Screensaver comes on while playing netflix

Since the update this morning I have to keep the remote active while watching Netflix or the screensaver will come on. Still works fine watching movies off my PC.

I found a old post, I restarted the box like recommended and it works perfect now!

Similar Messages

Safari stops while playing netflix

Hi,
After installing yoshemite every now and then my safari just stops while I'm playing netflix. It does not happen every time and sometimes it takes more than an hour before it happens but very regularly safari just quits. I cannot find where this is coming from nor how to fix it. I cannot find strange add-ons or plug-ins and everything is up to date. It only happens with netflix. If I reopen safari and open netflix again, I can just easily continue watching where I stopped but it is very annoying... Anyone an idea how to solve this problem?
Thx!

No i wont. mostly because Safari just works the best of all internet browsers. and secondly IT IS MICROSOFT, so i will not use IE8. And apart of my problem it works just fine.
But thanks anyways
Message was edited by: Luiserd

Vizio smart Tv won't stay connected to my linksys e1200 while playing Netflix

I have a Vizio Smart TV and just over the last couple of days I cannot seem to get it to stay connect to my Linksys e1200 router. I will start a movie on Netflix and it will play for about 10 minutes and then disconnect. I talked to somebody in Cisco Linksys Customer support and they said that the problem had something to do with IP Addresses. I have no idea what he was talking about. All I know is last week I could watch an entire movie without losing connection and this week it only stays connect for 10 minutes and then I have to turn the TV off to re-connect.
Ideas?
Thanks

Umman, is your Smart TV wirelessly connected to the router? There may be an interfering wireless signal in the area that interrupts the connection. Try changing the router's wireless channels to avoid interference.
Here's an article that may help.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=3759

Screen freezes after score sheet comes up while playing bridge

I have been playing bridge on Pogo.com and I have cleared my files and cache each time before I play, but after the first score sheet comes up my screen freezes. I have just downloaded Java completely, does any one have an answer to this question?

A Java Card is a smartcard/chipcard, not a playing card -> wrong forum

Screensaver comes on while using TX2z

Small issue that is bugging me to no end. Using only the pen or touch, the input is not recognized by the powersaving or the screensaver. I turned off the screensaver to fix that issue, now it turns off the screen and then locks windows so I have to relog. I tried to disable screensaver and in power options the screen shut off in there as well. Any ideas?

You can either chat with an online representative to talk about the problem or go straight down to HP Service Center for their staffs to check your problem.
For convenience you can choose the 1st option.
For a faster and better solution you can choose the 2nd option.

Maverick's Screensaver Comes on Even if Video is Playing... Why / How to Stop?

Hi,
Maverick's screensaver comes on even if video is playing...
Why is that, and how can we stop this behaviour?
We tried EyeTV, VLC, UMPlayer, it is the same for all three... I guess the problem is with the screensaver?
But the screensaver is Maverick's default (clean Mavericks installation on a new iMac)... I don't think this is supposed behaviour.
Thank you for any idea!

*bump*
Still not working, at the moment I use energy safe set to 3 hours as a work around... However, a working screensaver would be better!

Recently while playing my IPOD touch 5th Generation on my automobile deck I saw ERROR 19 appear and it powered down. It did not come back on. I jacked it onto a computer and saw error 49 come up. Can anyone assist with what might be the problem?

Recently while playing my IPOD 5th Generation on my automobile deck I saw error 19 appear and it powered down and did not com back on. I jacked it onto a computer and saw error 49 come up. Can anyone help with what the problem might be?

What were you doing when you received error 49 on the computer?

New MacBook Pro (Snow Leopard 10.6) Freezes while playing Portal, WOW, etc,

I have the new macbook pro that came out February 2011 with Mac OS-X 10.6, and I have encountered multiple problems with the computer running sluggish and freezing up in some applications. For example while playing Portal, the computer will get extremely hot and everything will freeze while the fan slows down, then it will come back, and about 5 minutes later it does it again. Same thing happens with WOW and I'm sure with many other applications. Even will run slow while watching tv on Netflix. It's ridiculous and unacceptable. Is there a news release with a factory defect or an update available to fix this overheating problem? Thanks

Is there a news release with a factory defect
Not that I am aware of. Check Google or call Apple Care as you are still under warranty.
or an update available to fix this overheating problem?
User Tip: How to deal with MacBook Pro and MacBook heat?
Per your user manual: Do not operate your MacBook Pro on a pillow or other soft material, as the material can block the airflow vents. Never place anything over the keyboard when operating your MacBook Pro. Never push objects into the ventilation openings.
From MacBook Pro: Care, Use, and Safety Information
For prolonged use, place your MacBook Pro on a flat, stable surface. Do not place your MacBook Pro on your lap or other body surface for extended periods of time. Prolonged body contact can cause discomfort and potentially a burn.
with Mac OS-X 10.6
Use Software Update to update your os to 10.6.7 or you can go to Apple's download website to install the combo update. Also, update everything that is listed in Software Update that pertains to your computer.
Check WOW's website for updates or contact their customer service department and forums.

Apple TV 5.0.1 update - Screen Saver kicks in while watching Netflix content.

Howdy all,
I just updated my Apple TV (2nd generation) to 5.0.1, and after the update, I went to Netflix to watch a TV show. It started and played just fine, but after a few minutes, the video disappeared and the screensaver kicked in, while the audio from the show continued to play. Of course, I can tap one of the directional buttons on the remote to get the picture back, but I figured this might be an overlooked bug from the update.
Is anyone else experiencing anything similar?

I got almost the same problem.
I'm streaming video from an IPhone 4S using AirPlay to my AppleTV3 with SW 5.1(5201). After a few minutes the screen saver kicks in but the audio from the video is still playing. By pressing the directional buttons on the Apple remote the screen saver disappear and the video is back.
This is an annoying bug that's been around for a few years.

Problem with fobs4jmf while playing various formats in JMF application

hi all,
well i am using fobs4jmf & JMF2.1.1e.while playing various formats like avi,dat,xvid etc. JStudio hangs & while playing them with my application program gives following run time error
FOLLOWING ERROR WHILE PLAYING .AVI FILE
Failed to configure: com.sun.media.PlaybackEngine@480457
IO exception: BasicPullParser: readBytes(): Reached end of stream while trying
to read 4 bytes
Error: Unable to realize com.sun.media.PlaybackEngine@480457
javax.media.CannotRealizeException
Exception in thread "main" java.lang.NullPointerException
at Mediaplayer.<init>(Mediaplayer.java:131)
at Mediaplayer.main(Mediaplayer.java:214)
Press any key to continue...
FOLLOWING ERROR WHILE PLAYING .DAT FILE
Failed to configure: com.sun.media.PlaybackEngine@17943a4
Bad header in the media: WAVE Parser: expected magic string WAVE, got CDXA
Error: Unable to realize com.sun.media.PlaybackEngine@17943a4
javax.media.CannotRealizeException
Exception in thread "main" java.lang.NullPointerException
at Mediaplayer.<init>(Mediaplayer.java:131)
at Mediaplayer.main(Mediaplayer.java:214)
Press any key to continue...
i have installed fobs4jmf & all its codec are added in jmf registry.
also is there som multiplexer that has to be added as i am already using a demultiplexer given along with fobs4jmf.
plz reply....
mayank
[email protected]

Hi everyone, I am actually trying to make a media player using
JMF and FOBS4JMF. My problem is that I've followed all the procedures to
install fobs4JMF and it all works fine until I try to register jar files using
jmstudio. In fact, it works when i open runjmstudio.bat. The movie is played
fine, jars are correctly registered ... but when I close it and I open jmstudio
again it fails and I get the error : "Failed to realize: input media not
supported: XVID video, mpgelayer3 audio" plus codecs, demultiplexer ... are not registered anymore. In fact, it works with fobs_jmstudio.exe (the one in the fobd4jmf folder) and not with jmstudio.exe (the one in the jmf folder). When I try to add them manually into the second one, I get the error : "Could not add Item". I wonder if you had any idea of what type of problem it could be.
I've posted my problem in many forums but nobody seems to have the solution. Thanks a lot.

Acrobat has encountered an error while playing this media clip

Hi,
I have downloaded a pdf file from the web which has embedded audio in it.
When I try to play the audio, the following message comes up “Acrobat has encountered an error while playing this media clip. Adobe’s Windows build-in player cannot play this format as the required decoder is not installed on the system.”.
I can attach the file, if the problem can be resolved. If you need more information, kindly advise?
Can you kindly assist?

That means it's a PDF containing "legacy media", which requires external software to play it. Unfortunately the audio itself could use any type of encoding, and the error tells you that whatever it is, your default media player (WMP) doesn't understand it. Rather annoyingly, when running in embedded mode WMP doesn't tell you what codec it's having problem with. It's one reason why this feature has been removed from the latest version of Acrobat.
This forum doesn't allow generic file attachments, but if the PDF came from a public website please post the URL and someone will take a look at the structure. Sharing of copyrighted material via file upload services is not permitted.

Issue while playing the content of Azure Media Services after deleting the channel.

Hi,
We are having the issue while playing the content of Azure Media Services after deleting the channel.
Please find detail scenarios below:
We have done live streaming of an event using Azure Media Services, event was around 5-6 hrs. After completion of event channel was deleted, when we checked content data
it was only 1hr. Content has only last 1 hr. recording, we are unable to get full recoding.
We divided event into two parts to avoid above issue. After completion of 1st part which was of 2 hrs., we stopped the streaming and deleted the channel. New channel was
created and streaming was started for 2<sup>nd</sup> part, after completion of event channel was deleted. Now we are unable to play the content data for 1st part but able to play the 2nd part of event through content publish URL.
We have done streaming of 3 hrs. event on 18th April with same process and full recoding was available.
Can you let me know what might be the issue?

Hi,
Please refer to Justin’s blog and see if it helps:
http://www.justinkobel.com/post/2012/04/30/SharePoint-2010-Claims%E2%80%93Operation-is-not-valid-due-to-the-current-state-of-the-object.aspx
As suggested by Alex, please provide more information about your process of changing password.
Here is an article for updating passwords on SharePoint 2010:
http://blogs.technet.com/b/seanearp/archive/2011/01/25/updating-passwords-on-sharepoint-2010.aspx
Regards,
Rebecca Tu
TechNet Community Support

ITunes seems to be skipping/hiccuping while playing music during browisng.

Hello Everyone
So for the past month or so I experience intermittent "hiccuping" while playing music through iTunes on my PC. Songs don't skip in the traditional sense of skipping from one song to the next ... instead it's more like a blurp/drag. It lasts for about a second or two and then it stops. It happens mostly when I'm web-browsing. I've tried using another browser but nothing seems to help. my PC is three years old and it came with Windows 7. I've used Windows 8 since it became available so I guess that's about two years now, I'm on to Windows 8.1. My system has a 1TB hard drive, 4 GB of RAM, and an AMD Athlon X4 640 3GHZ processor (I don't know much about processor specs but I thought I'd include it to be as thorough as possible). Of the TB of Hard Drive space, I've used less than 40% of it. I've run virus scans, malware scans, I've made sure my defrags and Windows updates are up to date. There was recently an update to iTunes in the last day or so - and I was really hoping this would be fixed - but the problem seems to be getting worse.
I'm to the point where I'm ready to download Google Play and just use iTunes solely for syncing my iPhone 5s. I cannot continue to put with playing music in iTunes with this problem. I'm at my wit's end. I've considered "dumping" everything on to an external hard drive, wiping my system and starting fresh ...
Anyone have any thoughts, ideas?

It may just be your DVD player. I have found
this
with some of my DVDs. They work fine on my player
and
skip on others.
That results from a high level of burn errors as a
result of low quality media and/or high burn
speeds.
Hmm, maybe. I never (knowingly) use crappy media.
I always use Imation discs (mainly because they are
fully printable - and I thought they were meant to be
good quality). Also, I cant see where to change the
burn speed. I always burn a disc image and then use
Disk Utility to burn a disc. It just does it
automatically and doesn't seem to offer any choices.
How can I get it to burn at slower speed? I'd
prefer not to use third party software if poss.
OK, you've got me worried now.
I've just checked this
http://www.digitalfaq.com/media/dvdmedia.htm
and think I'll be off tomorrow to buy some new discs.
Thanks for alerting me.
Leanne

Screen flicker while playing ET

I built a new computer about a week ago, and everything seemed to be running fine. Then a dude in my clan told me to update the drivers for the graphics card and said he noticed there was a bios release that was availble for my mobo, and stupid me listened tohim and its been downhill from there.
Windows functions completely normally, as do games such as Call of Duty. However, the primary game I play (wolfenstein enemy territory) is really acting strangely. While playing, there will be polygonal flashes across my screen randomly. Its only affecting ET.
I'm pretty sure my processor is not overheatin and i'm completley sure my graphics card is not everheating. My cpu idles at around 32 and at load has been running at about 42 since i cleaned up my lame initial attempt at wiring my case.
problem exists with version 1.9 and 2.0 of the MSI bios. I've tried using version 4.x of the new ATI catylyst drivers, as well as reverting back to the generally accepted good drivers of ver 3.10. I've also tried switching the AGP from 8x to 4x and back again, all with no effect on ET. I've also reinstalled ET from a completely clean directory, so its not the installation.
my post on sapphire's forums (in case anyone's interested)
http://www.sapphiretech.com/forum/topic.asp?TOPIC_ID=3343
specs
3.0 GHz P4 w/ 800mhz FSB
MSI 865PE Neo2 mobo
1 gig of ram
sapphire 9800 pro
would appreciate any help on this. It doesn't really affect preformance, but its about the most annoyin thing i've seen a game do in a long time.

now thats a real tough one then... did that game actually work before you updated the BIOS? hard to believe, since BIOS updates usually dont f*** with compatibility of games.
why dont you just flash back your BIOS to the version you were using when the game was running problem free? and if that doesnt work, just live with it... there are many other great games out there.
i think helping you would be alot easier if that game havent worked at all, but since you played it on that rig without problems i cant think of any reasons why it shouldnt work anymore just because of an updated BIOS. formating your disk is probably the only thing left to do.
Quote
Call of Duty plays fine with either driver, but still no luck with ET. I wish i could take a screenshot of the vertex flashes, but all screenshots i take appear to be completely normal.
uh, now THATS strange... maybe you're drunk? j/k buddy

My screen locks up while playing words with friends..any idea why?

My screen goes dark while playing and I don't know why or how to fix it. It comes back eventually.

Just the game or the phone as a whole? My guess is you have a hardware failure but there are a few things you can try if it's software such as resetting your phone or doing a restore. To reset press and hold the Home and Sleep buttons for about 10 seconds or so until the Apple logo reappears. To restore do a backup before proceeding:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Back up and restore your iPhone, iPad, or iPod touch with iCloud or iTunes - Apple Support

Screensaver comes on while playing netflix

Similar Messages

Maybe you are looking for