Screen wobbles and unsatisfactory rendering after last update
After the last automatic update (which upgraded QT to 7.2 and a couple of other things), the screen rendering has deteriorated markedly.
Moving the mouse around causes the screen to wobble by a pixel or two vertically and horizontally and the rendering of fonts (in Firefox particularly, but also system profiler and other apps) to look bad. The wobble is independent of any application and affects the dock as well as the whole screen.
Is there anything that can be done to fix this?
You have accidentally turned on screen zoom. Turn it off (System Preferences > Universal Access > Seeing > Zoom > Off).
Similar Messages
-
SOLVED Key board and mouse fail after last update
Both my wireless keyboard and mouse failed after I updated yesterday. I'm using KNOPPIX to post they both work with knoppix so its not a hardware problem.
KDE 4.1
Logitech keyboard and mouse
Last edited by normc (2008-11-08 00:05:37)Thanks a lot
Just want to add that I had to edit grub at start up and add "single" at the end of the kernel line.
The reason is that switching to runlevel 3 didn't work for me. -
[SOLVED] Bad font rendering after last update (pango issue?)
I am getting very strange font rendering problem. Look at the screen below. It only affects gtk windows (as you can see below HTML text is currently displayed, but url bar and context menu is not). I belive it appeared after upgrading pango package to 1.32, but downgrading it as instructed here (https://bbs.archlinux.org/viewtopic.php?id=151886), didn't help. Does anybody know what can it be? Any hints where to look for the solution?
Maciej
Last edited by mamciek (2012-11-20 22:01:45)brebs wrote:https://bugs.archlinux.org/task/32612?project=1
That seems to be an issue. Downgrading to xorg-server 1.13.0-3 resolved problem. Watching ticket for future updates. Thanks a lot
Last edited by mamciek (2012-11-20 22:02:58) -
After last updates I ran on Dec 1, 2010, the ThinkVantage button does nothing. Running the updates and drivers from the control panel flashes the GUI splash screen then closes.
Lenovo really screwed this one up! Now you can't even get the updates to work to fix other issues.
In the event logs I show PC-Doctor errors
The description for Event ID 1 from source PC-Doctor cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(1972) Asapi: (13:00:09:5300)(1972) DEFECT.LOCALIZATION - Error -- Missing String: scriptlets : button1 locale: PCDLocale: language = en, customer = lenovo, variant = ltt
Log Name: Application
Source: ThinkVantage Registry Monitor Service
Date: 12/1/2010 12:29:40 PM
Event ID: 0
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: jmw-77
Description:
The description for Event ID 0 from source ThinkVantage Registry Monitor Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Service started
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="ThinkVantage Registry Monitor Service" />
<EventID Qualifiers="0">0</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-12-01T17:29:40.000000000Z" />
<EventRecordID>42737</EventRecordID>
<Channel>Application</Channel>
<Computer>jmw-77</Computer>
<Security />
</System>
<EventData>
<Data>Service started</Data>
</EventData>
</Event>Hi and welcome to the forum!
Try uninstalling the PC-Doctor / Lenovo ThinkVantage Toolbox and System Update from Add/Remove programs, do a mandatory restart, thereafter download and run CCleaner, scan for registry issues with it and fix them. Subsequently, manually install both Toolbox and System Update.
Keep us posted with the results.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel -
Why did I lose my end call button at bottom of screen after last update ? I have to end a call by pushin button at top of phone
Hi dave2370,
Welcome to the Support Communities!
I'm sorry to hear you are having issues with your iPhone. The red End Call button should still be working.
For initial troubleshooting, I would suggest restarting and resetting your iPhone, and also updating it to the latest version of the iOS software, which is iOS 6.1.4.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
iOS: How to update your iPhone, iPad, or iPod touch
I hope this information helps ....
Have a great day!
- Judy -
Aperture crashed and will not open after last update. Anyone else have this problem?
Aperture crashed and will not open after last update. Anyone else have this problem?
Yes. See this very forum for 50 threads on it, that explain the solution.
-
After last update the split keyboard option is not working and side switch button option works opposite for mute and rotation lock.
Hi
A long story about your issue... I think the reason of this is why you have deleted some registry keys. If you delete something in the Windows registry you should really know what you do. You can damage the complete Windows system!
So I think this is the reason why the keyboard doesnt anymore.
In the user manual I have founded that the CD-ROM booting option is only available with optional optical disk drive.
So for me it sounds like that your USB CD drive is not compatible to the notebook -
My Ipod no longer appears in the list when plugged into my computer. As a result the autofill button is gone and I cant update songs to my 1st generation Ipod shuffle. This came about after last update. It's as if the system doesn't recognize my Ipod although I continue to get the message that the Ipod is syncing and the system signals me when the syncing is complete.
My main concern is how do I go about autofilling now?I said to click on the button NEXT TO (to the right of) the Settings button, which should say "On This iPod" in the current version of iTunes. The Settings screen is what iTunes is currently showing so clicking on Settings again will not change the screen.
In previous version of iTunes, you also clicked on the "tab" next to Settings to get a listing of the shuffle's contents, and the Autofill button. It was just called something else instead of On This iPod (I think it was "Contents"). So the procedure itself has not changed in the current version of iTunes.
I have a 1st gen shuffle, and that's how it works... -
Battery drain after last update (5.4.0.4165)
After last update battery consumption went up to 40%, reinnstalled and it dropped to 26%. But that is still way too high. Especially since I barely use it on my phone..
Sony
Xperia Z3
D6603
Stock Android 5.0.2
Mobile 3/4g and WiFi
Skype v. 5.4.0.4165
Attachments:
Screenshot_2015-06-09-12-38-28.jpg 351 KBHello, skypeisawfull-,
Thanks for submitting feedback about the battery life of Skype for Android. The developers of the app are making great strides to improve the functionality and other aspects, including battery life, so that it runs better for its users!
Skype, by nature, does use more battery than many other apps. It should be understood that it has to constantly contact Skype's servers in order to receive incoming call, chat and contact data. You can reduce the amount of battery usage by closing some other apps that you do not use, reducing screen use time, ensuring that you are in areas with good reception (because cell standby greatly reduces battery) and rebooting the phone after a day or two can make a difference in your battery life.
Remember that the development team has surely made it a priority to make the app consume less battery and kill off the bugs that cause that. They probably have more in store, so just you wait and see! Things could be looking good! With you posting this, they'll take notice and probably work to reduce that 26% usage to something lower in later updates!
Thanks for the feedback - keep 'em coming!
I.T. Professional
Virtualisation Solutions (VCA-DCV - VMware)
Donating time to help you here with your Skype needs.
If I've answered your question, feel free to "Kudo" me! -
Flash CC doesn't start up after last update
Flash CC doesn't start up after last update. It said "Training en zelfstudie" (Training and self-stufy in Dutch) for the update.
Everything was working fine before the update, now if I try to start-up Flash solo,
it says: "Flash werkt niet meer" (Flash has stopped working), and quits.
As you can probably tell from the message, I'm on Windows 7.
Now here is interesting info: if I double click a previous movie, then Flash starts up fine and loads the previous movie.
However when I close it and the screen that should appear is the "new movie" dialog, flash hangs again.
So obviously something went wrong installing the new update, or the update doesn't work properly.
I'm now working with my pre-cc flash5.5 version, which I re-installed to avoid crashing flash every time I close a file.
My questions:
1- Where do I log this problem? (Or am I in the right place?)
2- Can I re-install the previous version, which worked fine? (I can live without tutorials etc.)
3- Can I try to re-install this version if the above is not possible and how do I go about doing that?What fixed the problem for me was just reinstalling Flash CC. I thought I'd give it a try, because I couldn't find a message of anyone experiencing the same problem.
So I used the control panel to uninstall Flash, then I tried reinstalling.
Creative Cloud kept saying Flash is up to date, so you can't reinstall. If you click on the gear and choose Exit and then restart Creative Cloud it will take a few seconds, but the it will see the situation as it is and you can reinstall Flash.
After the reinstall the issue was gone.
Thanks for the other solutions, I think this is a handy resource for rolling back Flash if I ever do need it
and gives me more confidence in the creative cloud product.
Maybe Adobe will pick it up and make it easier for us 'normal' creative-cloud users to
pick which version we want. Like you can do in CVS systems. -
How to close my app after last update
I can't close my app with normal way after last update
Need help for this
ThxYou still double-click the home button to open the multitasking bar, but you now drag or swipe the app 'screens' up from there and off the top of the screen :
-
Display about 20% darker, Dim. Happened after last update.
My imac display is dim, kinda dark. Happened after last update and I have googled like crazy to find a solution, no luck so far. This is what i have done so far.
- I have tried several settings in the Energy Saver part of settings.
- Brightness is set to 100%
- I have tried several Display Profiles and also made my own.
- Did reset the PRAM, NVRAM several times.
- Even started it in safe boot etc..
- Reinstalled OS X completely
It seems like a software related problem. If i press sleep the screen of course goes black but the interesting thing is that when it wakes up it is back to the normal nice brightness for about 5-10 seconds then goes dim again.
Screen is at the normal brightness when using boot camp, windows.
Please if anyone has a solution, thank you.I'm not convinced that it is a software issue, here's why: Our DVD burner stopped working so we brought it in to the local Apple store for repair. BTW the machine is 2 & 1/2 y.o. and yes, I purchased the extended warranty and I'm so glad I did (usually I pass on them). Anyway, they replaced the burner, we picked it up and when we plugged it in at home I noticed that the display was nice and bright and then went dim!
I proceeded to change the display brightness controls as well as the gamma settings. I got it to look better (still not as bright as prior to repair) but it still got bright and then dim after waking.
Since there were no software issues with the burner replacement, other than perhaps some drivers for the burner???, I attribute it to the repair!
Just my $0.02 and would welcome any suggestions as to what it is and how to resolve the issue. -
After last update imac (2011) does't start.
After last update imac (2011) does't start. I press power button behind and its start screen with apple logo and gray progress bar, when progress bar is full its just turn off iMac. I Press button behind again and its come the same, over and over.
Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup Issues - Resolve
Startup Issues - Resolve (2) -
Camera blurry after last update how to fix?
Blurry camera after last update on I pad. How to fix?
Hello Littlebit5,
Thank you for the details of the issue you are experiencing with the camera on your iPad. I recommend following steps 3-8 below for the issue you described (these steps refer to an iPhone, but these steps are applicable to an iPad as well):
Camera isn't functioning
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M. -
ITunes no longer opening after last update.
ITunes not opening after last update on my main user. Second user is fine however accesses different library.
Computer freezes when attempting to open ITunes. Have also searched for the sync services file but is not located under reveal in folder or go to options.
Apologies I am not the best tech savy person and have read other posts trying to solve the problem. Other posts asked for the following reports.
Any assistance would be greatly appreciated - we are an apple household and this is effecting everything!
Log List ITunes
8/06/2014 2:39:28.757 pm com.apple.launchd.peruser.502[281]: (com.apple.iTunesHelper.27664[421]) Spawned and waiting for the debugger to attach before continuing...
8/06/2014 8:51:05.999 pm com.apple.launchd.peruser.502[281]: (com.apple.iTunes.49488[3827]) Exited: Terminated: 15
8/06/2014 9:04:40.000 pm kernel[0]: hfs: mounted iTunes on device disk3s2
8/06/2014 9:04:40.513 pm mds[40]: (Normal) Volume: volume:0x7fd43483dc00 ********** Bootstrapped Creating a default store:1 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/iTunes
8/06/2014 9:06:34.278 pm sudo[3918]: root : TTY=unknown ; PWD=/private/tmp/PKInstallSandbox.yTVHam/Scripts/com.apple.pkg.iTunesX.tO4vG4 ; USER=mel ; COMMAND=./Tools/AlertAll.app/Contents/MacOS/AlertAll /
8/06/2014 9:06:46.629 pm com.apple.launchd.peruser.502[281]: (com.apple.iTunesHelper.27664[421]) Exited with code: 1
8/06/2014 9:06:49.536 pm iTunesHelper[240]: _SubscribeForMuxNotifications (thread 0x7fff7ef70310): USBMuxListenerCreate: Connection refused
8/06/2014 9:06:49.536 pm iTunesHelper[240]: _SubscribeForMuxNotifications (thread 0x7fff7ef70310): USBMuxListenerCreate: Connection refused
8/06/2014 9:08:05.643 pm iTunesHelper[4058]: _SubscribeForMuxNotifications (thread 0x7fff7ef70310): USBMuxListenerCreate: Connection refused
8/06/2014 9:11:05.077 pm com.apple.launchd.peruser.502[281]: (com.apple.iTunes.49488[4118]) Exited: Terminated: 15
I was unable to find anything starting with iTunes under User Diagnostic Reports however located several starting with CFPREFSD, this was the latest one
Process: cfprefsd [4137]
Path: /usr/sbin/cfprefsd
Identifier: cfprefsd
Version: 855.16
Code Type: X86-64 (Native)
Parent Process: launchd [281]
Responsible: cfprefsd [4137]
User ID: 502
Date/Time: 2014-06-08 21:11:04.973 +1000
OS Version: Mac OS X 10.9.3 (13D65)
Report Version: 11
Crashed Thread: 2 Dispatch queue: com.apple.root.default-priority
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: 0x000000000000000a, 0x000000010e0c3000
VM Regions Near 0x10e0c3000:
Dispatch continuations 000000010d800000-000000010e000000 [ 8192K] rw-/rwx SM=PRV
--> mapped file 000000010e083000-000000010e1be000 [ 1260K] r--/rwx SM=COW /Users/USER/Library/Preferences/*/*.plist
MALLOC_LARGE 000000010e1be000-000000010e2f9000 [ 1260K] rw-/rwx SM=PRV
Thread 0:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x00007fff8f0bc662 kevent64 + 10
1 libdispatch.dylib 0x00007fff963fc421 _dispatch_mgr_invoke + 239
2 libdispatch.dylib 0x00007fff963fc136 _dispatch_mgr_thread + 52
Thread 1:: Dispatch queue: com.apple.root.default-overcommit-priority
0 libsystem_kernel.dylib 0x00007fff8f0bbcaa __sigsuspend_nocancel + 10
1 libdispatch.dylib 0x00007fff964047da _dispatch_sigsuspend + 21
2 libdispatch.dylib 0x00007fff964047c5 _dispatch_sig_thread + 45
Thread 2 Crashed:: Dispatch queue: com.apple.root.default-priority
0 libsystem_platform.dylib 0x00007fff982c80de _platform_memmove$VARIANT$Nehalem + 254
1 libxpc.dylib 0x00007fff907cf81e xpc_data_create + 82
2 com.apple.CoreFoundation 0x00007fff90641386 -[CFPDSource acceptMessage:] + 806
3 com.apple.CoreFoundation 0x00007fff90648d67 __handle_synchronize_message_block_invoke + 215
4 com.apple.CoreFoundation 0x00007fff9063fc1a __90+[CFPDSource withSourceForDomain:forRemoteClient:inContainer:user:byHost:managed:perform:]_b lock_invoke_2 + 42
5 libdispatch.dylib 0x00007fff963fd1bb _dispatch_call_block_and_release + 12
6 libdispatch.dylib 0x00007fff963fa28d _dispatch_client_callout + 8
7 libdispatch.dylib 0x00007fff963fc082 _dispatch_root_queue_drain + 326
8 libdispatch.dylib 0x00007fff963fd177 _dispatch_worker_thread2 + 40
9 libsystem_pthread.dylib 0x00007fff998cfef8 _pthread_wqthread + 314
10 libsystem_pthread.dylib 0x00007fff998d2fb9 start_wqthread + 13
Thread 2 crashed with X86 Thread State (64-bit):
rax: 0x000000010e1be040 rbx: 0x00007f9bb24043d0 rcx: 0x0000000000000010 rdx: 0x00000000000fa5fc
rdi: 0x000000010e1fe010 rsi: 0x000000010e0c2fd0 rbp: 0x000000010d7294b0 rsp: 0x000000010d7294b0
r8: 0x0000000000000003 r9: 0xfffffffef1e41fff r10: 0x00007f9bb2404210 r11: 0x000000000013b040
r12: 0x000000010e1be000 r13: 0x00007f9bb2504b40 r14: 0x000000010e083000 r15: 0x000000000013a60c
rip: 0x00007fff982c80de rfl: 0x0000000000010202 cr2: 0x000000010e0c3000
Logical CPU: 1
Error Code: 0x00000004
Trap Number: 14
Binary Images:
0x10d5d9000 - 0x10d5d9fff cfprefsd (855.16) <4342939E-DB15-3A1A-BCDE-6B3EF244CAAB> /usr/sbin/cfprefsd
0x7fff6eedc000 - 0x7fff6ef0f817 dyld (239.4) <042C4CED-6FB2-3B1C-948B-CAF2EE3B9F7A> /usr/lib/dyld
0x7fff8cc03000 - 0x7fff8cc2cff7 libc++abi.dylib (49.1) <21A807D3-6732-3455-B77F-743E9F916DF0> /usr/lib/libc++abi.dylib
0x7fff8ee44000 - 0x7fff8ee4bfff libcompiler_rt.dylib (35) <4CD916B2-1B17-362A-B403-EF24A1DAC141> /usr/lib/system/libcompiler_rt.dylib
0x7fff8ef27000 - 0x7fff8ef2bff7 libcache.dylib (62) <BDC1E65B-72A1-3DA3-A57C-B23159CAAD0B> /usr/lib/system/libcache.dylib
0x7fff8f0a1000 - 0x7fff8f0a5ff7 libsystem_stats.dylib (93.90.3) <4E51D5B0-92A0-3D0D-B90E-495A1ED3E391> /usr/lib/system/libsystem_stats.dylib
0x7fff8f0a6000 - 0x7fff8f0c2ff7 libsystem_kernel.dylib (2422.100.13) <498AEBD7-4194-3CF2-AA16-D5D03FFBD8C0> /usr/lib/system/libsystem_kernel.dylib
0x7fff8f626000 - 0x7fff8f637ff7 libsystem_asl.dylib (217.1.4) <655FB343-52CF-3E2F-B14D-BEBF5AAEF94D> /usr/lib/system/libsystem_asl.dylib
0x7fff8f638000 - 0x7fff8f686fff libcorecrypto.dylib (161.1) <F3973C28-14B6-3006-BB2B-00DD7F09ABC7> /usr/lib/system/libcorecrypto.dylib
0x7fff8f879000 - 0x7fff8f894ff7 libsystem_malloc.dylib (23.10.1) <A695B4E4-38E9-332E-A772-29D31E3F1385> /usr/lib/system/libsystem_malloc.dylib
0x7fff8fb06000 - 0x7fff8fb09ff7 libdyld.dylib (239.4) <7C9EC3B7-DDE3-33FF-953F-4067C743951D> /usr/lib/system/libdyld.dylib
0x7fff8fb0a000 - 0x7fff8fb0bffb libremovefile.dylib (33) <3543F917-928E-3DB2-A2F4-7AB73B4970EF> /usr/lib/system/libremovefile.dylib
0x7fff8fb2e000 - 0x7fff8fb33ff7 libunwind.dylib (35.3) <78DCC358-2FC1-302E-B395-0155B47CB547> /usr/lib/system/libunwind.dylib
0x7fff904b0000 - 0x7fff90695fff com.apple.CoreFoundation (6.9 - 855.16) <A63E680E-E4B2-368B-8564-9DBE0D8DDB91> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff907cd000 - 0x7fff907f1fff libxpc.dylib (300.90.2) <AB40CD57-F454-3FD4-B415-63B3C0D5C624> /usr/lib/system/libxpc.dylib
0x7fff90e2c000 - 0x7fff90e2dff7 libDiagnosticMessagesClient.dylib (100) <4CDB0F7B-C0AF-3424-BC39-495696F0DB1E> /usr/lib/libDiagnosticMessagesClient.dylib
0x7fff912c0000 - 0x7fff912c1ff7 libsystem_blocks.dylib (63) <FB856CD1-2AEA-3907-8E9B-1E54B6827F82> /usr/lib/system/libsystem_blocks.dylib
0x7fff928cb000 - 0x7fff928d5fff libcommonCrypto.dylib (60049) <8C4F0CA0-389C-3EDC-B155-E62DD2187E1D> /usr/lib/system/libcommonCrypto.dylib
0x7fff9342b000 - 0x7fff9343cff7 libz.1.dylib (53) <42E0C8C6-CA38-3CA4-8619-D24ED5DD492E> /usr/lib/libz.1.dylib
0x7fff935ac000 - 0x7fff935b3ff8 liblaunch.dylib (842.90.1) <38D1AB2C-A476-385F-8EA8-7AB604CA1F89> /usr/lib/system/liblaunch.dylib
0x7fff94021000 - 0x7fff94048ffb libsystem_info.dylib (449.1.3) <7D41A156-D285-3849-A2C3-C04ADE797D98> /usr/lib/system/libsystem_info.dylib
0x7fff94904000 - 0x7fff9490bff3 libcopyfile.dylib (103) <5A881779-D0D6-3029-B371-E3021C2DDA5E> /usr/lib/system/libcopyfile.dylib
0x7fff94d40000 - 0x7fff94eedf27 libobjc.A.dylib (551.1) <AD7FD984-271E-30F4-A361-6B20319EC73B> /usr/lib/libobjc.A.dylib
0x7fff94eee000 - 0x7fff94ef3fff libmacho.dylib (845) <1D2910DF-C036-3A82-A3FD-44FF73B5FF9B> /usr/lib/system/libmacho.dylib
0x7fff94f28000 - 0x7fff94fb1ff7 libsystem_c.dylib (997.90.3) <6FD3A400-4BB2-3B95-B90C-BE6E9D0D78FA> /usr/lib/system/libsystem_c.dylib
0x7fff9510d000 - 0x7fff9510dff7 libkeymgr.dylib (28) <3AA8D85D-CF00-3BD3-A5A0-E28E1A32A6D8> /usr/lib/system/libkeymgr.dylib
0x7fff95121000 - 0x7fff95122fff libunc.dylib (28) <62682455-1862-36FE-8A04-7A6B91256438> /usr/lib/system/libunc.dylib
0x7fff9551f000 - 0x7fff95546ff7 libsystem_network.dylib (241.3) <8B1E1F1D-A5CC-3BAE-8B1E-ABC84337A364> /usr/lib/system/libsystem_network.dylib
0x7fff957eb000 - 0x7fff959a3ffb libicucore.A.dylib (511.32) <A7CE7DAD-D3AD-36A2-BE4F-25C5F21FADBB> /usr/lib/libicucore.A.dylib
0x7fff95bf4000 - 0x7fff95bf6ff7 libquarantine.dylib (71) <7A1A2BCB-C03D-3A25-BFA4-3E569B2D2C38> /usr/lib/system/libquarantine.dylib
0x7fff95c26000 - 0x7fff95c68ff7 libauto.dylib (185.5) <F45C36E8-B606-3886-B5B1-B6745E757CA8> /usr/lib/libauto.dylib
0x7fff96057000 - 0x7fff9605ffff libsystem_dnssd.dylib (522.90.2) <A0B7CF19-D9F2-33D4-8107-A62184C9066E> /usr/lib/system/libsystem_dnssd.dylib
0x7fff963f9000 - 0x7fff96413fff libdispatch.dylib (339.92.1) <C4E4A18D-3C3B-3C9C-8709-A4270D998DE7> /usr/lib/system/libdispatch.dylib
0x7fff96414000 - 0x7fff9641dff3 libsystem_notify.dylib (121) <52571EC3-6894-37E4-946E-064B021ED44E> /usr/lib/system/libsystem_notify.dylib
0x7fff96a20000 - 0x7fff96a21ff7 libSystem.B.dylib (1197.1.1) <E303F2F8-A8CF-3DF3-84B3-F2D0EE41CCF6> /usr/lib/libSystem.B.dylib
0x7fff982c4000 - 0x7fff982caff7 libsystem_platform.dylib (24.90.1) <3C3D3DA8-32B9-3243-98EC-D89B9A1670B3> /usr/lib/system/libsystem_platform.dylib
0x7fff99815000 - 0x7fff99867fff libc++.1.dylib (120) <4F68DFC5-2077-39A8-A449-CAC5FDEE7BDE> /usr/lib/libc++.1.dylib
0x7fff998cd000 - 0x7fff998d4ff7 libsystem_pthread.dylib (53.1.4) <AB498556-B555-310E-9041-F67EC9E00E2C> /usr/lib/system/libsystem_pthread.dylib
0x7fff9996e000 - 0x7fff9996fff7 libsystem_sandbox.dylib (278.11) <B46E4040-A8C6-3EBC-91F8-F1CB01106614> /usr/lib/system/libsystem_sandbox.dylib
0x7fff99c2c000 - 0x7fff99c5bfd2 libsystem_m.dylib (3047.16) <B7F0E2E4-2777-33FC-A787-D6430B630D54> /usr/lib/system/libsystem_m.dylib
0x7fff9a11e000 - 0x7fff9a120ff3 libsystem_configuration.dylib (596.15) <4998CB6A-9D54-390A-9F57-5D1AC53C135C> /usr/lib/system/libsystem_configuration.dylib
External Modification Summary:
Calls made by other processes targeting this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by all processes on this machine:
task_for_pid: 6540
thread_create: 0
thread_set_state: 0
VM Region Summary:
ReadOnly portion of Libraries: Total=74.9M resident=13.6M(18%) swapped_out_or_unallocated=61.2M(82%)
Writable regions: Total=45.8M written=480K(1%) resident=584K(1%) swapped_out=0K(0%) unallocated=45.2M(99%)
REGION TYPE VIRTUAL
=========== =======
Dispatch continuations 8192K
Kernel Alloc Once 4K
MALLOC 28.4M
MALLOC (admin) 16K
STACK GUARD 12K
Stack 65.1M
VM_ALLOCATE 28K
__DATA 1080K
__LINKEDIT 66.2M
__TEXT 8872K
__UNICODE 544K
mapped file 1260K
shared memory 4K
=========== =======
TOTAL 179.2M
System Profile:
Model: iMac12,2, BootROM IM121.0047.B1E, 4 processors, Intel Core i5, 3.1 GHz, 4 GB, SMC 1.72f2
Graphics: AMD Radeon HD 6970M, AMD Radeon HD 6970M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3230554638424353302D444A2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3230554638424353302D444A2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.74.0-P2P
Bluetooth: Version 4.2.4f1 13674, 3 services, 23 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5690H, 277.5 MB
USB Device: Hub
USB Device: 1861
USB Device: Internal Memory Card Reader
USB Device: IR Receiver
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: iPhone
USB Device: MFC-J6910DW
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: iMac, Apple Inc., 25.1
Also located,
Diagnostic Messages
Powerstats for: iTunesHelper
com.apple.iTunesHelper 11.2.2 (11.2.2) <D9314C39-EAF4-37E6-B8D8-2731175CD7B2> /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app/Contents/MacOS/iT unesHelper
Powerstats for: iTunes...now my computer updated it again. It opened, tried to collect information about the copyright, the an error message popped up saying that iTunes does not work correctly due to any mistake...
Please help me!
Maybe you are looking for
-
Prompt issue with WebI Report on top of Bex
Hello Experts, I have WebI report on top of Bex. I have Material Parameter on WebI which has materal key and text. When I select Material, It gets only Mateial Name not the key. We have some users they want to see both text and key. Any help would be
-
I imported to library in iPhoto and now have an album called com.apple.iLifeMediaBrowser which contains a lot of pics that were deleted plus a bunch of other pics......How do I move pics from this album to their original album???
-
FMPLUP-Plan uploading result OK while data not be posted, without Log
Hi Expert I have created planning layout and assigned to planner profile with excel integration. I've got the file description to be specific in the Flxible Upload screen. When I upload data in transaction code FMPLUP, the result is OK. However, the
-
On this iPhone is not showing up when I am connected to iTunes with my iPhone 4s
I am trying to remove and add stuff to my iPhone 4s and there is no on this iPhone button to push to do this. How do I get it to work?
-
SOS!!! apply resin patch failed !
I'm using resin3.0.10,and when I use the command below: [root@linusfs lib]# java -cp tangosol.jar:coherence.jar:coherence-web.jar com.tangosol.coherence.servlet.resin30.ApplyPatch /usr/local/resin3/lib I get: Backed up "resin.jar" to "resin.jar.002"