Screen starts flashing colors, goes black, becomes unresponsive?
When I was using my computer, the screen suddenly when gray, then starting flashing colors (Red, Green, Blue, White) then would eventually go black. The computer became unresponsive but I could still turn on/off the caps lock key. I did a hard restart and it worked fine for a while but before long the same thing happened again. Since then, it was completely unresponsive for a while (couldn't turn it on by holding down the power button) and it has worked for a little while if I take out the battery and hold down the power button for a while before trying to restart it. I've also tried to reset my PRAM and PMU, which seemed to help for a while but eventually this same thing would happen again.
Is there anything else I can do? If I can get it up and running for a while again, what should I do to prevent this from happening again?
I don't have the software disc to boot off of, but I could get in a few days if I really have to.
Thanks, I'd really appreciate any advice I can get!
HI and Welcome to Apple Discussions...
If you cannot boot from your install disc, try booting in Safe Mode
What is Safe Mode
Carolyn
Similar Messages
-
My Mac book pro won't start! It boots as far as the sign in screen and then everything goes black. Please help.
Which model MacBook Pro do you have (e.g., “15-inch Late 2011”) and which version of OS X are you running?
Clinton -
After forced check my screen start flashing
I'm writing from my windows pc now (unfortunately) since on my arch linux pc i got a big problem, i have rebooted it the normal way (# reboot) but after rebooting i had forced check and it had to reboot again, after that he passed the check, now comes the problem, i see the nvidia logo as usual and after few seconds i see the pointer, after few moment (not even a second) the screen starts flashing, changing from the nvidia logo to the mouse then to some other screen which i can't see what is, between the changes there is a pause of 3 second with completely black screen, i really don't know what to do..
Edit: on the each force check there are many Ext-2-fs error ext2_lookup: deleted inode referenced
Last edited by aleksa (2010-02-02 21:56:46)Resolved the problem, in level 1 i edited deamon deleting gdm then reboot and in level 3 i run x server which said that the problem is libpng12 (new cairo bug), so i just run a full system update followed by a reboot and rewriting gdm in deamon and it was all ok. It was completely my bad.
-
The screen on my MacBook goes black often. I can still see a faint image of what's on the screen, and can only get it to illuminate by moving it back and forth. What could the issue be? How can it be fixed?
The startup disk may need repairing ...
Launch Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If the disk needs repairing, restart your Mac while holding down the Command + R keys. From there you can access the built in utilities in OS X Recovery to repair the startup disk. -
When i click on the CreativecloudSetup my screen starts flashing.
Hello, I am a new CC user and i just downloaded it but only to find out when i click on it my screen starts flashing and doesn't even open!
If anyone could help that would be great!
~BillOkay, No error message nothing pops up.
corner of screen flashes as if its trying to open.
windows 7 x64
chrome (have not tried anything else yet)
malwarebytes (virus protection) yes i have turned it off and on after same result
Yes it worked before on my old PC (same specs)
This is an admin account
8GB of RAM 102 GB free on (c:) drive -
Hi,
I am facing issue with Flash Builder 4.7.
Whenever I am trying to open any mxml or .as file after project setup, flash Builder 4.7 becomes unresponsive without showing any error message or popup.
At the initial project setup, I am able to open file but when I try adding 5-6 source folder under Flex build path->source path, it’s become unresponsive.
Everything works fine in Flash builder 4.6, but I have license key only for flash builder 4.7 and want to use Flash Builder 4.7.
Please help me to solve this issue.Fixed: In Project prefs: Flex Build path: added the similar swc folder called "local" from FB 4.6 eclipse/plugins directory and removed the 4.7 one.
For some reason the 4.7 eclipse/plugins/com.adobe.flexbuilder.project_4.7.0.345990/dcradS wcs/4.5/locale folder has localisation folders in it and not swc's like in FB 4.6.. -
my screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!
If you have not done a factory reset on the device, I recommend doing a complete factory reset.
Factory Reset - Warning this will reset device back to original factory settings.
This method will not erase any MDN/MIN information
Turn off the phone
Press Power + Volume Up/Down at the same time and hold until display will show a triage android screen
Display will show:
Reboot system Now
Apply sdcard:update.zip
Wipe Data/Factory Reset
Wipe Cache Partition
Use VOL Down key to scroll down to "Wipe Data/Factory Reset", press home icon to select option and wipe device.
Display shows "All user data will be wiped out", press VOLUME Up to continue or VOLUME Down to exit.
Press Volume Up
Press Home to select "Reset System Now" - device will reboot
If the problem persist I recommend having a store technician take a look at the device.
Copy and paste the link below into your browser's address bar for the store locator.
http://www.verizonwireless.com/b2c/storelocator/index.jsp -
IPad screen locks itself and goes black when nudged? very frustrating
Hi, my IPad is driving me nuts! Can anyone help please?
I can be in the middle of anything ( games, apps, typing, banking, etc. etc.) and with the slightest movement or nudge - the screen locks itself and goes black??
I then have to press the home button, slide to unlock it - and it opens back up to exactly where I was.
This happens constantly, and is so frustrating!Is there a case or screen protector that is possibly interfering with the proximity sensor (detects if the phone is near your face, allows the keypad/screen to be visible when the phone is away from your face)
-
HDMI into TV - MacBook screen starts flashing
Hey
Basically tried to plug my macbook into my TV bu using the HDMI port it worked fine for maybe 10 minutes but after that the laptops screen started flashing like the refresh rate or resolution wasn't coping properly?
anybody had this before and anything to be worried about?Howdy Sigh me,
If you are having an issue with your MacBook Pro's display reacting badly when connected to an external display, I would suggest that you troubleshoot using the steps in this article -
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
My screen starts flashing. What to do?
Hi. My screen starts flashing after some minutes use. Tried to turn off autolight but it doesnt help. Anyone know whats strong?
Hi. My screen starts flashing after some minutes use. Tried to turn off autolight but it doesnt help. Anyone know whats strong?
-
(MacBook 2014 model) most of keybord stopped working can't login. Restarted, screen started flashing bootup was slow and but no success. Tried safe boot but still no effect. Any suggestions please!! Urgentw
Try SMC and NVRAM resets:
https://support.apple.com/en-us/HT201295
https://support.apple.com/en-us/HT204063
Then try the safe boot again:
https://support.apple.com/en-us/HT201262
If no success, make an appointment at an Apple store genius bar for a FREE evaluation.
Ciao. -
my screen on iphone 5 goes black and will not to respond to anything , can someone tell me how to fix this problem . thanks in advance !?
I just replied in your other post
To solve most of iPhone os problems you can perform a soft reset which will not change anything inside the phone
It'll simply remove the errors
To do that
1.Hold power button for 5 seconds
2.without releasing power button press home button and keep both pressed till the apple logo comes up
3.Now release both buttons
Your phone has now been reset -
T400 screen flashes then goes black
As the thread title says, my lenovo t400's screen recently started flashing. It wasn't that bad at first but it increased in frequency and started to be very annoying. I noticed changing from battery to cable would temporarily stop it, also turning down the brightness helped.
However the problem started getting worse and now when I am forced to have it on the lowest brightness settings. If I turn it up it starts flashing erratic and then the screen turns off. The system itself keeps working though and if I turn the laptop off or in sleep mode and then turn it on again the screen "works" again (still with flashing). Ofcourse if I left the brightness above its lowest level it will instantly go black again.
Also most likely related, half of the screen (left side) has taken on an "redish" collor.
What could be the problem and is it something I can fix myself?naraga wrote:
On the back it says type: 6474-B84. I assume you mean that?
And yes if I were to shine on the screen with a flashlight I can see the content.
Correct, these are the original specs of the machine:
ThinkPad T400 (6474-B84):
P8600(2.4GHz), 2GB RAM, 160GB 7200rpm HD, 14.1in 1440x900 LCD, Intel 4500MHD, CDRW/DVDRW, Intel 802.11agn wireless, WWAN option, Bluetooth, Modem, 1Gb Ethernet, UltraNav, Secure Chip, 9c Li-Ion, WinXP Pro
I can think of three possibleculprits, LCD cable defective, inverter defective or LCD panel's backlight defective. The cable and the inverter will be cheaper to replace, the panel will be more pricey I guess, (I don't know the current LCD panel prices).
T400's came with standard CCFL and LED screens. You need to find out which one you have. You can try the part lookups page from Lenovo and follow the instructions here: http://support.lenovo.com/en_CH/product-and-parts/partsLookup.page?
(You need the machine type and your serial number, please don't post the serial number here in the forum)
P.S.: If you have a LED screen cluprits could be the cable or the panel, no inverters there AFAIK)
/L40SX/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E/A20p/A22p
A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T4x0x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/10*X2xx/2*X200T/4*X30x/Z60m/3*Z61x
Comunidad en Español English Community Deutsche Community Русскоязычное Сообщество -
When I turn on my Macbook Pro it starts, shows the apple begins to load then shuts off, screen goes black. Help?!?
Hello Lucinda49090,
It sounds like you are not able to successfully boot your MacBook Pro. I understand how frustrating that can be. I recommend this troubleshooting from the article named:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367?viewlocale=en_US
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
You could also try booting to the recovery partition and repairing the disk with the Disk Utility to see if that might help as well:
Disk Utility 12.x: Repair a disk
http://support.apple.com/kb/PH5836?viewlocale=en_US
Thank you for using Apple Support Communities.
Regards,
Sterling -
I was amazed when the screen of this intel based iMac went black after trying to open a Word document. Since then it has happened several times when I have inadvertently tried to open such messages. I then have to shut it down and restart in order to do anything on the computer. Any cure for this problem? Thanks
Hi-
Please clarify-
Exactly which version of Microsoft Word do you have installed on your computer?
Do you by any chance have Parallels or VMware installed on your computer (in other words, are you running Microsoft Windows on your iMac as well?)
When the screen goes black, does the computer still appear to be functioning? What happens if you do the following when the screen is black: press and HOLD the command key down, and then press and release the tab key once.
Also, what happens when you just try to start up Microsoft Word normally- not by double clicking an attachment, but by double clicking on Microsoft Word in the finder?
Maybe you are looking for
-
Error in reading a file:
Hello all, I got the error below: Exception java.io.FileNotFoundException: D:\Home$\BLOB.txt (No such file or directory) the code is: PreparedStatement pSt = con.prepareStatement("insert into CLOB_COL Values(?,?)") ; pSt.setString(1,"U"); <b>FileInp
-
LocalATP from R/3 in CRM 4.0
Hi Experts, I have set up the ATP in SPRO. ATP check is happening for TAN and ZTANs but not for TANN in Free of charge ordes in CRM 4.0. I am getting the following errors- Availability check/information: ATP error log (display via long text) Message
-
I have a sync account and have the app installed between my two mac computers and one pc. However, if I add bookmarks in one device, this is not updated on the other device. What should I do.
-
How To add a field in search criteria in SAP standard report
Hi AlL, I have a requirement where i need to add a field in search criteria of selection screen and display in output of Standard SAP report. I have read in threads that to obtain Access key and modify the code in std report , if i am not able to get
-
I have the photography plan presently (at $9.99/mo), but I also previously owned Photoshop CS5. I would like to use the Complete for CS Owners deal, but it tells me to contact support. Now what since I can't find a phone #?