Screens missing when the Recording is processed : XK01

I need to upload vendor master data. I also need to capture second address under the International Versions section. I could record it ( selecting the checkbox "Not a Batch Input Session") in the very first screen of SHDB.
Otherwise we will not be able to see the actual screens in ME11.
Problem:
When the recording is processed, the International versions screen is not displayed and the process stops in the very first screen itself. It is not proceeded further.THe recording shows that everything is captured perfect.
Can anybody give me the solution for this.This is very critical.
SAP Version : 4.7
Regards,
Siva

Hi Siva
Try checking the Central Address Mgmt check box in the first screen while taking a recording. Or, if you think it is an issue with authorizations, try recording with an MM (functional) user id.
If you find this answer useful, please reward me for the same.
Good luck
Karthik Potharaju

Similar Messages

RoboHelp x5 TOC and index missing when the project is converted to RoboHelp 10

As the title says, RoboHelp x5 TOC and index missing when the project is converted to RoboHelp 10. Any ideas for recovering or importing the x5 TOC and index?
Before this is suggested, auto-create is not an option.

Hi there
Perhaps give this a try. From the Project Manager pod, right-click the Table of Contents area and choose "New Table of Contents". Give it a name and enable the "Copy existing Table of Contents" check box. Then click the Ellipsis icon on the far right side. See if you have a .HHC file in the folder. Odds are, you will. That will be the existing (missing) TOC.
Hopefully that will work. If so, repeat the process for the index.
I think when upgrading the project something goes wrong with naming.
Let us know if this helps... Rick

IPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds recorded. This happens randomly and often and sometimes has the delay but starts at zero. Solution Anyone?

After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
Thanks

After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
Thanks

When i run Time Machine to back up my computer onto an external hard drive, i have no way of knowing when the back up process has been completed. I don't know when it is safe to disconnect the external hard drive - which is store in a separate location.

When i run Time Machine to back up my computer on to an external hard drive, i have no way of knowing when the back up process has been completed. This is necessary to know because i don't leave my external hard drive connected to the computer. I routinely disconnect it after backing up the hard drive, and then i store the external hard drive in a different location from the computer. So, knowing when the back up process has been completed would be a very helpful thing to have the computer specify.

Just enable Time Machine's menu extra (System Preferences -> Time Machine -> Show Time Machine in menu bar.
This will add a little Time Machine icon to your menubar. When Time Machine is actively backing up your data, the icon will spin as a visual indicator. You can also click the menu icon to see the backup status, including how much data is left to back up.

I would like to inquire about how I could have my iPad 2 repaired or replaced. I bought it With a credit card via apple store website last June 19 of this year. At first, I already noticed a little white spot in the middle of the screen visible when the d

I would like to inquire about how I could have my iPad 2 repaired or replaced. I bought it With a credit card via apple store website last June 19 of this year. At first, I already noticed a little white spot in the middle of the screen visible when the display on screen is dark. I thought this was okay. Now, My problem with it is that, it now has green discolorations at the center whenever the screen display is black or dark I.e. When a website's color is black or dark or whenever I go to the search interface.
I am from the Philippines.
Please attend to this inquiry as promptly as possible. I'm sorry I have to send it here since I cannot see any email or inquiry page on the apple website. I also cannot reach the toll free number on my mobile phone.
Thank you very much.
<Serial Number Edited by Host>

You can find out how to get service for your iPad on this web page:
http://support.apple.com/kb/index?page=servicefaq&geo=Philippines&product=ipad
Regards.

Issue when the invoice is processed through Edi.

Hi Experts,
Purchase order reference line items are missing when the invoice is created using EDI.
Can any body have an idea on above given?
Regards,
SK.

Hi,
How you are creating invoice?
Creating based on data coming from Idoc or sending Invoice data as Idoc.
please elaborate.
Regards,
Bhavana.

After releasing the order same screen user updating the quantity in process order in sap pp

Hi experts,
After releasing the order in the same screen user updating the quantity in process order in sap pp.
How to control it.
can any help in this regards
Thanking you,
Rishit.

Hi Rishit,
You can control it by BAdi WORKORDER_UPDATE method AT_SAVE make error message if there is any change in quantity.
Or you can create Transaction Variant through SHD0 for CO02 and make field Total Qty (CAUFVD-GAMNG) as output only.
Regards,
R.Brahmankar

Should the screen show when the ringer switch is changed?

My ringer is not working on my 4S with 7. Should the screen show when the mute switch is changed from on to off and back? I believe it did before.

But is not now. and my ringer is intermittent.

I called 888 442 4551 and when the recording told me to press any number its not working,

I called 888 442 4551 and when the recording ask me to press any number on dial pad its not working, means I can not make any choices,,,

No, Apple does not support downgrading iOS. Never has.
Start with a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
If that doesn't work, you may need do a full restore.

How to add a field to the selection screen and when the user enters ...

hi all,
can any one plesase send the code of how to add a field to seletiion screen and when the user enters in the field , it should be store in the database table , the table is MKPF and the field is BKTXT. Thanks.

Hi Kripa,
   If u r using PNP ldb then the screen u will get is the screen for that ldb and if u want to add some more fields then u define using selection-screen..as follows
SELECTION-SCREEN BEGIN OF BLOCK mysel WITH FRAME TITLE text-111.
PARAMETERS: n_in_en RADIOBUTTON GROUP g1,
            q_ev RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK mysel.
SELECTION-SCREEN BEGIN OF BLOCK mysel1 WITH FRAME TITLE text-222.
PARAMETERS: r_date TYPE sy-datum DEFAULT sy-datum.
SELECTION-SCREEN END OF BLOCK mysel1.
SELECTION-SCREEN BEGIN OF BLOCK mysel2 WITH FRAME TITLE text-333.
PARAMETERS:f_ver(3) TYPE c DEFAULT 1,
           c_no(10) TYPE c DEFAULT '9D0161',
           u_id(15) TYPE c,
           password(15) TYPE c,
           r_email(30) TYPE c DEFAULT PARAMETERS: s_not TYPE c AS CHECKBOX.
PARAMETERS:t_run TYPE c AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK mysel2.
SELECTION-SCREEN BEGIN OF BLOCK mysel3 WITH FRAME TITLE text-444.
SELECTION-SCREEN BEGIN OF BLOCK mysel4 WITH FRAME TITLE text-555.
PARAMETERS: p_ser RADIOBUTTON GROUP g2,
a_ser RADIOBUTTON GROUP g2.
SELECTION-SCREEN END OF BLOCK mysel4.
SELECTION-SCREEN BEGIN OF BLOCK mysel5 WITH FRAME TITLE text-666.
PARAMETERS:p_path TYPE string.
SELECTION-SCREEN END OF BLOCK mysel5.
SELECTION-SCREEN END OF BLOCK mysel3.
u will get this additional screen after the screen of ldb.
I hope this will help u..
Thanks & Regards
Ashu Singh.

Why won't my screen turn when the phone does?

why won't my screen turn when the phone does?

Not all apps support screen rotation. The Home screens do not rotate. But also check to make sure you have not locked screen rotation. Swipe up from the bottom of the screen to reveal the Control Center and check that rotation lock is not on.

When I put in a DVD, the mac locks up, an image from the DVD stays on the screen even when the dvd is removed. The only way to remove the image if to do a hard shutdown.

When I put in a DVD, the mac locks up, an image from the DVD stays on the screen even when the dvd is removed. The only way to remove the image if to do a hard shutdown.
Is the hardware corrupt?

Could you be a little more descriptive, does this happen with all DVDs? Please describe the type of DVDs you are attempting to use, commercial movies, blank DVDs, etc...

Populating the screen field when the cursor moves to that field

hi every one,
I want to populate the screen field(MODULE POOL) When the cursor moves to that field.
So can any one help me out with this.
EXAMPLE..
I want to populate 'S10_TOT_PRICE' (Total Price). When the fields like 'S10_PIECES' (Number of Pieces) will be entered. I want to populate 'S10_TOT_PRICE' without pressing any button on the screen nor when enter is hit. When the field 'S10_PIECES'' will be entered with some value and the cursor moves to 'S10_TOT_PRICE' . The Total Price field should be populated. Please help me out with this.
THANKS & REGARDS.
Mahanta.
POINTS WILL BE REWARDED.

Sorry but look at this SAP documentation <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/54/0608162d0711d295520000e8353423/frameset.htm">User Actions on Screens</a>
Extract :
<i>User Actions on Screens
There are various ways in which users can interact with screens.
Filling Input Fields
Users can enter values in any input field on the screen, or change the value using the mouse, in the case of radio buttons and checkboxes. The contents are placed in the corresponding screen field. Filling an input field does not normally trigger the PAI event. Exceptions to this are Checkboxes and Radio Buttons with Function Codes and input fields with Drop Down Boxes.</i>
So, i fear that you cannot "take hand" when user fill a numerical field to perform calculations and update the screen.
Regards

How I can eliminate commas in a concatenation when the records is not there

I am getting these results
Holly Eliza Congdon, 2002, Son, John Harvey , 1981, other, , ,
Peter Allen, 1966, other, Duke Beardsley , 1992, other, , ,
Nellie Wood, 2011, Son, , , , , ,
Shawn Burns, 1986, other, , , , , ,
Jay Taylor, 1977, , , , , , ,
William Travis Stoll, 2013, Son, , , , , ,
Mary Beth Cockerham, 1982, , , , , , ,
Alice Tower Knapp, 1981, , Chris Tower Zafren , 1975, other, Dana Rose Tower, 2012, other
Jahd Khalil, 2011, Son, , , , , ,
Lauren Scott, 2009, other, , , , , ,
Danielle Restuccia, 2008, other, , , , , ,
I want to be able to NOT display the , , , , , (commas) if the record have only one relative
this records has 3
Alice Tower Knapp, 1981,Mother , Chris Tower Zafren , 1975, Other, Dana Rose Tower, 2012, Other
looks fine
but this one:
Jahd Khalil, 2011, Son, , , , , ,      LEG     09/20/2009 10:55:46
Only one, how I can eliminate the , , , , , ?
Here is the query:
SELECT spriden_pidm, 201090, '1', '1',
                   szcasup_relative1_name
                || ', '
                || szcasup_relative1_class
                || ', '
                || decode(szcasup_relative1_relation,'S','Siblings','O','Other','M','Mother','F','Father')
                || ', '
                || szcasup_relative2_name
                || ' , '
                || szcasup_relative2_class
                || ', '
                || decode(szcasup_relative2_relation,'S','Siblings','O','Other','M','Mother','F','Father')
                || ', '
                || szcasup_relative3_name
                || ', '
                || szcasup_relative3_class
                || ', '
                ||decode(szcasup_relative3_relation,'S','Siblings','O','Other','M','Mother','F','Father'),
                'LEG', SYSDATE
           FROM saturn_midd.szcasup, saturn.spriden
          WHERE spriden_ntyp_code = 'CAPP'
            AND szcasup_common_appl_id = spriden_id
            AND szcasup_relative1_name IS NOT NULLEdited by: peace4all on Sep 20, 2009 8:18 AM
Edited by: peace4all on Sep 20, 2009 8:18 AM

Maybe, but if there are trailing blanks
SELECT REGEXP_REPLACE('Jahd Khalil , 2011 , Son , , , , , , LEG 09/20/2009 10:55:46',' ,', '') FROM DUAL;
you need to take care of that first:
Jahd Khalil 2011 Son LEG 09/20/2009 10:55:46 <-- no commas at all!
1 row selected.
I guess there are many ways, and the old REPLACE is more than capable.
WITH dummydata AS (SELECT   'A' one,
                            'B' two,
                            NULL three,
                            'D' four
                     FROM   DUAL)
SELECT   one || ', ' || two || ', ' || three || ', ' || four record
FROM   dummydata
UNION ALL
SELECT   REPLACE (record, ', ,', ',') record
FROM   (SELECT   one || ', ' || two || ', ' || three || ', ' || four record
            FROM   dummydata)
UNION ALL
SELECT      one
         || CASE WHEN two IS NULL THEN '' ELSE ', ' END
         || two
         || CASE WHEN three IS NULL THEN '' ELSE ', ' END
         || three
         || CASE WHEN four IS NULL THEN '' ELSE ', ' END
         || four
            record
FROM   dummydata

BEX :Selection screen missing when executing a query

Hi all,
When I am executing a query through BEX Analyzer,I am not getting the Selection Screen Popup.Instead ,the report is directly being generated.So,this is giving rise to various problems.But when the user is executing through portal,he is getting the selection screen.
I am not getting this Selection screen popup in all the DEv,Quality,PreProd and Production systems.And hence ,i am not able to give the selections for a report
Can anyone please provide a solution for this?
Awaiting your response.
Thanks,
Amar

Hi,
Our GUI version is 710 and 640 is recommended by the client.Hence, no problem with that.The user is able to execute more than one query.
Do u think it is a basis or security related issue.Or is it due to Application of some GUI Patches.
Thanks,
Amar

Screens missing when the Recording is processed : XK01

Similar Messages

Maybe you are looking for