Screen turns black suddenly, then re-emerges within a second

Hi,
here's a new strange issue with my new Asus Eee PC: Recently, and perhaps it's because some updated packages, the screen turns black totally without warning, and shows up again as if nothing has happened. That is, no matter what I currently do, at any time the screen turns completely black (not even dark or something like that) for just a second, and appears again simply. Nothing strange can be noticed, my session just continues as if this didn't happen.
I haven't had any success finding the triggers for that behaviour, it seems so accidentally ... be it browsing the web, right after session startup and everything else. What I've noticed though is that it happens only a single time within a session and both on battery and on power.
Graphic chip is an Intel Mobile 945 GME, and I'll add my xorg.conf as soon as I can. Strangely, there is no note in Xorg.0.log either.
What I'm currently doing now is checking whether this also happens in a GNOME session. Sounds strange, but the first time I've noticed this behaviour is with Openbox, and the last days I was using only Openbox. Still I don't know whether Openbox might cause this problem.
I'd be very glad if someone could give me some hints on tracking down this issue. Perhaps this also happens at someone else's machine.
Gratefully,
Leye
EDIT
Alright, here's my xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "record"
Load "dri2"
Load "glx"
Load "dbe"
Load "extmod"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Option "AccelMethod" "exa"
Option "MigrationHeuristic" "greedy"
Option "DRI" "True"
Option "NoDDC" "True"
Option "XAANoOffscreenPixmaps" "True"
Option "EnablePageFlip" "True"
Option "RenderAccel" "True"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 945GME Express Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x600
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Last edited by Leye (2009-06-16 14:31:52)

Good to know that there are other people with the same issue as well. As long as I use Openbox, I've deactivated gnome-power-manager, though I hope this will go away with new updates. In the meantime, deactivating gnome-power-manager is o.k.
I don't know though what you should do if you rely on the whole GNOME desktop.

Similar Messages

  • I have some problems when turning on my iphone5.  The screen turns black and so white and when I start an app it suddenly turn itselves off.  This happens every time when I turn it on.  After I have turned it on several times it acts normal...Anyone??

    I have some problems when turning on my iphone 5.  The screen turns black and then white and the appli is red and when I finally get in and start an app it turnes itselves off.  This happens every time when I turn it on.  After I have turned it on several times it acts normal.... But something is wrong...Anyone???

    Try reset
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
    If no joy, restore backup using iTunes.
    Finally last attempt, rsetore as new and sync content back manually.

  • HT4061 I did install the OS7 on my Ipad yesterday, and right now, while browsing internet with safari, the screen turned black, and no way to return to normal

    I am lost: I did install iOS7 a couple of days ago, and right now, while browsing internet with Safari, the screen turned black suddenly, and I can't reactivate it anyway (buttons death, screen death)

    Thank you very much!
    During the minutes needed  looking for help, I decided to put the magnetic cover on the screen again, and I connected the iPad to the charger. Whe I did uncover the iPad now for a try with your tip (hold sleep and home buttons for about 10 seconds), it came to life again.
    Thank you.
    Best regards,
    Lorenzo

  • My ipod screen turned black how do i fix it

    My iPod screen turned black, but then it went back on and then it started showing werid lines and then turned back off. And now it wont turn on! HOW DO I FIX IT?

    If not successful try the remaining items of:
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • Just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

    just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

    I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
    When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
    I hope this helps you my friend!

  • Ipod touch screen went black and then started flashing. Then the turn off slide comes up.

    Ipod touch screen went black and then started flashing. Then the turn off slide comes up. Restored multiple times and didn't work. Ipod works with Itunes fine (can put music and podcasts on the ipod), but can't take songs off of the ipod. Using windows xp and everything is up to date. Any ideas of how to fix it?

    I didn't know that it was posted three times. My computer didn't say that it posted anything.
    My ipod still syncs to itunes and I can put podcasts and music on my ipod, but I can't delete songs after I put them on the ipod. When I try to delete songs I try to delete it from the main music list on the ipod. It's also doing all the other stuff that I posted before. The screen will go black and then the power off slider thing shows up for a few seconds, then it'll show the unlock slider bar. Then goes black again. It will also do that when I have the ipod unocked and changing songs or playing a game. I've restored it to the factory default/new ipod and it still does the same thing. I've uninstalled and reinstalled itunes and then restored it again to the factory default and it's still doing the same exact thing. I checked and my computer is up to date.

  • HT1349 i have just bought an ipad2 from usa. now i am in dia. i am a first timer user of ipad. i have charged for three hours, when i start iti.e. on the device it shows a plug in icon with itunes. then the screen turns black. i am not able to use the dev

    i have just bought an ipad2 from usa. now i am in india. i am a first timer user of ipad. i have charged for three hours, when i start iti.e. on the device it shows a plug in icon with itunes. then the screen turns black. i am not able to use the device. kindly help

    You need to plug the iPad into your computer that has iTunes installed on it, and activate it.
    The User Guide would be good for you to read:
    http://support.apple.com/manuals/#ipad

  • Accidentally cancelled my 5.1.1 update and now my screen shows the apple logo and then it turns black and then the logo over and over again i cant turn it on fully

    accidentally cancelled my 5.1.1 update and now my screen shows the apple logo and then it turns black and then the logo over and over again i cant turn it on fully

    Check out this Apple article -> iOS: Unable to update or restore
    Can you put the iPhone into recovery mode? Do you see an error number when trying to restore the iPhone?

  • My ipad was in the process of updating (ios7) while at the same time syncing with my laptop.  suddenly the screen turned black and after few seconds the new itune icon  appeared on the screen.  the same icon appears even after i reset it.

    I was updating my ipad (ios7) while syncing with my laptop.  suddenly the screen turned black and seconds later a huge itunes icon appeared on the screen.  the same icon appears and not the usual interface even after resetting it several times. 
    please explain whta's happening.
    thank you

    See Unable to Update or Restore  >   http://support.apple.com/kb/ht4097
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • (Mountain Lion) suddenly the screen turns black, and I have to use the switch to turn it on. And, the screen turns to zoom, and the only way to turn to normal is to close the window and start all over again?

    (Mountain Lion) suddenly the screen turns black, and I have to use the on/off switch to turn it on. And, the screen turns to zoom, and the only way to return to normal is to close the window and start all over again?

    Does the screen go black while you are using the machine? ...or after it has sat idle for a bit?
    If it happens while you're using the machine, check to see if a hot corner has been set for sleep. You can do that here: System Preferences > Desktop & Screen Saver > Screen Saver and click the button labelled "Hot Corners..." in the lower right.
    If it happens after a bit of idle time, that's normal sleep behavior. The delay can be adjusyed here: System Preferences > Energy Saver.
    In either case, pressing any key on the keyboard should bring it out of sleep.
    Re zooming -
    If this happens while in Safari, and you are using an Apple Magic Mouse, a default setting applicable to it is that a soft double-tap on the mouse will zoom the Safari window. A second double-tap will bring it back.
    If it is the entire screen that is zooming, Control plus scroll gesture on the mouse will zoom the whole screen. Repeat with the opposite scroll gesture to bring it back.

  • Today, my iPad2 wouldn't delete mail.  Then the screen turned black.  I turned the iPad2 off then on.  Got black screen.  Tried backing up to iTunes.  Got the message "iTunes cannot connect to this iPhone because unknown error occurred (OxE8000065).  Help

    Today, my iPad2 wouldn't delete mail.  Then the screen turned black.  I turned the iPad2 off then on.  Got black screen.  Tried backing up to iTunes.  Got the message "iTunes cannot connect to this iPhone because unknown error occurred (OxE8000065).  Help, please.

    Did you try restarting it by holding down the hold and lock button at the same time until you get the apple logo?  If you already tried that then you should try putting it in DFU mode and doing a restore by following these instructions- http://www.iclarified.com/entry/index.php?enid=1034

  • My phone started vibrating mutiple times last night and the screen went black, and then it stopped and now I dont know what to do.  How should I fix this problem because I cant turn it back on?

    My phone started vibrating mutiple times last night and the screen went black, and then it stopped and now I dont have a clue what to do.  How should I fix this problem because I cant turn it back on? I have only had my phone for 2 months.

    I also live an hr away from the Apple store, so its not the best thing to go there just to ask a question and find out what to do

  • Suddenly while working my screen turns black

    Lately, while working on different programs (email, pages, keynote, etc.), my screen turns black.  the keyboard and computer are on but it is annoying as I can't get the screen to go back on without turning off the computer. It's as if the computer went to sleep.  What's happening?

    Hi quantummonk,
    It sounds like your display may be going to sleep due to lack of mouse or keyboard activity while watching movies. If you have to type a password each time, you most likely also have the require password when waking from sleep option selected. You may find the following articles helpful:
    Apple Support: About Energy Saver sleep and idle modes in Mac OS X
    http://support.apple.com/kb/ht2412
    OS X Mavericks: General pane of Security & Privacy preferences
    http://support.apple.com/kb/PH14125
    Note: On portable Macs, you can set seperate Energy Saver preferences for when the computer is on or off charger power.
    Cheers,
    - Brenden

  • MBP has "Service Battery" then disappears. Also screen turns black once in awhile when watching videos.

    My MBP recently has the "Service Battery" notice, but disappears after I charged my laptop and hasn't returned yet. Also, my screen turns black once in awhile when I am watching videos, but cannot get it back lit so I have to restart it.
    Do I really need to "service my battery?" And what do I have to do in regards to my scrren turning black?

    Service Battery means replace battery as soon as possible.
    Occasional black screen problem may be related to the battery condition.
    You may have to take the computer to the Apple store to have it checked out.
    Power related issues can be  resolved often by resetting SMC.
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • The screen turns black and the computer stays on

    hi,
    Once in a while when I am on my beige power macintosh and it runs smoothly, it all of a suddenly stops what it is doing and the screen turns black. when I am on iTunes some times, the screen turns black but the music still plays. I unplug and replug the monitor in but it is still black. Here are my computer stats. Ram 320mb, OS 10.2.8, 8 gig hard drive, 6mb vram, built in video, USB & Firewire PCI cards, and an AV Personality Card w/ 28k Modem, Running 333 mhz, and I have tried 3 other mother boards

    Welcome Jarrett,
    The article implies that using a certain version or "build" of the 10.2.8 updater fixes the problem. No true. Almost everyone who's experienced it on a Beige G3 has used the preferred updater specified in that article.
    Not every Beige gets it. I had 640MB when I moved to 10.2.8 and it never hiccuped. However, I run video off a PCI accelerator card and, as Frank mentioned, the video issue seems to happen when you are using the logic board video port.
    If you can't get your computer to boot and run long enough to use Terminal, pop it open and pull RAM until its under 192MB. Then the computer should be stable long enough to do the fix. Then you can add the pulled RAM back.
    The good new is that everyone seems to have permanently fixed the problem by applying the Terminal procedure described.
    Allan

Maybe you are looking for

  • Adobe Edge Inspect App won't launch on MacBook Pro OSX 10.8.5

    Hi there, I can't get Edge Inspect to launch on my MacBook Pro. It works fine on my iMac with the same OS. We I click on the launcher icon nothing happens (it doesn't even bounce on the dock). Any idea what's causing this? Thank you, Giuseppe.

  • How to include a photo on an email in yahoo

    Hi, How do I pull a photo from iphotos and attach it to an email that I have written in yahoo ?

  • Report Painter - Urgent

    Dear All, I am creating a form to be used in report painter with the following: Transaction Code : FSI4 / FGI4 Library                : Financial Statement Key figures / Reporting for Table FAGLFLEXT In case of both the libraries mentioned above, we

  • Display profiles missing

    All of my display profiles are gone...any idea how I can get these back? 15" MacBook Pro 1.83 GHz   Mac OS X (10.4.9)  

  • Hp designjet 450c / windows 7

    we have updated a couple of our computer to windows 7 and use a hp designjet 450c and can't find a driver that is compatible with windows 7 is there a way to get it to work with windows 7? the owner wont buy a new plotter.