Screen turned pink and white and added a passcode by itself

In the morning I was using my iPad 3rd generation and left it in my bag for the rest of the day then I took it out, I switched it on, and it was all purplish pink and white. In the beginning, the touchscreen worked, even though I coudn't see what I was doing. Then there were tiny stripes where i could see but they were inverted colors! Later on, it added a passcode by itself since i saw through the stripes. I tried hitting it on the back and restarting it but it wouldn't work! By the way, I use an Apple Smart cover and my friend said it could've been from the manet. PLEASE HELP!!!

I just had mine replaced and it is betterr than the original.
Holds the 3G signal better.
i bought one as soon as they came out, so there is probably a bit of a higher failure rate for the first models.
You are basically getting a new one and you have a year from the purchase to extend the warranty.
I would not give up my Ipad.
I look at laptops now and they seems like dinosaurs.
.

Similar Messages

TS2771 i updated my ipod ,but before it work completely the screen turn blue,then white and now it doesnt work even if it charge. So, what do i do? PLEASE ANSWER MY QUESTION PLEASE TELL ME WHAT TO DO

i updated my ipod ,but before it work completely the screen turn blue,then white and now it doesnt work even if it charge. So, what do i do? PLEASE ANSWER MY QUESTION PLEASE TELL ME WHAT TO DO so i todd what others did then i did it but it kept showing the apple sign and now turn to blue again the turn yellow now white. Apple please fix it i havent been able to be gone at all past few days because of this also tries to connect with my labtop didnt work whats up with it. for people who didnt update it wait until they fix it beleive me

it still blinking with the apple sign

My iMac turns on and about 10 mins later it glitches and freezes and then the screen turns blue/green/white

My iMac turns on fine, but about 10 minutes later I can't use the mouse as the whole thing freezes. Sometimes it continues to move the mouse for a while but then glitches the screen (see first image). After that my screen turns blue/green/white and even purple as a solid colour (second image - changes to a different colour). I'm wondering what the problem is and can I fix it myself?

I have a similar iMac.
1. Be sure you have 4 GB of RAM.
2. Create a new USER wih Admin Rights
3. Don't add anything to the start up sequence.
4. Update all your apps. This is a big problem. Do it.
5. Use Font Book and verify your fonts. Delete any broken fonts.
6. Download and install Applejack. If you have to force a restart, press and hold command s. A black screen will appear. Finally it will say something about Applejack. Type applejack and run #1 and #2. Restart.
Don't run Applejack outside of safe mode. (Command s)
Come back and let us know how it is working.
;-D
DL Applejack: https://www.macupdate.com/app/mac/15667/applejack

IPad's screen turned pink and flashing

All of a sudden, my iPad's screen turned pink. Tried resetting but did not help. The screen is now red/pink-ish and flashing. I, of course, did not drop it or anything like that.
Is this a hardware problem? is it fixable by a user?

I just had mine replaced and it is betterr than the original.
Holds the 3G signal better.
i bought one as soon as they came out, so there is probably a bit of a higher failure rate for the first models.
You are basically getting a new one and you have a year from the purchase to extend the warranty.
I would not give up my Ipad.
I look at laptops now and they seems like dinosaurs.
.

TS3408 When I open safari from the dock it opens as a small window at the top of the screen that is totally white and does not have a tool bar or exit options. All I can do is force quit to exit. What do I do?

When I open safari from the dock it opens as a small window at the top of the screen that is totally white and does not have a tool bar or exit options. All I can do is force quit to exit. What do I do?

With Safari open, press Command , (comma) to open Safari Preferences then select the Extensions tab.
Turn that off, quit (or force quit) Safari then relaunch to test.

Apple macbook pro with retina display is having yellow screen problems in which screen is not perfectly white and is yellowish. More over the service frm apple's part is ridiculous as they have faulty spare part. Does ne1 hv email of senior person?

Apple macbook pro with retina display is having yellow screen problems in which screen is not perfectly white and is yellowish. More over the service frm apple's part is ridiculous as they have faulty spare part. Does ne1 hv email of senior person?

Apple service centre employee told me that they do not have this 14 day offer in India.
And My mac book pro is taken in by Service centre people to run test etc and I will be informed the next day if they accept it as a fault or not ?
I feeling ridiculously bad.

Watching Movies: iPod to TV- black and white and split screen. Help?

I have this cable: http://www.radioshack.com/product/index.jsp?productId=2994604
As you can see, the chord colors on that cable are red, green, and white. The places where the chords go in on my DVD player are yellow, red, and white. As you can tell, they don't go up. I connected them so the audio works fine, but the movie shows up ONLY in black and white, and the screen is split right down the middle. On my iPod, the 'Video Setting' do not fix this. I also have the iPod Classic 80 GB, for reference.
Help?

Toggle between PAL and NTSC on video setting.

How can I turn a picture black and white and keep some objects in color?

I have seen some pictures that are black and white, and a few objects (flowers, dresses, hair bows, etc) were in their original color. I was told you could do it with Photoshop, but I cannot figure out how. Any advice would be greatly appreciated!

The easiest way to do this (and there are lots of ways) is to create a hue/saturation adjustment layer above your base image. In the dialogue box, push the saturation slider all the way to the left. This will make what you see monochrome. Now select a brush and click on the layer mask next to the layer you just created. When you paint on the mask in black, you will block the desaturation effect of the layer and reveal the original color on the layer below. Paint in white to reverse this effect.
Bob Warren

I have imported a color picture and trying to use the adjustment brush to turn the background black and white and it isn't working. I have Lightroom 5. Any suggestions?

Hello - I have Lightroom 5. I have imported a color photo. I am trying to use the Adjustment Brush to change the background to Black and White and leave a portion of the photo in color. When I begin painting the photo with the Saturation at -100 I don't see any changes to the photo. I push the "O" key and still nothing. I have tried to reset the photo, restarted Lightroom and still nothing. Please help.

Set Flow and Density of the brush to 100
Reduce it where you want the effect to blend.
Bruce

[Solved] AppleTV Screen turns pink during boot

I got my AppleTV and a Broadcom Crystal HD card, but everytime Arch boots the screen turns pink (...). It happens when it starts loading the modules (there's a flicker on the screen). I have tried all three nVidia drivers - the OSS nv and nouveau ones, and the proprietary one. Adding 'nomodeset' to the GRUB config doesn't help any (and I understood xf86-video-nv doesn't have KMS support at all anyway). I tried both the 190 and 173 series of the nVidia drivers. Since the AppleTV software works fine (and the atv-bootloader environment and Arch boot sequence until it starts loading kernel modules are the regular white on black), I think it is a driver problem. However, Google isn't telling me anything specific. I know the chip is a GeForce Go 7300.
Suggestions are welcome.

Thanks. After taking the plunge once more - Ubuntu 9.10 netboot - I found out the pink hue disappears somehow... Don't ask what happened :-/. When I saw that I put Arch back on and behold, it works fine now . Maybe it was something HDMI-related.

Picture black and white and upside down in sequence

Hi!
I am new at this and I just installed the Premiere Pro CS6 and I got it working, yay!! I imported a clip and in the preview it looks fine but when I place it in the sequence and look at it it becomes black and white and is upside down. How do I fix that?? (I´m not sure about the if the terms I use here are the right ones, hope you understand me)
Thank you!!

What are you editing, and does your project match your video?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/
And, for the future, you need to provide more information when you ask a question
See the Information FAQ http://forums.adobe.com/message/4200840

I own a iphone 5 the camera in photo mode showing black and white and pictures

My iphone 5 camera in photo mode showing black and white and pictures are captured in black and white only.how to make it in colour mode

Do you have a filter turned on?

I created a new collection and put all of my same photos in them as a previous collection, then I changed them to black and white and both collections changed. How do I keep the first collection colour and make the second collection black and white.

I created a new collection and put all of my same photos in them as a previous collection, then I changed them to black and white and both collections changed. How do I keep the first collection colour and make the second collection black and white.

For the second collection, choose the option to make virtual copies. Then you can turn the virtual copies to black & white, leaving the first collection in color. If you want file copies of the B & W images you can export copies.

How to make a movie half black and white and half color

Is there a way to take a full color video and make half of the video black and white and the other half full color? For instance imagine a line down the center of the video, on the left the video is black and white, on the right side it's full color. Taking that concept if an object or person moves from the left to the right side of the screen, thus crossing that invisible line they automatically switch from black and white to color.
Almost like a video mask overlay.. Is that possible in iMovie?

When I do that it only makes a short portion (the top video) color somehow it shortens the clip to 2 seconds, I tried to edit for the full 47 second clip (just a sample to play with) but it keeps going back to 2 seconds for the top video.
Any other ideas? I do have Final Cut Pro as well as Adobe After Effects as well, but I just figured iMovie would be easiest way to do this simple effect...

How do I make one part of a picture black and white and rest color?

I am working on new campaign for Vi-spring orange county. I need to take a photograph of a woman with a bare back sitting on a mattress and make part of the picture in black and white and the other part in color. I then need to insert an outline of a spine on top in a bright color. I would really appreciate some help on how to start.

I think what we need is a little more information.
When you say you want to make part of the image black and white, do you want to make certain areas of the image black and white or just do away with certain colors in the photo. You can do a selective color and get rid of all but one color ie. A red rose in a green field, take out all the green in the image and the red in the rose is the only thing that has color. Or you can take out one color and leave the rest of the colors in, so basically the oppsite of what I just explained.
If you want certain sections of a image black and white ie. a room with a bed in it make the whole room black and white and keep the bed in color...you need to look into masking.
If you want to do masking I can find you a tutorial for it, but I need to know if i'm on the right track.

Screen turned pink and white and added a passcode by itself

Similar Messages

Maybe you are looking for