Screensaver displaying wrong pictures
I have my Screensaver set to display a photo album called "Nature" but I notice that other pictures that are not in the Nature album keep popping up when the screensaver is running. I have checked the album on iPhoto multiple times, and these non-nature photos are NOT in the album, at least not in any way I can see with iPhoto.
The non-nature photos are always the same ones and look to come from the same group (or few groups) of other photos. I suspect that the screensaver "thinks" that these photos are in the Nature album.
Why would it think that? And how can I correct this issue?
Thank you.
I have a similar problem. Used to let screensaver take pictures from Aperture. Immediately after installing SL the Screensaver refused to sync with Aperture (not compatible), so I checked AllProject under aperture. Now (may be after upgrade to 10.6.2) it works with Aperture too but Aperture or AllProject always the same story: pictures come from a very limited range and frequently I have 2-3-4 identic pictures on screen....
sure is a bug, they will fix it.
Similar Messages
-
Aperture as screensaver - displaying deleted pictures
Hi,
I have Aperture Library selected as my screen saver. Unless I am cracking up, I am sure that the screen saver is displaying pictures that I have deleted.
Where are they coming from?
Thanks
MSTI have a similar-ish issue. I have two Aperture libraries in my Pictures folder. I have set up a smart album in one of my Aperture libraries, and then I've set my screensaver to run off that smart album.
Unfortunately, what the screensaver seems to do is to apply the rules in the smart album to all the images in my Pictures folder, regardless of which Aperture library that they are in. At least, I see that it displays pictures mixed up from both libraries.
Anybody know how to fix this? -
When I select a photo from the Photo Library, the wrong picture displays. I'm unable to find the picture selected, making it very difficut to apply wall paper or to contacts. Why is this happening?
I restarted the phone and forced the app to close and neither resolved the issue. I then had the bright idea to remove the sync of photos and remove all the photos from the device. I checked the Photos app and it was empty. I then synced again with the photos selected and all the pictures were restored. The photo library now displays the photo I select.
-
Version: iMOVIE 11, 9.0.4
No new updates, 7 sept 2011.
Something is wrong with the project that I am working on.
When I add new pictures and movies, some of them will not be played in the preview or fullmode at all. Some pictures are wrongly understood by iMOVIE or there are some kind of weird errors or bugs in the program. I dont really know what the problem can be. All of the pictures and movies are imported from 2 cameras, Kodak and Canon, and they all work great in iPHOTO.
I also use tranistions, text, etc, to make the movie look good.
Here are some examples of the error, all of these picture where taken while running the preview movie. You can see the moment in the movie process by following the red line in the project field window.
1) Here you can see that it shows the wrong picture in the preview compared to the project field.
2) Here it shows the wrong picture and it also displays the wrong picture in an undesired strecthed mode.
3) Here are 2 examples of one picture that blocks the other pictures from beeing seen in the video.
What could be causing these stupid errors and bugz? Until this is solved I have stopped workoing on my movies and project, awaiting a fast fix.
Thank you!Try this step:
Go to one of the problem points (or even all of the them in the Project Browser) and select it. Under the File Menu>Optimize>Large (960x540). See if will process the clips, still images and try playing it back again.
If Optimize>Large is grayed out, try pulling the clip out of the Project Browser, close iMovie. Open it up again and putting that clip back in its place. Then try to Preview it again and see if playsback properly.
Last thing to try is go to File Menu>Duplicate Project, quit iMovie. Open iMovie, go to the Duplicate Project and see if you get a working Preview from the Project Timeline. -
Report to display a picture from a blob column
hi all
i have a problem :please help
environment: oracle AS 10.1.2.0.2 portal version 10.1.4
i have a slq report:
select field1,field2...,,
decode(cd.photo, empty_blob(),
'<img src="MYCS.show_img?p_field=IMG&p_rowid=NO_CHILD_PIC">',
decode(cd.SOURCE, 'MAIN',
'<img src="MYCS.show_img?p_field=CHILD&p_rowid='||mycs_lib.url_encode(cd.rid)||'" width=160 height=120>',
'<img src="MYCS.show_img?p_field=CHILDARCH&p_rowid='||mycs_lib.url_encode(cd.rid)||'" width=160 height=120>')
) "PHOTO"
from MYCS.mycs_child_details_v cd
where cd.id like :child_id
adn ...
The last field on the (select statement) is a photo(blob type)
NB:MYCS.mycs_child_details_v is a view
trying to create the report i get the following Error:
unable to describe SQL statement. Please correct it (WWV-13010)
Took exception (WWV-13005)
ORA-00942: inconsistent datatypes: expected - BLOB wwv-11230
This report runs without any errors on portal 3.0.9 9i AS
i dont understand what could be wrong here?
is BLOB datatype not supported by/on portal?
is the other way i can display this picture(s)?Jean,
See this thread:
How can I upload/display image within a record ?
Sergio -
When using facetime it only displays a picture and cannot view myself talking
when using facetime it only displays a picture and cannot view myself talking. i can call out but the other person cannot view me. what am i doing wrong? how can i fix this?
See:
* [[Images or animations do not show]]
* http://kb.mozillazine.org/Images_or_animations_do_not_load
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
Lookout displays wrong graphics
Lookout 4.5.1 (18 & 19) sometimes
displays wrong graphics upon
opening a process.
For example it can display 'knifeup'
instead of cumstom .bmp or standard
switches pictures instead of custom
ones, etc.
At the same time .lks is OK.
I have Win98 system running on HP Omnibook XE3
Notebook.
Did anyone experienced the same
unpredictable Lookout behavior?
SergeiTommy,
Obviously you got the NI advise on
not using nested aggregates at the
time they were investigating the problem.
Meantime I got a couple of similar replies
from NI as well.
Finally when I asked them to tell me if I can
expect the fix in near future (my project was
at high risk because I noticed the bug too late),
they sent me lkworks.dll for testing.
It all works fine now. I must admit that
NI 'saved' our project (we successfully launched it
at our plant last week).
I can send you the fix so you could test
it with your project. It would be interesting
to compare our results.
Please let me have your email so I could
send you the file.
Best regards,
Sergei
tommy_scharmann wrote:
> Sergi,
>
> I would like to know who you spoke with at
NI. It was very clearly
> told to me via the NI help line that nested aggregates are not to be
> used with Lookout and that if you use nested aggregates you will get
> unexpected behaviors. Unexpected behaviors included the graphics
> issues, amongst other things, that were not made clear to me. I was
> explicitly told that the help file mention of nested aggregates is
> erroneous!
>
> Please help me to get to the bottom of this issue.
>
> Regards,
> Tommy Scharmann
> -
Album Art Missing / Displaying Wrong Art
I just updated both iTunes and my iPhone to the latest version. After I synched my iPhone, two issues occurred:
1 - The wrong album art was displaying for the now playing song
2 - Then after I synched again, album art is missing for all music, podcasts, video on my iPhone (it is still in iTunes)
Anyone having the same issue or know how to fix this?Same here. The album are is correct in iTunes, but if I play the song from my playlist, I get the wrong picture.
This only happens for the last playlist I created. Earlier playlists I created show the correct album art.
I may try deleting the playlist, and recreating it. -
Wrong picture in AFRU table for scrap...
Hi Experts,
When I confirming co11 and entering scrap, it show wrong picture in AFRU table.
e.g. : For first time i entered 2 scrap.
Seconf time i entered 1 scrap.
But in table it shows 5 scrap.
Which is the right table ? How to finf scrap qty for same prod. order. ?
Yusuf
nullno answer. Closed.
-
Just purchased a new iMac and after transferring all info from my old iMac. Now when using iPhoto slideshow it displays the pictures in reverse order.
There's a bug in iPhoto 9.5.1 and Mavericks that affects slideshows played directly from an album. The slideshow will not play correctly if the photos have been sorted manually. Any other type of sort, date, rating, keyword or title, will play correctly.
If you need that manual sort of pictures for your slideshow create the slideshow in iPhoto's slideshow mode.
OT -
I have an iMac4.1 and my iPhoto is very slow and the thumbnails correspond to the wrong pictures. How do I fix this? Or is my iMac too old? Will getting a new iMac solve this problem?
I realize is only 512MB of memory but I want to make sure that a new iMac will solve this problem. Can the new iPhoto handle 10GB or more of photos? Or do I have to go to Picasa anyways in which case I can buy any computer to do that?The model of Mac is not partcularly relevant, it's the version of the OS and iPhoto that matter.
iPhoto - since 2006 - is good for 250,000 images.
Regards
TD -
I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera. I have a Nikon 5100 DSLR Camera. It always displayed them in the past. How can I get it to display these photos in Bridge and open them in RAW?
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7 Update
Benjamin -
Adobe Premiere Elements 13, will not display video picture, audio only. My videois listed as compatible with Adobe.
douglass
On what computer operating system is your Premiere Elements 13 running? Have you updated 13 to 13.1 yet using an opened project's Help Menu/Updates?
If not, please do so.
You have not given us enough information with which to help you.
What are the properties of your source file that is presenting in the project with audio but no video?
Quickest way to gain that information is from brand/model/settings of the camera that recorded the video.
I am looking for
video compression
audio compression
frame size
frame rate
interlaced or progressive
file extension
pixel aspect ratio
What does the file's thumbnail look like in Project Assets after it is imported....thumbnail with no image (gray), thumbnail with only an audio icon
within it, or other? On the Timeline, what do you see represented in Video 1....nothing as opposed to Audio 1 where you see the audio portion of
the file?
Do you have the latest version of QuickTime installed on your computer along with Premiere Elements 13/13.1? Are you running the programs as
administrator?
Is your video card/graphics card driver version up to date according to the web site of the manufacturer of the card?
Let us start here. Based on your reply details, we will customize troubleshooting strategy for you.
Thanks.
ATR -
I have a MacBook Pro and OS10.6 and am trying to log into a site that requires me to enter a code from a picture ... problem is all I get on the screen is a white '?' in a blue box. What do I need to display the picture?
Reload the page. If it doesn't load, choose Activity from Safari's Window menu, find that picture in the list, and see what it says to the right; this may reveal what the problem is.
(91827) -
Displaying a picture or image in a java server page
I am using tomcat to load my java server pages. I need to display a picture in the page. Can somebody help?
The images are not located on my site, or computer, but rather they are located on different websites. This is what the browser recieves when the jsp runs:
<IMG SRC="http://www.thesite.com/images/theimage.gif"/>
and the site that is running the JSP is:
www.mysite.com/jsp/PicPage.jsp
Is this what you think maybe happening when the browser tries to process the linked image:
www.mysite.com/images/theimage.gif
I don't really understand the nuances of HTML, but if I specify a web address completely in the HTML then wouldn't that specified website be queried for the pictures by the web browser?
Thank you for any help you can provide.
John
Maybe you are looking for
-
Problem in opening GET_TEXTID_TEXT in MAIN Main window
Dear All, We want made some changes in smart form ZCRM_SLFN_ORDER_SERVICE_01. when we try to dobule click on GET_TEXTID_TEXT in MAIN windows, session is hanged for long time and I have end task. Thanks in advance, Nirav
-
Hi Experts i have used RFC in CRM dev system to get the data from R/3 system as follows: CALL FUNCTION 'ZCTP_BP_READ_CONTACT_DATA' DESTINATION w_r3 TABLES t_parnr = t_parnr t_knvk = t_knvk t_adcp_cust = t_adcp_cus
-
My IPad 2 won't stop saying not charging when plugged in any outlet
My IPad 2 keeps saying not charging when plugged in any outlet
-
SQLException: Non supported character set: oracle-character-set-178
Hello, I run a j2ee application on the Sun J2EE Application server. I migrated to 0racle 9.2.0.3. I have an ejb making a connexion with the oci driver and in it I manipulate XMLType: PreparedStatement pst = cnx.prepareStatement(sql); XMLType xt = XML
-
ChaRM with 2 tiers only?
Can ChaRM be configured if i only have a dev & qa system? Or do i need to set it up as dev & prod? I seem to be getting an error about no where for my qa system to export to in the logical component. Is there any way to support this? Thanks in adva