Screens pop up one at the time?

I am building HP 5371A whic have different modes which cary different screen display. I have build all the modes as separate VI's and now I will put them together but I am wondering what block would make certain front panel show up when I activate that mode/VI? property Node maybe????
thanks

To make a subVI's panel visible when you call it, select VI Properties from the file menu or right clicking on the VI's icon. You then want to choose the Window Appearance category and click the Customize button. On the Customize Window Appearance screen, select Show Panel When Called and Close Afterwards if Originally Closed. This assumes that you're not calling the VIs dynamically with VI Server. If you are, then you use the property Front Panel Window.Open

Similar Messages

My mac froze in an application so I shut it down by powering off with button, now when I try to turn it on I have a grey screen with Apple loge and the timer swirling but it doesn't get past this, please help!

I Shut down my Mac by holding in the power button after my iMac froze and now when I try to turn it back it on all I get is the grey screen with Apple loge and the timer and doesn't get any further. I have tried the diagnostic test but nothing was found.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

All my downloaded(digital copy) movies will no longer play in itunes, i get a black screen, and no sound, but the time keeps going. how can i fix this?

All my downloaded (digital copies from dvds) won't play in itunes. I get a black screen and no sound, but the time keeps moving. How do i fix this?

Hi 22chill,
I recommend that we delete and re-download the movie from your purchase history:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Thanks,
Matt M.

HT5437 When I try to connect to a WiFi network that I need a screen pops up and says "The network you're attempting to join requires you to install a profile on your Apple TV." What does this mean?

When I try to connect to a WiFi network that I need a screen pops up and says "The network you're attempting to join requires you to install a profile on your Apple TV." What does this mean?

Yes, home sharing requires both to be on the same wifi network. As it stands access to the network requires the login via webpage, which cannot be done on Apple TV. You will need to speak to IT in order to grant access for the device.

I have a file on my desk top and in my iPhoto called .DS_Store and I can't trash it it just pops back up all the time. What do I do?

I have a file on my desk top and in my iPhoto called .DS_Store and I can't trash it it just pops back up all the time. What do I do?

Download and run the free application TinkerTool (not "TinkerTool System"), select the Finder tab, and uncheck the box labeled Show hidden and system files. Then click Relaunch Finder.

HT3466 Can one connect the Time Caspule to the iPhone to act as a network internet modem?

Can one connect the Time Caspule to the iPhone to act as a network internet modem? No fixed line service is available and using a dongle on the computer denies use of the network

Can one connect the Time Caspule to the iPhone to act as a network internet modem?
Sorry, but no. The Time Capsule needs a wired Ethernet broadband connection to be able to provide an Internet connection for connected devices. Check with your cellular provider to see if they have an adapter that might do what you want. Something like this...for example:
http://www.cradlepoint.com/products/mobile-broadband-routers/ctr35-wireless-n-po rtable-router

MAC OSX 10.3.6 having Boot Problems(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!

Hi Frnds,Small Favour for me,...
MAC OSX 10.3.6 having Boot Problem(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!, Windows 7 is working perfectly , can i restore any files in MAC OSX 10.3.6 through Windows 7, or i need the MAC OSX 10.3.6 Bootable Files i need to enter the MAC OSX....

Hi Frnds,Small Favour for me,...
MAC OSX 10.3.6 having Boot Problem(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!, Windows 7 is working perfectly , can i restore any files in MAC OSX 10.3.6 through Windows 7, or i need the MAC OSX 10.3.6 Bootable Files i need to enter the MAC OSX....

I am trying adobe Photoshop and adobe illustrator because I can't decide which one to buy so I want to try both, after I downloaded Photoshop I can not see the option "free trial" for adobe Illustrator, it is because I can only free try one at the time??

I am trying adobe Photoshop and adobe illustrator because I can't decide which one to buy so I want to try both, after I downloaded Photoshop I can not see the option "free trial" for adobe Illustrator, it is because I can only free try one at the time??

Bryan,
You can download both at the same time.
But you may wish to start off with one and use it full time, then download the other later, so you get the maximum possible time with both.
If you have trouble getting the free trial on the Adobe site, you may try here or here:
http://prodesigntools.com/tag/ddl
http://technolux.blogspot.co.nz/2011/02/adobe-direct-download-links-less-akamai.html#more

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

The best thing to do would be to start over. Use Setup Assistant this time.
Boot into Recovery, launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume. Quit Disk Utility and install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
Using Setup Assistant
Don't transfer the Guest account, if it was enabled on the old system.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

LG Optimus Zone. is there anyway to take the carama button off the screen and use one of the physical buttons on the phone to take pictures??

Duplicate discussion - please see:
LG Optimus Zone. is there anyway to take the carama button off the screen and use one of the physical buttons on the pho…
Message was edited by: Admin Moderator

Hello jr1984
Awesome question. Unfortunately there isn't a way to reassign the buttons. There may be a 3rd party application for the camera that would have a different option.
JoeL_VZW
Follow us on Twitter @VZWSupport

HT3142 I clicked the double arrows and the size of the screen covered the entire screen. how can I go back to smaller screen where I can wsee the time and icons and everything in one look?

I clicked the double arrow and the screen enlarged and covered everything. now I cannot see the time and icons etc. how can I control the size of my display screen?

Press the ESC key or push the cursor all the way to the top of the screen to reveal the menubar. Click on that same gadget to return to normal size.

TB keeps getting Not Responding message. Screen freezes. Happens all the time. I am running STOPzilla anti-virus

I get the Not Responding message on both TB and Firefox all the time. I have seen issues using McAfee and a list of other Anti-Virus programs but I use STOPzilla and it is not listed at this time. It gets very annoying when typing something and the screen freezes for several seconds and have the Not Responding message and then it will work again. I am running TB 31.0 and Windows 7. Thank you.

Perhaps someone close (geographically) can give you a hand?
[http://windows.microsoft.com/en-ca/windows/view-cpu-utilization-performance-information#1TC=windows-7 This Windows Help article] explains how to check for resource use on your PC.
What I described is a one-step test in Thunderbird: ''On the Help menu, click on "Restart with Add-ons Disabled". '' This would help determine if the problem is among an add-on installed in Thunderbird.
If that doesn't show improvement, the problem is not within Thunderbird but elsewhere in the system. Starting the computer in Safe Mode then helps confirm if the problem is in Windows (and not specifically in Thunderbird).
I understand you may not be comfortable doing this by yourself, perhaps ask someone close to help you in person, by showing them our answers here.

Unresponsive script screen pops up constantly freezing the browser

It started when using the chat of Facebook but after also when playing it's games, that this screen "Unresponsive script" pops up constantly and the browser freezes till I click on the markers "Don't ask me again" and "Stop script"
This started to happen when I updated Firefox because this never happened before.
I loved Firefox but now it has become very annoying.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

My hp g62-a20sa laptop's screen does turn on all the time. is this hardware failure?

If I turn on my laptop screen seems to be working, but not all the time. It simply does not turn on time after time at all. However I can hear PC's fan is spinning and HardDrive is spinning as well...
I have reinstalled OS, also updated graphics card. Nothing helped.
Retail shop where I have bought this PC does not want to replace this PC or hardware, because they 'cannot' identify the problem...
HELP!!!
This question was solved.
View Solution.

Karimba,
Thank you for your quick reply.
Yes, I am in agreement with you, and I understand it is a big inconvenience because a one-year-old computer is not old at all.
I am not sure if you are aware of the current warranty status of that computer, but if it is still covered, you can get a free repair under warranty. If you are unsure of the warranty, you can check with the HP warranty checker tool.
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

What do i do if while replacing my iphone 4s screen i lost one of the screws on the inside near the camera? am i okay without that screw or what should i do?

I was replacing my cracked screen on my iphone 4s and while unscrewing one of the screws it fell out and i cant find it. It was the upper screw near the camera on the EFM shield and antenna clip. I was wanting to know whether i would be okay without that screw or what i should do?

A couple of things I would suggest. If you have a friend with a broken iPhone of the same type, they might be willing to let you take it apart to get the missing screw. Or, if you bought the replacement screen from one of the reputable online sources (as opposed to some fly-by-night ebay vendor), then you might want to contact them and see if they will sell you the single screw for some minimal price.

Screens pop up one at the time?

Similar Messages

Maybe you are looking for