Screen stops redrawing after 100 documents are generated [mac/js/cs3]

I wrote my thesis this semester in InDesign, a script which takes a folder of content and does a page layout based on that content. For our thesis show I'd like to have the script running in a loop. I've writen it so it creates a document, makes it look nice, pauses for 5 seconds, and closes. This works perfect...
...except after 100 documents (exactly 100 it seems), it stops redrawing the screen. The document is pure white, the rulers only draw halfway...not very impressive at all. This doesn't happen on my unibody MBP (at least, not at 100) but on the G5 we have to use at the thesis show.
Is there anything I can do about this? I have it changing from Normal to Preview mode on every cycle, do I have any other options or should I try and limit the script to 100 runs and then maybe call it via do script and wait until it's done?
The thesis show opens Tuesday, we've been very limited in the time we have to test with the machines so any alternatives would be great.
Thanks so much.

This is not a real answer, but perhaps you could record a video of the script running once, and then playback the video in a loop? I'm sure you'd like to avoid this...

Similar Messages

  • My iPad2 screen stops responding after about 5 mins, can this be fixed?

    My iPad2 screen stops responding after about 5 mins, can this be fixed?

    Have you tried to give it a reboot? Hold down the sleep and home keys for about 20 seconds. WHen you see the silver apple, let go and let it reboot and see if that helps.

  • SQL Server 2012 stops running after setup files are copied.

    SQL Server 2012 setup stops running after setup files are copied.
    I've experiencing the same issue on two different machines. Both are 64 bit running Server 2008.
    On both of them I tried installing using the files from the ISO. I initially used winzip to extract the files. The setup was running fine, but the SQL Server engine had an error when it installed. Then using the Add/Remove programs i uninstalled all of the
    SQL Server 2012 applications, including the setup files.
    Now when i try to install using the "New SQL Server stand-alone..." wizard it will copy the setup files and then the wizard never comes back. I've tried mounting the ISO, extracting with winrar, Burning the ISO to a dvd and downloading the 3 files. I also
    tried mounting ISO of the version that was just recently released. I run into the same issue with all of them.
    Thanks for the help.

    can you try 
     setup.exe
    /Action=install /x86 /UpdateEnabled=false
    If this doesn't work please use below FAQ to locate and upload SQL Server setup logss.
    FAQ
    Regards,
    Ahmed Ibrahim
    SQL Server Setup Team
    My Blog
    This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
    "Mark as Answer" and "Vote as Helpful"
    on posts that help you.
    This can be beneficial to other community members reading the thread.
    Thank you, it's work!!! :) Maybe problem was in /UpdateEnabled=false and I could try to install a x64 version... but too late, setup in progress and I do not want to have to try all over again :)

  • Reader stops when after loading document.  Says stops working!  It will load without any document!

    Reader stops when after loading document.  Says stops working!  It will load without any document!  Help!??  This has been going on for several months.  Help!

    What is your operating system?  Reader version?

  • Yoga 13 touch screen stopped working after update KB3000850, please help!

    Hi, my Yoga 13 touch screen has been working fine until yesterday. The laptop came with Windows 8, and last year I upgraded to Windows 8.1 without issue. Yesterday, I installed optional update KB3000850 from Windows Update, and immediately the touch screen stopped working. I have tried the following methods, all without success:
    * Uninstall KB3000850 from Windows Update
    * Use Windows Restore to restore to the point before yesterday
    * Re-install Intel Chipset Driver from Lenovo official driver page
    * In Device Manager, uncheck all the "allow system to turn off to save power" options for the USB input devices under Human Interface Devices then restart
    * Two-button shutdown and restart
    * Install Lenovo Driver Manager and let it check for new drivers
    * Download Cando multi touch panel driver (Note: I could not install the driver because all I got was a .cab file which does not allow me to install)
    As of now my touch screen is still not working. Computer Information page from Settings shows that there is no touch or pen device for my screen.
    Can anybody help me with this? Thanks!

    Very true, this has been a known problem since the first day Lenovo released the Yoga 13.
    I need to send Lenovo a bill for my time spent rebooting.  So far i am on my 8th reboot.  In the past, around 5 reboots after winddows update would work.  This time... who knows.
    Of course it always happens when you have a deadline.
    Please post back if you have found a better soultion than system restore.
    Thanks for posting this issue.  More users need to bring this to Lenovo's attention.

  • The audio in "speak screen" stops working after a few uses. IOS 8.2 did not fix this problem unfortunately. I'm using the Alex voice on a Sprint iPhone 6 plus- if that matters.

    I really enjoy the speak screen feature, as the voiceover is too inconvenient and tricky to use. The speak screen option works oerfectly for reading, and helps me as I'm dyslexic. However, the Alex voice stops working after the initial use or soon after. I then have to restart the phone every time in order to get the speak screen to acruelly speak again. Really annoying and was hoping that IOS 8.2 Would fix this, but it appears it had not fixed this bug. Any help with this?

    Any problem when connected to another wi-fi network besides your own?
    The only additonal troubleshooting options after powering the iPhone off and on, an iPhone reset, and resetting network settings on the iPhone is restoring the iPhone with iTunes from the iPhone's backup and/or restoring with iTunes as a new iPhone or not from the backup.
    If no change after restoring as a new iPhone or not from the backup - the same when connected to any wi-fi network besides your own as well as not being able to maintain internet access when connected to your carrier's cellular network, the iPhone has a hardware problem.

  • User exit trigerred after billing document is generated

    The objective is to set the Sales Order Item Level System Status. Using a line item that is created in VA01, I have to create a reference item in VA02. For both the line items created I have to generate billing document in VF01. After the billing document is created (when I give save in VF01), using the billing document number I have to set the Billing and delivery system status to completed.
    The functional specification provided me with a user exit USEREXIT_NUMBER_RANGE in RV60AFZZ. But the exit is getting triggered before the billing document number is generated. So I am unable to set the status.  Can you suggest me a user exit that would be triggered after the billing document is generated?

    if your invoice is relevant for accounting posting - you may use one of SD/FI exits (check RV_ACCOUNTING_DOCUMENT_CREATE and search for call customer-function).
    OR you may define new output type for your invoice and put your logic there, nast-objkey will have invoice number.

  • No CO-PA documents  are generated after  Sale processes

    Dear All,
    There are no documents  generated after Sales processes in CO-PA.
    Even the revenue cost element is assigned to Profit segment.
    And all SD conditions are defined in ke4i.
    How can we solve this issue?
    With best regards,
    Kamila

    Hi
    Pls check the following:
    1. The revenue Accounts have been created as cost elements with category 11 or 12
    2. The Condition Types are not excluded from flowing into COPA
    IMG>Controlling>Profitability Analysis>Flow of Actual Values> Transfer of Billing Documents>reset value/quanity fields
    regards
    Sanil Bhandari

  • When I open Reader why does screen flash and parts of document are not readable?

    When I open a PDF my screen flashes, changes color and then when the document comes up parts of it are blacked out. When I close the document the screen flashes again. I have just downloaded the latest version of Reader.

    The slowness may be caused by background processing after the library update. Are you shooting RAW?
    Also, where is your iPhoto library stored? In your Pictures folder or on an external drive?
    How much free storage do you have on your system drive
    3. Finally when my old folders, books and contents of my old photo gallery appears in the left side of the application I have access to no photo and the program remains as it were unresponsive.
    You may need to repair your iPhoto Library.
    Run the iPhoto library first aid tools and use the options "Repair permissions" and "Repair database".
    To launch the "First Aid Tools" hold down the options-command keys while double clicking your iPhoto Library.
    Then select "Repair Database". Repeat with "Repair Permissions". If this does not help, back up your iPhoto Library and use the option "rebuild".

  • What are the billing documents are generated

    hai
    what are the documents generated after delivery.
    2) what are the billing douments u will after delivery
    3) after invoice how it will be appear in financial accounting

    Hi nag,
    1).what are the billing douments u will after delivery?
    Ans. Accounting and profitability analysis documents
    2). after invoice how it will be appear in financial accounting?
    Ans. Customer acc. credited and com. acc. debited
    Reward points pls.
    Regards,
    Govind.

  • X1 Carbon Touch Screen stops responding after sleep

    Hi, 
    My X1 Screen does not come back after sleep for several minutes. I've encountered this problem the very fist day I've received it, a reboot solved the problem but after few days it happened again, this time it took 2-3 hours for it to come back after several reboots. After a week it was gone for good, Service replaced the motherboard and just received my X1 back yesterday. Today it happened again. A reboot solved the problem but symptoms are same. Comp goes to sleep, when I try wake it up, X1 works but diplay is totaly gone. I can hear the sounds, see the fingerprint sensor etc is alive but can not wake up the display.. 
    Model is 208A and Win 8.1
    Any ideas ? 
    Thanks

    Hey...got your back on this one! I returned a T440s because of this.....tech support had no idea...same problem for the replacement they sent to me, and again they it's a motherboard issue. Nope....trial and error...found the solution. Download and upgrade your fingerprint pro software and it's fixed. Here is the link. Please post if it worked for you too!
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS031504

  • My HP Envy touch screen stopped working after getting an HP Bios update yesterday

    Can someone please tell me how to fix my touch screen. I received an HP BIOS update which caused my touch screen to stop working. I've tried re-calibrating it but it won't accept my touch which tells me the screen is no longer enabled.
    I tried finding where to enable and could not find where to enable finger touch. I've also tried looking for driver updates and the driver appears to be up to date.
    Thanks
    This question was solved.
    View Solution.

    I have a different type of TouchSmart, but this may work for you:
    Press the Windows logo key + X (if using a Windows 8 computer -- if Windows 7, click the Start button, type Device Manager, and click Device Manager in the search results).
    Select Device Manager from the list.
    Click the little arrow next to Human Interface Devices to expand the list.
    Click the touch screen driver (in my case, NextWindow Voltron Touch Screen).
    Right-click, and select Enable from the list.
    Click Yes if a dialog box asks if you are sure you want to enable the touch screen driver.
    On some models, it isn't obvious which device in the list controls the touch screen. I have read in other posts that some people have fixed the problem by disabling and re-enabling each device.
    If that does not work, you might try going to hp.com (http://www8.hp.com/us/en/support-drivers.html) and clicking Drivers & Downloads.
    In the search field, enter your product name or number, and then click Go. Select your operating system from the drop-down list under Select your operating system, and then click Next. If there are any available graphics drivers under Select a download below, click the plus sign next to Driver - Graphics, and then click the driver name. In the Download options and information window, click Download . Follow the onscreen directions to download the driver. Restart the computer.
    ~Lil.Liebe
    Clicking the white KUDOS THUMBS UP on the right is a way to say thanks!
    Click Accept as Solution on a reply that solves your issue to help others in search of answers.

  • Why has my music controls in the locked screen stopped working after upgrading to ios. 7.0.2?

    I cannot pause, advance track, etc with the in-control feature on ios 7. When my phone is locked and the music is playing, (ie. iTunes, podcasts or any other audio enabled app) the play controls do not work even when I access the in-control feature.  I remember this working after I updated. Now it's not. Anyone else had this issues or know a fix?

    I have the same issue. with iphone5 with iOS 7.0.2

  • PC Windows, Office 2010, Acrobat X Standard - how to configure Acrobat that PDF documents are generated in PDF version 1.4 by default for word and excel (already tried to change the pre-adjustment for word and excel)

    PC Windows 7 Pro
    Office 2010
    Acrobat X Standard
    Ich habe bereits in den Voreinstellungen von Acrobat X Standard für Word und Excel die Einstellungen dahingehend geändert, dass PDF Dateien mit der PDF Version 1.4 generiert werden - jedoch funktioniert dies nicht.

    Edit:
    The description above was erroneously written in german - sorry for that - please find the english description below:
    PC Windows 7 Pro
    Office 2010
    Acrobat X Standard
    I alrady tried to change the pre-adjustment in Acrobat X Standard for Word and Excel, that PDF files should be generated in PDF Version 1.4 out of these applications - but it did not work.

  • Aspire R7 572G touch screen stopped working after a windows 10 upgrade, pls help

    I did a windows 10 update, but to my dismay I lost my touchscreen functions. I checked the properties on MY COMPUTER and it now says, pen and touch input not supported. Help pls

    Hmmm.. I upgraded my R7 572G but my touch screen is ok. I'm not sure what you did. However, my problem was the screen does not auto-rotate in Windows 10. So I went to this folder to run as administrator to fix the auto rotate problem and it works. C:\OEM\Preload\FIXAUTOROTATE\EnableRotate.cmd

Maybe you are looking for

  • Problem with iTunes 11.1 0xE8000003 error, won't let me sync with iPhone 5

    I have downloaded new iTunes 11.1 (Windows) and when I try to sync it with my iPhone 5, 0xE8000003 error shows up. What can I do?

  • Fusion drive upgrade question (7200rpm?+SSD swap)

    If I choose the fusion drive upgrade while purchasing a mac mini, will the non SSD drive be upgraded to a 7200rpm drive as well? Also, I would love to replace the SSD of the fusion drive with a 3rd party 256 SSD that I already own, if that's even pos

  • 9802 with 9870 (serial comms) in Hybrid mode not working

    Hello, I am developing a project with several IO modules in FPGA and a 9870 RS232 module in Scan Engine so that I can use the VISA vis instead of custom FPGA code. This was all working well on a 9025 controller in a 9114 chassis. We just changed over

  • Best Scheme For Capturing For Best MPE Performance?

    So let's say I'm still capturing from MiniDV tape @ 720p24. What's the best scheme for capturing for best MPE performance? I have a new HP Z800 with (so far) one i7 4-core with 12 gigs of ram and an Nvidia GeForce GTX285. [moved from the FAQ forum]

  • Issues with Action Wizart to remove security

    Hi, I am using action wizard in Adobe11 to remove security from group of files, but it asks for password for every file and also prompts to save the file for each file. In earlier versions I used to do this with batch processing and it used to ask th