Screenshot no longer working

Somehow the sound for the screenshot (command-shift-3) quit working, and then a few hours later, the entire function quit working.
Could I have hit the wrong combination of keys and accidentally turned this off?  My volume is working for everything else.  Please help!

Repair permissions and restart your computer. 
Solution may be found if you search in the "More Like This" section over in the right column. 

Similar Messages

  • Shift cmd screenshot no longer working

    My shift cmd 4 and shift cmd 3 no longer work, i've tried.
    Rebooting
    Repairing disk permisions
    Tested keyboard
    Checked keyboard shortcut
    Any suggestions?

    Excellent and sorry for being more detailed.

  • Screenshots no longer working (only grey) in 10.6

    I had a look at some other posts about this but did not find anybody with this problem.
    I recently upgraded to 10.6 and since than screenshots are a bit of a pain. The old keyboard commands still work but if I try to open the screenshot it is grey. If I open it with the ‘Quick Look’ function it is all there and when I paste it to somewhere it is there, but if I open it with Preview it is grey. Any tips tricks or ideas?

    I would suggest turning off one of the interfaces to test.  Always leave DNS on!   
    We ran into this when we were running Xsan.  Our way around this was to stop Xsan, deactivate the metadata LAN, launch AST to allow it to bind to primary LAN.  Then once it acquired the connection, enable your secondary LAN.
    R-
    Apple Consultants Network
    Apple Professional Services
    Author:  "Mavericks Server – Foundation Services" :: Exclusively available in the Apple iBooks Store

  • HT1338 screenshot no longer works

    When I take a screenshot in Evernote nothing happens, if I take a screenshot in grab just get a white screenshot.
    If I then restart the computer I can again make screenshots for a while, then it stops again. Though this is not always the case sometimes restarting all is the same

    try these:
    PRAM
    http://support.apple.com/kb/HT1379
    SMC
    http://support.apple.com/kb/HT3964

  • Win-key / PrtScr No Longer Working

    I use the Win-key PrtScr-key.  It would take a snap shot of my desktop and automatically save it into a folder called //C:USERS\DOUGLAS\PICTURES\SCREENSHOTS.  This folder is located in C\Pictures.  I used this combination forever, but it just
    stopped working.  Even just hitting PrtScr alone no longer works.  BUT hitting the Win-key and PrtScr-key will copy it to the clipboard, but understand the I want to make a *.png file in my Screenshots Folder.
    Just to make sure I'm clear:  Whenever I hit Win-key PrtScr-key it would make a snap shot of my desktop and automatically save it in a folder called //Screenshots.  This feature no longer works and I use
    it daily.  Can anyone please help?
    Please let me know if you require additional info.
    Thank you

    Just to make sure I'm clear:  Whenever I hit Ctrl Alt PrtScr it would make a copy of my desktop image and automatically save it in a folder called //Screenshots.
    That's backwards IME.  Win-PrtScn does what you want for me and is what I have always used in W8 to do that.  Alt-PrtScn captures the current window to ClipBoard and Ctrl-PrintScrn is the keyboard shortcut which the Snipping Tool uses for
    starting its capture.  I don't know what Ctrl+Alt+PrtScn would do, probably the same as Alt+PrtScn.   PrtScn by itself would capture the entire Display contents to Clipboard, same as ever. 
    Make sure that you don't have a Shift- key stuck.  Use the OSK to check.  Then you would be really pressing Ctrl+Alt+Shift+PrtScn and who knows what that would do?   <eg>
    Robert Aldwinckle

  • Itunes will no longer work on my Windows 8 PC. When I attempt to start the program a message says: A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available.

    Itunes will no longer work on my Windows 8 PC. When I attempt to start the program a message says: A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available.  I have tried to uninstall iTunes but the Windows uninstaller will not delete the program I get a message that says: A network error occurred while attempting to read file: C:\Windows|Installer|iTunes.msi.  How do I get iTunes to work again?

    Whentrying to uninstall iTunes (the first program that must be uninstalled per the instructions) I get a message:  A network error occurred while attempting to read file: C:\Windows|Installer|iTunes.msi. I can't even uninstall iTunes?
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
    http://majorgeeks.com/download.php?det=4459
    Here's a screenshot showing the particular links on the page that you should be clicking:
    After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
    Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
    When the dialog appears, choose to save the file.
    (2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • TripAdvisor no longer works in Maps Suite Guides (...

    Hello,
    I've noticed on my up to date Nokia 808 Pureview that for a couple of weeks now, the TripAdvisor guide, in the Maps Suite Guides, no longer works.
    While other guides like Michelin work correctly, TripAdvisor leads to an error (see attached screenshot).
    I'm in France but it seems to be the same in Germany, on any Symbian device (I have tested with a Nokia 5800 and Nokia N8, both up to date).
    I believe it's a problem on Nokia's server end ; could you fix it please ?
    Thank you
    Attachments:
    756910192.jpg ‏29 KB

    here the official answer:
    FAQ - Why is the TripAdvisor service in the Maps application on Symbian no longer available?
    Tweet
    Share in Facebook
    Due to a ceasing contract that Nokia has with TripAdvisor, the TripAdvisor service for the Maps applications on Symbian platform (concerning Maps 3.03 - Maps 3.09) had to be removed from the service list as of mid June 2013. We apologize for the inconvenience towards our TripAdvisor users.

  • Control key no longer works after update.

    After updating Lion the control key no longer works. It beeps when pressing control and then a number key but nothing happens.
    This is left control key though. Right still works?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
    Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search.
    Step 1
    Copy or drag -- do not type -- the line below into the Terminal window, then press return:
    kextstat -kl | awk ' !/apple/ { print $6 $7 } '
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Step 3
    launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
    Step 4
    ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
    Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
    You can then quit Terminal.

  • Screencapture is no longer working in 10.9.2

    I have updated to 10.9.2 and looks like it has broken my image uploading script.  It starts with a shell command: > screencapture -i /tmp/last_screen.png It should take a picture of selected area. It works well when I type it in console, or when I press "run" in Automator to test my service. But it doesn't work when I try to run it as service or via hotkey - my cursor doesn't change to area select tool.  Also, automator action "take screenshot" is no longer working too.

    Open the Service workflow in Automator. At the top where it says
    'Service receives:
    what are your settings? Try the following, if you havent' already:
    Service receives: no input in any application

  • After update to 6 shortcuts no longer work in message

    hello everyone,
    I have a peculiar message problem which I noticed right after updating to iOS 6.  The shortcuts I used in message no longer work. I checked in settings and they are all still there but they are not active. I have so far tried deleting and re-creating one of the shortcuts, closing and re-launching the message app, and turning my phone off and re-starting it. All to no avail. Has anyone else encountered this problem, and does anyone know of a fix?
    Thanks for reading, and for your support...
    Tim

    This is what I did step by step and it worked like a charm... I had an iPhone 4 when I did this a few days ago. I have documents and data ON in iCloud...
    1. write down or take screenshots of all existing shortcuts
    2. delete all shortcuts
    3. backup to iCloud (I think this clears all shortcuts you have stored in iCloud)
    4. go back to settings-->general-->keyboard... You may notice one or a few generic shortcuts pop up on their own. The one that popped up for me was OMW (on my way)
    5. re enter all of your shortcuts and phrases
    6. when done, back up again to iCloud (stores your new shortcuts)
    I restarted my phone. Shortcuts still worked. I just got a 4S and restored from the iCloud backup mentioned in step 6 and my shortcuts worked on my new phone.
    Good Luck. I hope this helps everyone.

  • Port forwarding no longer working

    i recently moved in with my boyfriend and he has fios and before i moved in we played minecraft on a server he hosted and after like a weekof hosting it, his portforwarding no longer worked. after going threw every thing we could find we gave up. and now im wanting to host a server again but i still cant get the port forwarding to work right. ive read every thread, watched every video of ppl with similiar problems but none of it fixes my problem.
    http://i41.tinypic.com/24wwvol.png
    here is a screenshot of the port forwarding page. i mean im pretty sure we are doing it right as it worked for about a week then stopped for some reason that we cant figure out. we have no firewalls on or anything.
    the port is 25565. If sumone would please help that would be amazing.
    Solved!
    Go to Solution.

    #1 In the router at the first page that you see after you log-in, one of the IP Address should be the same IP Address that is in the paragraph as 
    There is no standard governing the format of these machine names, so this is not something we can automatically determine for you.
    at https://www.grc.com/x/ne.dll?bh0bkyd2
    #2 If not, please report back that fact.
    #3 In the router go to Advanced -> Universal Plug and Play OR Advanced -> UPnP (Which ever exist in your router)
    #4 If you do not have at least two special computers that support Universal Plug and Play (UPnP) where you can not define the ports that they use, turn off UPnP in the router.
    A perfect example. At least two game consoles. Any two (Two Xboxes, two Playstations, One Xbox and one Playstation).
    #5 If you have at least two special computers that support UPnP where you can not define the ports that they use: Do only use one at a time OR are there times when at least two are on?
    #6 In the router go to Advanced -> IP Address Distribution
    #7 What is the Starting and Ending IP Address?
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Why are my actions no longer working?

    I can't understand, trace, or figure out why (haven't made any significant changes lately to my system, app, etc.), but my PSD actions (specifically, ones from PSDCovers.com to do book mockups) are no longer working. When I run Step 2 of the action, it doesn't rotate and align the cover correctly. I've tried everything, and I can't figure out why, or how this happened?
    Any clues??

    Any clues??
    How should anyone else be able to figure out what’s going on based on what you have provided so far?
    Is an unneeded Selection active?
    Please provide a screenshot of the expanded Action in the Actions Panel and of the Document with Layers and Channels Panel visible.

  • Shortcuts no longer work?

    The shortcut feature does not work anymore.
    For example, "ily" used to turn into I love you. I also had personal shortcuts programmed that no longer work either. This has been since the last update to 6.0.1.
    Is anyone else having this problem?

    This is what I did step by step and it worked like a charm... I had an iPhone 4 when I did this a few days ago. I have documents and data ON in iCloud...
    1. write down or take screenshots of all existing shortcuts
    2. delete all shortcuts
    3. backup to iCloud (I think this clears all shortcuts you have stored in iCloud)
    4. go back to settings-->general-->keyboard... You may notice one or a few generic shortcuts pop up on their own. The one that popped up for me was OMW (on my way)
    5. re enter all of your shortcuts and phrases
    6. when done, back up again to iCloud (stores your new shortcuts)
    I restarted my phone. Shortcuts still worked. I just got a 4S and restored from the iCloud backup mentioned in step 6 and my shortcuts worked on my new phone.
    Good Luck. I hope this helps everyone.

  • "Enter" no longer works to activate a SEARCH on the toolbar as well as no auto-play on other featues

    Firefox presented new issues that are disconcerting.
    1. Yahoo Toolbar SEARCH no longer works with an ENTER.
    The Firefox SEARCH box still works but don't know if the issue is Yahoo or Firefox as it started with ver 16.
    I refuse to use the Firefox SEARCH box as it loves BING and I dislike BING.
    2. With ver 16, the entire page will no longer populate. Some videos that you have to manually start requires you to satisfy Firefox "start arrow" as it put ANOTHER little arrow on TOP of the sites Arrow to play. So you have to press the Firefox one then the site one.
    And, certain sites use BLOCKS for text and those blocks will not load without the little Arrow from Firefox being pressed. This really slows down internet use. It started with either ver 16 i think and not 16.01.

    Hi,
    The updated Yahoo toolbar seems to be okay: http://us.toolbar.yahoo.com/
    If problems persist, you can reset Firefox, install the toolbar first and check.
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Also, please create a screenshot of the video problem you're seeing by following the guide mentioned at [[How do I create a screenshot of my problem?]].
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.

  • PCS no longer working with contacts and 6086

    I have applied the latest release of PC Suite 6.84.10.3.
    Previously the installed level was 6.83.14.1
    The send/read/write message still doesn't work but hangs the Windows Explorer for a while (this hang didn't occur previously)
    But now, the contact facility no longer works. It is no longer possible to edit a contact, to store it locally or to send it to the phone even a message says everything is OK
    (translate it from french: The contact has been well recorded into the phone)
    Folder browsing still works correctly, either the phone folder or the memory card folder
    Need a fix or a way to install the previous version, at least for the contacts...
    This is a really negative feedback!
    Phil

    I guess what I learned is that sometimes the best solution is to do nothing and wait for the problem to solve itself! Funny, this has never worked for me before.
    WOT is now working for me but often for only the first few rows of images. That's cool that it is also working with bing images.
    Boudica, thanks for understanding. I am new contributor/ question-asker here on mozilla and may not understand how things are done. I was just frustrated, getting an email saying that my question was answered, logging in to find that it wasn't.
    Now we have the functionality that we wanted, right?

Maybe you are looking for