Screensaver on ATV2 causes connection loss?

So I've officially narrowed it down that any time I run the screensaver on my ATV2 I lose the HDMI connection between the ATV2 and my receiver. If I even preview the screensaver, after about 2 minutes my TV will blue screen, which indicates there is no signal. The ATV2 light stays lit, but nothing restores the connection except resetting (down+menu till the light strobes). This also tells me that there isn't a problem with the actual connection since it restarts just fine. I can watch movies and stream music with no problems. While streaming music from my iTunes, I need the screensaver so that I don't get IR on my plasma. Again, streaming music without the screensaver results in no issues. I just streamed 25 songs straight w/ Genius with no problems.
Has anyone experienced this or does anyone have any idea why or what may be causing this? Thanks in advance.

Try switching WiFi on and off on your Mac instead, that usually does the trick for me.

Similar Messages

  • Internet connection loss using Airport Extreme and Netgear DG843

    Hello,
    I am accessing internet via a Netgear DG834 router (not wifi), connected to an Airport Extreme base station. Most of the time, I can access internet through the Wifi network of the AEB without any problem. But around once a day I am experiencing connection loss and the only way I found to restore it is to reset the Netgear Router by physically unplungging it.
    Both the Netgear and the AEB have up to date firmware, so I suspect some kind of problem in my setup, as I am not an expert in setting up networks.
    Is it possible that using a Netgear Router connected to the AE (which is also a router if I understand correctly) could cause connection problems ?
    I am at a loss, and do not even know how to describe the relevant informations of my current setup. If a kind soul could help me nonetheless, I would be very gratefull.
    Mr Pedrito
    Powerbook G4   Mac OS X (10.3.9)  

    Is it possible that using a Netgear Router connected
    to the AE (which is also a router if I understand
    correctly) could cause connection problems ?
    Yes.
    Ensure that that the AEBS is configured to not distribute IP addresses.
    Also ensure that the AEBS is on a different channel to the DG834G.
    iFelix

  • Airport + WDS: Internet connection losses

    Good morning all!
    I have a WDS network with
    - one Airport Express (Called "A") used to ditribute an Internet connection. This is the WDS main station.
    - one Airport Express (Called "B") that extends the initial network AND that streams audio with Airtunes. It is a WDS remote station.
    When I surf the net (via "A") during a song is streamed on "b", I loose my IP address, the audio stream is down, the Internet connection too, and I must ask a new IP address (via the "repair" button) to restart a new stream on "B".
    Each time I click on a link the same problem repeats!
    Could somebody tell me how I could solve this problem please?
    Thank you so much and best regards,
    Geoffrey

    I am going under the pretense you have seen this set-up diagram.
    http://docs.info.apple.com/article.html?artnum=107454
    Be sure to take special care to read this set-up thoroughly. As another point of interest sometimes Interference can cause a loss of or interuption in the signal. Sometimes a simple relocation of the main can do the trick, while at other times it may require you to find and eliminate this issue such as.
    http://docs.info.apple.com/article.html?artnum=58543
    The above link will give you some guidelines to follow.
    Good Luck Don

  • Folders being closed upon connection loss?

    The issue is that previously it would bring up an error saying that connection was lost and would still show the folders but without any contents, and it would've been possible to do a refresh when you'd have a connection, now it instantly brings to Network folder.
    Update:
    Previously before the OS reinstall, I've tested what's causing the CPU usage to go up so high using ProcessExplorer, and found out that explorer.exe is using too much services/libraries, mainly ntdll.dll, which is being looped constantly, i.o. ntdll.dll would be copied and copied and copied until you'd restart the process (explorer.exe) 

    Hello,I'm currently having an issue with a user that is often on the road and obviously it's often that connection is being lost. That person often opens a lot of folders that we have on our local file server, and as soon as his connection is lost it brings him to the "Network" folder. Any idea what could be the issue? Also CPU would rise up to a %100 in total (File explorer .exe consuming approx. 40-60% because explorer.exe has a looping ntdll.dll library being looped in its process).He uses a Dell XPS 13 ultrabook with a four core i7 processor.Before connection loss:After connection loss:
    OS: 8.1 Pro (Latest updates)File server, DC&AD: Win Server 2012 R2, Folder share.
    What has been tried:sfc /scannowOS reinstall
    This topic first appeared in the Spiceworks Community

  • Windows server 2012 and windows xp remote desktop connection loss

    I am having this problem for a month now, and i am stumped with trying to find an answer . I have talked with several network admins in my area and with no luck i have not found a solution. I have a windows server 2012 placed with 5 pcs that are connected
    on a local network , those 5 pc's connect to the server via remote desktop. List of pc's:
    1x Windows 7
    4x Windows XP SP3
    All have the latests network drivers, all have the latest version of remote desktop installed. All have been scanned for viruses. All have antivirus software.
    Problem is the 4 XP machines lose connection on when connected via remote desktop. If one starts losing connection the other 3 start to lose the connection aswell. The windows 7 machine is not affected by this it works fine.
    What have I tried:
    Scanning for viruses.
    Disabling Firewall and antivirus software.
    Updating all drivers.
    Did many changes to group policy like keepalives etc.
    Turning off SMBv2 SMBv3.
    Turning off network adapter Offload settings.
    Changed some registry settings like keepalive, smb etc.
    Updating every pc and server with all windows updates.
    Changed the router and switch.
    Port forwarded needed ports like 3389.
    Updating remote desktop to 7.0.
    I might be forgetting some stuff i will add as i remember anything.
    So the thing is this. I use a Windows XP machine from my office I remotely connect to the server via the Internet and I DO NOT experience any connection loss. BUT the XP machines on the local network constantly experience connection loss via remote desktop.
    I pinged every Machine from the server via CMD command PING. So when they lose connection the Packets get time outs . Packets get dropped between 1-10 packets when a connection is lost. This packet drop does not occur when using the internet or anything else.
    ONLY when connected to the server via remote desktop. The packets get dropped at random intervals.
    Problem is I use an XP machine and I am not experiencing any loss of connection , while the XP machines on the local network experience it , but not the windows 7 machine.
    Router is ASUS RT-N53 , and switch is Dlink DES-1008D. Server is a Dell PowerEdge T110 II.
    Can someone please tell me what can i do to solve this problem?

    So today got some word from their office. They were using RDP from 8AM until 12PM all was working fine. Then got back after lunch about 1PM and got a few connection lost errors when they tried using RDP again. Its weird since they didn't have disconnects
    in the morning, and started having them after lunch.
    Also noticed, that two pc were not using RDP and were disconnected as shown in task manager. And they still got request timeouts.
    Maybe this is not a remote desktop issue?
    TASK MANAGER
    The 2 disconnected pc's ping screens:

  • Connection loss SUM GUI to SL Controller

    Hi experts,
    I am experiencing an issue that I need to resolve. It is that I lose the connection from SUM GUI (locally) to the SL Controller running on the remote server.
    Currently I am doing an upgrade and after some time, e.g. when I have an error and don't notice it immediately, I get a warning message.
    "The connection to the SL Controller is down.
    The SDT GUI will reestablish the connection, when possible."
    On the server I get the following error message:
    May 26, 2014 7:49:47 AM [Error]: com.sap.sdt.engine.core.communication.FactoryAlreadyRegisteredException: Factory for key 'com.sap.sdt.engine.core.com
    munication.FactoryKey@13c2c5f4' is already registered.
    May 26, 2014 7:49:47 AM [Error]: com.sap.sdt.engine.core.communication.FactoryAlreadyRegisteredException: Factory for key 'com.sap.sdt.engine.core.com
    munication.FactoryKey@13c2c5f4' is already registered.
    May 26, 2014 7:49:47 AM [Error]: com.sap.sdt.server.core.ServerException
    May 26, 2014 7:49:51 AM [Warning]: Connection has been shutdown: javax.net.ssl.SSLException: java.net.SocketException: Broken pipe
    May 26, 2014 7:49:51 AM [Warning]: Error while closing connection.
    May 26, 2014 7:49:51 AM [Error]: com.sap.sdt.engine.core.communication.SendException: Error while sending data.
    Network input/output exception has occurred: Connection has been shutdown: javax.net.ssl.SSLException: java.net.SocketException: Broken pipe
    javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: java.net.SocketException: Broken pipe
    javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: java.net.SocketException: Broken pipe
    javax.net.ssl.SSLException: java.net.SocketException: Broken pipe
    java.net.SocketException: Broken pipe
    May 26, 2014 7:49:51 AM [Error]: com.sap.sdt.engine.core.communication.SendException: Error while sending data.
    Network input/output exception has occurred: Connection has been shutdown: javax.net.ssl.SSLException: java.net.SocketException: Broken pipe
    javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: java.net.SocketException: Broken pipe
    javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: java.net.SocketException: Broken pipe
    javax.net.ssl.SSLException: java.net.SocketException: Broken pipe
    java.net.SocketException: Broken pipe
    My current assumption is that the firewall drops the connection due to inactivity.
    The main issue then is:
    although I restart my local SUM GUI and reconnect to the server I can't continue the upgrade because the Buttons are "unclickable" (grey).
    Currently I always had to restart SUM including the services on ther server (SL controller).
    My question is:
    what can I do to avoid this connection loss?
    Is there a option to set a "keep alive" to the network connection?
    so that the firewall does not validate the connection as idle and drops?
    Unfortunately we can't do much about the firewall settings due to security restrictions.
    I would be glad to hear from you.
    Kind regards,
    Niklas

    Hi Mathias,
    I got an answer from SAP. There is no option that can be executed with STARTUP to solve this.
    I already proposed to forward this request to the dev team at SAP
    What I am currently doing is:
    Start the GUI and keep it open only if I know if there is are Actions coming next, otherwise I close it (only the GUI) and when some time has passed by I logon again to check.
    This is a really bad solution, but currently the only one.
    Regards,
    Niklas

  • Why do I have Intermittent Wifi Connection Loss during music streaming ?

    Hello,
    I have an ipad3 and an iPhone 4S and I am getting with both devices interruption of the sound when I send music to the Apple TV. It generally happens after a few minutes. The signal for the wifi is still good and I have still access to the Internet  I have tried all the recommendations of the article "iOS: Troubleshooting Wi-Fi networks and connections" but this did not help. I have used several applications for sending music to the Apple TV (music application from Apple and DSAudio from Synology) but I'm getting the same issue. I have also the same issue with the media center application from Bouygues Telecom connecting directly to my internet router. My router is a bbox sensation. I had also the same kind of issue with my old router when sensing photo albums to the internet: I had the error message "your system is running low on ressources". How can I solve these intermittent wifi connection losses ?

    Try #5.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • DB adapter and connections problem (Software caused connection abort)

    Hi all!
    I've heard about some problems of BPEL with database pooling and restoring the connection to the database. I think I might ran into a problem linked with this issue.
    I have a process with a DB adapter that executes custom SQL (SELECT I.SEQ.NEXTVAL FROM DUAL). Yesterday everything worked fine. Over the night the database has been restarted. Today, when I try to execute the process I receive this error:
    <fault>
    -<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
    -<part name="code">
    <code>17002
    </code>
    </part>
    -<part name="summary">
    <summary>
    file:/C:/Oracle/OracleAS/bpel/domains/default/tmp/.bpel_process_1.0_e83588e1ecab6f4899d99f7f74afd076.tmp/MyNextVal.wsdl [ MyNextVal_ptt::MyNextVal(MyNextValInput_msg,MyNextValOutputCollection) ] - WSIF JCA Execute of operation 'MyNextVal' failed due to: Pure SQL Exception.
    Pure SQL Execute of SELECT I.SEQ.NEXTVAL FROM DUAL failed. Caused by java.sql.SQLException: Io exception: Software caused connection abort: recv failed.
    ; nested exception is:
         ORABPEL-11633
    Pure SQL Exception.
    Pure SQL Execute of SELECT I.SEQ.NEXTVAL FROM DUAL failed. Caused by java.sql.SQLException: Io exception: Software caused connection abort: recv failed.
    The Pure SQL option is for border use cases only and provides simple yet minimal functionality. Possibly try the "Perform an operation on a table" option instead.
    </summary>
    </part>
    -<part name="detail">
    <detail>Io exception: Software caused connection abort: recv failed
    </detail>
    </part>
    </remoteFault>
    </fault
    I don't believe the problem is in using custom SQL but in establishing new DB connection (I'm not a DB expert so I don't know exactly the problem).
    Can anyone please explain something about this and what should I do to ensure this error doesn't repeat?
    After restarting opmn the process is executed successfully.
    Regards!

    Are you using locally defined datasources (setting in wsdl of the dbadapter) or have you set them up at the application server (managed) ?

  • "Software caused connection abort: recv failed" from Applet in IE to JBoss

    Hi
    We have an application hosted as applets on our web-site, but offer the
    same application to customers as a "standalone" off-line version. This
    off-line version is the same code-base, deploy and HTML but run from the
    local file system (in the absence of a web-server).
    I have a J2EE Jasper Reporting framework running in JBoss. On the off-line
    product JBoss runs on the same machine.
    The on-line version works perfectly in both IE and FireFox.
    The off-line version works perfectly in FireFox, but alas, NOT in IE!
    First, here's some code:
    private JasperPrint generateReport() {
              Hashtable enva = new Hashtable();
              System.out.println("enva.put(\"java.naming.factory.initial\", \"org.jnp.interfaces.NamingContextFactory\");");
              enva.put("java.naming.factory.initial", "org.jnp.interfaces.NamingContextFactory");
              System.out.println("enva.put(\"java.naming.factory.url.pkgs\", \"org.jboss.naming:org.jnp.interfaces\");");
              enva.put("java.naming.factory.url.pkgs", "org.jboss.naming:org.jnp.interfaces");
              int port = 1099;
              String host = "127.0.0.1";
              System.out.println("enva.put(\"java.naming.provider.url\", \"jnp:// " + host + ":" + port);
              enva.put("java.naming.provider.url", "jnp:// " + host + ":" + port);
              try {
                   System.out.println("Context ictx = new InitialContext(enva);");
                   Context ictx = new InitialContext(enva);
                   System.out.println("Object o = ictx.lookup(\"java:/SessionReport\");");
                   Object o = ictx.lookup("java:/SessionReport");
                   System.out.println("SessionReportControllerHome home = (SessionReportControllerHome) PortableRemoteObject.narrow(o, SessionReportControllerHome.class);");
                   SessionReportControllerHome home = (SessionReportControllerHome) PortableRemoteObject.narrow(o, SessionReportControllerHome.class);
                   System.out.println("SessionReportController remote = home.create();");
                   SessionReportController remote = home.create();
                   PSIberRDSParameterSEIFSAPensionProvidendFund rVO = new PSIberRDSParameterSEIFSAPensionProvidendFund();
                   //call the function on remote
                   try {
                        JasperPrint jasperPrint = new JasperPrint();
                        JasperVO jasperVO = remote.generateMyJasperReport(rVO);
                        jasperPrint = jasperVO.getJasperPrint();
                        return jasperPrint;
                   } catch (Exception re) {
                        System.err.println("remote exception is " + re.getMessage());
              } catch (Exception e) {
                   e.printStackTrace();
              return null;
         }This function returns a net.sf.jasperreports.engine.JasperPrint object wich I
    feed to the JasperViewer.
    Here's the output in my Java console:
    enva.put("java.naming.factory.initial", "org.jnp.interfaces.NamingContextFactory");
    enva.put("java.naming.factory.url.pkgs", "org.jboss.naming:org.jnp.interfaces");
    enva.put("java.naming.provider.url", "jnp:// 127.0.0.1:1099
    Context ictx = new InitialContext(enva);
    Object o = ictx.lookup("java:/SessionReport");
    javax.naming.CommunicationException [Root exception is java.rmi.UnmarshalException: Error unmarshaling return header; nested exception is:
         java.net.SocketException: Software caused connection abort: recv failed]
         at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:707)
         at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:572)
         at javax.naming.InitialContext.lookup(Unknown Source)
         at psiber.v2.pp.psiberworks.server.MessageRouter_PAY.callSEIFSAPensionProvidentFundReport(MessageRouter_PAY.java:15159)
         at psiber.v2.pp.psiberworks.server.MessageRouter_PAY.getPayAppletDataImpl(MessageRouter_PAY.java:14895)
         at psiber.v2.pp.psiberworks.server.MessageRouter_PAY.getAppletDataImpl(MessageRouter_PAY.java:14228)
         at psiber.v2.pp.psiberworks.server.MessageRouter.getAppletData(MessageRouter.java:135)
         at psiber.v2.pp.psiberworks.server.RemoteSessionImpl.getAppletDataImpl(RemoteSessionImpl.java:734)
         at psiber.v2.pp.psiberworks.server.RemoteSessionImpl.access$0(RemoteSessionImpl.java:710)
         at psiber.v2.pp.psiberworks.server.RemoteSessionImpl$1.exec(RemoteSessionImpl.java:668)
         at psiber.v2.pp.psiberworks.server.SynchronizedAccessController.doExecuteQuery(SynchronizedAccessController.java:61)
         at psiber.v2.pp.psiberworks.server.SynchronizedAccessController.executeQuery(SynchronizedAccessController.java:137)
         at psiber.v2.pp.psiberworks.server.RemoteSessionImpl.getAppletData(RemoteSessionImpl.java:690)
         at psiber.v2.pp.psiberworks.client.RemoteSessionProxy.getAppletData(RemoteSessionProxy.java:109)
         at psiber.v2.pp.psiberworks.client.hr.psiberpay.PsiberPayReportWizardApplet.getAppletData(PsiberPayReportWizardApplet.java:7094)
         at psiber.v2.pp.psiberworks.client.hr.psiberpay.PsiberPayReportWizardApplet.callSEIFSAPensionProvidentFundReport(PsiberPayReportWizardApplet.java:14492)
         at psiber.v2.pp.psiberworks.client.hr.psiberpay.PsiberPayReportWizardApplet.processSelectedReport(PsiberPayReportWizardApplet.java:14091)
         at psiber.v2.pp.psiberworks.client.hr.psiberpay.PsiberPayReportWizardApplet.onNextButtonPressed(PsiberPayReportWizardApplet.java:13229)
         at psiber.v2.pp.psiberworks.client.hr.psiberpay.PsiberPayReportWizardApplet.actionPerformed(PsiberPayReportWizardApplet.java:361)
         at java.awt.Button.processActionEvent(Unknown Source)
         at java.awt.Button.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    Caused by: java.rmi.UnmarshalException: Error unmarshaling return header; nested exception is:
         java.net.SocketException: Software caused connection abort: recv failed
         at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
         at sun.rmi.server.UnicastRef.invoke(Unknown Source)
         at org.jnp.server.NamingServer_Stub.lookup(Unknown Source)
         at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:610)
         ... 28 more
    Caused by: java.net.SocketException: Software caused connection abort: recv failed
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(Unknown Source)
         at java.io.BufferedInputStream.fill(Unknown Source)
         at java.io.BufferedInputStream.read(Unknown Source)
         at java.io.DataInputStream.readByte(Unknown Source)
         ... 32 more
    remote exception is null
    You'll see just as the InitialContext.lookup is executed a
    javax.naming.CommunicationException is thrown.
    I have re-tried changing hostnames, ip addresses etc.
    Port 1099 is allowed on Personal Firewall and I even diabled it to be sure.
    Like I said, it works fine in FireFox.
    I'm running Windows XP Version 5.1 (Build 2600.xpsp_sp2_gdr.050501-1519 : Service Pack 2)
    and IE Version 6.0.2900.2180.xpsp_sp2_gdr.050501-1519
    and SUN JAVA Version 1.4.2_06 (build 1.4.2_06-b03)
    I have tested this on 1.5.0 (build 15.0_02-b09) with the same result.
    Please help! F1! F1! F1!
    Thanks in advance :D

    Hello again
    I have discovered more info. I'm not realy enthusiastic about these latests
    findings and I realy hope someone can help me figure a work around.
    Intermittently I get this stack trace in the java console:
    enva.put("java.naming.factory.initial", "org.jnp.interfaces.NamingContextFactory");
    enva.put("java.naming.factory.url.pkgs", "org.jboss.naming:org.jnp.interfaces");
    enva.put("java.naming.provider.url", "jnp://localhost:1099
    Context ictx = new InitialContext(enva);
    Object o = ictx.lookup("java:/SessionReport");
    javax.naming.CommunicationException [Root exception is java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
         java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
         java.net.MalformedURLException: no protocol: Files/psiberworks/lib/pcl.jar]
         at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:707)
         at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:572)
         at javax.naming.InitialContext.lookup(Unknown Source)
         at psiber.v2.pp.psiberworks.server.MessageRouter_PAY.callSEIFSAPensionProvidentFundReport(MessageRouter_PAY.java:15160)
         at psiber.v2.pp.psiberworks.server.MessageRouter_PAY.getPayAppletDataImpl(MessageRouter_PAY.java:14895)
         at psiber.v2.pp.psiberworks.server.MessageRouter_PAY.getAppletDataImpl(MessageRouter_PAY.java:14228)
         at psiber.v2.pp.psiberworks.server.MessageRouter.getAppletData(MessageRouter.java:135)
         at psiber.v2.pp.psiberworks.server.RemoteSessionImpl.getAppletDataImpl(RemoteSessionImpl.java:734)
         at psiber.v2.pp.psiberworks.server.RemoteSessionImpl.access$0(RemoteSessionImpl.java:710)
         at psiber.v2.pp.psiberworks.server.RemoteSessionImpl$1.exec(RemoteSessionImpl.java:668)
         at psiber.v2.pp.psiberworks.server.SynchronizedAccessController.doExecuteQuery(SynchronizedAccessController.java:61)
         at psiber.v2.pp.psiberworks.server.SynchronizedAccessController.executeQuery(SynchronizedAccessController.java:137)
         at psiber.v2.pp.psiberworks.server.RemoteSessionImpl.getAppletData(RemoteSessionImpl.java:690)
         at psiber.v2.pp.psiberworks.client.RemoteSessionProxy.getAppletData(RemoteSessionProxy.java:109)
         at psiber.v2.pp.psiberworks.client.hr.psiberpay.PsiberPayReportWizardApplet.getAppletData(PsiberPayReportWizardApplet.java:7094)
         at psiber.v2.pp.psiberworks.client.hr.psiberpay.PsiberPayReportWizardApplet.callSEIFSAPensionProvidentFundReport(PsiberPayReportWizardApplet.java:14492)
         at psiber.v2.pp.psiberworks.client.hr.psiberpay.PsiberPayReportWizardApplet.processSelectedReport(PsiberPayReportWizardApplet.java:14091)
         at psiber.v2.pp.psiberworks.client.hr.psiberpay.PsiberPayReportWizardApplet.onNextButtonPressed(PsiberPayReportWizardApplet.java:13229)
         at psiber.v2.pp.psiberworks.client.hr.psiberpay.PsiberPayReportWizardApplet.actionPerformed(PsiberPayReportWizardApplet.java:361)
         at java.awt.Button.processActionEvent(Unknown Source)
         at java.awt.Button.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    Caused by: java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
         java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
         java.net.MalformedURLException: no protocol: Files/psiberworks/lib/pcl.jar
         at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:292)
         at sun.rmi.transport.Transport$1.run(Transport.java:148)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.rmi.transport.Transport.serviceCall(Transport.java:144)
         at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:460)
         at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:701)
         at java.lang.Thread.run(Thread.java:534)
         at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(Unknown Source)
         at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
         at sun.rmi.server.UnicastRef.invoke(Unknown Source)
         at org.jnp.server.NamingServer_Stub.lookup(Unknown Source)
         at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:610)
         ... 28 more
    Caused by: java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
         java.net.MalformedURLException: no protocol: Files/psiberworks/lib/pcl.jar
         at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:249)
         at sun.rmi.transport.Transport$1.run(Transport.java:148)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.rmi.transport.Transport.serviceCall(Transport.java:144)
         at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:460)
         at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:701)
         at java.lang.Thread.run(Thread.java:534)
    Caused by: java.net.MalformedURLException: no protocol: Files/psiberworks/lib/pcl.jar
         at java.net.URL.<init>(URL.java:537)
         at java.net.URL.<init>(URL.java:434)
         at java.net.URL.<init>(URL.java:383)
         at sun.rmi.server.LoaderHandler.pathToURLs(LoaderHandler.java:747)
         at sun.rmi.server.LoaderHandler.loadClass(LoaderHandler.java:147)
         at java.rmi.server.RMIClassLoader$2.loadClass(RMIClassLoader.java:631)
         at org.jboss.system.JBossRMIClassLoader.loadClass(JBossRMIClassLoader.java:79)
         at java.rmi.server.RMIClassLoader.loadClass(RMIClassLoader.java:257)
         at sun.rmi.server.MarshalInputStream.resolveClass(MarshalInputStream.java:200)
         at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1513)
         at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1435)
         at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1626)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1274)
         at java.io.ObjectInputStream.readObject(ObjectInputStream.java:324)
         at javax.naming.CompoundName.readObject(CompoundName.java:554)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:838)
         at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1746)
         at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1646)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1274)
         at java.io.ObjectInputStream.readObject(ObjectInputStream.java:324)
         at sun.rmi.server.UnicastRef.unmarshalValue(UnicastRef.java:297)
         at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:246)
         ... 6 more
    remote exception is null
    So why would I get a java.net.MalformedURLException?!?! And why is the
    classloader having problems loading on of the referenced jars?!
    It's that space in "Program Files"......
    So I copied the folder to D:\Temp and.... volla!! the off-line deploy of the
    application now works fine in Internet Explorer. It's that space!
    So this is my theory, when the initialcontext.lookup is called the classnames specified are reflected, instanciated etc. So when the applet gets the
    document base from the browser IE gives it "C:\Program Files\" and not an
    encoded "file://C:\Program%20Files\" and the spaces causes the classloader
    (or something) to not parse the path correctly and causes a bad URL.
    If I type the encoded URL in IE's address bar it finds the HTML, displayes it and changes the address bar contents back to "C:\Program Files".
    FireFox doen't do this, and therefore works.
    Does anyone know if their is a patch for IE, or if there is another way to
    connect to JBoss?
    How frustrating!! IE Stuffs up the encoded URLS!!!

  • Software caused connection abort?

    I am receiving the following errors:
    Nov 20 08:13:07 nexus sendmail[29376]: [ID 801593 mail.crit] NOQUEUE: SYSERR(root): getrequests: accept: Software caused connection abort
    I have not been able to find anything regarding the cause or resolution of this issue - does anyone have a pointer for me?
    Mike

    Hopefully you've long since addressed this, but for those who are still looking...
    Anything that externally interrupts your network access can cause Windows to return "software caused connection abort". It's the "General Protection Fault" of network errors (that dates me, doesn't it?)
    Look for firewalls intermittently swiping packets, flaky NICs, bad cables, and in my case, a DHCP server that was occasionally, briefly denying the assigned IP address, just long enough to kill existing connections.
    The only way I found that problem was checking the Event Log and finding DHCPNACK errors. I reserved a specific IP for my computer, configured Windows with a static LAN IP address (usually 192.168.x.x or 10.0.0.x), and set the DHCP Client service to manual start / off. Error free connections now.

  • Some information about 'software caused connection abort'

    WSAECONNABORTED (10053) Software caused connection abort
    A connection abort was caused internal to your host machine. The software caused a connection abort because there is no space on the socket's queue and the socket cannot receive further connections.
    WinSock description: The error can occur when the local network system aborts a connection. This would occur if WinSock aborts an established connection after data retransmission fails (receiver never acknowledges data sent on a datastream socket).
    TCP/IP scenario: A connection will timeout if the local system doesn't receive an (ACK)nowledgement for data sent. It would also timeout if a (FIN)ish TCP packet is not ACK'd (and even if the FIN is ACK'd, it will eventually timeout if a FIN is not returned).
    It seems to happen more with WindowsXP and it seems also to be possibly related to Windows firewall settings. In any case the salient point is that the abort has originated inside the local machine.
    It's a stupidly worded message.

    I know this probably isn't a good solution and may not bhelp you but I had a similar problem with an applet communicating with a server. My destroy function quitted the connection to the server.
    I had to send 2 commands to the server then disconnect. I regularly saw a problem at the server end. It troubled me so I wanted to resolve. I ended up putting a 500 millisecond sleep between the two commands and the socket shutdown and that did the trick.
    I waited for a response from the server after each command sent so not sure why I had to put the sleeps in - but it cured problem anyway. But it always bugs me if I don't know why. Something to come back to when I am less busy.

  • Connectivity loss between PLC and Kepware

    Hi Experts,
    I m working on SAP PCo and PLC connectivity using Kepware.
    I m trying to find out ways to find connectivity loss between
    1) PLC and kepware
    2) kepware and PCo
    For 2nd approch,if connectivity loss is there then PCo instance will go in error state and using remote monitoring we can get alert.
    But m not able to find any way for 1st approch.
    If PLC connection lost then only tag quality in kepware is bad.
    Is there any way in PCo expression editor to check tag quality so that i can trigger MII transaction?
    Thanks in advance.
    Regards,
    Neha

    To add to Hubrisnsx's comment ... are you provisioned Ethernet or MoCA for the WAN connection?
    Edit: Never mind, I see in the first post you said MoCA.   So, if the MoCA channel is staying up, then it sounds like it might be something inside the ONT. 
    Keep in mind that while some Verizon folks do drop by these forums from time to time, that this is primarily are user to user forum where customers can help one another.

  • [b]java.sql.SQLException: Io exception: Software caused connection abort: r

    hi ,
    In my application iam getting DBconnection obj from context attribute which iam using in all my sevlets & jsp's.
    The application is running fine but sometimes iam getting following exception
    java.sql.SQLException: Io exception: Software caused connection abort: recv failed
    at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:210)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:323)
    at oracle.jdbc.driver.OracleStatement.<init>(OracleStatement.java:417)
    at oracle.jdbc.driver.OracleConnection.privateCreateStatement(OracleConn
    ection.java:474)
    at oracle.jdbc.driver.OracleConnection.createStatement(OracleConnection.
    java:383)
    at org.apache.jsp.Vis_002dReg.GetCompNames_jsp._jspService(GetCompNames_
    jsp.java:64)
    at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:133)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper
    .java:311)
    at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:3
    01)
    at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:248)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDisp
    atcher.java:684)
    at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationD
    ispatcher.java:575)
    at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDis
    patcher.java:498)
    at org.apache.jasper.runtime.JspRuntimeLibrary.include(JspRuntimeLibrary
    .java:1002)
    at org.apache.jsp.Vis_002dReg.VisRegCustmer3_jsp._jspService(VisRegCustm
    er3_jsp.java:320)
    at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:133)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper
    .java:311)
    at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:3
    01)
    at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:248)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
    icationFilterChain.java:247)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
    ilterChain.java:193)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
    alve.java:256)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
    t.invokeNext(StandardPipeline.java:643)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
    a:480)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
    alve.java:191)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
    t.invokeNext(StandardPipeline.java:643)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
    a:480)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
    at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:
    2415)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
    ava:180)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
    t.invokeNext(StandardPipeline.java:643)
    at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatche
    rValve.java:171)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
    t.invokeNext(StandardPipeline.java:641)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
    ava:172)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
    t.invokeNext(StandardPipeline.java:641)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
    a:480)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
    ve.java:174)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
    t.invokeNext(StandardPipeline.java:643)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
    a:480)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
    at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:22
    3)
    at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java
    :594)
    at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.proce
    ssConnection(Http11Protocol.java:392)
    at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java
    :565)
    at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP
    ool.java:619)
    at java.lang.Thread.run(Thread.java:534)
    222222 In GET COMPANY NAMES EXCEPTION
    java.lang.NullPointerException
    at org.apache.jsp.Vis_002dReg.GetCompNames_jsp._jspService(GetCompNames_
    jsp.java:101)
    at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:133)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper
    .java:311)
    at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:3
    01)
    at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:248)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDisp
    atcher.java:684)
    at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationD
    ispatcher.java:575)
    at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDis
    patcher.java:498)
    at org.apache.jasper.runtime.JspRuntimeLibrary.include(JspRuntimeLibrary
    .java:1002)
    at org.apache.jsp.Vis_002dReg.VisRegCustmer3_jsp._jspService(VisRegCustm
    er3_jsp.java:320)
    at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:133)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper
    .java:311)
    at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:3
    01)
    at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:248)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
    icationFilterChain.java:247)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
    ilterChain.java:193)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
    alve.java:256)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
    t.invokeNext(StandardPipeline.java:643)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
    a:480)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
    alve.java:191)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
    t.invokeNext(StandardPipeline.java:643)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
    a:480)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
    at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:
    2415)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
    ava:180)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
    t.invokeNext(StandardPipeline.java:643)
    at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatche
    rValve.java:171)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
    t.invokeNext(StandardPipeline.java:641)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
    ava:172)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
    t.invokeNext(StandardPipeline.java:641)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
    a:480)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
    ve.java:174)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
    t.invokeNext(StandardPipeline.java:643)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
    a:480)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
    at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:22
    3)
    at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java
    :594)
    at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.proce
    ssConnection(Http11Protocol.java:392)
    at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java
    :565)
    at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP
    ool.java:619)
    at java.lang.Thread.run(Thread.java:534)
    can any body help me with this wat went wrong, need urgent

    Something bad happened.
    Why is this such a calamity?
    Anyway something (probably the server) closed the connection probably. Maybe a time out. Or you asked for something so dispicable the database got upset and booted you out.

  • Calendar Crashes on connection loss.

    Does anyone know why oracle calendar crashes when the connection to the calendar server is lost. This happens for both Mac and Windows. I am using calendar version 9.0.4.2

    after much work I have discovered that this is due to power settings on the mac. if you don't turn off the hardrive it seems to work better. This however doesn't explain the corruption issues due to connection loss.

  • Trying to detect connection loss

    I have built a little telnet program which is specialized for a specific telnet supporting server... Everything works just fine except for detecting connection loss...
    I am connected to the server using java.net.Socket, data is sent using java.io.PrintStream and data is received using java.io.InputStream...
    I have tried having a thread running and looking if the Socket was still connected, but even after closing the server, the Socket keeps returning true when I call Socket.isConnected()... How could I detect the moment when a connection is broken, would it be because the user has a modem connection and gets disconnected or because the server shuts down or any other such reason?

    You can detect a dead socket when a write to it fails.
    So, you could periodically send "keep alive" messages
    to know approximately when it drops.Okay, I had noticed that the PrintStream would set it's error state to true when I try to send a message and the socket is dead, but I hoped I didn't have to wait until that moment... Thanks though! You confirmed me I'll have to do it that way :P

Maybe you are looking for