Screen transport error
Hi friends
screen object already transported to QA1 by some othe user and i have changed one of the screen field properties and trying to transport my changes to QA.
i am getting below transport error .
Main import
Transport request___: D10K945135
System______________: Q01
tp path : tp
Version and Release: 340.16.37 640
1 duplicate key error during insert into table D020T occured
1 duplicate key error during insert into table D021T occured
Main import
End date and time : 20080417225424
Ended with return code: ===> 8 <===
please help.
thanks
ramesh
Hi Sourabh,
thanks for your reply,, but i have not changed any table structure..
i feel we need to do adjust & activate once we change the table structure.in my case i have not changed table structure,, just i changed D02T tables entry.
when i change the screen field data type the table value will be changed not structure if i am not wrong.
so i am thinking adjust&actiate tables how can it help me to solve the transport error.
Thanks
Ramesh
Similar Messages
-
Error: ORA-16778: redo transport error for one or more databases
Hi all
I have 2 database servers"Primary database and physical standby" in test environment( before going to Production)
Before Dataguard broker configuration , DG setup was running fine , redo was being applied and archived on phy standby.
but while enabling configuration i got "Warning: ORA-16607: one or more databases have failed" listener.ora & tnsnames.ora are updated with global_name_DGMGRL
Please help me how can i resolve this issue .Thanks in advance.
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys
Password:
Connected.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database
show database
^
Syntax error before or at "end-of-line"
DGMGRL> remove configuration
Warning: ORA-16620: one or more databases could not be contacted for a delete operation
Removed configuration
DGMGRL> exit
[oracle@PRIM ~]$ connect sys/sys@prim as sysdba
bash: connect: command not found
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:30
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:48
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 08-OCT-2006 19:52:48
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PRIM_DGMGRLL" has 1 instance(s).
Instance "PRIM", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:46
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:59
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect /
Connected.
DGMGRL> create configuration test as
primary database is PRIM
connect identifier is PRIM
;Configuration "test" created with primary database "prim"
DGMGRL> add database STAN as
connect identifier is STAN
maintained as physical;Database "stan" added
DGMGRL> show configuration
Configuration
Name: test
Enabled: NO
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
DISABLED
DGMGRL> enable configuration
Enabled.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database verbose prim
Database
Name: prim
Role: PRIMARY
Enabled: YES
Intended State: ONLINE
Instance(s):
PRIM
Properties:
InitialConnectIdentifier = 'prim'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
LogFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'PRIM'
SidName = 'PRIM'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/PRIM/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "prim":
Error: ORA-16778: redo transport error for one or more databases
DGMGRL> show database verbose stan
Database
Name: stan
Role: PHYSICAL STANDBY
Enabled: YES
Intended State: ONLINE
Instance(s):
STAN
Properties:
InitialConnectIdentifier = 'stan'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
LogFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'STAND'
SidName = 'STAN'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=STAND)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/STAN/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
DGMGRL>This:
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
says that your network setup is not correct. You need to resolve that first.
As for Broker setup steps how about the doc or our Data Guard 11g Handbook?
It's 3 DGMGRL commands so I am not sure what 'steps' you need?
Larry -
i had to take my photoshop file into a hardrive because my dad was going to give me a new Mac and when things didn't work out and went back to my old one i use the time capsule thing to save everything before but didn't give me photoshop so i physically moved the file and tried to open it but then this error shows up
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error: 16
and when i click the uninstall app on the file it tells me this
The alias “Uninstall Adobe Photoshop CS6 2” can’t be opened because the original item can’t be found
and when i click fix alias i click on photoshop and the app just turns into photoshop and i just run in circles
please help thank youRun the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Download CS6 products
Mylenium -
Transport error while exporting swf to enterprise
Hi all,
OLD scenario : Server OS : Windows2003, BO XI3.1 Client OS : Windows XP , all BO lcient tools and Xcelsius 2008 ..system works fine in all respects
New Scenario : Server OS upgraded to Windows 2008 with out doing any modifications on the running applicaitions.
All client tools are able to connect to BO Application including designer, deski , importwizrd, webirichclient with EXCEPTION Xelcius 2008.
In Xcelsius 2008 with SP1 --> while tring to export to Business objects platform, upon giving username and password and authenticationi (any) ...waits for 3-4 sec ...pops up " Transport Error : Communication Failure" .... same error while importing also ..application is not getting response from server ...
pls guide ...thnx ..
.kishoreSorry for delayed update .The Issue is resolved after un-checking auto assign port to CMS and assigning port number manually.
-
No transport error while consuming WCF service in a REST way
Hi,
Here is a small article on when we usually face No Transport error and how to get rid of it.
I recently worked on a sample application using “app for Office” (New in Visual Studio 11.0)
What is “app for Office”?
An app for Office is basically a webpage that is hosted inside an Office client application. You can use apps to extend the functionality of a document, email message, meeting request, or appointment. Apps
can run in multiple environments and clients, including rich Office desktop clients, Office Web Apps, mobile browsers, and also on-premises and in the cloud.
What can an app for Office do?
An app for Office can do pretty much anything a webpage can do inside the browser, such as the following:
Provide an interactive UI and custom logic through JavaScript. (Develop UI using HTML and JavaScript)
Use JavaScript frameworks such as jQuery.
Connect to REST endpoints and web services via HTTP and AJAX.
Run server-side code or logic, if the page is implemented using a server-side scripting language such as ASP or PHP.
As “app for Office” doesn’t have an option to write server side scripting (unlike code behind or in-line coding feature in ASP.NET/MVC) we will have to go for web service or WCF service and consume the service
using any JavaScript framework like Jquery.
I wrote a simple WCF service to hook up with server side code and consumed the service using Jquery as follows
$(document).ready(function () {
$.ajax({
type: "GET",
url: "http://localhost/MyService.svc/rh/data?id=" + $('#sampleType').val(),
processData: false,
contentType: "application/json; charset=utf-8",
dataType: "json",
crossDomain: true,
success: function (data) {
alert(data)
error: function (xhr, status, error) {
alert(error);
I encountered an error saying “No Transport” when I executed the client application.
I did some investigation on this and found out the root cause that cross-domain request was disabled. But I was really not sure whether it was at my WCF service end or “app for Office” client end. I added
Client Access policy and Cross-domain-policy xml files to WCF service in order to enable cross-domain request
so that service will accept any type requests sent form different domains.
Client Access policy
<?xml version="1.0" encoding="utf-8" ?>
<access-policy>
<cross-domain-access>
<policy>
<allow-from http-request-headers="*">
<domain uri="*"/>
</allow-from>
<grant-to>
<resource include-subpaths="true" path="/"/>
</grant-to>
</policy>
</cross-domain-access>
</access-policy>
Cross-domain-policy
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-http-request-headers-from domain="*" headers="*"/>
</cross-domain-policy>
Both the policies should be in different XML files
But this didn’t solve my problem. After a little bit more investigation I found exactly where and how to enable-cross domain requests.
Solution
We need to enable cross-domain requests in environments that do not support cross-domain requests.
“Cors is equal to true if a browser can create an XMLHttpRequest object and if thatXMLHttpRequest
object has a withCredentials property. To enable cross-domain requests in environments that do not support cors yet but do allow cross-domain XHRrequests (windows gadget, etc), set $.support.cors = true;”
You just have to add jQuery.support.cors = true; in your client scripting and it works perfectly fine.
[Cors- Cross-Origin Resource Sharing]
A simple example:
$.support.cors = true;
$(document).ready(function () {
$.ajax({
type: "GET",
url: "http://localhost/MyService.svc/rh/data?id=" + $('#sampleType').val(),
processData: false,
contentType: "application/json; charset=utf-8",
dataType: "json",
crossDomain: true,
success: function (data) {
alert(data)
error: function (xhr, status, error) {
alert(error);
Hope this will be helpful.
ThanksThis is very good technich to resolve the problem. but this is not working in Google chrome or Firfox . can any one help me.
-
401 Unauthorized:HTTP transport error while calling external WSDL from BPEL
Hi,
I have simple BPEL process whic calls siebel WSDL file through partner link.
I have successfully compiled and deployed BPEL process, when i initiate the Process, instace got errored out at invoke activity.
Error Goes like this
"<remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>
exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException:
java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 401 Unauthorized</summary>
</part></remoteFault>"
Can anybody help on this issue, Could you please give me possible solution.
Thank youl.we have not provided any authentication credentials to XMLSpy, we have just uploaded siebel WSDL file then sent the SOAP request with some customer Id then we have received proper response with all desired customer data.
In the same way we tried to call same siebel WSDL file from BPEL process throgh partner link. errored instance has created with 401 unauthorised HTTP transport error..
Do you think is this probem at siebel application side?
We have deployed our BPEL process to SOA server which is having HTTP port 7777.
as per my investigation,i found that we have to open port from siebel side (which WSDL file we are calling) which matches with above HTTP port number.
Do you have any idea on this above clue? Please let us know more details on this. -
Hi all,
I am getting below error while invoking Siebel web service from BPEL service,
<fault>
-<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="summary">
<summary>
exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: oracle.j2ee.ws.saaj.ContentTypeException: Not a valid SOAP Content-Type: text/html; charset=UTF-8
</summary>
</part>
</remoteFault>
</fault
Please help me to resolve this issue.
Thanks,
Santosh M EResolved, I was invoking an external Web service which is an Asynchronous 2 way.
Didn't capture the reply back from the Async service. -
Transport Error from Dev to QA.
Hi All,
We r facing transport error while transporting req from Dev to QA,
Created queries in dev and try to trasport in QA.
Error:
Execution of programs after import (XPRA)
Transport request : BD1K922532
System : BQ1
tp path : tp
Version and release: 372.04.29 700
Execution of programs after import (XPRA)
End date and time : 20091022031634
Ended with return code: ===> 8 <==
what could be the reason?
Regards,
SDHi.
I have collected all neccessary object which query contains, but after releasing the request it shows the message,
The request contains message that have already been edited & transported to other projects. To avoid overshooter problem when importing you need to create dependency information for the request with which object were last transported. The requiered information is listed here together with the existing information.
Should i go ahed with above message???? Is there any dependency?
Regards,
SD -
Hi,
I am getting a transport error 12 while importing a request.
Some transports are getting transported while some are not and are ending up with error 12.
Here are the slog
ERROR BD1K902473 BP1 R 0012 20100114030753
STOP tp_getprots BP1 R 20100114030809
STOP EXECUTION OF REPORTS BP1 R 20100114030810
ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
STOP imp single BP1 0012 20100114030811
START imp single BP1 20100114030842
Regards,
VisshwasHere it is
STOP tp_getprots BP1 V 20100114002628 VENKATEV STRDS1502 20100114002456
STOP SET VERSION FLAGS BP1 V 20100114002629 VENKATEV STRDS1502 20100114002456
START EXECUTION OF REPORTS BP1 R 20100114002641 VENKATEV STRDS1502 20100114002456
START tp_getprots BP1 R 20100114002642 VENKATEV STRDS1502 20100114002456
STOP tp_getprots BP1 R 20100114002710 VENKATEV STRDS1502 20100114002456
STOP EXECUTION OF REPORTS BP1 R 20100114002711 VENKATEV STRDS1502 20100114002456
STOP imp single BP1 0008 20100114002712 VENKATEV STRDS1502 20100114002456
START INFORM SAP-SYSTEM OF BP1 Q 20100114002713 VENKATEV STRDS1502 20100114002456
START tp_getprots BP1 Q 20100114002713 VENKATEV STRDS1502 20100114002456
STOP tp_getprots BP1 Q 20100114002722 VENKATEV STRDS1502 20100114002456
STOP INFORM SAP-SYSTEM OF BP1 Q 20100114002723 VENKATEV STRDS1502 20100114002456
START imp single BP1 20100114004455 VENKATEV STRDS1502 20100114004453
INFO TBATG CONVERSION OF BP1 N not needed VENKATEV STRDS1502 20100114004453
START MOVE NAMETABS BP1 6 20100114004457 VENKATEV STRDS1502 20100114004453
START tp_getprots BP1 P 20100114004458 VENKATEV STRDS1502 20100114004453
STOP tp_getprots BP1 P 20100114004500 VENKATEV STRDS1502 20100114004453
STOP MOVE NAMETABS BP1 6 20100114004501 VENKATEV STRDS1502 20100114004453
START MAIN IMPORT BP1 I 20100114004502 VENKATEV STRDS1502 20100114004453
STOP MAIN IMPORT BP1 I 20100114005903 VENKATEV STRDS1502 20100114004453
INFO TBATG CREATION OF EN BP1 n not needed VENKATEV STRDS1502 20100114004453
START SET VERSION FLAGS BP1 V 20100114005908 VENKATEV STRDS1502 20100114004453
START tp_getprots BP1 V 20100114005911 VENKATEV STRDS1502 20100114004453
STOP tp_getprots BP1 V 20100114005936 VENKATEV STRDS1502 20100114004453
STOP SET VERSION FLAGS BP1 V 20100114005938 VENKATEV STRDS1502 20100114004453
START EXECUTION OF REPORTS BP1 R 20100114005947 VENKATEV STRDS1502 20100114004453
START tp_getprots BP1 R 20100114005949 VENKATEV STRDS1502 20100114004453
ERROR BD1K902473 BP1 R 0012 20100114010005 MANJUS VENKATEV STRDS1502 20100114004453
STOP tp_getprots BP1 R 20100114010041 VENKATEV STRDS1502 20100114004453
STOP EXECUTION OF REPORTS BP1 R 20100114010043 VENKATEV STRDS1502 20100114004453
ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
STOP imp single BP1 0012 20100114010049 VENKATEV STRDS1502 20100114004453
START imp single BP1 20100114010856 VENKATEV STRDS1502 20100114010848
INFO TBATG CONVERSION OF BP1 N not needed VENKATEV STRDS1502 20100114010848
START MOVE NAMETABS BP1 6 20100114010901 VENKATEV STRDS1502 20100114010848
START tp_getprots BP1 P 20100114010902 VENKATEV STRDS1502 20100114010848
STOP tp_getprots BP1 P 20100114010911 VENKATEV STRDS1502 20100114010848
STOP MOVE NAMETABS BP1 6 20100114010914 VENKATEV STRDS1502 20100114010848
START MAIN IMPORT BP1 I 20100114010917 VENKATEV STRDS1502 20100114010848
STOP MAIN IMPORT BP1 I 20100114011713 VENKATEV STRDS1502 20100114010848
INFO TBATG CREATION OF EN BP1 n not needed VENKATEV STRDS1502 20100114010848
START SET VERSION FLAGS BP1 V 20100114011724 VENKATEV STRDS1502 20100114010848
START tp_getprots BP1 V 20100114011725 VENKATEV STRDS1502 20100114010848
STOP tp_getprots BP1 V 20100114011730 VENKATEV STRDS1502 20100114010848
STOP SET VERSION FLAGS BP1 V 20100114011731 VENKATEV STRDS1502 20100114010848
START EXECUTION OF REPORTS BP1 R 20100114011741 VENKATEV STRDS1502 20100114010848
START tp_getprots BP1 R 20100114011741 VENKATEV STRDS1502 20100114010848
ERROR BD1K902473 BP1 R 0012 20100114011757 MANJUS VENKATEV STRDS1502 20100114010848
STOP tp_getprots BP1 R 20100114011816 VENKATEV STRDS1502 20100114010848
STOP EXECUTION OF REPORTS BP1 R 20100114011817 VENKATEV STRDS1502 20100114010848
ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
STOP imp single BP1 0012 20100114011819 VENKATEV STRDS1502 20100114010848
START imp single BP1 20100114013808 VENKATEV STRDS1502 20100114013757
INFO TBATG CONVERSION OF BP1 N not needed VENKATEV STRDS1502 20100114013757
START MOVE NAMETABS BP1 6 20100114013813 VENKATEV STRDS1502 20100114013757
START tp_getprots BP1 P 20100114013820 VENKATEV STRDS1502 20100114013757
STOP tp_getprots BP1 P 20100114013827 VENKATEV STRDS1502 20100114013757
STOP MOVE NAMETABS BP1 6 20100114013830 VENKATEV STRDS1502 20100114013757
START MAIN IMPORT BP1 I 20100114013836 VENKATEV STRDS1502 20100114013757
STOP MAIN IMPORT BP1 I 20100114015151 VENKATEV STRDS1502 20100114013757
INFO TBATG CREATION OF EN BP1 n not needed VENKATEV STRDS1502 20100114013757
START SET VERSION FLAGS BP1 V 20100114015157 VENKATEV STRDS1502 20100114013757
START tp_getprots BP1 V 20100114015200 VENKATEV STRDS1502 20100114013757
STOP tp_getprots BP1 V 20100114015211 VENKATEV STRDS1502 20100114013757
STOP SET VERSION FLAGS BP1 V 20100114015212 VENKATEV STRDS1502 20100114013757
START EXECUTION OF REPORTS BP1 R 20100114015216 VENKATEV STRDS1502 20100114013757
START tp_getprots BP1 R 20100114015217 VENKATEV STRDS1502 20100114013757
ERROR BD1K902473 BP1 R 0012 20100114015233 MANJUS VENKATEV STRDS1502 20100114013757
STOP tp_getprots BP1 R 20100114015253 VENKATEV STRDS1502 20100114013757
STOP EXECUTION OF REPORTS BP1 R 20100114015255 VENKATEV STRDS1502 20100114013757
ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
STOP imp single BP1 0012 20100114015256 VENKATEV STRDS1502 20100114013757
START imp single BP1 20100114020600 VENKATEV STRDS1502 20100114020557
INFO TBATG CONVERSION OF BP1 N not needed VENKATEV STRDS1502 20100114020557
START MOVE NAMETABS BP1 6 20100114020605 VENKATEV STRDS1502 20100114020557
START tp_getprots BP1 P 20100114020606 VENKATEV STRDS1502 20100114020557
STOP tp_getprots BP1 P 20100114020631 VENKATEV STRDS1502 20100114020557
STOP MOVE NAMETABS BP1 6 20100114020631 VENKATEV STRDS1502 20100114020557
START MAIN IMPORT BP1 I 20100114020634 VENKATEV STRDS1502 20100114020557
STOP MAIN IMPORT BP1 I 20100114021516 VENKATEV STRDS1502 20100114020557
INFO TBATG CREATION OF EN BP1 n not needed VENKATEV STRDS1502 20100114020557
START SET VERSION FLAGS BP1 V 20100114021525 VENKATEV STRDS1502 20100114020557
START tp_getprots BP1 V 20100114021526 VENKATEV STRDS1502 20100114020557
STOP tp_getprots BP1 V 20100114021536 VENKATEV STRDS1502 20100114020557
STOP SET VERSION FLAGS BP1 V 20100114021536 VENKATEV STRDS1502 20100114020557
START EXECUTION OF REPORTS BP1 R 20100114021550 VENKATEV STRDS1502 20100114020557
START tp_getprots BP1 R 20100114021550 VENKATEV STRDS1502 20100114020557
ERROR BD1K902473 BP1 R 0012 20100114021757 MANJUS VENKATEV STRDS1502 20100114020557
STOP tp_getprots BP1 R 20100114021820 VENKATEV STRDS1502 20100114020557
STOP EXECUTION OF REPORTS BP1 R 20100114021820 VENKATEV STRDS1502 20100114020557
ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
STOP imp single BP1 0012 20100114021822 VENKATEV STRDS1502 20100114020557
START imp single BP1 20100114025554 VENKATEV STRDS1502 20100114025552
INFO TBATG CONVERSION OF BP1 N not needed VENKATEV STRDS1502 20100114025552
START MOVE NAMETABS BP1 6 20100114025559 VENKATEV STRDS1502 20100114025552
START tp_getprots BP1 P 20100114025600 VENKATEV STRDS1502 20100114025552
STOP tp_getprots BP1 P 20100114025613 VENKATEV STRDS1502 20100114025552
STOP MOVE NAMETABS BP1 6 20100114025613 VENKATEV STRDS1502 20100114025552
START MAIN IMPORT BP1 I 20100114025615 VENKATEV STRDS1502 20100114025552
STOP MAIN IMPORT BP1 I 20100114030423 VENKATEV STRDS1502 20100114025552
INFO TBATG CREATION OF EN BP1 n not needed VENKATEV STRDS1502 20100114025552
START SET VERSION FLAGS BP1 V 20100114030432 VENKATEV STRDS1502 20100114025552
START tp_getprots BP1 V 20100114030433 VENKATEV STRDS1502 20100114025552
STOP tp_getprots BP1 V 20100114030438 VENKATEV STRDS1502 20100114025552
STOP SET VERSION FLAGS BP1 V 20100114030439 VENKATEV STRDS1502 20100114025552
START EXECUTION OF REPORTS BP1 R 20100114030447 VENKATEV STRDS1502 20100114025552
START tp_getprots BP1 R 20100114030448 VENKATEV STRDS1502 20100114025552
ERROR BD1K902473 BP1 R 0012 20100114030753 MANJUS VENKATEV STRDS1502 20100114025552
STOP tp_getprots BP1 R 20100114030809 VENKATEV STRDS1502 20100114025552
STOP EXECUTION OF REPORTS BP1 R 20100114030810 VENKATEV STRDS1502 20100114025552
ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
STOP imp single BP1 0012 20100114030811 VENKATEV STRDS1502 20100114025552
START imp single BP1 20100114030842 VENKATEV STRDS1502 20100114030839
INFO TBATG CONVERSION OF BP1 N not needed VENKATEV STRDS1502 20100114030839
START MOVE NAMETABS BP1 6 20100114030845 VENKATEV STRDS1502 20100114030839
START tp_getprots BP1 P 20100114030845 VENKATEV STRDS1502 20100114030839
STOP tp_getprots BP1 P 20100114030858 VENKATEV STRDS1502 20100114030839
STOP MOVE NAMETABS BP1 6 20100114030859 VENKATEV STRDS1502 20100114030839
START MAIN IMPORT BP1 I 20100114030901 VENKATEV STRDS1502 20100114030839
STOP MAIN IMPORT BP1 I 20100114030938 VENKATEV STRDS1502 20100114030839
INFO TBATG CREATION OF EN BP1 n not needed VENKATEV STRDS1502 20100114030839
START SET VERSION FLAGS BP1 V 20100114030951 VENKATEV STRDS1502 20100114030839
START tp_getprots BP1 V 20100114030952 VENKATEV STRDS1502 20100114030839
STOP tp_getprots BP1 V 20100114030956 VENKATEV STRDS1502 20100114030839
STOP SET VERSION FLAGS BP1 V 20100114030957 VENKATEV STRDS1502 20100114030839
START EXECUTION OF REPORTS BP1 R 20100114031008 VENKATEV STRDS1502 20100114030839
START tp_getprots BP1 R 20100114031009 VENKATEV STRDS1502 20100114030839
STOP tp_getprots BP1 R 20100114031020 VENKATEV STRDS1502 20100114030839
STOP EXECUTION OF REPORTS BP1 R 20100114031020 VENKATEV STRDS1502 20100114030839
STOP imp single BP1 0000 20100114031024 VENKATEV STRDS1502 20100114030839 -
Hi All,
I get the following Transport error when trying to transport 0Customer from BW Dev. to Quality.
Number range interval for characteristic 0CITY is missing
Message no. BRAIN049
Diagnosis
The interval for number range object BIM0000093 of characteristic 0CITY is missing. The interval is created automatically, when you run the system in the BW clients.
Procedure
Execute the corresponding action again in the BW clients, so that the interval is created automatically. Then you can drag numbers for the characteristic 0CITY to other clients.
I get similar error for 2 other attributes of 0Customer (Name and Street). Some of the attributes have been turned navigational. All are activated in Development.
Is there something i am missing?
George.Hi Roberto,
For City, name and street- the number range object entries (for SID'd) in Development system are:
No From number To number Number status Ext
01 0000000001 2000000000 0000000057
01 0000000001 2000000000 0000000196
01 0000000001 2000000000 0000000107
As per the error message and your reply, i went to SNRO and tried entering the objects: BIM0000093, BIM0000249 and BIM0000318 for the 3 Info objects and clicked the 'Number ranges' button. It appears like these number range objects do not exist.
George. -
Blue screen with error code and I have no recovery disks for HP Pavilion dv6-1260se
I have a HP Pavilion dv6-1260se with factory installed operating system of Vista. When booting up the computer, I receive a blue screen with this error message: STOP: c000021a {Fatal System Error}.
The verification of a KnownDLL failed. system process terminated unexpectedly with
a status of 0x0000221 (0x007fb9c0 0x00000000).
The system has been shut down.
I do not have recovery disks for this computer. I tried to order them but them seem to not be available. This is my daughter's computer. She says she started to have trouble after downloading Frost Wire (music share) and then she removed it. We tried going back to an earlier time and that didn't help and then the blue screen with error message appeared. What do I do now?
This question was solved.
View Solution.Hi,
Assuming your in the US, recovery discs are available to order for that model here. That may be the best option.
You should also be able to do a recovery without the discs as well. Take a look at this document: Recover Windows Vista Operating System Using HP Recovery, and look for the section Restore the PC to its original condition with the HP Recovery Manager if Windows Vista is not accessible. This should allow you to recover the PC.
R
Although I am an HP Employee, I am speaking for myself and not for HP. -
My macbook13in has a blue screen with error code 10813
my macbook 13in has a blue screen with error code 10813
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Restarting After a Blue Screen Stop Error
I have received a Blue Screen Stop Error on my Toshiba Satellite 5200 Series laptop.
I could report it here, in full, if that would be helpful. However, it begins by telling me to restart the machine but the unit's Power button is not allowing me to switch it off.
What action should I take ?Crikey ! Someone at another forum just told me to hold the button down for 5 seconds..... and it worked !
-
Satellite A350 - Blue screen with error message
When starting windows7, I am getting blue screen with error message 0x0000116.
Can anyone assist please?It looks like a graphic card driver is a trouble maker.Try to reinstall a graphic card driver in safe mode (f8 on startup). Read this article for information:
http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/eb584685-6b8b-4ad7-b6cc-ae5ee78095fb
It's for VISTA but should be the same for win 7 too. -
Blue screen fatal error messages - laptop always crashes and now won't even let me restore
My dv6920ea laptop has developed a fault and keeps crashing with blue screen errors, such as "IRQL_NOT_LESS_OR_EQUAL". The problem has become so bad that it happens everytime I turn the laptop on. The laptop ran "Windows memory diagnostic tool" which said that there was a hardware fault. I've tried running a full system recovery to factory setting but sometimes the laptop crashes, and when it doesn't it asks me to insert a windows disc, but my laptop didn't come with one. The laptop is a year and a half old. What can I do to fix this issue? I don't mind completely recovering the laptop to factory settings and I have most(!) of my files backed up.
Hello djbless,
You’re getting blue screens with error IRQL_NOT_LESS_OR_EQUAL.
Run diagnostics to make sure that you are not having a problem with any of the hardware.
Turn off the computer.
As you power it back on tap the F2 key. This will load hardware diagnostics.
Run the startup test.
Go to HP.com and update the drivers, there is a button that says Let HP scan your system for out-of-date and missing drivers and software
Here is a link to the updates.
Clicking the White Kudos star on the left is a way to say Thanks!
Let me know how everything goes.
Have a good day.
Maybe you are looking for
-
The hard drive on our laptop crashed and we took it to the apple store and they said we can transfer all files photos and videos over to another mac laptop via a special cable. We did that and everything for the two users transferred over to the oth
-
Using "Rebuild" changes some messages from READ to UNREAD?
I'm trying to get my Mail storage in order and read that using Mailbox>Rebuild would be a good step to fix any indexing problems. All goes swimmingly, or so it seems. Save for not being able to rebuild multiple folders at once, that is! In any event,
-
Database Adapter calling stored procedure with xmlDOM.DOMNODE input problem
Hi all, I have been asked to do a POC on using SOA suite to generate a web-service for several database stored procedure. A few of them can be done without a fuss. But I am now stuck with a stored procedure that has input and output as xmlDOM.DOMNODE
-
Exceptions handling for "submit of Insert Report "
Dear Experts, i need to handle Exception "syntax Error" when Submit the inserted report. i tried " try and Catch " but failed to catch Dump Error. for example: Data CODE TYPE TABLE OF String . APPEND 'REPORT ZDYN.'
-
T530 lcd image distortion​s - possibly from hinge?
Hi everybody, I am first time poster. I own a T530 and so far I am very satisfied with it - the best laptop I've had, better even then my previous Elitebook and Macbook pro. I am posting, because the LCD screen started to show image distortions when