Screen will not stop blinking

Screen is blinking and contains the following in plain text:
SDRAM Full Test
RUN: BL on
PASS: BL blink
FAIL: BL off
Reset to continue.
I tried connecting it to a power source and also to my computer and it still hasn't stopped. In addition, my computer isn't recognizing that it's even connected. I tried to reset it by switching the hold button on and off and holding down the Menu portion of the wheel and that hasn't worked either.
What should I do?
Please help!!! =O
dell Windows XP
dell Windows XP
dell Windows XP
dell Windows XP

It can be a long list of items including being exposed to a static discharge, dropping it, getting it wet, overheating it, getting it too close to Bill Gates, feeding it pirated music, putting Blue Canyon Boys hardcore bluegrass on it, etc.
Glad you got it working, enjoy your music.

Similar Messages

Re: g6t-2000 loading circle next to cursor will not stop blinking

I have the same problem.I got a blinking circle on my screen and every time this circle show up, i have to turn off my pc because don't let me do nothing. Any solution for that issue? My pc:HP ENVY Recline TouchSmart All in One - 27-k350 (ENERGY STAR)Número de modelo: J4W47AA

Hi again Andieco, It is good to hear back from you! If your computer is not freezing when you are referring to a white circle, there may be an issue with the touch screen software installed on your computer. To correct this, I suggest re-installing all of the original software and hardware drivers that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 8), and then update the software by Using HP Support Assistant (Windows 8). If the white cursor will not stop blinking after performing the steps in the documents above, I recommend returning your system back to a previous restore point to before the issue occurred. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 8).
Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should return your system back to factory defaults.
If the issue persists, please call our technical support by clicking the link below to get the support number for your region.
www.hp.com/contacthp/
I hope this helps!
Regards

My ipod will not stop blinking!!!

I just got this thing today and I am already having problems! My iTunes page says that the ipod has been updated and yet the actual ipod will not stop blinking orange. I thought it was a fluke but then the computer said that the songs that I put on the ipod was in use by another program. I don't know what it means but the stupid thing has been doing this for hours now. Can someone help me?

Hi,
This is a common issue with the windows computers. There is noting wrong with the iPod shuffle. The iPod shuffle is in use by the computer and the its programs.
This will be resolved once the computer is restarted. Make sure that the iPod is connected to the computer while you restart the computer.
After it is restarted eject the iPod shuffle from iTunes or My Computer.
Post back if you have any questions.
Santo

Start up screen will not stop.

When I turn my MacBook on I get the gray screen with the apple and the spinning dashes, but it will not go any further. I left it open today for hours and it stayed on that screen. What does this mean?
Before this happened I had been working on the computer and it just froze up. Nothing would work so I force quit with the power button.

What operating system are you running please?

My new AirPort Express router will not stop blinking

I just bought a new AirPort Express. With the help of Time Warner, he gave me a new Modem and hooked everything together which included connecting router, modem to my husband's Windows PC. Now, the PC works great. My Apple IMac and Apple IPad work great and get the Wi-Fi very nicely. However, the AirPort Express unit continues to blink amber/orange and I don't think that is right. Should I do something or just leave it alone since everything is working great and I don't want to mess around the wires and cause things to stop working. Any help will be appreciated. Thanks.

Hello Peggy101
Check out the article below for more information about amber blinking lights on an Airport base station. When you use Airport Utility and click on the amber light it will list out what things that need to be corrected. You may not need to correct anything and can ignore certain errors.
Wi-Fi base station: Understanding and resolving a blinking amber status light
http://support.apple.com/kb/TS1589
Regards,
-Norm G.

BB 9300, indicator light will not stop blinking

Earlier today I received a call from a number that was supposed to be blocked in my Mr Number Callblock app, but came through anyways. Ever since, my light is blinking like there is something I need to check, but I have gone in and been through every app and even the hidden folders and can not find any notifications. I have done a hard reset. I am on 5.0 currently and there are no icons at the top of the screen or anything to show me what I need to check to turn the light off.
Any tips?
Solved!
Go to Solution.

Well good.
I love the unexplained resolutions.
Good luck!
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT1515 My new Airport Express will not stop blinking an amber light. What should I do?

I can't seem to get my new Airport Express set up properly. I've connected wifi cable from the modem, the USB printer cable and plugged in but it continues to blink amber. I've tried all the solutions mapped out in the instructions. What could be wrong?

Thank you so much for your reply. I went over the AP utility and reread the notes and solved the issue! Now, I need to solve a printing issue - I have two laptops, two Ipads and my Imac in my network and I would like them all to be able to print using my HP printer. Working on that now!!!

My iphone 4s will not stop autofocusing on the lock screen camera?

My new iphone 4s will not stop autofocusing on the lock screen camera, (the regular camera is fine.) It seems to focus on my face and then the green box surrounding my face doesn't go away, and I cannot click anything or exit until my screen locks after 15 seconds. What is wrong?

how did you turn it on?
I ask because I may not own a iphone4s but only a iphone4 and it don't have a LED on the front only on the back

Rebuilding aMacBook 1.83 GHz Intel Core Duo, hard drive failure so rebuilding system. Aircard will not stop self-assigning IP address. Any ideas how to resolve successfully?

Had hard drive failure on MacBook 1.83 GHz Intel Core Duo, so had to rebuild the OS on new drive. Was on Lion 10.7.5 prior to failure, but had to reinstall Snow Leopard 10.6.3 since that was most recent OS on media I had. After finally getting ethernet connection to router working, was able to get to internet and download / upgrade to 10.6.8. I assume I can probably buy the upgrade to Mountain Lion 10.8 from there.
Problem is this, Airport will not stop self-assigning IP address for my wireless connection, and unless I can get wireless back on this laptop, doesn't make a lot of sense to continue the rebuild and reinstall of all the software that was on it prior to HD failure. Only way to my home network and router is ethernet now. Everything else on my network (Apple MacBook Pro laptops, iPhones, desktops, and non-Apple printers and laptops) is hooking up to router wirelessly fine.
Any ideas how to resolve successfully so that the airport will stop self-assigning and allow the router to assign the IP address?

When see the beachball cursor, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Laserjet cm1415 will not stop showing "Incoming Call"

I have the fax setup in manual mode and it will not stop showing "Incoming call" on the panel even thjough there is no call comming in. Other than that everything works well. Any body have any ideas on how to get it off of that so the printer can go into sleep mode?
Thanks

The "Incoming Call" message is shown whenever we see a ring signal on the line, regardless of the fax receive mode.
If this message is showing up when no fax is being sent, then it means that there is noise on the phone line. You can contact your phone company to discuss options in reducing the noise on your phone line.
If this message is showing up with no phone line plugged in, then the modem inside the printer is detecting noise. It is possible that the internal fax parameters have become corrupt. If that is the case, then you can perform a "Restore Defaults" in order to reset them. Note: doing this will erase all of your settings. You can print out a configuration report before doing this so you can reset them. A restore can be done at the control panel by pressing [Setup] on the main screen (the button with the wrench on it), then select "Service" and then "Restore Defaults."
This is based on my own experience with the product.
I am an HP Employee.

After upgrading to IOS 8.1 the activity icon on the status bar will not stop rotating. Any suggestions?

AAfter upgrading to IOS 8.1, the activity icon on the status bar will not stop rotating. It's like the webpage never completely downloads. Any suggestions?

Nginear48 wrote:
Thanks for your quick response. I've tried everything you suggested and get only temporary fixes. Sometimes for a day or two, sometimes only until I use Safari for the first time. It's annoying and probably effects battery life between charges.
You would think that it must have some effect on the battery, but oddly enough, the update to iOS 8 actually helped my battery life, in spite of all of these hinky little issues that are taking place. In my experience, the activity icon is not affecting the battery in a negative way.
Another issue with IOS 8.1 that you may have seen is the loss of icon pictures on home pages. Again it seems to be Safari related, since app icons found in the App Store are not affected, only web based icons you personally put on home pages. I get what I call a test screen similar to what you used to get on old tv sets on every one of my personal icons.
I know exactly what you mean. I got that as well. On a few of them, when I opened the websites using the generic test screen icons and then closed them, they changed back to the way that they should look. For the ones that did not change, I recreated the home screen shortcuts and deleted the generic looking ones - the test screen icons.
And don't get me started on iBooks.
For the very limited use that I make of the iBooks app, i haven't noticed any problems, but I rarely use the app. I don't read books on the iPad other than a few user guides and if they are pdf guides, they reside in more reliable and feature rich pdf apps on my iOS device.
I wish that I had the fix for the spinning activity icon, but everything that I try, is temporary at best. IMO, this is the buggiest iOS update that I have seen, and I have been using iOS devices since iOS 3 on my first iPad. I realize that there are plenty of people that are not experiencing issues, but I have seen a number of weird things that I wish I could fix. None of my problems are major, but they are annoying.

The button on my Ipod Touch (the big one just below the screen) will not work when I press it. Nothing happens, when before it would wake my IPod out of sleep mode, and exit out of programs I was using. Now, no reactions. What should I do?

The button on my Ipod Touch (the big one just below the screen) will not work when I press it. Nothing happens, when before it would wake my IPod out of sleep mode, and exit out of programs I was using (ex. ITunes or Safari to main screen) . Now, no reactions. When I press the button, it appears to be more indented then it was before. What should I do? Do I need to get it fixed or replaced, or is this a problem I can fix on my own? Whatever it is, I really need some advice. Thanks in advance.

Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

My ipod touch will not stop playing music

My ipod touch will not stop playing music. I will pause the music, leave the playlist, and after 30-60 seconds, the music starts playing again. I use my ipod when I run and when I drive (hook it up to the stereo). It is very annoying when I stop to take a phone call or listen to directions, turn off my music, and then hardly a minute into my stop, the music starts right back up again.

FUEL1996, not correct. Apple does not allow one app to control another app.
laurathecellist
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Just got an Ipad and am working on setting it up. the one issue I am having with it is my screen will not rotate no matter what I do to the settings, I can't figure out if the settings are wrong or if there really is something wrong with my Ipad.

just got an Ipad and am working on setting it up. the one issue I am having with it is my screen will not rotate no matter what I do to the settings, I can't figure out if I have a setting wrong or if there really is something wrong with my Ipad. any help would be greatly appreciated.

Double click the home button (square) and all the things you did are there.keep sliding the bar that will come up on the bottom to the left till it cant go anymore there should be a icon looking like this.press that and it should work
Good luck hope it works.

Itunes 10 will not stop auto syncing

I have itunes 10 on a mac and a 160 gb ipod classic.
it will not stop auto syncing when I plug in my ipod, even though "do not auto Sync" button is checked as well as checking off "do not open itunes automatically.
It syncs FOREVER. I would love to find a way to stop this from happening. I dread plugging in my ipod to put on new music etc.

I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
I hope this helps you and any other users.

Screen will not stop blinking

Similar Messages

Maybe you are looking for