Screen wakes almost normally, goes black, then wakes normally

Almost every time I wake my 15" unibody macbook pro, the screen will wake how it was prior to closing it, but I can't use internet. After 3-10 seconds, the screen will go black and then wake back up normally. Why does it do this?
I am able to use my computer normally when I first open the laptop, but the internet will not be working, though it claims to be working. It's like I open it up exactly how it went to sleep. Then, after the black screen flickers, everything will work fine.
Rarely, when I open my laptop up, the black screen is already there and nothing will fix it except for restarting.
Again, why?

http://support.apple.com/kb/HT2674
and
See
https://discussions.apple.com/thread/2005687?%2520threadID=2005687&start=210&tst art=0

Similar Messages

  • Ipad screen is white. Restored it on iTunes. Press home and on switch goes black then back to white with no logo at all. Can't get past the white screen. This happened after running app updates. 16GB OS 7.1.1

    The ipad screen is white. Holding buttons didn't work so I restored it on iTunes. When I press home and on switch, the screen is white,  goes black then back to white with no logo at all. Can't get past the white screen. This happened after running app updates. Is there any fix besides going to Apple store? In iTunes on computer can see what is on there. 16GB OS 7.1.1

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • Ff comes on, I go to site w/ pics the screen goes black & then w/ with a bubble from the bottom saying recovery from igfx display failure..Chr & Op = OK

    Firefox comes on, I go to a site rich w/ visual content & then the screen goes black & then white w/ with a bubble from the bottom bar saying recovery from igfx display failure..this used to happen on my Chrome browser (the Chr browser recovered spontaneously But I removed & reset it... still the problem went on & I quit using Chr for2-3 mos. There never was a problem on Opera. Hey! OPERA rule. As foe IE 8. That instrument is completely useless. Even all areon IE appears to be dead...Thanx!

    Try disabling hardware acceleration in Firefox.
    https://support.mozilla.org/en-US/kb/upgrade-graphics-drivers-use-hardware-acceleration#w_turning-off-hardware-acceleration

  • My screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

    my screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

    If you have not done a factory reset on the device, I recommend doing a complete  factory reset.  
    Factory Reset  - Warning this will reset device back to original factory settings.
    This method will not erase any MDN/MIN information
    Turn off the phone 
    Press Power + Volume Up/Down at the same time and hold until display will show a triage android screen 
    Display will show: 
    Reboot system Now 
    Apply sdcard:update.zip 
    Wipe Data/Factory Reset 
    Wipe Cache Partition
    Use VOL Down key to scroll down to "Wipe Data/Factory Reset", press home icon to select option and wipe device. 
    Display shows "All user data will be wiped out", press VOLUME Up to continue or VOLUME Down to exit. 
    Press Volume Up 
    Press Home to select "Reset System Now" - device will reboot
    If the problem persist I recommend having a store technician take a look at the device.
    Copy and paste the link below into your browser's address bar for the store locator.  
    http://www.verizonwireless.com/b2c/storelocator/index.jsp

  • My screen goes black then macbook restarts...what's happening?

    my screen goes black then macbook restarts...what's happening?  This has been happening often (3-4 times per day).  Not sure what kind of problem I am dealing with.  ideas?

    I have had Similar issues in my case it only seems to happen when the laptop is plugged into power. also if you shine a light through the apple logo on the front of the case you can see the LCD is actually running as is the OS it would appear the backlight is off. In my case I can resume operation by taping the F1 or F2 keys. All be it an annoying finx it is at least a simple one

  • Hi, I have an iphone4 and all of a sudden none of the apps (except the ones that came with the phone) will open. The screen goes black then it goes back to the homescreen. Any ideas? Thanks in advance!

    Hi,
    I have an iphone 4 and all of a sudden none of the apps will work, except the ones that came with the phone. When I open them the screen goes black then it goes back to the homescreen.
    Also when I plug the phone into itunes it only gives me the option to either restore or eject the phone. Up until today I never had any problems, I sync it regularly and all the software (inc itunes) is up to date. The last time I backed it up was about a month ago when I got the phone, (a replacement as my other iphone4 had loads of problems) so I don't want to have to restore it and lose everything off it!
    Any ideas? Thanks in advance!

    Sounds like the device was dropped at some point and damaged as a result.
    Take it to Apple for evaluation and a replacement.

  • My iPod has a white screen.  After holding down the middle and the menu button it goes black, then back white, and then beeps twice but stays white.  It never shows the apple logo, just stays white - help!

    My iPod has a white screen.  After holding down the middle and menu button, the screen goes black then back to white and beeps twice.  I have returned to original settings and resorted content to no avail.  I still have a white screen.  I have plugged it up and tried resetting again and again, still a white screen with two beeps - help.

    I have the same exact issue. Fifth generation iPod Nano, blank screen, Restore had no effect. I'm running Windows 7 Home, with all software up-to-date. I suspect hardware damage. Any clarification would be appreciated. Thank you in advance.

  • After shutdown I have to log in twice.  The first time it starts to load, then goes black, then gives me login page again.  Do you think I have a virus?  Or is this Yosemite bug?

    Just updated to Yosemite on my MBP.  After shutdown now when I login, it starts the process (the bar starts to move), then the screen goes black, then it asks me to login again and this time it is a successful startup.  Is this a Yosemite bug or do I have a virus?  I also have some funny tiling on the screen at youtube and some other websites.  Another bug? 

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Also see:
    Reinstall OS X Without Erasing the Drive
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • The screen on my MacBook goes black often. I can still see a faint image of what's on the screen, and can only get it to illuminate by moving it back and forth. What could the issue be? How can it be fixed?

    The screen on my MacBook goes black often. I can still see a faint image of what's on the screen, and can only get it to illuminate by moving it back and forth. What could the issue be? How can it be fixed?

    The startup disk may need repairing ...
    Launch Disk Utility located in HD > Applications > Utilities
    Select the startup disk on the left then select the First Aid tab.
    Click:  Verify Disk  (not Verify Disk Permissions)
    If the disk needs repairing, restart your Mac while holding down the Command + R keys. From there you can access the built in utilities in OS X Recovery to repair the startup disk.

  • IPad screen locks itself and goes black when nudged? very frustrating

    Hi, my IPad is driving me nuts! Can anyone help please?
    I can be in the middle of anything ( games, apps, typing, banking, etc. etc.) and with the slightest movement or nudge - the screen locks itself and goes black??
    I then have to press the home button, slide to unlock it - and it opens back up to exactly where I was.
    This happens constantly, and is so frustrating!

    Is there a case or screen protector that is possibly interfering with the proximity sensor (detects if the phone is near your face, allows the keypad/screen to be visible when the phone is away from your face)

  • I have an IPad 1.  For the past three days I've played Sims Freeplay without trouble.  Today it won't even open. It starts to, then goes black, then all the apps are visible again.  Any idea of what is going on?

    I have been playing EA's Sims Freeplay for three days.  Today the app will not open. It begins to, then goes black, then all the apps are there.  FB is doing it now, too.  Bookworm plays fine, as do other apps like ebooks and weather bug.  I don't know much about what goes on with an IPad, so any help is appreciated.

    - check the app store to see if the apps have an update available
    - delete and redownload the apps

  • My screen on iphone 5 goes black and and will will not respond to anything , how to fix that ?

    my screen on iphone 5 goes black and will not to respond to anything , can someone tell me how to fix this problem . thanks in advance !?

    I just replied in your other post
    To solve most of iPhone os problems you can perform a soft reset which will not change anything inside the phone
    It'll simply remove the errors
    To do that
    1.Hold power button for 5 seconds
    2.without releasing power button press home button and keep both pressed till the apple logo comes up
    3.Now release both buttons
    Your phone has now been reset

  • New iMac Can't See HD and screen goes black then grey then black..etc.

    Hi I've got a new 20" Alu iMac and it was working fine for the past 3 weeks. All of a sudden this morning starting it up the screen went completely grey then after a while the apple logo came on (I thought it was eventually starting) then it went completely black (this is normal just before the progress bar jumps in) but this time it didn't! , the screen just went to grey again and the cycle started again and kept going on like this for an hour. I tried starting up from the disk the iMac came with but under disk repair i could not see the HD and trying to reformat the HD it was just named 'Media'. When selecting the drive to format an error came up saying explain it could not be formatted in the selected format!!! There is only 2 options to format the drive.. Mac OS Standard and Unix.. Both did not work. Any suggestions? Thanks

    Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine. It's not clear if that applies under the 90-day warranty.

  • HT201263 None of these answers help my problem.  My ipad will not leave the Apple logo.  I hold both buttons and the screen goes black, then the apple logo immediately pops back up.  I can't do anything because the apple logo just keeps popping back on.

    I haven't been able to find any answers that solve my problem.  My Ipad will not leave the Apple logo.  I hold both buttons and the screen goes black and then the Apple logo immediately pops back up.  I can't get the red slider screen at all.  No matter how many times I hold down both buttons the screen goes black and then the Apple logo pops right back on.

    Before you do anything else, try charging via a wall outlet for a while, since its off. Then try turning it back on.
    When you put the device into recovery mode it allows you to restore the device when no other options work. You do risk losing everything currently strored on the ipad itself. Hopefully you've performed regular backups either via itunes, icloud or both. Evern if you have synced content to either of those, you may not lose everything. All previous purchases have been saved in the itunes and app stores, so you can dowload them again.
    while the ipad is off, press and hold the home button and plug the usb cord into the ipad. You should see a message pop up on the itunes window on your compoter screen that state it has discoverd an ipad in recovery mode.
    You should now be able to restore

  • Everytime I Click On An App the Screen Goes Black then to the Menu

    Everytime that I click on an app (except the preset ones from apple), the screen goes black (or to the initial start up screen for that app) and then goes to the main menu. HELP!
    PS:
    I've tried restoring it, AND removing all apps and putting certain ones back on. Neither worked.

    If you are talking about your iphone, then it may be useful to post in the iphone forum.

Maybe you are looking for

  • 3D Programming and 7000 Series set top box

    I want to watch ESPN 3D but the screens are split on my Panasonic 3D Plasma screen.  It is part of the Ultimate HD package but I have not been able to see it.  The technicians at Verizon give me a different story each time I talk to them.  One of the

  • HP 3210 printer to Dell Inspiron 7000 series laptop.

     Will HP3210 printer effectively connect to the Dell Inspiron 7000 series laptop? Older model printer works extremely well.  What portals/connections will be neede? Thanks!

  • Link to CRM document

    Hi Experts: I would like to send a link to a specific CRM page, e.g. Lead n° 100. Is it possible to generate this link? How do I obtain it? Best regards, Cristina

  • I want to remap my macbook function buttons without pressing fn

    Hi I have a new MBP I have unchecked the box that lets me use function keys for other than their original purposes So now I can use e.g. my last volume button to work instead as a Mission Control / Show desktop function that is really useful for me a

  • Unable to calculate the -ve overhead on WBS in CJ44

    Hi All I need your help for the below scenario with respect to OH calculation, please advise me Post journal against network 100$ Settle to WBSE                      100$ Post  OH calculation                    5$ Post reversal journal       -100$ se