Screen with bizarre white lines when PB heats up: Has it been fixed ?

Some time ago (actually 2 years or so) there have been many complaints about Powerbook monitors running bizarre with white lines all over, especially when the PB is getting warm. There has been evidence that the problem is due to difficulties with the plug connecting the screen to the mainboard (some faulty insulation).
I wanted to ask if meanwhile there has been found a permanent solution. I have this problem for 3 or more years now. It gets better when I fix the plug from time to time but it keeps on coming and is really disturbing (though it doesn´t affect any other monitor connected to the PB (it´s only the internal screen).
Thanks for your help
Wolfgang

I know, this thread is horrible and consists of many different problems but there IS definitely a problem with faulty screens which has nothing to do with ranting.
I do own my PB since 6 years now and still love it like most of my Apple products within the last 20 years (besides my G5 who decided to give up with a motherboard failure 3 years after purchase).
The problem is, that Apple (unfortunately) kept ignoring the problem so that a lot of false presumptions, ideas and ranting occured.
I can only speak for me and MY PB.
Since year 2 after purchase always when the PB got warm (i.e. the fans chimed in) the built in screen showed irregular lines which made it unreadable. When closing the screen for a while and then opening it again, the problem disappeared for some minutes only to reoccur after a while.
The interesting thing is that if you connect an external monitor or beamer they don´t show any problem at the same time when the internal screen gets unreadable (this saved me many presentations) so the problem is most likely to be somewhere between the motherboard and the INTERNAL screen (which makes the connector the most likely cause. Insulating the connector with insulating tape made the problem to disappear for a while but it didn´t help in a long term.
That´s why I was asking if the problem has been solved meanwhile as I have been resignating more or less (have oredered a MacBook Pro anyway as a substitute for my passed away G5 anyway leaving the PB to my wife ).
Anyone can comment on this?
Best regards
Wolfgang
Message was edited by: Wolfgang Fogel

Similar Messages

My Ipod was in my back pocket and when I took it out it has a white screen with 3 grey lines going threw it, and not even 5mins before, it was working fine... what could i be? it also isnt hooking up to itunes... please help

My Ipod was in my back pocket and when I took it out it has a white screen with 3 grey lines going threw it, and not even 5mins before, it was working fine... what could i be? it also isnt hooking up to itunes... please help

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

7th generation ipod nano only displaying white screen with blue horizontal lines

Hi,
My 7th generation ipod nano is now only displaying a white screen with blue horizontal lines along the bottom. It still plays music and is recognised in itunes with I connect it to my PC.
I have reset is and restored it and it is charged.
Please advise.
Thanks,
Jess

Hi jkjuarez2012,
Thank you for visiting Apple Support Communities.
It sounds like your iPod nano is only showing the Apple logo with a white background, and you've tried many good steps including resetting and restoring the device. I know I'd miss my music in this situation.
Make sure that you followed the steps in this article when restoring your iPod:
Restoring iPod to factory settings - Apple Support
If the issue continues after restoring, your iPod nano may need to be serviced. You can use this link to find out more about iPod service:
If the issue is still not resolved, please read this information on servicing your iPod.
From:
iPod nano (7th generation): Hardware troubleshooting - Apple Support
Best Regards,
Jeremy

HT5858 I have had difficulty launching sites from within my email messages. So, in trying to revert to the default settings on my iPad I went into "Settings" and reset everything. Now, I have a black screen with a white apple and a white line! What do

For the last severl weeks I have had difficulty launching sites from within my email messages. Thinking that I may have gone into "Settings" and set something wrong, I decided to reset to the default settings. So, in "Settings" I chose reset everything. Now, when I turn my iPad on all I get is a black screen with the picture of a white apple and a white line below it. Nothing else works. What can I do? Do I need to send this back to Apple to be restored?

You will hopefully be able to restore it yourself. It sounds like you erased all constant and settings rather than resetting all settings. But I'm basing my theory on the fact that you are seeing the Apple logo with the white progress bar (the white line) on the screen. That's what you would see if the software was being reinstalled and then it stopped on you. If that is what happened, you need to restore again and most likely need to use recovery mode.
You can read about recovery mode here.
Recovery mode - Apple
However ...... If you are seeing the white line when you turn the iPad, let it go for twenty minutes or so, before you try restoring again. There is possibility that the software is still be installed and it can take a while before you see that white line move at all indicating that progress is being made.
Frankly, I don't think that the software is still being installed, but since you didn't say specifically how long the iPad has been like this, it could just be that the software hasn't finished installing yet. If you know better - meaning that it's been like this for hours or longer, then you do need to restore the device.

IMac 21.5" boots to white screen with vertical blue lines/bars then locks up

iMac 21.5" (mid 2010) Intel Core i3 4GB RAM with Radeon HD 4670 boots to white screen with vertical blue lines/bars:
Then it locks up after a few minutes, at which point the screen changes to white with these blue symbol things all over the screen:
If boot to Safe Mode, it still has the white screen with blue lines/bars, but eventually loads the login screen and I can successfully login and get to the desktop, but even that has the bars/lines.
Eventually, after enough restarts or hard shutdowns it will boot normally with no video/display issues. I've run disk checks, did the SMC and PRAM resets, checked logs (that I know of), and have even taken it completely apart, cleaned it out, reseated everything, put it all back together, but no change. I've read a few other posts about similar issues (but not quite the same video issue as this) where people had the logic boars replaced or reinstalled OSX, but that didn't always fix it. Any ideas? Has anyone seen this issue before? Thank you.

crw4096 wrote:
Is this a dead disk?
Very well could be.
If you can not startup from the Hardware Test, in Safe Mode or from > OS X Recovery as discribed in the Support article's.
Dig out the original Install Disc set that came with the iMac and do one of the following.
1. Attempt to Repair the Hard Drive.
Start from your Mac OS X Install disc: Insert the installation disc, then restart the computer while holding the C key.
When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
Click the First Aid tab.
Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
Select your Mac OS X volume.
Click Repair. Disk Utility checks and repairs the disk.
2. Run the Hardware Test from the second Install Disc.
1. Insert Disc 2 and Startup holding the D key.
2. Select the Extended Hardware Test.
Then if you still can not get anything going, you need to contact your Local Apple Store or AASP and make a Service appointment.
see > Apple - Find Locations

I have an ipod touch that continues to have a black screen with the white apple on it. It won't shut off and is completely frozen. This happened when we tried to restore it last night. Help please!!

I have an ipod touch that continues to have a black screen with the white apple on it. It won't shut off and is completely frozen. This happened when we tried to restore it last night. Help please!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I inadvertantly dropped my iphone 3 and now have a white screen with green vertical lines to the right. It won't sync with itunes due to an error. What can I do?

I inadvertantly dropped my iphone 3 and now have a white screen with green vertical lines to the right of the screen. It won't sync with itunes due to an error. What can I do?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If it does not resolve the issue, the device is permanently damaged and will require replacement.

I cannot make a call; when I do, it either doesn't connect or boots me out to a dark screen with a white apple

I can't make a call. Either the phone doesn't connect or I get a dark screen with a white apple

Hello mheskin,
Thank you for using Apple Support Communities.
For more information, take a look at:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
If you can't eject a CD or DVD or open the drive tray
http://support.apple.com/kb/ts2097
restart the computer, then hold down the mouse button or trackpad button while the computer is starting up, until the disc is ejected.
Have a nice day,
Mario

Why does my photoshop keep giving black and white lines when I use my lasso tool?

why does my photoshop keep giving black and white lines when I use my lasso tool? It has never done this before last night. It filles the Whole lasso seleted box with (what it almost looks like) black and white caution lines. then when I go to zoom out, my zoom option starts to mess up where you cant click and move your mouse to zoom in/out with ease but where you have to click to zoom out (many times).
Can ANYONE help me?

I am using CS5, WIndows 7, I am not sure how to tell if my drivers are up to, and I am more than happy to screen shot it.

My MacBook Pro just turned itself off while installing Windows 7. It has now got a black screen with a white flashing bar in the top left corner...what can I do?

I was just installing windows 7 onto my MacBook Pro. I selected to have 200GB for Windows and the rest leave for Mac.
I clicked install and the bar filled up as it should do. However, once the install had completed, my MacBook turned itself off. I assumed this was normal. Now, my MacBook has a black screen with a white flashing underscore in the top left corner.
What is wrong and what should I do?

Hold down the Option key when starting up then on the sceen that comes up select Mac OS X to boot from.
The Win 7 install didn't go well and is hung in some way. You should use boot camp assistant to remove the win partition and start over.
Make sure you are using a Retail version of Win 7. A Branded OEM version, like ones from Dell and HP, will NOT work to install Windows 7 on your Mac.

PDF white lines when placing in Illustrator

I have some PDF graphics created using MapInfo software.
When I attempt to place the PDF map as a layer in Illustrator, the map appears with numerous white lines as though each polygon area of the original map has been broken up into individual squares.
Is there some setting in Distiller to overcome this problem?
Should I be creating an EPS map file and then using that as a layer in Illustrator?

How was the PDF created? Printed, Exported? Some other method?
If nothing else helps, you could do the following: it looks like the problems are only in drop shadows and text. You could delete both from the Power Point file, export, save or print the PDF. Then import into Illustrator and recreate shadows and text there.
I don't think you could transfer the complete graohic from PP to Illy as vector anyway. So rather get away with as much as you can and then complete it.

After importing pictures they became grey with doted white line around

I have imported pictures (RAW CR2 format) from my camera hundreds of times and they all went well. But this time the only the import worked well (I saw the preview when each picture was imported). Then Iphoto asked if i would like to delete the pictures on the camera after import. I deleted them. But then when I should take a look at the pictures they were grey with doted white lines around all of them. When I chose a picture and check the properties I can see that the pictures use normal space. I tried to drag one picture to a directory in the finder but this didn´t work either. The export doesn't work either. When I scroll fast among the pictures I can see them for a short period but when I stop scrolling they will turn grey with doted white line around. Whats wrong? and how to solve?
system: iPhoto11 and Lion.

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Gallery Images: How to make clear PNG's open in full screen with a white background?

Hi,
So in the Life on Earth textbook, there is an image of an ant that has no background, so when you pick it up, you can see the text below without the standard "white box" around it.
I've scorwed the internet looking for answers but couldn't find any.
Please see the photos snapped from my phone of this:
Unfortunately... When I try to achive this, my images open on a black background.
I can achive the pick up.
Would really appreicate the help. Thanks...
Grant

Well, if I put a white background in my image, it opens in full screen with a white background. But has a white square when I pick it up:
This is with a 2028 x 1496 image same as above, just no background - came out of Illustrator - and this has the effect I want, as the first post but still opens to full screen with a black background.
Thanks for the help... Hope to get this one figured out!

HT4623 After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.

After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.

IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost

HT4623 so i downloaded the iOS 7 onto my computer. then wanted to upgrade. iTunes is waiting to connect to the phone after the restart. now it's stuck in the black screen with the white apple with the progress bar. then i look to iTunes and found out it s

so i downlaoded the iOS 7 onto my iTunes. then i wanted to upgrade. the phone is stuck in the black screen with the white apple and the progress bar. next time i click on iTunes, it says my phone "has an error and cnanot update" and now it is stuck on the black screen with the white apple and the progress bar almost finished. hasn't moved in 20 minutes.

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

Screen with bizarre white lines when PB heats up: Has it been fixed ?

Similar Messages

Maybe you are looking for