Screensaver not applying with 60+ minute timeout
I am having a strange issue with a screensaver GPO. The GPO is configured to apply the screensaver after 60 minutes and is a loop back policy to override the default 15 minute screen saver lock out. The problem is the screen saver doesn't come on when the
timeout is over 60 minutes. If I change it to anything less it works as expected, the current setting is for 55 minutes and is working. I have unplugged both keyboard and mouse to make sure nothing can reset the countdown. The PC is Windows 7 Pro an is part
of a 2012 R2 domain. I have checked the registry keys, tried it on different computers all the same result.
Hi,
>> The problem is the screen saver doesn't come on when the timeout is over 60 minutes. If I change it to anything less it works as expected, the current setting is for 55 minutes
and is working.
For group policy screensaver settings are configured under User Configuration, here, I want to confirm if this phenomenon happens to all user accounts that apply the group
policy screensaver settings.
Besides, we can try to clean boot the computer to check if this phenomenon occurs.
Regarding how to perform a clean boot in Windows, the following article can be referred to for more information.
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here
Best regards,
Frank Shen
Similar Messages
-
Screensaver/ not working with 2 displays (Boxee, XBMC)?
Hi there, i've got following setup;
2011 iMac 27" at 2560x1440 (Display 1)
Sony 42" LCD connected via MiniDV to HDMI at 1920x1080 (Display 2)
Boxee mediaplayer software for OSX (http://www.boxee.tv/make), however the same issues apears with XMBC software (hereafter Mediaplayer)
Configuration:
- Mediaplayer has been configurated to use Display 2 only
- OSX Screensaver is set to kick in within 5 minutes on Main Screen Only (=Display 1)
- Display sleep is set to kick in at 20 minutes
Issue description:
- Mediaplayer works perfectly, plays movies on Display 2
- However the screensaver does not kick in on Display 1 while Mediaplayer is active, even not after some hours, same for Display sleep
- FYI there are no overlapping items or windows from Display 1 to 2 and vice-versa.
Questions:
Does anybody have a clue what could be wrong here?
How can i blank (or at best turn off) Display 1 while watching a movie on Display 2 either by using standard OSX settings or by some utility?
ThanksHave had same issues trying to edit HD video with Mac Pro system using ATI Radeon 4870 HD, with latest snow Leopard sw rev. SOMETIMES the card works fine- displaying Final Cut Pro Browser video on my 30" Apple cinema display coming out from the multi pin output of the 4870, and a Sony 46" Bravia for client review, via the mini DVI output, using an Apple purchased Moshi, mini DVI to HDMI converter. An earlier posting suggested that the sequence of booting up was the root cause, but I'm not sure about that. Apple FCP support pointed to plist corruption, which also seemed to resolve the problem for awhile, but again, it resurfaced. Now Apple claim that they will not certify that it will provide HD video out from that configuration (mini DVI to HDMI), which is strange since it works, but not consistently. A friend who has the same card, suggested root cause may be that Quartz Extreme support under my System Profiler / Hardware / ATI Radeon 4870HD is missing! Another person reported that when he upgraded recent SW, it disabled Quartz Extreme- not sure whether this is root cause yet or not. Still not resolved. Suggestions welcome.
-
Screensaver Not Applying to All Workstations
Hi,
I setup our user policies to enforce a password protected screensaver
(logon.scr)under Windows Desktop Preferences setting. It seems to work
ok, but it isn't being applied to all workstations. The settings are
consistantly applied to most workstations, but there are some
workstations that just will not accept the settings. Has anyone run into
this particular problem before?
We're running Netware 6.5 sp4 and ZENworks 6.5 SP2. Workstations are XP
SP2 running the latest Agent and the "Always update destop settings on
eDirectory authentication" checkbox is selected.
Thanks,
Johnjohn.simmens,
> It seems to work ok,
> but it isn't being applied to all workstations. The settings are
> consistantly applied to most workstations, but there are some workstations
> that just will not accept the settings. Has anyone run into this
> particular problem before?
Yes, I have seen this a lot when using Desktop Preferences. I prefer to
use group policies to distribute screensaver settings.
Do check under desktop prefs, the option, always update on edirectory
authentication. Make sure this is checked, it could help.
Jared Jennings
Data Technique, Inc.
Novell Support Forums Sysop
http://wiki.novell.com -
Web Mail changes not applying with Blackberry
I'm using BIS & BES Mail accounts with Blackberry Curve 8520 ( Blackberry OS version is 5.0.0.1036 ) . BES Email is working perfectly. with BIS I've configured my Live Mail account. ( [email protected] ) . I can send & receive the Mails thorugh Blackberry as well. But Some times I"m accessing my Live mail from Web Broweser also. then I'm doing delete , read & file some emails. But it is not effect / Sync with BlackBerry. still it is show in INBOX & show as Unread. it is very diffiuclt to maintain.
I tried with reconfigure it thorugh BIS Protal & resent Service Books as well. but it doesn't success.
Please give a solutuion .
Regards,
COMDINIDue to security vulnerabilities, rolling back to Firefox 4.0.1 is not recommended.
Does your work webmail use a common interface like Outlook Web Access or Google Apps? Perhaps there is a workaround. -
Font style can not applied with the eye dropper ??!
I am working with font "not a free one" and it has a problem that I can not take its style with the eye dropper,
it only gives the same font name but the shape of font did not appliedIt's necessary to know if the text is under Illustrators full control or if the other program interferes.
Also it's still not quite clear what exactly you are doing in which order.
Are you using character and paragraph styles?
Normally if you select words or paragraphs with Illustrators text tool, you can pick up styles from other texts with the eyedropper. So how exactly are you using the tools? -
11.2.3 security policy not applying
This was in another post felt it need its on post and subject.
11.2.3 has help, but now on device that have 11.2.3 the security policy is
not applying. I have 4 device I'm testing on one was a clean instill of
11.2.3 the other 3 were upgraded, out of all 4 only one the security policy
is applying right. Where would the security policy be store when it is
applied to a device. Is their a better way to apply security policy.
I found that the gpttmpl.inf file is not being copy to the
[C:\Windows\System32\GroupPolicy\Machine\Microsoft\ Windows NT\SecEdit]
folder and did confirm that it is in the zcm meachine cache folder
[C:\Program Files
(x86)\Novell\ZENworks\bin\handlers\CacheFiles\Work stationCache\GroupPolicy\M
achine\Microsoft\Windows NT\SecEdit]. I manual copy it to the SecEdit
folder
logged off back on and then did get the Security Options Settings set
properly.
So why is it not copying it over, the Registry.pol file is and all other
group policy are working (so far). And on the one computer that Security
Options is working right on and running 11.2.3 the gpttmpl.inf is not in
the
[C:\Windows\System32\GroupPolicy\Machine\Microsoft\ Windows NT\SecEdit]
folder ether and I have checked computers that are still on 11.2.0 and the
Security Settings are applied but the gpttmpl.inf file in not in the
[C:\Windows\System32\GroupPolicy\Machine\Microsoft\ Windows NT\SecEdit]. Is
ZEN suppose to copy gpttmpl.inf to the system32 group policy folder and if
so can this be fix? I really need Security Settings to apply.
Hope this makes sense.
And I have this problem on both 32 & 64 bit windows 7
I don't know if this affects Windows XP because I don't have any Security
Settings for XP set.
Thanks
ScottWell I found this in the ZCM troubleshooting guide with the help of google
[When more than one Windows Group policy is applied to a device, the
security settings of the last applied policy are effective on the device.].
I have all ways had device first user last sense 10.3.3 - 11.2.0 and the
security policy did apply, at lease with WIN7. So on my test machines I
change it to user fist device last and now the security policy now works
with 11.2.3, but I still have to have a bundle to run gpupdate /force at
user login. If I done have the bundle to run the device group policy does
not apply sometime, I don't mine to have the bundle to run just why with
win7 is does not apply with out it and XP does with out it.
Also why does it not copy the gpttmpl.inf to
[C:\Windows\System32\GroupPolicy\Machine\Microsoft\ Windows NT\SecEdit]
directory?
>>> On Friday, March 15, 2013 at 12:34 PM, in message
<[email protected]>, Scott Malugin<[email protected]> wrote:
> This was in another post felt it need its on post and subject.
>
>
> 11.2.3 has help, but now on device that have 11.2.3 the security policy
> is
> not applying. I have 4 device I'm testing on one was a clean instill of
> 11.2.3 the other 3 were upgraded, out of all 4 only one the security
> policy
> is applying right. Where would the security policy be store when it is
> applied to a device. Is their a better way to apply security policy.
>
>
> I found that the gpttmpl.inf file is not being copy to the
> [C:\Windows\System32\GroupPolicy\Machine\Microsoft\ Windows NT\SecEdit]
> folder and did confirm that it is in the zcm meachine cache folder
> [C:\Program Files
> (x86)\Novell\ZENworks\bin\handlers\CacheFiles\Work stationCache\GroupPoli
> cy\M
>
> achine\Microsoft\Windows NT\SecEdit]. I manual copy it to the SecEdit
> folder
> logged off back on and then did get the Security Options Settings set
> properly.
>
> So why is it not copying it over, the Registry.pol file is and all other
> group policy are working (so far). And on the one computer that Security
> Options is working right on and running 11.2.3 the gpttmpl.inf is not in
> the
> [C:\Windows\System32\GroupPolicy\Machine\Microsoft\ Windows NT\SecEdit]
> folder ether and I have checked computers that are still on 11.2.0 and
> the
> Security Settings are applied but the gpttmpl.inf file in not in the
> [C:\Windows\System32\GroupPolicy\Machine\Microsoft\ Windows NT\SecEdit].
> Is
> ZEN suppose to copy gpttmpl.inf to the system32 group policy folder and
> if
> so can this be fix? I really need Security Settings to apply.
>
> Hope this makes sense.
>
> And I have this problem on both 32 & 64 bit windows 7
> I don't know if this affects Windows XP because I don't have any
> Security
> Settings for XP set.
>
>
> Thanks
> Scott -
Hi
We use Windows SP1 with one folder from the User HomeDirectory set to be available offline.
The problem we encounter is that when going from Offline to Online via VPN, there is a 2 minutes delay for the drive where the offline folder is located to be available again. Other drives mapped at VPN connection time are available immediately
after we applied KB2705233. Only the drive that contains the folder that we make available offline has this delay issue.
I found out KB2663418 but it does not apply as we have Windows 7 SP1. However the symptoms are the same:
< This issue occurs because the client-side caching (CSC) interface tries to reconnect to the source before the network is actually available. This behavior causes the SMB cache to enter a negative state. In this situation, the CSC interface tries to
reconnect to the source on the next 2-minute retry interval.>
Does one know how to force a check of the connectivity or if there is another fix available ?
thanks in advance
brunoHi,
Why KB2663418 didn't applied to your computer? It applied to
Windows 7 Service Pack 1, when used with:
Windows 7 Enterprise
Windows 7 Professional
Windows 7 Ultimate
Did you use Windows 7 Home Basic or Home Premium? However, Windows 7 Home Basic and Premium does not support Offline Files.
Thus please try that hotfix.
Karen Hu
TechNet Community Support -
Sysprep unattend file not applying when image is captured with wds (no errors)
So I've been around the block a bit using sysprep and wds. Recently I've created a reference image with a virtualbox environment using windows 7 x64. I was succesfully able to create a reference image, sysprep it and capture it to the wds server. My
plan there after was to create driver specific images for each model computer we use here after not having much success using the driver store (another story)
Any how So I take my reference image and deploy it to a new computer... In this case an HP Probook 5310m. Install any missing drivers and Sysprep it with the following command. sysprep /generalize /oobe /unattend:unattend.xml /shutdown
Below is the sysprep file I have been using
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="generalize">
<component name="Microsoft-Windows-Security-SPP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SkipRearm>0</SkipRearm>
</component>
<component name="Microsoft-Windows-PnpSysprep" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DoNotCleanUpNonPresentDevices>true</DoNotCleanUpNonPresentDevices>
<PersistAllDeviceInstalls>true</PersistAllDeviceInstalls>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SkipAutoActivation>true</SkipAutoActivation>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<ShowWindowsLive>false</ShowWindowsLive>
<TimeZone>Eastern Standard Time</TimeZone>
<CopyProfile>true</CopyProfile>
<ProductKey>74fdj-7dtw8-q9mp9-ypth8-qb27y</ProductKey>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<OEMInformation>
<Logo>c:\windows\system32\oemlogo.bmp</Logo>
<SupportHours>Regular Business Hrs (Overnight Support Provided)</SupportHours>
<SupportURL>url</SupportURL>
<SupportPhone>Phone number</SupportPhone>
</OEMInformation>
<OOBE>
<HideEULAPage>true</HideEULAPage>
<NetworkLocation>Work</NetworkLocation>
<ProtectYourPC>1</ProtectYourPC>
<HideWirelessSetupInOOBE>false</HideWirelessSetupInOOBE>
</OOBE>
<UserAccounts>
<LocalAccounts>
<LocalAccount wcm:action="add">
<Password>
<Value>TAAxAEQAMwBzAHQAcgBpACEAUABhAHMAcwB3AG8AcgBkAA==</Value>
<PlainText>false</PlainText>
</Password>
<Description>Local Administrator</Description>
<DisplayName>Root</DisplayName>
<Group>Administrators</Group>
<Name>Root</Name>
</LocalAccount>
</LocalAccounts>
</UserAccounts>
<TimeZone>Eastern Standard Time</TimeZone>
<ShowWindowsLive>false</ShowWindowsLive>
<FirstLogonCommands>
<SynchronousCommand wcm:action="add">
<Order>1</Order>
<CommandLine>slmgr.vbs /ipk {serial key}</CommandLine>
</SynchronousCommand>
<SynchronousCommand wcm:action="add">
<Order>2</Order>
<CommandLine>slmgr.vbs /ato</CommandLine>
</SynchronousCommand>
</FirstLogonCommands>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UILanguageFallback>en-US</UILanguageFallback>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<cpi:offlineImage cpi:source="catalog:v:/sources/install_windows 7 professional.clg" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
The machine succesfully syspreps and shuts down. I restart the computer pxe boot and capture the image succesfully.
Now here comes my problem...
Upon deploying the above driver specific image.. my sysprep file is not applied. Nothing from the OOBE wizard answers to the pc logo , or first logon commands are applied ... nothing.. I have gotten no errors during this whole process. I have
started to try to read the logs within the panther folder but havent gotten far.
What is weird to me is that I have tried recreating this image... deploy the reference image... add drivers ... sysprep ...shutdown. And if I boot normally (without capturing the image) the computer shows all of the sysprep changes.. Only when
i capture the image does it not apply the changes....
I'm stumped...
Any ides?Confirm this scenario: You installed Windows, then ran sysprep and used the /unattend switch. Then you captured the image.
In this scenario there are 2 deployment methods.
1. If you deploy the image with DISM, the answer file generated by sysprep is detected on first boot and settings are applied. It is the same function as if you ran sysprep and chose to restart.
2. If you deploy the image using Setup.exe, it does not use the answer file specified by sysprep prior to capturing. I have not looked into *why* this happens, but I suspect that after the image is applied, it replaces the unattend.xml with the generic one.
If you are using Setup.exe, you need to use its /unattend switch and point to the answer file location. This location cannot be inside of the image. If you are not using setup.exe in a manual method (using WDS) you will need to apply the answer file to the
install image in the WDS snap-in. -
Hello I have a problem with my ipod touch 1G the problem is that see me key to the floor! And when recogi not prendia after 5 minutes prendio but it gave to me the surprise of which the battery had finished completely! What I did was to set it to load with the USB but do not load the battery me the icon of the battery appear and below of her the beam that indicates that this being loaded but this way I have left it the whole yesterday and what goes of today and continues without loading anything! They can help me porfavor I am grateful for them to him very much! And my PC does not detect it not itunes
Try the not-charging topic of:
iPod touch: Hardware troubleshooting
It could be that the battery is dead. -
I have one problem with Data Guard. My archive log files are not applied.
I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap -
I am looking at an issue with users not getting specific group policies.
After searching a number of client computers I found that the following error
The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
I can find the folder in the Sysvol folder on all of the domain controllers.
The issue with end users seems to be that the proxy settings for internet explorer is not being applied.
Potential problems?
one folder in sysvol entry is empty
\\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
or is this our issue
The old method of configuring proxy settings to Internet Explorer 9 has changed?
https://support2.microsoft.com/kb/2530309?wa=wsignin1.0
http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas???? -
Tried to use 'render/lighting effects' on 5 more or less new different laptops now. All kind of Window versions.
They all have at least 4GB RAM. The Graphic Card is compatible.
Layer to work on is RGB-Type.
It's all about Photoshop CC 2014, trial version.
When I go to 'Lighting effects' it says first:
'The 3D features require that 'Use Graphics Processor' is enabled in the Performance preferences. Your video card must meet the minimum requirements and you may need to check that your driver is working correctly.'
- I switched the 'Use Graphics Processor' on and off and restarted new - nothing happens.
- Video card is compatible.
Second it says:
''Could not apply the workspace because there is not enough memory (RAM)'
- RAM on all the computers I tested it with is at least 4GB
Please help!We would need to know the amount of Video ram you have. If it is above 512 MB, then check for driver updates.
Windows OS
Click Start.
On the Start menu, click Run.
In the Open box, type "dxdiag" (without the quotation marks), and then click OK.
The DirectX Diagnostic Tool opens. Click the Display tab.
On the Display tab, information about your graphics card is shown in the Device section. You can see the name of your card, as well as how much video memory it has.
Once you know the kind of graphics card you have, visit the manufacturer's website to download the latest driver. Here are links for downloading drivers from the most common graphics card manufacturers:
NVIDIA: http://www.nvidia.com/content/drivers/drivers.asp
AMD: http://support.amd.com/en-us/download
Intel: http://support.intel.com/support/graphics/ -
Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative. -
Hi,
I have a windows service written in .Net which access a COM component(This conponent is also written by me).
The COM component launches Acrobat and uses it for generating Thumbnail files.
I get following error is logged into event viewer when CreateDispatch("AcroExch.App", &e)) line is exicuted.
Error Message: The server {85DE1C45-2C66-101B-B02E-04021C009402} did not register with DCOM within the required timeout.
This problem occurs only when the windows service run under a specified user account say "TestUser". i.e if service runs under "Local System" account then everything works fine.
Also this problem only occurs on WinXP machine. i.e same thing on Windows2003 server works fine.
I have given all required permissions for "TestUser" on AcroExch.AVDoc and AcroExch.PDBookmark using dcomcnfg.
Any help will be appriciated.
Thanks and Regards,
Anand Mahadik.Hello,
start by running sfc /scannow to check if there is corrupt system files.
If this does not hellp, I recommend performing an in -place upgrade of your OS.
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner 2010 / 2011
Microsoft Certified
Professional
Microsoft Certified
Systems Administrator: Security
Microsoft Certified
Systems Engineer: Security
Microsoft Certified
Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft Certified
Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft Certified
Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft Certified
Technology Specialist: Windows 7, Configuring
Microsoft Certified
IT Professional: Enterprise Administrator
Microsoft Certified IT Professional: Server Administrator -
Windows Server 2012 becomes slow and unresponsive, event logs show DCOM errors in event logs. After server reboot server works normally.
Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 10/28/2014 9:06:32 AM
Event ID: 10010
Task Category: None
Level: Error
Keywords: Classic
User: NETWORK SERVICE
Computer: ServerName
Description:
The server {1F87137D-0E7C-44D5-8C73-4EFFB68962F2} did not register with DCOM within the required timeout.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
<EventID Qualifiers="0">10010</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2014-10-28T13:06:32.743836700Z" />
<EventRecordID>165767</EventRecordID>
<Correlation />
<Execution ProcessID="760" ThreadID="5560" />
<Channel>System</Channel>
<Computer>ServerName</Computer>
<Security UserID="S-1-5-20" />
</System>
<EventData>
<Data Name="param1">{1F87137D-0E7C-44D5-8C73-4EFFB68962F2}</Data>
</EventData>
</Event>Hi Avinash,
If this issue occurs again, please follow steps below to troubleshoot it,
Use the GUID in the error message to find what application it is.
Using Regedit, navigate to the following registry value:
HKEY_CLASSES_ROOT\CLSID\clsid value\LocalServer32. The clsid value is the information displayed in the message. Such as, {3EB3C877-1F16-487C-9050-104DBCD66683}
In the right pane, double-click
Default. The Edit String dialog box is displayed. Leave this dialog box open.
Click
Start, and then click This PC.
Using the information displayed in the
Value data box of the Edit String dialog box, navigate to the program.
Right-click the program name, and then click
Properties. The Properties dialog box for the program is displayed.
To determine who the vendor is for this program, refer to the
Version tab.
If you can’t find the file in the corresponding path, please replace with a good file.
Check if the related service have started. Stop and try to restart it.
If you have 3<sup>rd</sup> party applications, please disable it temporary, to see if this issue was caused by them.
For more details, please refer to links below, it provides more possible causes about event ID 10010.
DistributedCOM Error ID 10010
https://social.technet.microsoft.com/Forums/windowsserver/en-US/77b1db1d-f186-4515-8f7d-2241942eb9b7/distributedcom-error-id-10010?forum=winservergen
Best Regards,
Tina
Maybe you are looking for
-
Error While entering data in VA01
Hi, I get the following error while entering data for "Plant" in Sales order creation (VA01). Can anyone please tell me how to solve this problem. Runtime Errors SAPSQL_INVALID_TABLENAME Except. CX_SY_DYNAMIC_OSQL_SEMANTICS Date and Time 27.04.2009 1
-
Web services and Application Integration in Netweaver
I want to create Web services in Netweaver. Just something simple to begin with. But I need to be able to: Create the service Call the service Register the service [UDDI], and Expose the service the service using WSDL. And explain the whole thing in
-
How can I use Object's methed by OO4O
I have done a type as following create or replace type classteacher as object tchid number, tchname varchar2(30), tchhomepage varchar2(100), tchsex varchar2(4), member procedure getCourseList(crslist out sys_refcursor) and the method is define as fol
-
Javax.naming.InvalidNameException when deploying JCA project
Greetings, I have found the "JCA on EP6: Building Portal Applications with Remote Function Modules" (Mar'04) to be one of the clearest documents on how JCA from EP works. I also found the sample jca package package that comes with it to be one of the
-
Any BAPI/function module to change Billing document
Is there any BAPI / FM to change the Billing document once it has been created ? Your help is appreciated. Regards, Ankur Bhandari