Screen turns off after a few minutes and needs to be closed then opened
hi, as the title suggests my powerbook screen turns off after a few minutes before my screensaver is set to come on and when i come back and press a key or move the pad it wont start up so i need to close the powerbook then open it up again for it to activate. its not a huge problem but my programs which connect to the internet seem to lose their connection when i open it up again. is this normal? is there a setting i can change?
thanks
ross
Is there a way to "disable" Standby, Suspend and Off just when watching movies (in fullscreen or not)? I want them to do what they usually do in all other cases.
Setting them to 0 in xorg.conf does the thing, but I need that functionality only when I'm wathing movies. Making a script that alters adjustments in xorg.conf isn't the best solution - you'd have to restart X every time you want to watch a movie .
Cheers,
Daniel
Similar Messages
-
Screen turns off after a few minutes of inactivity
Hi guys,
Not sure if this is a DE/X related problem or kernel.
Running KDE 4.2.4 and my monitor would switch off after a while of inactivity. I have disabled DPMS for the monitor and I've ensure that screensavers or power management in KDE is disabled. Where else can I look? I don't like this behavior. (irritating when watching a movie and the screen just powers down)Is there a way to "disable" Standby, Suspend and Off just when watching movies (in fullscreen or not)? I want them to do what they usually do in all other cases.
Setting them to 0 in xorg.conf does the thing, but I need that functionality only when I'm wathing movies. Making a script that alters adjustments in xorg.conf isn't the best solution - you'd have to restart X every time you want to watch a movie .
Cheers,
Daniel -
apple sign shows up and then turns off after a few seconds, and i can not connect to my itunes
I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.
-
HP Pavilion HPE h9-1120t Phoenix - PC Suddenly Starts Turning Off After a Few Minutes of Use
Had this computer since July 2012 and not even a hiccup. 4 days ago, the computer suddenly began turning off. It does not shut down, it turns off like the plug was pulled. When I restart I get the Windows improper shutdown message. There is no warning at all. No message like the computer is overheating. It will just happen when the computer is idle with no programs open.
When it shuts down, the power unit light goes out for about a minute then comes back on "green" and the computer can be restarted.
I have unplugged the power cord and relugged and it seems fine.
The computer is up to date on Windows updates and can be shut down normally.
I have taken off the cover and cleaned out all the dust and confirmed all the fans are running just like they should. I have left the cover off and the computer still shuts down.
Any ideas? Thanks.
Computer Specs:
HP Pavillion HPE h9-1120t Phoenix Desktop PC
Windows 7
3rd Gen Intel Core processor quad-core 3.5GHz 8MB Shared Cache
10GB DDR3 SDRAM
2TB hard drive
1GB DDR3 AMD Radeon 7670
Liquid Cooling
Blue Ray and DVD BurnerEveryone must be gone for the week for Thanksgiving. Can someone help?
Here is the latest: In SAFE MODE, the computer never shuts down all at once. It will stay on indefinately. I tried SYSTEM RESTORE to 3 previous versions all failed and the computer shuts down on it's own.
I checked the computer setup menu and all looked fine, even turned off OVERCLOCKING.
Did a reinstall of the factor Windows install and as soon as it gets to the point where it begins to initial settings (after I enter in the WiFi password), it shuts down on it's own.
Any ideas? Thanks. -
The camera app has a video feature on it and I tried to do a 20 min video but it seems to turn off after a few minutes. I tried twice with the same results. There is no info under settings or anywhere on time restraints. Does anyone have any suggestions please?
Sasabean-
I do not know if this is related to your problem, but there is a setting on the iPad called "Auto-Lock". Mine is set for 5 minutes. One of the options is Never. See Settings-General-Auto-Lock.
Fred -
iPad--third generation shuts off antenna/hotspot after a few minutes of non-use.
Happens in 3G and LTE VZ environment.
Turning hotspot off and on getsw things working again.
Does Apple have antenna on a timer so it shuts off after a few minutes?
Does this happen on Mini and Retina as well?
FLAGSTAFFLARFixed!
Two things together have restored connectivity.
1. I changed the name under Settings > General > About > Name from My Name's iPad to iPad of My Name. I read somewhere that iOS 7.0.1 or 7.0.2 (I forget which) sometimes had issues with apostrophes here. Easy enough to test.
2. I then reset (again) the APN settings under Settings > Cellular Data > APN Settings > Personal Hotspot and reentered our provider's info (APN, Username, Password) there.
I don't know WHY it worked, but the personal hotspot is now happily sharing (again) internet connectivity with my MacBook Pro. -
My ipod only goes to the apple screen and freezes then turns off after about a minute. Is this fixable?
Try a system reset. It's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc. -
hello sir my iphone screen turns off after using 2-5 minutes what would be the problem please help me out
To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the phone. If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
Use iTunes to restore your iOS device to factory settings - Apple Support
Find an Apple Authorized Service Provider
iPhone - Contact Support - Apple Support -
Why does my nano keep turning off after a few seconds while I'm listening to my music? It's fully charged and brand new.
I've tried everything in the article "Troubleshooting iTunes for Windows Vista and Windows 7 video playback performance issues''. Here are my results.
My computer meets the requirements.
All software (Windows, iTunes and QuickTime) are up to date.
As for updating my drivers, I found nothing labeled 'Video'. The closest thing I found in Computer/Manage/Device Manager was to click + next to 'Display Adapters' under that I found 'Intel (R) HD Graphics Family' which I right-cicked. From the menu, instead of 'Properties', I selected 'Update Driver Software...', then I selected 'Search Automatically for updated driver software'. I saw the messages "Searching for Software... Searching online for Software... The best driver software for your device is already installed. Windows has determined the driver software for your device is up to date." I got these same messages when I searched for updated audio drivers.
My computer is already at the highest display resolution. (1366 x 768 recommended) That's as high as my resolution will go. Hmm, I noticed the article's example shows '(1920 x1080 recommended)'. Is my max 1366 x 768 resolution high enough?
As for QuickTime, deselecting 'Enable Direct3D video acceleration' had no effect. Disabling the DirectX entirely (Safe mode (GDI only)) allowed the audio to play, but there was no video, only a black screen.
As for turning on DMA, the only item under 'IDE ATA/ATAPI controllers' is 'Intel Mobile Express Chipset SATA AHCI Controller' So I right-clicked, selected 'Properties'. There's no 'Advanced Settings' tab in there. The tabs are 'General, Drivers, Details, Resources' no 'Advanced Settings' anywhere. So much for that.
'Readyboost' was already set at 'Do not use'.
No 'NVIDIA nForce Serial ATA (SATA) controllers' exist in my computer.
The problem still exists. Please help. -
for the iphone4, my light is on all the time! the light is supposed to turn off after a few seconds of use. how can i fix this?
If what Allen says does not fix the issue I have seen this as a Hardware issue and I would get into an Apple Store if it is close by
http://concierge.apple.com/reservation/us/en/ -
I downloaded an album and every single song is cut off after about a minute and a half.
I downloaded an album and every single song is cut off after about a minute and a half. I checked the Help information, but there isn't a button visible to download it again. How can I fix that?
I have a problem too - may be related to this. I downloaded 5 albums over the weekend, plus a few singles. Every one of them has at least 1 song that stops playing partway through, some as quickly as 5 seconds in. Looking at the file itself, the size seems right for a song of that length, and I got no errors during download, but out of the ~75 songs I purchased over the weekend, I have 10 (so far, still checking) that are incomplete
-
I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting. -
Does not turn off after a few seconds
My iPhone does not automatically turn off after a few seconds. This new behavior. Is there a setting for this?
Yes, Settings>General>Auto-Lock
-
I cancelled my OS lion download after a few minutes and told them I do not want it and they have not put the credit back on my account. I reported the problem and have heard nothing after a week. How do you get to talk to the "Store"
Amazingly the credit has appeared. Thanks to someone.
-
Why does my ipod randomly turn off after 5-10 minutes of use?
Why does my ipod randomly turn off after 5-10 minutes of use? Is the battery defective?
I figured it out. Headphones were not plugged all the way in. This support community is awesome. Thanks everyone.
Maybe you are looking for
-
How do you change the view for the timeline in a movie
not sure in new version how to do it
-
FlexUnit4 - Tests run but runner has to be manually closed and no reports generated.
I am trying out FlexUnit4 and using ant to build the tests. I built my ant script on the one from the FlexUnit4SampleCIProject. The test from that project run, the runner automatically closes and the reports are generated, my project however does not
-
How to control Adobe Software Updates
Hello All, A user reported an issue with software updates for the Creative Cloud Suite, it's not support for the update I am asking for I wanted to ask if there is a way of controlling all Adobe Software updates for my network. Similar to how you can
-
11.2g Installation error on Win7: ORA-12638 Credential Retrieval Failed
I'm attempting to install an Oracle instance on my computer, which is Windows 7, 64-bit. In the middle of the installation I got an error fro Credential Retrieval. I've looked for solutions and they all related to modifying sqlnet.ora. However, at th
-
Getting the HTTP server name, port and context name inside the init()
I have a servlet which is initialized when the Web server comes up. Is there any way I can print the complete URL from this servlet? I am aware that this can be done by using request object. But note that in this case, there is no request object. All