2010.12.28 (addr 0xffffff7f914ef000, size 94208)
loaded kexts:
com.tuxera.filesystems.tufsfs.fusefs_txantfs 2010.12.28
com.orderedbytes.driver.ControllerMateFamily 4.4.3
com.orderedbytes.driver.CMUSBDevices 4.4.3
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.macos.driver.AppleUSBEthernetHost 7.0
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.14.28
com.apple.iokit.IOBluetoothSerialManager 4.2.6f1
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDAHardwareConfigDriver 2.6.3f4
com.apple.driver.AppleHDA 2.6.3f4
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleHWAccess 1
com.apple.iokit.IOBluetoothUSBDFU 4.2.6f1
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.ApplePolicyControl 3.6.22
com.apple.kext.AMDFramebuffer 1.2.4
com.apple.driver.AppleIntelMCEReporter 104
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.AMDRadeonX3000 1.2.4
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMuxControl 3.6.22
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.kext.AMD6000Controller 1.2.4
com.apple.driver.AppleIntelHD3000Graphics 8.2.4
com.apple.driver.AppleIntelSNBGraphicsFB 8.2.4
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyEventDriver 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleSDXC 1.5.2
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.6f1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IOAcceleratorFamily 98.22
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.kext.AMDSupport 1.2.4
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleThunderboltEDMSink 2.1.3
com.apple.driver.AppleThunderboltDPOutAdapter 3.1.7
com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.driver.AppleUSBMultitouch 240.9
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.driver.AppleThunderboltNHI 2.0.1
com.apple.iokit.IOThunderboltFamily 3.3.1
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 683.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2 GHz, 8 GB, SMC 1.69f4
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6490M, AMD Radeon HD 6490M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x014F, 0x4A4D313333334B534E2D3447202020202020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x014F, 0x4A4D313333334B534E2D3447202020202020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.6f1 14216, 3 services, 15 devices, 1 incoming serial ports
Serial ATA Device: TOSHIBA MK5065GSXF, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Hub
USB Device: IR Receiver
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1

You might try removing these 3rd party applications and see if there is an improvement.
com.tuxera.filesystems.tufsfs.fusefs_txantfs 2010.12.28
com.orderedbytes.driver.ControllerMateFamily 4.4.3
com.orderedbytes.driver.CMUSBDevices 4.4.3

"Replace with After Effects Composition" broken now, too?

Does Replace with After Effects Composition actually work on 8.2, or did Adobe c**k that one up, too?
I've got an 8.2-native project in PPro (created from scratch in 8.2), I click on one or more of the clips on the timeline, choose "Replace with After Effects Composition", as I've always done with 8.0. AE opens up, and a new comp is created, but none of the media is ported over; I'm left with a blank comp/project in AE, and an AE project in my PPro timeline that's empty.
*long, slow clap*

Grant, I did figure it out (and felt rather silly when I did). You have to select all your files from the Project portion of AE and drag them into the Render segment - bottom left corner of your AfterEffects screen - in order for them to play. I guess I should have come back to the forum and reported once I got it working, so everyone would know that there's nothing wrong with Adobe. Once you do that, there are all sorts of super-cool things you can do with a slide show for video presentation. I did decide to put it into Windows Media Play and convert to MPEG before uploading to the internet, however, because it reduced the size to roughly 15% of AVI. I preserved AVI for DVD because of quality, which is far better.
There's an awesome video tutorial - thank you, Andrew Kramer!! - on creating slideshows at: http://library.creativecow.net/articles/kramer_andrew/slideshows/video-tutorial.php - now that you (hopefully) know what you're doing wrong in AE.
Pam

'replace with after effects composition'

hey guys, so when editing this one video in pr, I decided to color correct a couple clips in AE so I just right clicked them and chose replace with after effects composition, so it would nicely replace in the pr timeline with the corrected footage.
except when I finished the third one I looked back and realized the first two clips were replaced with the thrird clip! so that clip appeared 3 times in my video! I was trying to import the ae comps separately and everything but it kept thinking that they were the same clip, the ae projects were all named clip 1, clip 2 and clip 3, I could open them up in ae and they were fine, just not when bringing them to ae.
why is this? thats not supposed to be right? I should be able to 'replace with after effects comp' for multiple clips if I want right?

Grant, I did figure it out (and felt rather silly when I did). You have to select all your files from the Project portion of AE and drag them into the Render segment - bottom left corner of your AfterEffects screen - in order for them to play. I guess I should have come back to the forum and reported once I got it working, so everyone would know that there's nothing wrong with Adobe. Once you do that, there are all sorts of super-cool things you can do with a slide show for video presentation. I did decide to put it into Windows Media Play and convert to MPEG before uploading to the internet, however, because it reduced the size to roughly 15% of AVI. I preserved AVI for DVD because of quality, which is far better.
There's an awesome video tutorial - thank you, Andrew Kramer!! - on creating slideshows at: http://library.creativecow.net/articles/kramer_andrew/slideshows/video-tutorial.php - now that you (hopefully) know what you're doing wrong in AE.
Pam

Replace with after effects composition problem, video dissapears

Hi everyone,
I'm having a problem with premiere's cs5 "replace with after effects composition" command. Every time I try doing it I get just a new comp made in after effects but no files so the screen is just black without content.
Then the video in premiere dissapears too and the "file" in the timeline turns a pink color.
Any ideas about whats going on here? thanks in advance.

Grant, I did figure it out (and felt rather silly when I did). You have to select all your files from the Project portion of AE and drag them into the Render segment - bottom left corner of your AfterEffects screen - in order for them to play. I guess I should have come back to the forum and reported once I got it working, so everyone would know that there's nothing wrong with Adobe. Once you do that, there are all sorts of super-cool things you can do with a slide show for video presentation. I did decide to put it into Windows Media Play and convert to MPEG before uploading to the internet, however, because it reduced the size to roughly 15% of AVI. I preserved AVI for DVD because of quality, which is far better.
There's an awesome video tutorial - thank you, Andrew Kramer!! - on creating slideshows at: http://library.creativecow.net/articles/kramer_andrew/slideshows/video-tutorial.php - now that you (hopefully) know what you're doing wrong in AE.
Pam

Random Black/White Logo Screens Interfering With Everything

I recent upgraded my 4th Gen iPad to iOS 8.3, and since then it has been afflicted by random white or black logo screens that can happen at any moment in any application. One see the progress bar move for a few seconds, it gets about half way, and then permits me to return to work, but never for long before it hits again.
I have restored my device (from a local back up) three times with no effect, and rebooting/reseting the device tells me to "Slide to upgrade," but the problem persists.
I have even done a total wipe of my iPad, resetting it to factory conditions, and played with it for a while to see if I could repeat the problem, but could not.
This tells me the problem is with the iOS 8.3 upgrade, though I have been able to find someone with an answer yet on these forums. Any assistance would be greatly appreciated. This thing is dead in the water for the moment!
iPad (4th Generation)
iOS 8.3 (12f69)

This is very long winded and wordy, but I am trying to cover as much as I can in this response. If there is anything that you do not understand or if you are uncomfortable with trying any of this, please post back and I will answer your questions as best I can. There are many very knowledgeable people here that will hopefully offer help as well.
I backup with iCloud and with iTunes. I also sync my devices with iTunes because I have photos on my Mac that I want to sync and I have documents that are stored on the devices that I have moved back and forth with file sharing since not all apps work with iCloud. I also have most of my music collection on the iPad that was ripped from CD's and I don't use iTunes Match so I have to sync those songs to the device.
This is the approach that I would take and be forewarned that it can be very, very tedious and it will take some time. It could take days to sort it all out.
The first thing that I would do is backup with iCloud and then erase the device in Settings>General>Reset>Erase all content and settings. You will have to go through the setup process again. You will be given the option to restore the iCloud backup. Go ahead and say yes to that option. All of your content will be downloaded from the cloud and that can take hours if you have a lot of content on the iPad. This will not restore any synced content that you have on the device, so you will still have to sync photos, music, books or any other non iTunes purchased content back onto the device. If you do not sync with iTunes, this step will be a non issue for you so you will not have to worry about it. However, if you do sync some content with iTunes, at this point, I would forgo that step for now. Use the iPad and see how it goes. If it all goes well, then sync whatever you were syncing back to the device. If the problem appears after syncing with iTunes, assume that there is something corrupt in iTunes.
If all of that fails to do any good, you can backup again, erase the device again, go through the whole set up process but do not restore the backup. See how that goes. If everything goes OK, sync with iTunes - but only if you sync content with iTunes - and see how that goes. If everything works out OK, you can assume something in the backup was corrupt and causing the problem.
If you use iTunes only, always make sure that you backup the iPad one last time before you do the clean install from iTunes. Make sure that you transfer all purchases and apps into iTunes as well. Then restore as new and use the device for a while and see how it goes. Slowly add a few of your purchased apps at a time. See how it goes, add more apps, see how it goes. When you get to a point where you believe that things are good to go, try restoring the backup which will restore all of your app data and the device settings. If the problem comes back, it has to be something in one of the apps or a corrupt setting on the iPad. Restore as new again, and download or sync your purchases back from iTunes and start all over again. Do not restore the backup.
What this amounts to is, doing things by process of elimination. Like I said, it could take days to sort it all out. I am a glutton for punishment and I don't mind going through all of the tedious rigamarole involved.
Raoul_Duke wrote:
How would one move the data from the "corrupted" back up?
Unfortunately, you may never know what item, data, file, photo, song, etc. is corrupt and you cannot move selective data back from the backup. It is all or nothing. If you feel that the backup is corrupt or if you go through all of the steps and know that the backup is corrupt, then you cannot use it at all and you have to start over again.
This is one of the reasons why I keep copies of my most important files on my Mac, and not just in the iPad backups. I can selectively add files back to the iPad if I need to start all over again.
Sone links that might prove to be helpful.
iOS: Understanding 'Erase All Content and Settings' - Apple Support
How to erase your iOS device and then set it up as a new device or restore it from backups - Apple Support
How to back up your devices using iCloud or iTunes - Apple Support
Use iTunes to restore your iPhone, iPad, or iPod to factory settings - Apple Support
Re-download or transfer your iTunes Store purchases from an iPhone, iPad or iPod to a computer - Apple Support
Download past purchases - Apple Support

Problem with keyframe effect - at start and end (crop and scale)

I'm having this odd problem with keyframe effects.
Setup:
I have a gif image that I have on video 1 for say 2 minutes.
I have my real video on video 2. It is a person talking.
First I start with my video full size on top of video 1.
Though the motion and cropping keyframe management I slowly reduce the scale and crop my video image so that it is reduced to the lower left bottom of the screen, on top of the gif, which is now revealed.
My problem is at the start and end of the transition from full video to small box on lower left on top of my gif I often get 1-2 frames where the video goes blank and/or I get a bunch of random red bars on black background appearing on the video - Or I get the gif from video 1 without the video 2 at all (it disappears).
I've tried moving my start of end of the transition to skip the bad spots - but these new transition starts or ends not get their own bad spots in the same way. Its only a couple of frames but it's really unacceptable for the finished video.
Note, when I say transition here I don't mean real transition events, but rather the start of effects that are managed with keyframes. My move from start to end of the effect runs for about 4-6 seconds.
Any ideas?

Bill,
Here is more detail and screen captures.
Concept:
I have 3 minutes of video. It contains a person making a speech. During parts of the speech I want to reveal a graphic image that will be discussed. The speech will begin with the speaker full screen. Half way in, the speaker will shrink down to 45% in the lower left corner of the screen. While the animation occurs (the shrink, move and cropping) it will reveal the graphic below. The graphic will take up the full screen with the speaker at 45%.
Technique:
I put the video in Video 2 and the graphic, a GIF image in Video 1. The scene begins with the speaker talking at full screen. After a minute, I animate the move of the speaker using Motion: Scale and Position and Effect: Crop changing Top, Bottom, Left and Right sides. The animation occurs over approximately 8 seconds.
I am manually adding keyframes at the start and end of the animation. I set the ending state of the video image in the end keyframes. The interpolation between these start and end keyframes should be managing the animation.
Problem:
At the beginning and end of the animation – usually 1-3 frames from the start and 1-3 frames from the end, where the change has barely begun or almost ended, I get these problems. On some frames, the video (in Video 2) completely disappears only showing the Video 1 GIF image below. On other frames, the video image turns black with horizontal red bands half way across.
Troublshooting:
I’ve tried deleting all start and end keyframes and moving the start and end earlier or later to see if I can fix this, but the problem continues to show up in these new locations.
I have added a few screen shots.
1:32:15 is the start of the animation change and 1:40:22 is the end of increasing from the mini video speaker to full size (on top of the GIF).
At 1:40:16 the video image completely disappears only showing the GIF below.
At 1:40:17 its back and slowly increases in size through the interpolation until it is full size at 1:40:22.
Let me know if you need anything else.
Thanks!
Evan

How do I take screen shots with the new update iOS 5 on my iPad and iPhone?

When I try to take screen shots on both my iPad and iPhone they both come up with the screen to shut down the devices. I've updated both with iOS 5. Any clues on how to take a screen shot with iOS 5?

As with the previous iOS versions.
Press and hold the Home button and use the on/off or sleep/wake button as a camera shutter button for the screen shot.
Or while pressing and holding the on/off or sleep/wake button before the slide to power of appears, use the Home button as a camera shutter button - this must be done before the slide to power off appears.

Screen split with slide effects

Similar Messages

Maybe you are looking for