Screen went black after contact with water

Good evening together, I got my tablet a few days ago and todays it got it's first conact with water. The screen went black instantly and I couldn't turn it on again. I turned it off with the red button at the MicroSD slot. All water caps were closed when it came in contact with water. The strange thing is that I can't register it at Sony Xperia Support because it says the ID 1100-4001-073433-6 is not valid. I already wrote an e-mail at the support but I don't know what will happen now. Did someone else had the same problems?  Thank you for your replys and have a nice day together!

 I'm sorry to hear that, contact your local Xperia care and request a vacuum test http://support.sonymobile.com/global-en/contactUs/  

Similar Messages

  • When I added a new contact the screen went black in contacts.  I'm not able to access my contacts now.  I turned the iPad off and back on, still onlythe black screen appears.

    When I added a contact to my contacts, took a picture and added Ringtone, pressed done, the screen went black and I am not able to access contacts.  I turned off the ipad but still cannot access contacts.

    I don't fully understand what the System Reset does but I've found that it cures many ills.  It's easy, quick and harmless:
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.
    A System Reset does not remove any apps, music, movies, etc. nor does it cause any settings to revert back to default.
    Also, you might wish to download the iPad-2 User Guide.  Pay special attention to page 162.  Note that this Guide also applies to the iPad-1 with IOS 4.3 except for those functions that are not supported by the hardware.
    http://support.apple.com/manuals/#ipad
    Finally,  the User Guide can be downloaded at no charge via iBooks and a less   comprehensive version of the Guide is included as a Safari bookmark.

  • 4s screen went black after updating to iOS 8.2

    So i updated my iPhone 4s to iOS 8.2 and the screen just went black after that. The phone is on but nothing appears to the screen and booting doesnt help. What should i do?

    Try waiting about 30 - 60 minutes to make sure that it isn't just the software being installed. After that, press and hold the Sleep/Wake button and the Home button together for 10 - 20 seconds until the apple logo appears.

  • My iphone fails to recharge after contact with water?what can i do??

    my iphone 4gs is failing to recharge after accidental contact with water, what can i do?

    You will probably have to replace it. Especially as you have now tried to charge it without drying it out first. But what MIGHT work is to put it in a plastic bag with some uncooked rice (or anhydrous silica gel) for several days, then try again.

  • My iphone 4 works but the screen went black after it got shot with a paintball. What is wrong with it?

    I went paintballing and i forgot i had my iphone in my pocket. I realized I was getting a call and my phone screen didnt work. It didnt crack it just went black. Everythin else works just not that. What is wrong with it?

    try holding and pressing the sleep button and home button together for a few seconds and see if there will be any change in the screen and apple logo should appear after 10 seconds or so if not i guess its a problem with the screen itself maybe darkened pixels or maybe a wire is cut off

  • Computer screen went black after trying to adjust settings

    Hello, I prior to upgrading to win8, I was using two screens with my b320.  After upgrading I could only use the main screen.  I was trying to adjust the settings to extend the view to the second monitor when...the main monitor b320 went black.  I know it is on in the background.  When I restart the screen flashed Lenovo...the window 8 emblem appears...then nothing, but the sound at startup.  I don't know what to do, since I can't SEE anything..can't adjust anything etc...any advise?

    hi Sassygurl,
    Welcome to the Lenovo Forums.
    Your display might be switched to the Second Screen (external monitor).
    Can you try to:
    1. Press the Windows Key+P and press the Up Arrow 3 times then press Enter (check this thread)
    2. Unplug the external monitor and change the screen source.to PC Screen
    Link to picture
    3. If same problem, try to boot into safe mode by prssing Shift+F8 (might require a few attempts as dicussed here)
    Let me know your findings.
    Cheers
    Moderator note; pictureconverted to link
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • HT1349 My camera screen went black after I took a picture

    I just took a picture and my camera screen  went black

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    iPhone User Guide

  • Transparent diagonal line on iPhone 6 screen after contact with water

    I had recently dropped my phone in water on accident and now there's a transparent, diagonal line across the bottom right part of the screen. When the phone is off, I can't see the line but only when it's on. After a while, some of it starts to fade away but, it's never completely gone. I'm not too sure what I should do to fix this, could anyone help? I have an iPhone 6. Thanks and sorry, I'm new to this. I'm not sure what category to put this under

    You really need to take it to the Apple Store and have them take a look at it. We cannot diagnose the extent of water damage that may or may not have been done over the internet....
    Sorry,
    GB

  • My screen went black what is wropng with my phone

    hi all my screen went black i cant see a thing and then it will start working again and then it will go black again, sometimes it works with the screen slide open and then sometimes it will only work with the screen shut, what can i do to get this fixed for cheap or is there something i can do myself

    Is it still in the 1 year warranty?
    THE BITTERNESS OF POOR QUALITY, LINGERS LONG AFTER THE CHEAPNESS OF PRICE, IS SOON FORGOTTEN.

  • 4s screen went black with the apple logo when i opened a text?

    went to open a text last night and then the screen went black with the Apple logo, but within seconds the main screen came back and the phone worked normally. Do i have a problem? It's only 4 months old so i hope its not on its way out already.
    Any help would be appricated.

    Reset your phone by holding down the home and off button until the apple symbol comes up, you wont lose anything. If it continues to do it after that, then do a restore of your phone in itunes.

  • My daughters Ipod Touch is stuck with a black/blue screen. She downloaded the game Breakaway from the App store yesterday and today she opened the game it said this game is not connected to game centers and the screen went black/blue reset didn't work

    She downloaded the game Breakaway from the App store yesterday and today when she opened the game it said "this game is not connected to game centers" and the screen went black/blue.  I tried resetting without the power adapter and with the power adapter and nothing happens.  She has only had the Itouch for 2 weeks.

    I did try that numerous times and nothing happened.  However, I did eventually get it to work.  After trying to reset it numerous times and the screen still just staying frozen I logged into the Home Share portion on the Home computer and deleted the Bubble Birds game.  Eventually the Itouch died and I was finally able to reset it by plugging it in and holding down the buttons.  I doubt the deletion of the game helped, but since it seemed to be the cause, I went ahead and deleted it.  Thank you for your reply.

  • Ibook g3 OSX 10.2.8 was upgraded to 10.4 but screen went black, sound fine.  How do I revert to 10.2.8 with blank screen?

    So here's what happened.  The Apple Store Geniuses generously upgraded my ibook g3 with OSX 10.2.8 to OSX 10.4 via USB port since my CD drive no longer works.  But the screen suddenly went black, sound was fine.  Genius was stumped, but when I restarted later I very briefly got an initial screen plus the music that accompanies an initial OS installation before screen went black again.  I really think that OSX 10.4 was more than my ibook g3 could handle.  I don't recall the specifications anymore and can't check them with a black screen, but capacity was fairly limited.  I went back to Apple a few weeks ago to ask them to downgrade my poor ibook g3 to OSX 10.3 which seems more likely to work with my computer's specifications, but was informed that OSX 10.3 is no longer available for them to load via USB.  Today it occured to me that OSX 10.2.8 is still somewhere on my ibook, and if there's some shortcut I can use to restart under 10.2 instead of 10.4, some switch of OS I can make while blind (since the screen is currently dark), I could at least still use the ibook using the old 10.2 OS.  Is there a way to do this switch in OSX while essentially blind?  If not, my ibook is basically a doorstop I originally spent over $600 on 10 years ago.  I really can't afford to just run out an buy new computers as I am disabled and dying a slow painful death from Lyme disease, but can't afford medication to treat my own illness, let alone buy another computer every 5 years.  Please help!

    Hello,
    Ok let's see what we can do here.
    First thing to try is resetting the PMU. Http://support.apple.com/kb/HT1431 it may make no difference but its good practice to do so.
    So times it can resolve faults. You say they installed Mac OS X 10.4. Did they setup a user a count and did you see the desktop? Did they simply hand it back to you when the installed failed with a blank screen?
    The truth is, in order for you to restore your iBook your going to need the system restore disk. With a broken CD drive this has limitations as you have no real means to install.
    The only option would be to use target disk mode on an external drive, but being an early G3 iBook I'm not sure if target disk mode will work. I am going to assume the shop used this method to install via USB.
    What would be a good solution is to fit a replacement CD drive. They are often cheap enough to buy and relatively easy to fit on a white duel USB model. Replacement CD drives can be brought from eBay at very little money.
    An online guide can help you fit one with the right screwdrivers.
    With a replacement drive, you will be open to better options for installing or even using an apple hardware test disk to diagnose any faults with the screen.
    Suprised you was left in such a situation by the shop.

  • My macbook 2008 screen went black a few months ago. I've been using it with a monitor. Today it's working. I have a feeling it's going to die at any time. Is it possible that a software patch fixed this ? Is there a utility I can run to test the screen ?

    Model : Macbook 2008
    Symptoms: The screen was, intermittently, going black last year and then went black completely. I have been using it on a monitor ever since.
    I can see the screen with a flashlight.
    I completely erased the drive and loaded OSx 10.7. I believe that's the last version of OSx Mac will be supporting on this computer.
    When I booted up the computer this morning the screen came on !
    While typing this question, my screen went black again, not to return.
    So sad.
    I did bring it to Apple and they believed the entire screen needed to be replaced.
    They say that they tried a new inverter and it didn't work.
    I have a feeling I'm just out of luck unless I want to cough up the $300 to fix the screen.
    Although it is a solid machine, 2Ghz processor with 4 gigs of ram, it is still six years old.
    I imagine that's like putting a new transmission in a 95 Honda civic. Yeah, it's a reliable car but it's old and it's probably going to break again.
    I love my mac so much but I can't justify buying a new one or  paying to fix this old one.
    I have a Gateway dual booting Windows 7 and ubuntu linux that's actually pretty slick and has taken it's place on business trips and coffee shop excursions.
    If anyone has any thoughts or feedback I'd appreciate it.

    The current Apple hardware warranty provides the following coverage for replacement parts:
    A replacementpart or product, including a user-installable part that has been installed in accordance withinstructions provided by Apple, assumes the remaining warranty of the Apple Product orninety (90) days from the date of replacement or repair, whichever provides longer coveragefor you.
    Check your particular warranty and see where you stand as to the period of coverage.
    Good luck,
    Ray

  • I have an iMac running Lion and W7 with boot camp . It has been operating flawlessly until I went to reboot into Mac tonight. Screen went black, and system is unresponsive. I've tried force quitting and turning power off. Hard drive starts but that's it..

    I have a 5 month old  iMac running Lion and W7 with the latest version of boot camp . It has been operating flawlessly until I went to reboot into Mac tonight. Screen went black, and system is unresponsive. I've tried force quitting and turning power off. Hard drive starts, there's a small amount of drive activity and that's it. 

    Hi Jane, your info may still be there, look in the Users folder at root of the drive, how many users are there there?
    It sounds like this may have happened...
    Return to default desktop, apparent "loss" of home directory, (it can happen spontaneously too)...
    http://docs.info.apple.com/article.html?artnum=107854

  • My iphone screen went black and none of the buttons wok after putting on my dock.

    my iphone went black after i out it on my dock. its completely unresponsive, ive tried to reset it but nothing happens.

    If you have got a different USB Sync cable try to charge your iPhone with that as there are possibilities that your current USB cable or Power Adapter is not Charging your iPhone. If it still doesn't work make an appointment to Nearest Apple Genius Bar

Maybe you are looking for