Screensaver not working since update of Adobe Flash

I have a screensaver that I downloaded last year that won't
work now after the adobe flash install. It gives an error message
of "Macromedia not found". Does anyone have any ideas?

Force iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

Similar Messages

  • Since updating my adobe flash player I am having trouble with gmail, google, hotmail, etc.

    Since updating my adobe flash player a couple of days ago some of my web pates are acting strangely. One that is not a big deal, but is strange is that my the google logo is missing from the main google search page. Another is that I cannot login to hotmail at all. I just get a blank screen. When I check my gmail account I can only use the basic html page. When I go to the adobe flash test page it says that everything is working fine. I have the latest firefox. Is there a web page where I can go to check my current firefox to make sure it's working?

    If you are not the administrator of this computer, you need the administrator to do this..

  • Hi. I am not able to update the Adobe Flash Player on my MackBook Pro. The problem I am getting is a blank page for Step3. Can someone help please?

    Hi. I am not able to update the Adobe Flash Player on my MackBook Pro. The problem I am getting is a blank page for Step3. Can someone help please?

    If you already have an older version of Flash Player, open the Preference pane and select Check Now... under the Update portion under the General tab:
    You shouldn't have to install a new version from the website (I'm not even sure if you can) if you've already installed Flash Player.
    Clinton

  • Photoshop not working since updated Aperture software

    I have been using photoshop CS5 within Aperture for over a year now.
    Unfortunately Photoshop has stopped working properly since I updated the Aperture software to the latest version.
    I am trying to do some selective colouring but the brush tool is not working.
    Thank you!

    Fern1 wrote:
    I have been using photoshop CS5 within Aperture for over a year now.
    Unfortunately Photoshop has stopped working properly since I updated the Aperture software to the latest version.
    If it is the Photoshop program not working, then resetting the preferences would be the first thing to try if you have already checked any tool options and layer settings that may be creating a problem.
    Pressing the 'Option + Command + Shift' keys immediately after launching Photoshop will invoke the reset dialog before Photoshop loads it's UI. Use the options to reset as needed. Here is a link to the help file for more info:
    http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab 64-74aaa.html
    I am trying to do some selective colouring but the brush tool is not working.
    Are you referring to Photoshop here or Aperture (both have brush capabilities)?
    Note - there is currently a known issue with Aperture 3.2.3 that can cause issues with external editors and plug-ins:
    http://support.apple.com/kb/TS4237
    Hope that helps.

  • Hdmi does not work since updating to jelly bean

    Since updating my at305-16 to JB hdmi will not work . I go into settings and select hdmi out but get no signal on tv.

    I think it might be a JB driver issue. I was having the same problem connecting it to my LCD, but when I switched to my plasma it works. The LCD is 1080P Auto the plasma is 720P auto. But fropping my LCD to 7120P didn't help. I don;t know if you have two TVs to try on, but it couldn't hurt.

  • Tv adapter not working since updating ios

    since  updating my iPad 2  to iOS 8 my tv adapter no longer works, when I plug the adapter in a message comes up stating this device is not supported by apple

    Hello jimtallis,
    The steps detailed below may help get your TV adapter to function correctly.
    Check the compatibility
    Make sure the accessory is compatible with your device. If the accessory is on the Apple Online Store, you can see if your iPhone, iPad, or iPod touch model is listed as compatible.
    If your accessory uses the 30-pin connector, you might be able to connect it to your device using the Lightning to 30-pin Adapter or Lightning to 30-pin Adapter (0.2 m).
    See if your accessory's compatibility is limited. For example, some accessories might not charge iOS devices if they use FireWire instead of USB to charge.
    Disconnect and inspect the accessory, then restart your device
    Disconnect the accessory and turn it off, if possible.
    Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
    Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
    Try a different device
    Make sure the issue is with the accessory, if possible. Always use an identical or similar, compatible device with the accessory you're troubleshooting.
    If there's static coming from the left audio channel when you use headphones, try connecting the headphones to a similar device.
    If the device isn't syncing when connected to the dock, connect it directly to the computer using the Apple 30-pin to USB Cable or try another USB port.
    If you're using Lightning to 30-pin Adapter in a connection chain, try using the same adapter on a similar or identical device.
    Restore iPhone, iPad, or iPod touch
    Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
    Resolve issues with iPhone, iPad, and iPod touch accessories
    http://support.apple.com/kb/TS2634
    Cheers,
    Allen

  • Wi-Fi Not working since update 2.3.5

    Since updating Android OS to version 2.3.5 I have not had any function in my wi-fi radio. System attempts to scan and never recognizes ANY wifi networks.
    Tried entering/ managing setup manually, but network is listed "Out of Range" even when network is confirmed up by many other devices.
    Any ideas, patches or advice?
    *Wifi worked fine before update

    The obvious painful advice is: Try a hard-reset. If that doesn't do it, it might be time to call VZW support and get a replacement.
    When you installed the update did it appear to install correctly, no error messages or anything?

  • ITunes not working since update, says I don't have insufficient privileges to access directory

    Ever since the iTunes update it has not worked at all for me. So I uninstalled and tried to reinstall but it will not let me. I always get this pop up "The installer has insufficient privileges to access this directory: C:\Program Files\iTunes. The installation cannot continue. Log on as administrator or contact your system administrator".    I am logged on as the administrator and I have turned off my antivirus. Somebody please help!

    tunes. 9..1.1 insufficient privileges error for corefp -- itunes

  • Alt+Scroll do not work since updated to firefox 17.0

    Usually I use Alt+mouse scroll to scroll one line in firefox, but since updated to firefox 17.0, it do not work anymore, even in safety mode.

    It's ok now, thank you very much!

  • Exchange email not working since update

    Help! Before the update, my POP accounts weren't working (wasn't receiving new email unless I turn phone off and back on). Now POP seems to be working, but my corporate Exchange account is totally not working. There is a (new) yellow banner message that appears in email list saying Connecting to Server. And then it seems to get stuck there. It somehow downloaded 1 message (the first one that came in) since the update of my phone this morning. But since, it won't Push any more email.
    Also, I think my GPS got worse. When I was outside earlier (granted, I was around tall buildings) it wouldn't get a lock--not even after 5 minutes. WIll have to test further.

    Thanks for the tip.
    I was having the same problem, although it was kinda nice in a way not to be getting instant email notification.
    But I'm back to normal.
    Uninstalled and installed and my nose is back on the grindstone.

  • App update not working since updating software

    My app update is not working ever since I uploaded the new software last week.  Any suggestions?

    You may want to Reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings will be reset.

  • Phonebook/contacts not working since update

    My phonebook/contacts has stopped working, so I can't call or find numbers. All this since the update, everything else seems fine at the moment.

    Hi,
    I'm a bit confused, how do you mean that it does not work? What happens when you enter the phonebook, do you receive any error message?
    Where is the contacts stored? Do you sync via Gmail or an Exchange account or is it local contacts? After the repair, did you restore any backup were your contacts was stored?
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • My HP C4600 is not working since updating to 10.10.2

    My HP C4600 all in one printer is not correctly aligning, nor can I fix the issue by realigning, since updating to 10.10.2

    in addition, my internet now seems to be intolarably slow! Frankly, the new operating system 10 has been a total nightmare from the get go. I keep updating in hopes of getting back to Mac as I knew it, and it just causes more and more issues!!!!!!!

  • Signature field NOT working since upgrade to Adobe Pro X

    Hi Forum,
    Form stop working since upgraded to Pro X (ver 10) in Adobe.  Getting this message:
    IntegriSign
    This plug-in is intended for validating signatuers signed using earlier versions of Acrobat.  To sign using this version of Acrobat use "IntegriSign to Acrobat 9.0 and later" handler
    I have changed settings in Adobe Pro X to the above but still get the same message.
    Do anyone know how to fix this?
    Thanks,
    Patricia

    Download directly from Apple and install over what you have now;
    iTunes 12.0.1

  • Camera not working since update 8/3/12

    After an auto downloaded update yesterday, my camera
    does icon button does not work from the touch screen anymore
    Any ideas?

    Hi Mr trrlightning, I did reboot yesterday after the update & it was ok then when I used it, but today it would not work from the touch screen icon. However I did do as you sugested & hey prestow! I now have my camera back.
    Many thanks.

Maybe you are looking for