Screen Tearing - What do you think?

I just noticed on day two of my experience with my MBP that I have a 1 inch +/- vertical line in the middle right lower area of my screen that looks like a tearing effect only on the main desktop area. The funny thing that if I move a open window over the area it disappears. Also by changing the default wallpaper to any other wallpaper it disappears.
Should I take the MBP back for a replacement? What would you do?
TIA

That is also very unlikely to rectify the problem, but is also moot because firmware upgrades are one-way actions, as far as we’ve been able to determine here.
Here’s an interesting experiment to try: What happens when you take a screen snapshot of the affected area? If it captures the artifact, then that artifact must be been drawn into the frame buffer. If it does not, then the artifact is arising somewhere downstream, in the hardware that takes the frame buffer contents as generated by software and makes it visible on the screen.
Randall Schulz
iMac 20" Core Duo; MacBook Pro Mac OS X (10.4.6)

Similar Messages

Dear apple management, I have purchased I pad mini e few days ago. I need help as follows: (1) Camera: i did take a few photos but something has gone wrong. As i press the camera icon, I get a blank dark black screen. What do you think has gone wrong ?

Dear apple management, apple support communities
I have purchased I pad mini e few days ago. I need help as follows:
(1) Camera: i did take a few photos but something has gone wrong. As i press the camera icon, I get a blank dark black screen. What do you think has gone wrong ? HELP URGENTLY REQUIRED.
(2) How do i sync my pc with I pad mini?
(3)i can read on i pad mini file made in microsoft excel but all numbers are very different from the original document. What is the solutuon?
Dr Uma S Nayak
<Personal Information Edited by Host>

You are talking to fellow users on these forums, not iTunes Support or Apple - I've asked the hosts to remove your phone number from your post.
For the Camera app, try closing it via the taskbar and see if it works when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar at the bottom of the iPad's screen, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't fix it then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
In terms of syncing, you will need iTunes on your computer - if you haven't already downloaded it then you can do so from here : http://www.apple.com/itunes/download/
You can conncet the iPad to your computer and select it on the left-hand sidebar of your computer's iTunes (you can enable the sidebar on iTunes 11 on a PC via control-S), and use the tabs on the right-hand side of the iTunes screen to sycn your content to the iPad.
Syncing music : http://support.apple.com/kb/HT1351
Syncing apps : http://support.apple.com/kb/PH12315
If you haven't yet synced your iPad to your computer you may also find this page useful : https://discussions.apple.com/docs/DOC-3141
For the excel file, what app are you viewing/editing it in ? If the values are different then it may be that the app that you are using doesn't support all the formulas that are being used in the spreadsheet. Apps that 'support' excel documents include Apple's Numbers app, and from third-parties apps such as Documents To Go ('premium' version) and QuickOffice Pro HD.

What do you think of the gray linen background?

Apple has always been known for cool design. I'm surprised at the dull appearance of the gray linen background behind the login screen. What do you think of it? I know there is a hack for changing it, but perhaps if enough people complain, Apple could provide some easy to configure alternatives.

To each his/her own, but this is something I couldn't care less about. I'm at the login screen just for a second or two - to enter my password to login.

My I mac screen had a small green light on the lower left. on a black screen. the screen seemed unresponsive. When I re-srted the bong sounds but the wite screen never shows the apple - What do you think this means?

My I mac screen had a small green light on the lower left. on a black screen. the screen seemed unresponsive. When I re-srted the bong sounds but the wite screen never shows the apple - What do you think this means?

Welcome to the world of Mac. Some ‘light’ reading to help the transition. I don’t recommend trying to get through all of this at once.
A guide for switching to a Mac
Anatomy of a Mac
Mac Basics—Tutorials on using a Mac
Mac OS X keyboard shortcuts,
Mac Basics – Mac Find Out How
Mac Basics – Switching From Windows
Mac OS FAQ
MacTips,
Quick Assist
Switch Basics
Switching to Mac Superguide
Switching to the Mac: The Missing Manual, Mountain Lion Edition
Take Control E-books
Welcome to the Switch To A Mac Guides

What do you think of my Bash Script? What about the error checking?

Well what do you think of this Bash script
It works
I gave it some problems (i.e. unpluged the ethernet, messed up the URL's, uninstaled some programs...) to see if would report errors and stop or just keep going... But it did
I just kind of thought up a way to do some error checking with the commands that I know.....
What is a better way to do error checking?
What do you think I should add/Do to this script?
#!/bin/bash
# Shell script to make a USB Tumb Drive for Flashing BIOS on a Lenovo Ideapad Y510.
# This script needs to be owned and run as ROOT with the "sudo command"
# i.e. sudo usbbiosflasher
# If you have anyideas send me a PM on ubuntufourms.org my user name is HunterThomson
# Name/Rename this script usbbiosflasher and save it to the ~/home directory.
# Then run the command- chown root:root usbbiosflasher
# Then run the command- chmod 755 usbbiosflasher
# Then copy the script to the directory /usr/bin.
# Run this comand to do that- sudo cp ~/usbbiosflasher /usr/bin
# You also must have the program "mbr" installed
# You can install the mbr program by running this comand in the shell on Ubuntu
# sudo apt-get install mbr
# In Arch Linux you have to get it from Aur
# First you will need to know a few things...
# You will also need to know the Mount Point i.e. /media/disk and the /dev path i.e. /dev/sdb1.
# You can find these by using the df -T comand.
# Run df -T in the shell. Then plug in the USB Thumb Drive and run the df -T comand agin.
# The new listing is the USB Thumb Dirve.
# Also check to make sure the File System tipe is vFAT or FAT16 or FAT32.
# If it is not use gparted to format it to FAT32.
# I am farly certen that all USB Thumb drives come formated with FAT file system out of the BOX.
# You may want to fromat it anyway just to make sure.
echo "Interactive Shell Script to Make a USB Thumb Drive \for Flashing BIOS On a Lenovo Ideapad Y510"
echo ""
echo "You will need to have the program mbr installed"
echo "If you are on Ubuntu Linux you can retreve it form the repositories"
echo "If you are on Arch Linux you will need to get it from the Aur repository"
echo "Open anuther shell and \do that now..."
echo ""
verify="n"
while [ "$verify" != y ]
do
printf "Do you have mbr installed... yes or no?"
read AN1
echo ""
printf "You answered... $AN1 I have installed mbr. Is this correct... y or n?"
read verify
done
echo ""
if [ "$AN1" == "no" ]
then
echo "Install mbr now. Then run this script agin"
exit
else
echo "contunuing script"
fi
echo ""
# The next comand will make a directory to put needed files into. Note this file and everything init will be owned by root.
mkdir ~/usbbiosfiles && check1="yes"
if [ "$check1" = "yes" ]
then
echo "Made directory usbbiosfiles... OK"
else
echo "Could not \make directory usbbiosfiles"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
exit
fi
# The next two comands will get the FreeDOS file and the .ROM file.
cd ~/usbbiosfiles && checka="yes"
if [ "$checka" = "yes" ]
then
echo "Changing to the usbbiosfiles directory... OK"
else
echo "Could not Change to the usbbiosfiles directory"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
wget "http://www.fdos.org/bootdisks/autogen/FDOEM.144.gz" && check2="yes"
if [ "$check2" = "yes" ]
then
echo "Download of FreeDOS... OK"
else
echo "Could not Download FreeDOS"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
wget "http://ubuntuforums.org/attachment.php?attachmentid=78460&d=1216648756" && check3="yes"
if [ "$check3" = "yes" ]
then
echo "Download of the BIOS.ROM \file... OK"
else
echo "Could not Downlad the BIOS.ROM \file"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
# The next comand will name the .ROM file to the right name.
mv ~/usbbiosfiles/attachment.php?attachmentid=78460\&d=1216648756 ~/usbbiosfiles/06CN29WW.bios.update.tar.bz2 && check4="yes"
if [ "$check4" = "yes" ]
then
echo "Renameing of the BIOS.ROM \file... OK"
else
echo "Could not rename the BIOS.ROM \file"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
echo ""
# The next two comands set the variables. DEVX for the path i.e. /dev/xxx and MOUNTX for the mount point i.e. /media/xxx
verify="n"
while [ "$verify" != y ]
do
echo "You will need to know the Mount Point and the dev Path. You will also need to \make sure the File System \type is vFAT, FAT16 or FAT32."
echo ""
echo "With the USB Thumb Drive unpluged, Open another shell and run the comand df -T Then plug \in the USB Thumb Drive and run the comand df -T one \more time. The new device listed is the USB Thumb Drive. Note the Mount Point and The dev Path and the File system Type i.e. vFAT... If the File System \type is not vFAT, FAT16 or FAT32 you will need to fromat it with gparted. You may want to format the USB Thumb Drive anyway just to \make sure. In any \case delete all files and directorys on the USB drive before you go any ferther with this program."
echo ""
printf "Enter the dev path the USB Thumb Drive is at?"
read DEVX
echo ""
echo "Are you sure $DEVX is the dev path of the USB Thumb Drive... y or n?"
read verify
done
echo ""
verify="n"
while [ "$verify" != y ]
do
printf "What is the Mount Point of the USB Thumb Drive?"
read MOUNTX
echo ""
echo "Are you sure $MOUNTX is the Mount Point of the USB Drive... y or n?"
read verify
done
echo ""
install-mbr --enable A1 --partition 1 --force --timeout 0 $DEVX && check5="yes"
if [ "$check5" = "yes" ]
then
echo "Installing MBR on USB Thumb Dirve... OK"
else
echo "Could not install MBR on USB Thumb Drive"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
tar xjf ~/usbbiosfiles/*.tar.bz2 && check7="yes"
if [ "$check7" = "yes" ]
then
echo "Unpacking BIOS.ROM file... OK"
else
echo "Could not unpack BIOS.ROM file"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
gunzip ~/usbbiosfiles/FDOEM.144.gz && check8="yes"
if [ "$check8" = "yes" ]
then
echo "Unpacking FreeDOS files... OK"
else
echo "Could not unpack FreeDOS files"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
mkdir ~/usbbiosfiles/fdoem144 && check9="yes"
if [ "$check9" = "yes" ]
then
echo "Made directory fdoem144 in direcoty usbbiosfiles... OK"
echo ""
echo "Going to \sleep \for 5secs"
else
echo "Could not make directory fdoem144 in usbbiosfiles directory"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
modprobe loop && sleep 5 && check0="yes"
if [ "$check0" = "yes" ]
then
echo "Modprobeing loop... OK"
else
echo "Could not \modprobe loop"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
mount -o loop ~/usbbiosfiles/FDOEM.144 ~/usbbiosfiles/fdoem144 && check10="yes"
if [ "$check10" = "yes" ]
then
echo "Mounting FreeDOS on the fdoem144 directory... OK"
else
echo "Could not \mount FreeDOS on the fdoem144 directory"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
cp ~/usbbiosfiles/fdoem144/* $MOUNTX && check11="yes"
if [ "$check11" = "yes" ]
then
echo "Copying FreeDOS files to $MOUNTX... OK"
else
echo "Could not copy FreeDOS files to $MOUNTX"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
cp ~/usbbiosfiles/*.ROM $MOUNTX && check12="yes"
if [ "$check12" = "yes" ]
then
echo "Copying BIOS.ROM files to $MOUNTX... OK"
else
echo "Could not copy BIOS.ROM files to $MOUNTX"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
sync && check13="yes"
if [ "$check13" = "yes" ]
then
echo "Runing the syncing command... OK"
else
echo "Could not run the syncing command"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
umount ~/usbbiosfiles/fdoem144 && check14="yes"
if [ "$check14" = "yes" ]
then
echo "Unmounting of FreeDOS... OK"
else
echo "Could not unmount FreeDOS"
echo "Look above for errors or problems reported and fix the problem"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this script agin"
rm -r ~/usbbiosfiles
exit
fi
verify="n"
while [ "$verify" != y ]
do
printf "Do you see any errors... yes or no?"
read AN2
echo ""
printf "You answered... $AN2 to errors. Is this correct... y or n?"
read verify
done
echo ""
if [ "$AN2" == "yes" ]
then
echo "User Repoted... Error"
echo "Look above for errors or problems reported and fix the problem"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this script agin"
rm -r ~/usbbiosfiles
exit
else
echo "Success"
echo "I did a lot of error checking too and didnt find anything"
echo ""
echo "Go get a pen and paper to write down these instructions"
printf "Then hit the Enter to continue"
read WAIT
echo ""
echo "Now leave the USB Thumb Drive pluged into your computer and Reboot. When the Lenovo Logo POST screen appears hit F2 to enter the CMOS setup utility. Go over to BOOT tab and go down to HardDrive \(Not Boot Order) \then \select the USB Thumb Drive as the 1st hard drve. Then F10 and yes to save changes. Your compter will reboot agin. Then when the Lenovo Logo POST Screen appers on reboot hit F4 to enter the BIOS FLASHING program. The USB Thumb Drive will be seen as the C drive \in the list on the Left, Select it. Then \select the .ROM \file \in the list on the Right and start the BIOS FLASH. \(NOTE Your hart may stop beating... This is normal) Pray to any God you know of and your computer should restart just like normal. Hit F2 and the BIOS will now stay it is 06CN29WW. You will need to \set the boot order to the way you like it and other things \if you need to because they have been changed to the default."
fi
echo ""
echo "End of script"
Last edited by hunterthomson (2008-08-10 11:17:47)

Personally..... (this is just how I would have written it - if it works, then it's good enough for me though )
I would change this whole block:
verify="n"
while [ "$verify" != y ]
do
printf "Do you have mbr installed... yes or no?"
read AN1
echo ""
printf "You answered... $AN1 I have installed mbr. Is this correct... y or n?"
read verify
done
echo ""
if [ "$AN1" == "no" ]
then
echo "Install mbr now. Then run this script agin"
exit
else
echo "contunuing script"
fi
To this much shorter code:
MBR='/usr/bin/install-mbr' # Or where ever you expect it to be
if [ ! -x $MBR ] ; then
echo "mbr doesn't appear to be installed."
echo "If it is installed, check it's location, make sure it's executable and then make sure the MBR variable in this script is correct"
exit 1
fi
I wouldn't have used the checkXX variables for each stage:
mkdir ~/usbbiosfiles
if [ $? != 0 ] ; then
#failed
echo "Could not \make directory usbbiosfiles"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
exit 1
else
echo "Made directory usbbiosfiles... OK"
fi
There is an issue with the way you do your verifications - the user can never get out unless they answer 'y' or hit CTRL+C. Something like this gives them options:
verify="n"
while [ "$verify" != "y" && "$verify" != "n" ]; do
echo "You need to answer 'y'es or 'n'o"
read verify
echo $verify | tr "[:upper:]" "[:lower:]" # This converts the answer to lowercase so replies entered in upper case will still work
done
if [ $verify != 'y' ] ; then
exit 1
fi
One last thing I try to do in scripts... Declare all your binaries as variables at the start of the program, then execute the binary program by using the variable. For example:
# Binaries
TAR='/bin/tar'
CP='/bin/cp'
CHMOD='/bin/chmod'
# Execute tar and chmod the created file
$TAR cvzf /tmp/tarfile.tar.gz /etc/*.conf
$CHMOD 400 /etc/*.conf
This way, it's easy to change the path in future without having to hunt through the script if the paths change, and it also ensures you're calling the programs using the full paths to make sure you're not executing some strange variant or alias that someone has setup. If I use `chmod` 30 times in a script, and the path changes in the future or on a different system (`chmod` is a bad example cause it's highly unlikely to change, but you know what I mean), then all you need to do is update the variable at the start of the script, and it all works again without having to script-hunt and change it 30 times.

What did you think of iMovie '11?

I am thinking about buying a new mac but I'm only really concerned about the movie making software. I have used iMovie a few years ago and I liked it for the most part but I want some personal feedback on it. What did you think of the new software? What has changed in the last few years? Anything important that I should know?

Hi
If You last used iMovie HD6 then the change is severe - it's a compleately new tool.
If iMovie'08 or 09 the difference is not that great.
Some I listed as
*iMovie 09 (v8) 8.0.6 (jan 2009)*
• Far better than iMovie 08 but still far from good.
• Pic in pic, green screen but basic
• Image stabilization - fairly good for amateur use
• Speed-up/down and reverse
• Bl/W, Old age etc
• Still - No Continous TimeLine
• NO - Possibilities to enhanze by use of thirdpart Plug-ins (all investments lost)
• NO - Playback via Camera/FW - and this prevents 100% safteybackups and the use of an extra TV/Monitor as real-time Quality control (as in iM 1 to HD6)
Aimed at - speed editing small video projects to be presented on the Internet - NOT DVDs
*iMovie 11 (v9) 9.0.x*
• Will be - Intel Only
• Snow Leopard minimum Mac OS X.6.3
YES
• Advanced view including a true TimeLine ? Yes but rudimentary (very basic)
• True Storyboard - where You even can write and prepare space for lacking material that needs to be obtained or re-shoot. YES
• Better wave-form presentation of audio and audio tools - Rubberband - Yes
• Trailer creating tool
• ”Faces” as in iPhoto - NO - but this finds if there are people in some video-clips
• Better audio tools. Equalizer and a background audio reducer
• More Camera support eg 24fps
NO
• not 64-bit only
• The Playback to Camera via FW - returns ? NO
• Full Quality to iDVD - NO - still only half - every second line
• Plug-in facility ? - NO
• No free text tool
• Tool to mask an identity eg band over face or unsharp area. - NO (could be obtained via Plug-ins in iM HD6 and earlier)
• Animation tool - To point on interesting object/player - NO animations refere to a totally different
thing connected to Storyboard and insert of ”dummy animations” while building a movie
Yours Bengt W

Try to configure font. What do you think?

DejaVu installed as dependence and this is nice font. But I think Droid is better (or maybe you have any other idea about better font?).
Screenshot: http://i25.fastpic.ru/big/2011/0722/ec/ … 809aec.png
Left: default Droid;
Right: after something changes in ~/.fonts.conf.
What do you think?
DPI 96.0, 1024x768
Current ~/.fonts.conf (right on screen)
<?xml version="1.0"?>
<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
<fontconfig>
<match target="font">
<edit mode="assign" name="antialias">
<bool>true</bool>
</edit>
</match>
<match target="font">
<edit mode="assign" name="hinting">
<bool>true</bool>
</edit>
</match>
<match target="font">
<edit mode="assign" name="autohint">
<bool>true</bool>
</edit>
</match>
<match target="font">
<edit mode="assign" name="hintstyle">
<const>hintfull</const>
</edit>
</match>
<match target="font">
<edit mode="assign" name="rgba">
<const>rgb</const>
</edit>
</match>
<match target="font">
<edit mode="assign" name="lcdfilter">
<const>lcddefault</const>
</edit>
</match>
<alias>
<family>serif</family>
<prefer>
<family>Droid Serif</family>
</prefer>
</alias>
<alias>
<family>sans-serif</family>
<prefer>
<family>Droid Sans</family>
</prefer>
</alias>
<alias>
<family>monospace</family>
<prefer>
<family>Droid Sans Mono</family>
</prefer>
</alias>
</fontconfig>
Thanks.

Are you really asking people to tell you what the better font choice for your machine is?

What do you think about the html5?

I've been seeing developers philosophizing about the future, and I want to know what do you think about the brand new html5?
mainly because the html5 can take out of the market technology ( flex ).
thanks for the opinion!!!
[email protected]

Yep this is most definitely not just a rumor, I've found plenty of sources talking about this.
Here's someone's take on HTML5, a non-Adobe perspective, from a Silverlight developer. I thought this would be interesting to mention. Not sure I agree 100% with everything said (IE may not be most used browser and I don't believe in DRM), but it's an interesting read anyway:
Yes, you can do a LOT of stuff with HTML5 + JS that Silverlight is good for. But HTML5 will only reach Candidate Recommendation status in 2012 - if Silverlight keeps the current pace, it will be at V7 by then.
HTML5 will only get you approximately what Silverlight had at V1.0. A Canvas element, some video playback capabilites, and a Javascript programming model. Can you imagine how further advanced Silverlight 4 is at the moment?
Actually, scratch that - the video quality and availability of HTML5 is a lot worse than what Silverlight has to offer. There is no DRM, no Smooth Streaming, not even full screen! No GPU acceleration either. Even the codec HTML5 has to support is not standardized! This results in Firefox 3.6 having only Theora decoder, and Youtube experimenting with HTML in H.264 (on the same day FF3.6 launched), only playable in approx. 4-5% of the world's browsers.
Internet Explorer is still the most widely used browser on the web, and does not have HTML5. Currently, there are more Silverlight capable browsers browsing the web than HTML5 compatible ones. I don't think that in the next 3 years you will be able to create an HTML5 app and hope that at least 50% of the world's population can view it without switching browsers. (and remember: installing a plugin is a lot less hassle than switching to a new browser!)
HTML5 will not be truly cross-browser standard for quite a long time, if ever. There are too many things that the browser developer can do as they wish - just think about the aforementioned video codec issue. There are too many little differences in each browser's Javascript implementation to make it really portable.
The developer story: nothing in the HTML + JS world comes close to the awesome Visual Studio and Expression Blend tools. Javascript is cool for small apps, but cannot hold a candle to C# when it comes to serious development. Fighting with browser and OS incompatilities takes up a huge amount of time for any HTML website or web app - with Silverlight you don't have this.
Just compare what the best HTML / Ajax company in the world (Google) did with maps, and what MS did to see the difference. Go tohttp://maps.google.com/ (watch out - the Streetview part is in Flash, not Ajax), and compare it to http://www.bing.com/maps/explore/. That is the difference I am talking about.
Of course he means (or should have meant) Flex/Flash rather than just Flash. As for the GWT and other AJAX fanboys who I guess think browser compatibility problems are going to be a thing of the past (or won't be a drag on corporate bottom lines - haha), it makes you wonder what other wild fantasies they're envisioning for the future. Next they'll come and tell us XML-based protocols are going to be as fast as AMF...

Did you know that Verizonwireless is saving your checking account information when you pay your bill by check and then making it part of your "MyVerizon"? This means of course if they get hacked that information could be compromised. What do you think of

Did you know that Verizonwireless is saving your checking account information when you pay your bill by check and then making it part of your "MyVerizon" without you adding it? This means of course if they get hacked that information could be compromised. What do you think of this?

Credit card and debit card and checking and savings information is encrypted so it is possible to be hacked, but the odds are greater to get hit by the Love Boat then to have a wide scale hack.
Oh yes they do happen, Bank of America, Chase, Citibank, Target and quite a few others. But in all the years I have paid my invoice with saved card information I never been hacked.
You use good passwords and the risk is minimal.
Good Luck

Lack of SD card slots what do you think

I don't know about the rest of you, but I like my stuff on an SD card. Not in a cloud. It seems Motorola, Verizon, and android all want you to put your stuff in the cloud. I'm sorry but I like my privacy and I like to access my content even when I have no signal. The cloud is for morons who don't realize their stuff can be hacked. If the Pentagon can be hacked, so can the cloud. Verizon, give us the option. Quit force feeding us stuff that a bunch of techno geeks sitting around and dream up. I have been a loyal customer for years and your trying my patience. I like my Droid Razr MAXX HD. It has served me well for 2 years in some of the worst environments. It has never failed me and I think you hit the nail on the head when you introduced it. But you took a moronic stance and quit offering it. You got it right and then screwed it up. The only complaint I had was all the bloat ware. Give us the choice. We buy the phone, it is ours, we should be the ones to decide what stays and what goes. Not some ***** sitting in marketing. If you want to introduce it, then do so but allow the people the choice of what stays and what goes. It will cost you customers in the future if you don't, including me. Have a nice day!!!!

You ask "what do you think".
I think that your message would/will be better received if you didn't resort to name calling and "colorful" language.
You/we will never win the "argument" over what you term "bloatware". Verizon enters into financial agreements with the providers of that software to be able to install it on the devices. They make a lot of money (presumably) on this, so it is not likely to end.

Still in a quandary about hardware specs. What do you think?

I need to build a new system as editing machine for CS4. Everything is more or less clear as to what I need, there are only two issues remaining:
1. How much RAM to install, and
2. Disk setup.
As always there is the balance between performance and costs. Since this is not "an unlimited means available" type of machine, you will not see much esoteric components, like SSD raids or nVidia Quadro CX card. It is a dual E5472 Harpertown system (8 core), running Vista 64 Business.
1. How much RAM would be a good balance in price/performance? 8 or 16 GB? We are talking about Kingston Value Ram DDR2-6400 ECC FBDIMM, either 4 x 2 GB ( 420) or 4 x 4 GB ( 650), with the possibility to double memory in the future. If you do not make a habit of continuously switching between PP, AE, EN, PS etc. and are mainly using only 1 application at the time, I wonder if there is a noticeable performance gain to justify the additional cost. The choice is obvious if the total cost of the machine would not be stretching available means. So what do you think?
2. Main storage is 8 x WD Caviar Black 1 TB disks in raid50 for media, renders, scratch etc. But what about the boot disk? Either a 300 GB WD Velociraptor ( 240), or 4 x WD Scorpio (7200 RPM) 160 GB in raid10 ( 250), using on-board ESB2 chipset.
While we are at it, does it make sense to add 4 x WD Scorpio 250 GB in Raid5 (on an Areca ARC controller with free ports) only for pagefile, projects and temporary export. Final export will be transferred over the network to a burning machine for DVD's. Backups of projects is to external USB disks and on a separate machine over VPN.
The case has room for 8 hot swappable 3.5" disks and 8 hot swappable 2.5" laptop disks plus another disk and a DVD/BR burner internally. There are still 4 external eSATA ports available for future expansion. Foreseen video card is ATI 4870 512MB. Network is currently a 1 Gb connection, but can be enhanced to 2 Gb with 2 NIC's.
Look forward to your reactions.

Bill,
The case is the
Supermicro SC743TQ-865SQ
and the storage bay for the 2.5" disks is the
Addonics AE4RCS25NSA (2.5 Disk Array 4SA)
Thanks for your remark about the difficulty of troubleshooting boot arrays. That might be an advantage for the Velociraptor.
Dag, no. I don't make the mistake of visiting Amsterdam, unless it is absolutely necessary, like visiting the IBC, let alone visiting those bars. I came to realize that Vista has grown up a bit with SP1 and with full support for 64 it now makes a bit more sense than XP64. It does imply a couple of days tweaking Vista (= removing 'features') to make it work decently, but after that is accomplished I will make a slip streamed DVD version for future installs, so that is a one time investment. With recent enhancements in Nullsoft that is easily accomplished, including all intermediate patches and 'Patch Tuesday' versions.

I accidentally deleted my iPhoto when i empty my trash? i think 1year ago.i want it back but i heard that its difficult...my 2nd option is i'll buy iPhoto from apps. what do you think guys? thank you and god bless!

i accendentaly deleted my iphoto when i empty my trash. i think 1 year ago. i want it back but they say its difficult. now i think i'll buy iphoto to apps. what do you think guys??? ty and god bless!

A bunch of totally different questions
iPhoto is an application and it is in your applications folder - is it there? It must be in teh Applications folder on your boot drive - it can not be on an external drive
The photos are kept in the iPhoto library (by default and highly recommended) - is that what you deleted? It can be anyplace by by default it is in your pictrues folder
Time Machine is a backup program that backuse your your Mac - you do NOT directly access its backup files but you use the Time Machine application to restore files - see http://support.apple.com/kb/HT1427?viewlocale=en_US&locale=en_US for details
Your post is not at all clear as to what you have or what you want to do
If in fact you do have a copy of the photos on an external hard drive as you say you thikyou do them you launch iPhoto and import them to iPhoto (file menu import -- or drag them to the iPhoto icon in the Dock)
If you have a time machine backup of your iPhoto library and you want to use that then you launch TM and go to the time you wna tto restore from, select the iPhoto library and click restore
If the above does not cover what you have and what you want please post back with exact details of what you have and what you want to do
LN

My IPhone all of a sudden pops up saying sim card failed. I turn it off and turn it back on and it works but the next day it happens again. what do you think is wrong with it?

My IPhone all of a sudden pops up saying sim card failed. I turn it off and turn it back on and it works but the next day it happens again. what do you think is wrong with it?

Hello brittbend
Check out the article to further troubleshoot your SIM card issues with your iPhone.
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/TS4148
Regards,
-Norm G.

I have a question can you please add so the iphone also have 5 icon dock like the iPad have it would make my day easy as h..:) maby in the next update? What do you think?

I have a question can you please add so the iphone also have 5 icon dock like the iPad have it would make my day easy as h..:) maby in the next update? What do you think? What do everyone think?

I have a question can you please add so the iphone also have 5 icon dock like the iPad have it would make my day easy as h..:) maby in the next update? What do you think? What do everyone think?

Best IDE & Platform Configuration? What do you think?

What do you think the best IDE is out there? I want to compile and create applications as well as servlets and beans, but my focus would be on the beans, servlets, jsp, etc, the web stuff. Once I have the IDE for that, what is the best configuration for developing under that environment. For example I would like to use the the JavaMail API as well, and that is available for the J2EE. So I can install both the J2SE and J2EE SDK's right? Should I accept their default installation directories? Is it possible to move files, the .jar files for example over the to a single directory for centralization? Help, trying to get an understaning how to create a nice development environment. Simple, efficient, etc.
Thanks so much!!
Terry

I personally think Eclipse is outstanding. I used JBuilder for a while, but it insisted on formatting code the JBuilder way. Eclipse also has refactoring, which is a major bonus. Moving classes is now a few clicks instead of performing a search-replace on all your files. There are UML and dozens of other types of plug-in.
As far as setting-up your environment, I normally duplicate a web application's deployment. So, the external JAR's I need are in WEB-INF/lib. The IDE should take care of classpath issues, if you perform the initial project set-up properly. I would also learn Jakarta's Ant. It makes deployment a lot easier, at the expense of some up-front development.
- Saish
"My karma ran over your dogma." - Anon

Screen Tearing - What do you think?

Similar Messages

Maybe you are looking for