Screen turns black during video call on Xperia Z
Me too....i am using xperia z....any update on this matter.
alexrx - I was not sure what the test is supposed to do.When I clicked on the Proximity Test in the meny I got a black screen that said "Proximity switch ON". It did not change if moving the phone around.
I did not know where the proximity sensor was located - but a little google helped me along. For others who might find this post - it is located in the upper left corner. Having a screen protector covering the sensor I decided to remove that and it seems to work now. So a dirty screen protector seems to have been the root cause of the issue.
Thank you for pointing me in the right direction :-D (I wish the guy at the Sony support chat had been able to do the same...)
Similar Messages
-
Ok I had this problem before, took it to Apple..They fixed it. Now my computer it doing this again! I had a couple windows open, then all of a sudden my screen turns black. The keyboard light was still on though. So I think the computer may have gone into sleep mode?! Can someone comment on this? Then I pressed the power button to shut the computer off. I tried to restart it. I got to the login page, typed my password. Everything looked fine. Then I tried opening safari and the computer screen turned black again.
"Ok I had this problem before, took it to Apple..They fixed it. Now my computer it doing this again!"
Take MBP back to the repair shop & tell them it's still "broke." If the original repairs were done under warranty, I would call Apple Care first so that they can research your +original repair case number.+
Have you checked your Energy Saver settings? -
Webcam Randomly Turning Off During Video Calls
During a video call, my video will randomly stop. I can start it again without problem, but would love to figure out why this is occurring, so that I can stop it from happening. My video is showing perfectly fine in the Audio/Video settings.
The camera is showing as a FaceTime HD Camera. I'm on Yosemite 10.10.1 with Skype version 7.0 (653).
Has anybody experienced this before and know how to fix it?Thank you! I'm glad I'm not alone. I've had my pre for about 6 weeks and I love it. So... I bought an INVISI-SHIELD for over $20 at Best Buy. Then the flickering and blank screens started a few days later. The only difference was the new protective, invisible, EXPENSIVE piece of plastic - so I trim it back to just the face (assuming it was a side sensor glitch) but it still didn't stop it. So I peeled off the skin tonight and it seems to be fine... for the time being.
A WARNING would've been nice before I spent my money. I want to be reimbursed by Sprint! Thanks community - it was nice to get help from YOU! -
Does the screen turn black during an Apple Hardware Test?
My iMac screen has started turning black randomly. I searched the forums for advice about what to do an have tried
1. Unplugging everything and rebooting after waiting a while.
2. Resetting PRam (3 times.)
3. Running AHT.
The last test is running at the moment and I set it to Extended mode having noted that the test would probably take over an hour to complete. After five minutes the screen went black and I'm wondering how to tell when the test is complete and if this is normal procedure or a result of the original problem.
I know that the test is still running because I just heard a fan briefly surge, but pressing the keyboard or clicking the mouse does not wake the display.
Will I get some audible indication when the test is done, and if not how should I proceed since the only way to shut the computer down seems to be to hold the Power button for an extended time, or to pull the plug. If I have to resort to these options is there a way to view whatever results the AHT test determined?
Thanks for any help.Thanks for responding. Could you say whether or not I can expect a notification of the end of the test. I had to shut down the computer using the power button because the screen remained black 90 minutes after the test started. I couldn't see any results for the test I did.
If this pattern continues would you try reinstalling the OS before sending it off for repair? -
I cant see myself on the screen during video calls...
I cant see myself on the screen during video calls on Windows. What I have to do?
When you are on a video call, you may see a very small picture-in-picture window (thumbnail size). This is the picture of yourself. Click on it and it will be enlarged.
-
My MBP recently has the "Service Battery" notice, but disappears after I charged my laptop and hasn't returned yet. Also, my screen turns black once in awhile when I am watching videos, but cannot get it back lit so I have to restart it.
Do I really need to "service my battery?" And what do I have to do in regards to my scrren turning black?Service Battery means replace battery as soon as possible.
Occasional black screen problem may be related to the battery condition.
You may have to take the computer to the Apple store to have it checked out.
Power related issues can be resolved often by resetting SMC.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best. -
Screen turns black after loading services
Hi
After an update with pacman, then screen of my laptop turns black during boot. At first the screen is working, showing the services that are loaded. Then it turns black. In a flash it shows the messages again, but then it stays black. This happens both in the multi-user.target and in the graphical.target.
I tried:
1) Downgrade the nouvaux driver
2) Full system update
3) Switch from nouvaux to nvida driver
4) Uninstall gdm
But this did not help.
The graphics card is a nvidia GT 650
Below are the folowing log files:
1) pacman.log
What could I try to get the screen working?
Cheers,
Sjoerd
1) pacman.log
[2013-11-10 15:08] [PACMAN] Running 'pacman -Suy'
[2013-11-10 15:08] [PACMAN] synchronizing package lists
[2013-11-10 15:08] [PACMAN] starting full system upgrade
[2013-11-10 15:08] [PACMAN] upgraded bluez (5.9-1 -> 5.10-3)
[2013-11-10 15:08] [PACMAN] upgraded bluez-libs (5.9-1 -> 5.10-3)
[2013-11-10 15:08] [PACMAN] upgraded bluez-utils (5.9-1 -> 5.10-3)
[2013-11-10 15:08] [PACMAN] upgraded gvfs (1.18.2-1 -> 1.18.3-1)
[2013-11-10 15:08] [PACMAN] upgraded imagemagick (6.8.7.4-2 -> 6.8.7.5-1)
[2013-11-10 15:08] [PACMAN] upgraded openssl (1.0.1.e-4 -> 1.0.1.e-5)
[2013-11-10 15:08] [PACMAN] upgraded openssh (6.3p1-1 -> 6.4p1-1)
[2013-11-10 15:08] [PACMAN] upgraded phonon-vlc (0.7.0-1 -> 0.7.0-2)
[2013-11-10 15:08] [PACMAN] upgraded xcb-proto (1.8-2 -> 1.9-1)
[2013-11-10 15:08] [PACMAN] upgraded xf86-video-nouveau (1.0.9-1 -> 1.0.10-1)
[2013-11-10 21:12] [PACMAN] Running 'pacman -S lsof'
[2013-11-10 21:12] [PACMAN] installed lsof (4.87-2)
[2013-11-10 21:31] [PACMAN] Running '/usr/bin/pacman -S --asdeps wine-silverlight ttf-ms-fonts python2-pyxattr wine-browser-installer lib32-openal lib32-mpg123 lib32-libpng12 lib32-libxcomposite'
[2013-11-10 21:38] [PACMAN] Running '/usr/bin/pacman -S --asdeps lib32-gettext lib32-glu lib32-attr'
[2013-11-10 21:38] [PACMAN] installed lib32-attr (2.4.47-1)
[2013-11-10 21:38] [PACMAN] installed lib32-acl (2.2.52-2)
[2013-11-10 21:38] [PACMAN] installed lib32-gettext (0.18.3.1-1)
[2013-11-10 21:38] [PACMAN] installed lib32-glu (9.0.0-2)
[2013-11-10 21:38] [PACMAN] Running '/usr/bin/pacman -S --asdeps fontforge prelink gcc-multilib>=4.5.0-2 lib32-giflib lib32-gnutls lib32-libxinerama lib32-libxcomposite lib32-libxmu lib32-libxml2 lib32-libldap lib32-lcms lib32-mpg123 lib32-openal lib32-libcl samba opencl-headers'
[2013-11-10 21:40] [PACMAN] removed gcc-libs (4.8.2-3)
[2013-11-10 21:40] [PACMAN] removed binutils (2.23.2-3)
[2013-11-10 21:40] [PACMAN] removed gcc (4.8.2-3)
[2013-11-10 21:40] [PACMAN] installed libxkbui (1.0.2-5)
[2013-11-10 21:40] [PACMAN] installed fontforge (20120731_b-6)
[2013-11-10 21:40] [PACMAN] installed prelink (20130503-1)
[2013-11-10 21:40] [PACMAN] installed gcc-libs-multilib (4.8.2-3)
[2013-11-10 21:40] [PACMAN] installed binutils-multilib (2.23.2-3)
[2013-11-10 21:40] [PACMAN] installed gcc-multilib (4.8.2-3)
[2013-11-10 21:40] [PACMAN] installed lib32-giflib (5.0.4-1)
[2013-11-10 21:40] [PACMAN] installed lib32-gmp (5.1.3-1)
[2013-11-10 21:40] [PACMAN] installed lib32-nettle (2.7.1-1)
[2013-11-10 21:40] [PACMAN] installed lib32-libtasn1 (3.3-1)
[2013-11-10 21:40] [PACMAN] installed lib32-p11-kit (0.20.1-1)
[2013-11-10 21:40] [PACMAN] installed lib32-gnutls (3.2.6-1)
[2013-11-10 21:40] [PACMAN] installed lib32-libxinerama (1.1.3-1)
[2013-11-10 21:40] [PACMAN] installed lib32-libxcomposite (0.4.4-1)
[2013-11-10 21:40] [PACMAN] installed lib32-libxt (1.1.4-1)
[2013-11-10 21:40] [PACMAN] installed lib32-libxmu (1.1.2-1)
[2013-11-10 21:40] [PACMAN] installed lib32-ncurses (5.9-2)
[2013-11-10 21:40] [PACMAN] installed lib32-readline (6.2.004-1)
[2013-11-10 21:40] [PACMAN] installed lib32-libxml2 (2.9.1-1)
[2013-11-10 21:40] [PACMAN] installed lib32-libldap (2.4.37-1)
[2013-11-10 21:40] [PACMAN] installed lib32-lcms (1.19-4)
[2013-11-10 21:40] [PACMAN] installed lib32-libltdl (2.4.2-11)
[2013-11-10 21:40] [PACMAN] installed lib32-mpg123 (1.16.0-1)
[2013-11-10 21:40] [PACMAN] installed lib32-openal (1.15.1-1)
[2013-11-10 21:40] [PACMAN] installed lib32-libcl (1.1-1)
[2013-11-10 21:40] [PACMAN] installed gamin (0.1.10-8)
[2013-11-10 21:40] [PACMAN] installed iniparser (3.1-4)
[2013-11-10 21:40] [PACMAN] installed samba (4.1.0-1)
[2013-11-10 21:40] [PACMAN] installed opencl-headers (2:1.1.20110526-1)
[2013-11-10 21:41] [PACMAN] Running '/usr/bin/pacman -S --asdeps ttf-ms-fonts'
[2013-11-10 21:42] [PACMAN] Running 'pacman -U ttf-ms-fonts-2.0-10-any.pkg.tar.xz'
[2013-11-10 21:42] [ALPM-SCRIPTLET] Updating font cache... done.
[2013-11-10 21:42] [PACMAN] installed ttf-ms-fonts (2.0-10)
[2013-11-13 21:01] [PACMAN] Running 'pacman -U /var/cache/pacman/pkg/xf86-video-nouveau-1.0.9-1-x86_64.pkg.tar.xz'
[2013-11-13 21:03] [PACMAN] Running 'pacman -U /var/cache/pacman/pkg/xf86-video-nouveau-1.0.9-1-x86_64.pkg.tar.xz'
[2013-11-13 21:03] [PACMAN] downgraded xf86-video-nouveau (1.0.10-1 -> 1.0.9-1)
2) Xorg0.log
#2)
[ 4.198]
X.Org X Server 1.14.4
Release Date: 2013-10-31
[ 4.198] X Protocol Version 11, Revision 0
[ 4.198] Build Operating System: Linux 3.11.6-1-ARCH x86_64
[ 4.198] Current Operating System: Linux zen 3.12.0-1-ARCH #1 SMP PREEMPT Wed Nov 6 09:06:27 CET 2013 x86_64
[ 4.198] Kernel command line: vmlinuz-arch.efi root=/dev/md125p3 ro rootfstype=ext4 systemd.unit=graphical.target init=/usr/lib/systemd/systemd initrd=\EFI\arch\initramfs-arch.img
[ 4.198] Build Date: 01 November 2013 05:10:48PM
[ 4.198]
[ 4.198] Current version of pixman: 0.32.2
[ 4.198] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 4.198] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.198] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 16 14:35:54 2013
[ 4.202] (==) Using config file: "/etc/X11/xorg.conf"
[ 4.202] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4.207] (==) ServerLayout "Layout0"
[ 4.207] (**) |-->Screen "Screen0" (0)
[ 4.207] (**) | |-->Monitor "Monitor0"
[ 4.208] (**) | |-->Device "Device0"
[ 4.208] (**) |-->Input Device "Keyboard0"
[ 4.208] (**) |-->Input Device "Mouse0"
[ 4.208] (==) Automatically adding devices
[ 4.208] (==) Automatically enabling devices
[ 4.208] (==) Automatically adding GPU devices
[ 4.215] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 4.215] Entry deleted from font path.
[ 4.223] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 4.223] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4.223] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 4.223] (WW) Disabling Keyboard0
[ 4.223] (WW) Disabling Mouse0
[ 4.223] (II) Loader magic: 0x7fdc20
[ 4.223] (II) Module ABI versions:
[ 4.223] X.Org ANSI C Emulation: 0.4
[ 4.223] X.Org Video Driver: 14.1
[ 4.223] X.Org XInput driver : 19.1
[ 4.223] X.Org Server Extension : 7.0
[ 4.223] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 4.223] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4.224] (--) PCI:*(0:0:2:0) 8086:0166:1043:15a7 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 4.224] (--) PCI: (0:1:0:0) 10de:0fd1:1043:15a7 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 4.225] Initializing built-in extension Generic Event Extension
[ 4.225] Initializing built-in extension SHAPE
[ 4.225] Initializing built-in extension MIT-SHM
[ 4.225] Initializing built-in extension XInputExtension
[ 4.225] Initializing built-in extension XTEST
[ 4.225] Initializing built-in extension BIG-REQUESTS
[ 4.225] Initializing built-in extension SYNC
[ 4.225] Initializing built-in extension XKEYBOARD
[ 4.225] Initializing built-in extension XC-MISC
[ 4.225] Initializing built-in extension SECURITY
[ 4.225] Initializing built-in extension XINERAMA
[ 4.225] Initializing built-in extension XFIXES
[ 4.225] Initializing built-in extension RENDER
[ 4.225] Initializing built-in extension RANDR
[ 4.225] Initializing built-in extension COMPOSITE
[ 4.225] Initializing built-in extension DAMAGE
[ 4.225] Initializing built-in extension MIT-SCREEN-SAVER
[ 4.225] Initializing built-in extension DOUBLE-BUFFER
[ 4.225] Initializing built-in extension RECORD
[ 4.225] Initializing built-in extension DPMS
[ 4.225] Initializing built-in extension X-Resource
[ 4.225] Initializing built-in extension XVideo
[ 4.225] Initializing built-in extension XVideo-MotionCompensation
[ 4.225] Initializing built-in extension XFree86-VidModeExtension
[ 4.225] Initializing built-in extension XFree86-DGA
[ 4.225] Initializing built-in extension XFree86-DRI
[ 4.225] Initializing built-in extension DRI2
[ 4.225] (II) LoadModule: "glx"
[ 4.238] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.299] (II) Module glx: vendor="NVIDIA Corporation"
[ 4.299] compiled for 4.0.2, module version = 1.0.0
[ 4.299] Module class: X.Org Server Extension
[ 4.299] (II) NVIDIA GLX Module 331.20 Wed Oct 30 17:36:48 PDT 2013
[ 4.300] Loading extension GLX
[ 4.300] (II) LoadModule: "nvidia"
[ 4.301] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 4.307] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4.307] compiled for 4.0.2, module version = 1.0.0
[ 4.307] Module class: X.Org Video Driver
[ 4.309] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
[ 4.309] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4.309] (++) using VT number 1
[ 4.309] (EE) No devices detected.
[ 4.309] (EE)
Fatal server error:
[ 4.309] (EE) no screens found(EE)
[ 4.309] (EE)
Please consult the The X.Org Foundation support
at [url]http://wiki.x.org[/url]
for help.
[ 4.309] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 4.309] (EE)
Last edited by sjdh (2013-11-17 07:02:12)sjdh, please edit your post.
When posting configs, code or command output, please use [ code ] tags https://bbs.archlinux.org/help.php#bbcode
like this
It makes the code more readable and - in case of longer listings - more convenient to scroll through. -
Why does my screen turn black when I play iTunes while working on iPhoto?
Why does my screen turn black when I play ITunes while working on iPhoto? I can't click off of the screen but get a message that reads Shut down computer by pressing button in back then turn computer back on by pushing button in back. That's followed by Chinese letters (which I cannot read). I have had other problems when playing iTunes (actually, a radio station on the Internet) while working on iPhoto. Before, I got a window that would pop up and tell me I had no disk space available, that I would have to quit applications that were open. Not many were open.
It would be nice if I could solve this problem once and for all.
Thanks in advance for all the suggestions. I truly appreciate your help.
JanThat was easy. Thanks. Jan
Interval Since Last Panic Report: 1949305 sec
Panics Since Last Report: 1
Thu Feb 6 15:29:32 2014
panic(cpu 1 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81d89ff3, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff7acd4a2a7c, CR3: 0x0000000085d3b000, CR4: 0x0000000000000660
RAX: 0xffffffff4bffff56, RBX: 0x0000000000000000, RCX: 0x0000000000000001, RDX: 0x0000000000000000
RSP: 0xffffff807867b7c0, RBP: 0xffffff807867b800, RSI: 0xffffff7acd4a2a7c, RDI: 0xffffff8065292000
R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0xffffff7f81d44200, R11: 0xffffff800f8b45e8
R12: 0xffffff8065292000, R13: 0xffffff807867b860, R14: 0x0000000000000001, R15: 0xffffff7acd4a2a7c
RFL: 0x0000000000010286, RIP: 0xffffff7f81d89ff3, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff7acd4a2a7c, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff807867b470 : 0xffffff8000220792
0xffffff807867b4f0 : 0xffffff80002c4794
0xffffff807867b6a0 : 0xffffff80002da55d
0xffffff807867b6c0 : 0xffffff7f81d89ff3
0xffffff807867b800 : 0xffffff7f81d8a694
0xffffff807867b890 : 0xffffff7f81d8b4ed
0xffffff807867b8d0 : 0xffffff7f81d472a1
0xffffff807867ba40 : 0xffffff7f81d8bd6d
0xffffff807867bb00 : 0xffffff7f81d44346
0xffffff807867bb60 : 0xffffff8000655f3e
0xffffff807867bb80 : 0xffffff800065681a
0xffffff807867bbe0 : 0xffffff8000656fbb
0xffffff807867bd20 : 0xffffff80002a3f08
0xffffff807867be20 : 0xffffff8000223096
0xffffff807867be50 : 0xffffff80002148a9
0xffffff807867beb0 : 0xffffff800021bbd8
0xffffff807867bf10 : 0xffffff80002af140
0xffffff807867bfb0 : 0xffffff80002dab5e
Kernel Extensions in backtrace:
com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81d390 00->0xffffff7f81dfbfff
dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 b0000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f8089e000
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8082b000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80865000
BSD process name corresponding to current thread: iPhoto
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: iMac10,1 (Mac-F2268CC8)
System uptime in nanoseconds: 11526391261403
last loaded kext at 23020191300: com.apple.driver.AppleHWSensor 1.9.5d0 (addr 0xffffff7f8234b000, size 28672)
last unloaded kext at 522057763087: com.apple.driver.AppleFileSystemDriver 13 (addr 0xffffff7f8254c000, size 12288)
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleBluetoothMultitouch 70.12
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AGPM 100.12.75
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.GeForce 7.3.2
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBCardReader 3.0.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Atheros40 505.67.1
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.nvenet 2.0.17
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleUSBOHCI 5.1.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.driver.AppleMultitouchDriver 231.4
com.apple.driver.IOBluetoothHIDDriver 4.0.8f17
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.nvidia.nv50hal 7.3.2
com.apple.NVDAResman 7.3.2
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.1
com.apple.iokit.IOUSBMassStorageClass 3.0.3
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
System Profile:
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.52f9
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.67.5-P2P
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: ST3500418ASQ, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GA11N
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 3
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0x26200000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1003, 0x06400000 / 3
USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x020b, 0x06430000 / 4
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 6 -
Screen Goes Black During Startup (after login)
Hello,
I have a 2005 Mac Mini PPC OS 10.4.11. This is the first problem I've had since purchasing the computer. This problem popped up out of nowhere. The screen goes black during startup just after I login into my account. I can hear the hard drive spin like it is finishing the startup process. The monitor power button blinks green.
I'm using the digital video cable. I tried switching to the VGA cable but the screen then goes black before the login screen.
The computer will startup in Safe mode.
I've tried Disk Utility (repair disk and repair permissions), Techtool Pro, Drive Genius, ColorSync Utility, Reset Pram, installed latest OS updates, and even re-installed the System twice (once because I removed all the Extension files and then the computer would not startup at all).
I've also tried removing cache files, plist files, startup files, preference files, and some or all of extension files.
The only applications I have recently installed were QuickTime Pro and a .flv movie player; both about a week before this problem started. I tried to uninstall them but could not figure out how.
What is the problem? How can this be fixed?
Thanks.
RichardHowdy. I have Had the same problem as you in regards to a ViewSonic Monitor and the Mac Mini. This is my post:
Monitor failure when switching resolutions
Using Displays with the Mac mini, Apr 1, 2008, Replies: 2
Running 10.5.2 on Mac Mini G4 1.42 Ghz with ATI Radeon 9200, 32 MB VRAM and ViewSonic VX922
When switching resolutions from 1280x1024 to 800x600 or vice versa, the monitor will cut to black and the power light on the monitor switches from solid green to flashing green. Only by combinations of powering down the mini and starting it up again with the monitor on or off will bring the monitor back to life. This problem makes it difficult to play World of Warcraft amongst other games. Any feedback in regards to this problem would be appreciated.
Thank You!
At this point, I am unable to switch Monitor resolutions. If I do, the monitor goes black, and I have to power everything down and wait a while before I can restart.
I've resigned myself to not switching resolutions, but I'm wondering if you've had any luck.
Thanks for your time!
Kevin -
Screen turned black and makes some sort of an alarm sound
Does anyone knows a solutions for this: my intel iMac was on all afternoon till suddenly the screen turns black and it starts making some sort of an alarm sound "tuut tuuut". I tried restarting but nothing changes. I tried restarting from the installation Disc with C-key but no result. As a matter of fact i can't even get the disc out of my iMac anymore. Thanx
That sounds like hardware problems, I suggest you call your local Apple Store to my an appointment for them to check it out for you.
-
The screen turns black by itself
Hi,
I'm from Brazil, so please disregard my bad english (I hope you understand );
Well, I've one Toshiba L645, and recently it screen turns black (do not turn off, just stop shine) when something heavy is running (NBA 2k13 for example), and i've no idea about what's happening, when I close it (the game) the screen shines again.
Please, can you help me, at least an idea about that.
Thank you.The screen could be going black for several reasons. It could be that the Screen Saver is turning on and stopping the video. Check your Screen Saver settings and make sure that the Screen Saver is turned off. It could be a bad or intermittent video cable between the system board and the LCD screen, but I don't think so since the screen comes back when you turn off the game. How would an intermittent video cable know when the game was being ended? It wouldn't so it can't be the cable. It could be that the computer's Sleep or Hibernation mode is turning on and turning off the screen. Check the Sleep and Hibernation settings in Control Panel under the Power Options Advanced Settings. Make sure for the testing that they are both turned off.
-
My iMac 17" screen turn black, any one able to provide solutions
My iMac 17" screen turn black when I relocation the computer, any one can provide solutions, thanks
Hello, Bernardneoh.
Thank you for visiting Apple Support Communities.
Here is a troubleshooting article that I would recommend going through when experiencing this issue.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Cheers,
Jason H. -
Ipad screen turned black in Safari.(only in Safari. other apps are working)
I was using Youtube through Safari. I clicked a video and made it full screen and then the screen turned black. It didn't show me the usual appearance of a video in Youtube.(the pause button, the progress of the video,etc) Although the games and the apps still work. I tried closing it first then opening it again. when i went back it still shows a black screen with the word Ipad and the time. Does anybody have ideas on how to put it back to its normal self? Please HELP!!!!
If this is happening using Safari it usually means that Safari has run out of internal Memory and crashes. One way to help Safari would be have as few tabs open as possible.
Note that the iPad 2 only has 512 MB of internal memory.
The later iPads have more:
iPad 3 - 1 GB
iPad 4 - 1 GB
iPad Air - 1 GB
iPad Air 2 - 2 GB -
Screen turns black when using selection tool like lasso
When I use a selection tool Ex. Lasso tool, parts of the screen turn black and sometimes flash.
OS, RAM, updated video card?
-
HT1338 My screen turns black automatically !
My screen turn black when i am using my IMac that i bought recently !
I still have a valid warrenty until october !
it turns black and i can still know that it is running because videos and other things still keep running with the screen black and i have to restart the computer or put the computer to sleep and wake it up so i can start working again but this happens 5-8 times after the first time it shuts off !
What should i do ?The startup disk may need repairing.
Use Lion Recovery
Maybe you are looking for
-
Xcode, how do you take an app from an idea to a data model, data structure, or class structure?
Hey everyone! I'm a beginner xcoder and computer engineering sophomore and have literally spent every hour of the past few weeks reading as much as I possibly can about becoming a developer. I've found plenty of documentation, and guides on how to do
-
How can I change a decorated JFrame to non-decorated JFrame?
I want to change a decorated JFrame to a non-decorated JFame. The frame already shown on the screen. How can I do this?
-
Lens correction filter doest work after hardware change
Hello, Since I reinstalled my computer from scratch after a hardware change (went from AMD GPU to an NVIDIA GPU) lens correction filter doesn't work anymore. I can open the tool, do the corrections but when I pusch apply, the tool is closed but the
-
select 'GMD_V',count(1) from DIFDWN.GMD_V; Error at line 0 ORA-01722: invalid number Hi, The above qry runs in two other schemas perfectly,but its throwing this error in one schema. what is cause of it
-
MY LAPTOP DIES NOT RECOGNIZE MY IPOD. AFTER ABOUT 20 MINUTES I GET A MESSAGE THAT SAYS MY IPOD HAS BEEN CORRUPTED AND NEEDS TO BE RESTORED. ALSO AFTER THE IPOD HAS BEEN CONNECTED TO THE COMPUTER THE IPOD WILL FREEZE. I AM ONLY ABLE TO USE IT AFTER TH