Screen user exit : program sapmv45a screen 8309
Hi,
I added fields to screen 8309 , but in the flow logic of the screen 8309 system is not allowing any code(call modules) to write ( i already given the access key and designed the screen) .
when i searched forums i came to one command
*{ INSERT "TR No" 1
module XXXX.
*} INSERT
i could not understand the above command .......
Ram
Hi,
the code for screen Validation has to write in Include 'MV45AFZZ'.
Search for the T-code VA01--Check for form routine ""userexit_field_modification
" and add your manual code..
Regards,
Prabhudas
Similar Messages
-
Screen /user exit for additional screen on sales order header
Hello sir's,
can anybody help me for this query---
Screen /user exit for additional screen on sales order header.
exit name.
Thanks in advance,
VikramHi,
SAP has provided screen modification. This you can do on "Additional data B" screen at both <b>header</b> and line iteam level.
Additional <b>header data is on screen SAPMV45A 0309</b>, additional item data on screen SAPMV45A 0459. These screens contain the <b>Include screens SAPMV45A 8309 ( this is the screen exit at header )</b> or SAPMV45A 8459 ( this is the screen exit at item ) as user exits. There few more exits you will have to code to get this screen works. The are,
MV45AOZZ - PBO module of screen
MV45AIZZ - PAI module of screen
MV45ATZZ - Global data definition for user-exit.
Check this link for more info regarding user-exit in sales docs.
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/frameset.htm
We have alredy implemented this solution at line item level. Let me know if you have any question.
Regards,
RS -
How to find the user exit for a screen..
Hi,
plz help me how to find the user exit for a screen..?
Regards
AnbuHi,
check this program this will give you the list of user-exit and BADI for the perticular Tcode.
REPORT zuserexit_badi.
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name EQ enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object IN ('SMOD', 'SXSD')
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(105) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
SORT jtab BY object.
DATA : wf_txt(60) TYPE c,
wf_smod TYPE i ,
wf_badi TYPE i ,
wf_object2(30) TYPE c.
CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT jtab INTO wa_tadir.
AT FIRST.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Enhancement/ Business Add-in',
41 sy-vline ,
42 'Description',
105 sy-vline.
WRITE:/(105) sy-uline.
ENDAT.
CLEAR wf_txt.
AT NEW object.
IF wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
ELSEIF wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
ENDIF.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 sy-vline,
2 wf_object2,
105 sy-vline.
ENDAT.
CASE wa_tadir-object.
WHEN 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE modtext INTO wf_txt
FROM modsapt
WHERE sprsl = sy-langu
AND name = wa_tadir-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WHEN 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
SELECT SINGLE text INTO wf_txt
FROM sxs_attrt
WHERE sprsl = sy-langu
AND exit_name = wa_tadir-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
ENDCASE.
WRITE:/1 sy-vline,
2 wa_tadir-obj_name HOTSPOT ON,
41 sy-vline ,
42 wf_txt,
105 sy-vline.
AT END OF object.
WRITE : /(105) sy-uline.
ENDAT.
ENDLOOP.
WRITE:/(105) sy-uline.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
WHEN 'SMOD'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
WHEN 'SXSD'.
SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Reagards,
Bharat. -
Create Custom screen - User Exit.
Hi All,
As i am new to the USER-EXIT and SCREEN-EXIT, I want how to create new custom screen for VT02N Transaction.
My requirement is,
Userexit MWMRF800 u2018ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0800)u2019
The SAP RF standard screen 2800 of function group LMOB has to copy to the custom screen 9800 of function group XLRF.
Here i need to create new custom screen as mentioned above and assign user exit to this screen.
Could anyone help me to do this.
Thanks in Advance.I have similar problem here. As suggested, I tried to change the package of the standard function group but its asking for access key. I am assigning CONFPP07 component to my project which is already saved under a Z package.
-
I want to block the withdraw qty in MB1A screen.I used MBCFC003 AND MBCF0005 BUT I couldn't get the exact result.Is it user exit for MB1A screen -PPC00009.So can anyone tell me the exact user exit.
Regards,
Maran.dDear Maran,
What's your exact requirement?What do you want to block in MB1A T Code?
You want to restrict for 261 movement for an order or reservation in MB1A?
These are the exits that can be used for MB1A,
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
MBCF0011 Read from RESB and RKPF for print list in MB26
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0009 Filling the storage location field
MBCF0007 Customer function exit: Updating a reservation
MBCF0006 Customer function for WBS element
MBCF0005 Material document item for goods receipt/issue slip
MBCF0002 Customer function exit: Segment text in material doc. item
Regards
S Mangalraj -
Dear all,
I want to use a user exit in IW22 screen to add notification time.
pls help me.
ThankxNo Screen Exit for IW22 i think it has only Function Exits
Custom Exits
IWO10026 User check on setting status 'Do not perform'
IWO10027 User exit: Generate user-defined settlement rule
IWOC0001 Create PM/SM notification: Determine reference object
IWOC0002 PM/SM notification: Check whether status change is allowed
IWOC0003 PM/SM authorization check of ref. object and planner group
IWOC0004 Change single-level list editing PM/QM/SM ALV settings
BADIs
IQS0_STATUS_MAINTAIN Control of Changeability of User Status
IWO1_SUBSCREEN_0170 Display Additional Data on Object Screen 0170 PhysicalSample
IWOC_LIST_TUNING Performance Tuning for Lists in PM/CS
IWOC_OBJECTINFO_CHNG Changes to Data of Object Info Screen
NOTIF_AUTHORITY_01 Additional Authorization Checks for the Notification
WOC_FL_DETERMINE Determine Date for Determining Installation Loc. Equi.
Edited by: Bala Krishna on Aug 20, 2008 4:00 PM -
Hi,
I would like to know if there is a screen user exit for the t-code ls32 (I can't find any).
And what I am suppose to do if there is no user exit ? should I ask a developpement key to modify the standard ?
Thanks,Than May be there is no exit for 301 as i can see there are hell lot of Screen exit for LS32 like:
MWMRF100
MWMRF101
MWMRF403
MWMRF404
MWMRF405
MWMRF406
MWMRF410
MWMRF411
MWMRF412
MWMRF502
MWMRF503
MWMRF504
MWMRF505
MWMRF600
MWMRF601
MWMRF205
MWMRF212
MWMRF213
MWMRF221
MWMRF302
MWMRF303
MWMRF304
MWMRF305
MWMRF312
MWMRF313
MWMRF321
MWMRF400
MWMRF402
...................And many more -
To find user exit and a screen exit for VD03
hi ,
can u please find if there is a user exit and a screen exit to add for adding a Z-field on for the customer master on the shipping tab. i.e VD03 transaction.
actually i have found the user-exit i.e exit_SAPMF02d_001.
but this exit is not triggering when i put a breakpoint.
so can u please tell me the solution for this.
regards,
soham pHi,
try these...
Enhancement/ Business Add-in Description
Enhancement
SAPMF02D User exits: Customer master data
Business Add-in
CUSTOMER_ADDRSCR_CHG Change Address Screen in the Master Data Maintenance
CUSTOMER_ADD_DATA Additional Data at Customers
CUSTOMER_ADD_DATA_BI Additional Data at Customers (Batch Input and ALE)
CUSTOMER_ADD_DATA_CS Additional Data at Customers (Subscreen Container 4000)
No.of Exits: 1
No.of BADis: 4
Arunima -
User Exit Program works Differently
I'm trying to sync user info from HCM system to a destination system. There is a limitation in SAP HCM system, which allows only full load and not incrememental load or sync up based on events(New Joinee, Position change, Employee Exit) to happen from source to destination. So, I thought User exit could fix this issue.
When a person inserts or changes or changes the status of an employee to quit through PA30 and saves it, the user exit program should pass the personnel number (numbers) of the user(s) as input to the report RPLDAP_EXTRACT_IDM.
I am trying to trigger a report(RPLDAP_EXTRACT_IDM) which exports the data from HCM to a destination system(IDM) with the help of a user exit program. Using PA30 when I change the user info and when I save it, through User exit program I'm passing the personnel number of the user(whose data has been changed) as an input to the report, which inturn will replicate the change to the destination.
Problem:
User Exit works differently here. After configuring User exit for this tcode(PA30), once I change a user's info and click save, without saving the data, it triggers the User exit program. Usaully while chanign user info, when I click 'SAVE', i get a message 'Recod changed', but now after sonfiguring User Exit program, since the program runs immediately as soon as i click SAVE, I see the following message' Successfully exported Data to the destination' . And the change that i make is not reflected.
Shouldn't the User Exit program be triggerred after the data is saved?
Is there a way where I can trigger the User Exit Program after saving the record.Not an ABAP expert, but I remember hearing something about PAI and PBO modules and separate user exit includes depending on where you are executing it. Is it worth investigating on these lines?
Also is it worthwhile configuring Change Pointers to capture whether a change has been made instead of coding user exits in PA30. You could code uxerexits in the ALE data transfer program to analyse the data based on change pointers and transfer data pertaining to New Joinees etc.
Again I am not ALE epxert, I am just giving my views For what they are worth. For better results perhaps you should post in ABAP forum. -
User Exit PO MM06E005 - Screen does not exist
Hello All,
I created a new object for user exit 'EXIT_SAPMM06E_012' in Development System. This user exit is under the enhancement MM06E005. The user exit EXIT_SAPMM06E_012 will be used to produce an error message when saving a PO.
After Transported the Project into Quality System and I tried running transaction ME22->Select one line Item record in table control -> (Menu) ITEM -> Confirmations -> Overview to confirm the PO. I have been getting a dump telling me that SAPLXM06 Screen 0111 Screen does not exist." This is because the screen exit was also included in the activation.
When I have deactivated the Project its working fine. This problem occurs only the activation of user exit.
Thanks & Regards
Sudheerhi,
the problem when activating the exit you would have checked or activated the screen which currently is there in the development system , or you would have activated the screens and put them in a different request or in $tmp so when the request having the exit got transaported the screen code or activation was not taken along.
Deactivate the exit and then deactivate the screens also.
and then try to activate and put all in one request : deactivated and activations.
Narayani
Message was edited by:
Narayani -
User exit for selection screen of Tcode VL31N, VL32N
Dear Experts,
I want to modify selection screen of tcode VL31N, VL32N. Please help me to send user exit Tcode VL31N, VL32N.
Thanks and regards,
DucTV1.Hi Patrik,
The ALV report is generating from a query AQZZ/SAPQUERY/MEMEVL31========, in which the field catalogue of the ALV is coming from normal list dispaly structure only, structure of which is coming from %goo structure.
Either try to find out an enhancement here , so that you can add fields over there.
Thanks and Regards,
Antony Thomas -
EXIT from a user exit to intial screen of MM01
hi friends,
I am working on MM01 user exit..after saving user exit ll trigger..and in one scenerio we need to come back to screen MM01 with message at task bar..
Please give some idea ..
regardswell to come back to your initial screen is quite easy.
goto mm01 on your initial screen and hit F1.
in the help hit the button technical information.
there you get some information. amongst them your dynpro number of the screen you are on. (ahhh BTW make sure you place you cursor on the main screen before doing above steps, otherwise you get the dynpro-number of the subscreen your cursor is placed on.)
Then at the end of your user-exit write: leave to screen (your dynpro number you identified with the steps above).
to place a status message i believe you already have to be on the dynpro on which you want it to display. this would mean you had to modify the PBO event of that dypro, and i dont think you want that.
but i dont see any other solution. maybe some other dude will post something about that -
Vendor User Exit at Initial Screen
Dear friends
When a vendor is created through XK01, I would like to control that if u201CAccount Group 1000u201D is entered then Purchasing Organization and Company Code fields must be mandatory before skipping them empty at initial screen. Although I found a user exit that controls the data on saving but itu2019s too late since after creation of vendor workflow will be triggered and until itu2019s approved no changes will be allowed.
Looking forward to your advice and thanks in advance.
Thanks and Best Regards,Hi,
Following are userExits of T-code XK01,
RFKRRANZ User exits: Accounts Payable Information System
SAPMF02K User exits: Vendor master data
To Activate User Exit or Implement it,
Use T-CODE CMODE.
First Check whether enhancement is assigned to a project in CMOD.
If it is not assigned, then assign it to a project by creating Project in T-Code CMOD.
After Assign Enhancement in project click on Components Button on Application bar of CMOD.
Click on Function Exit and Active the Include present in USER EXIT.
Write Your Code in the include fresent in UserExit.
There is a Active button at application Bar of T-code in CMODE to activate the exit.
Thanks & regards, -
Hi All,
In MD01 screen, you can find a field called <u>'User exit Parameter</u>".
The user will have 3 options to input the data into this field.
1. The User can enter single value... ex: E01
The user exit will execute the MRP Run based on this single value.
For this scenario, i have SAP standard code as follows.. (Pgm name: LXM61F01)
Here UXPAR will contain value 'E01'.
WHEN 'Z1'.
UXPAR = USER_PAR.
CONDENSE UXPAR.
WRITE UXPAR+0(3) TO DISPO.
IF DISPO IS INITIAL.
EXIT.
ENDIF.
IF MT61D-DISPO <> DISPO.
NO_PLANNING = 'X'.
ENDIF.
2. The user can enter multiple values... ex: E01, E03, E09.
The user exit should take these valuse into account and run the MRP.
The above code is meant for single value.
Now i have to develop the code for this scenario. How to build logic for this scenario as the UXPAR will have value "E01, E03, E09"...????
3. The user can enter values in range format... ex: E01-E05.
The user exit should take E01, E02, E03, E04 and E05 to run the MRP.
How to build the logic for this scenario..?????
Please Help me........
Regards
PavanCan anyone please look into this issue and help me out...????
Really appreciate your guidance in this regard....
Regards
Pavan -
hi,
While selecting material code in Purchase req screen I like to display the corresponding G/L account code in Account Assignment-->G/L Account field. Kindly give me the suggestion .
Thanks & Regards
R.VijaiCheck this MEREQ001 Customers' Own Data in Purchase Requisition USer Exit
Inside the above user exit you have a Screen Exit
SAPLMEGUI 0014 SUB0 SAPLXM02 0111
try with that
Maybe you are looking for
-
Data of matrix(with userdatasource columns) dissapear in form_add mode
Hi all, Why when i put the mode of my userform in ADD_mode the data of my matrix (with userdatasource data in columns,not linked to one table) disapear?. How i can do to not lost data? Exist any way? Thank you all again. Regards.
-
How to find who has created the condition records
hi all, in POF1 condition records were created.for material and plant.how to find who has created condition records for the material and plant. is there any way to find who has created please help me out. thanks sunny
-
first of all where can i get quick time 7 for mac every time i go on the apple website it keeps giving me the windows installer where the **** is the mac quick time installer. i am currently using os x 10.4.9 on a d,a with upgraded processors duel 1
-
In iPhoto 11 trying to create a book from an album.
Trying to create a book from album in iPhoto 11. The photos in the album were manually sorted to be in the order I want. When I select the album as the source for the book the pictures are re-aranged and placed in a different order. How do I use t
-
MacBookPro Kernel Panic Error.
Hi, sorry for my english. I bought my new mac book pro 13 "15 days ago. I already had 3 times the error message "You need restart your computer ......." I run these operations from Apple, restart in safe mode, I had no problem. How can I tell if the