Screenshots stopped working properly after 10.5.7 update

Hi everybody,
after the 10.5.7 whenever I take a screenshot of my Mac using COMMANDSHIFT3 I get a mostly green picture instead of the correct screenshot.
Please have a look at the picture... any idea of what might be causing it?
The strange thing is that, most of the time, COMMANDSHIFT4 or COMMANDSHIFT+3SPACE work correctly.
Thanks!
Message was edited by: trive

The problem seems to have disappeared after running Applejack autopilot (repair disk, permissions, flush cache, check pref files, etc...).
Thanks anyway!

Similar Messages

Firefox stops working properly after a period of time

btw, I can't type in this box. I'm typing this in another program and pasting it in.
Using Firefox 5. I just installed Lion yesterday for Mac, but this problem occurred even before I did so. After a period of time, FF stops working properly. I notice it when I try to open a new tab. It won't switch to the new tab and the screen turns blue. If I type in a web address, it looks like it tries to go there, but it doesn't. When I look at any other already open tab, it has the blue screen. I have to restart to get my proper web pages back.

Whenever I click on "More System Details" there are several things I hope I won't see. Your Conduit Engine is one of them. It is malware by any reasonable definition and a cause of major problems with Firefox.
Google for information and advice as to how to get rid of it. Someone may come along with more specific advice..
If things aren't perfect after that you could do some straightforward troubleshooting(Safe Mode, Problematic Extensions, Hardware Acceleration etc) - in default theme -
https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes

Catalyst Control Center stopped working properly after widows update

When I let Windows Update install the newest catalyst control center driver I could not open catalyst control center so I tried to do a system restore but it failed because It said my anti virus was preventing this with the error code 0x80070005.I first tried to disable the anti virus shields and restore didnt work. Then I uninstalled the anti virus and went to safe mode but it gave my the same error. Now Catalyst Control Center opens but the only feature available is HydraVision. I still cannot change the picture and graphics settings because they are not there to select in CCC.

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that your Catalyst Control Center (CCC) program on your desktop computer has stopped working correctly after downloading Windows update drivers for it, and I would be happy to assist you in this matter! To correct this issue, I recommend returning your system back to a previous restore point to before the Windows updates were installed. This can be done by following this resource on Using Microsoft System Restore (Windows 7). Once the restore point has been enabled, you can update your CCC and graphics drivers by following this document on Using HP Support Assistant (Windows 7). Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards

Samba stopped working again after most recent security update

This is not the first time that Samba has stopped working for me after applying an update to Mac OS X.
I installed an update that 'Software Update' offered to me a day or two ago, and it has caused Samba to stop working again. I can't access the disks on my Powermac from any of my PCs (WinXP and Vista) again.
I tried turning the firewall off. I tried turning SMB file sharing off and turning it back on. I tried disabling and enabling each of the users for SMB access. Still doesn't work.
Under 'Sharing', I have 'File Sharing' enabled. Under its 'Options', I have 'Share files and folders using AFP' and 'Share files and folders using SMB' both enabled. I have my account enabled under 'Share files and folders using SMB'. I also tried disabling it and enabling it. Under Network setup, I have location 'Home' selected, because of previous problems with Samba not working if 'Automatic' was selected.
Ideas?
Thanks,
Chris Shaker

Hi, I think I need to update my profile because my computer definitely says it has 10.4.11
I managed to solve the stickies and TextEdit issues by removing Butler in the end.

My volume has stopped working completely after the iOS 8 update

My sound has completely stopped working after the ios 8 update yesterday.please help

I just now spoke with Apple support as I had a similar issue, where the volume on some apps and games did not work, and what I was told helped me out greatly.
what I was told to do is hold down the power and the home screen button at the same time for about three or four seconds until the device shuts down and you should see it restarting. If the device does not restart on its own hit the power button and it should restart and then you should have no problem at all everything should be as it should be.
I hope this helps you or someone else in a similar situation as it is helped me and hope this makes your day better.
My device is iPad air Retina.

External WD HD stopped working properly after routine software update

Hello
I have WD my studio external HD connected to my iMac 24" early 2009 with OS 10.6.8. This morning everything was working fine, but then I updated the software after I was prompted. I had not updated the software since last july.
After the update, I got a message saying that the external HD could not be repaired. Very strange, as it was working perfectly before the update. I tried to restart the computer, but i got the same message.
I tried the few usual things (unmounting, disconnetting, repairing with disk utility etc,) with no success. Everything behaves funny, in the sense that sometimes the HD does not mount, sometimes it mounts, but it has a different icon (I used it to back up with time machine), sometimes it is greyish in the list of HD in finder, and I can't change permissions on it (i have write and read permissions, but they're greyish and there's nothing i can do).
Any suggestions?
thanks

I tested it on another computer and it works perfectly.
On my regular computer, when I start it, i get this message "Mac OS can't repair the disk "My Book". You can still open or copy files on the disk, but you can't save changes to the files on the disk. Back up the disk and reformat if as soon as you can".
As I said earlier, the problem occurred after I updated the software (the software updates that Mac OS always suggests). I worked perfectly before the update, and I got the error message when the Imac restarted after the update.
Suggestions?

30" @ 2048x1280 not working properly after 10.6.4 update

I have a Macbook Pro connected to a 30" Dell 3007WFP display. After updating to 10.6.4, there is a mirror image of my screen on the right hand side of the display now. Anyone else having this problem with your 30" displays? If you aren't, try to use it in 2048x1280 and let me know.
This is only using 10.6.4 and 2048x1280 resolution.

I have the new MacBook Pro 2010, Dell 3007WFP. No mirroring problemsat that or higher res. I was chagrined, however, to find out that while my 2007 15" MacBook Pro had no problems driving the Dell 30", the 2010 17" requires the Dual Link cable for $100 extra. ;>(
But it works fine.
ak

EBay messaging not working properly after recent FF 30 update

After the latest security release today for Firefox 30, eBay's messaging page has a problem when entering replies. When you start entering text in the reply field, every keystroke causes a return keystroke as well which creates space between the text your typing and the bottom of the reply window. Every keystroke enlarges the text window by one line. So by the time you are finished with the reply, there is so much space between the reply and the bottom of the window that you have to scroll to get to the bottom. For long replies with a couple hundred keystrokes, the window becomes huge. This same problem happens with any computer that has updated to the most recent Firefox 30. The computers I tried this on worked fine with the previous version then as soon as it was updated, the problem starts. Any ideas?

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Click the menu button [[Image:New Fx Menu]] and click History button, and then Clear Recent History... .
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

3rd party usb2/firewirePCMCIA card not working properly after 10.4.6 update

Hi,
I updated my mac to 10.4.6, after which I can no longer use my generic usb2/firewire PC card to sync my iPod via usb 2.0. My iPod (60gb photo) will still mount, but any app that tries to access the iPod portion of the drive (e.g. iTunes or the iPod updater) freezes until I detach my iPod. For some reason it's only a problem with usb2.0 slots, because I can connect the iPod via the card's firewire port with no problem.
Was there any modification to generic usb 2.0 PC cards in the new OS update?
Any ideas?

I think that I have a similar problem, having recently bought a PCMCIA to USB2, thanks to Apple's strange decission to drop FireWire from iPods (although that is a thread of it's own) but it does not recognise the iPod at all, using X.4.7.
It is a NEWlink model, which appear to be the same as D-Link and some others using the ALi chipset, and using the 'latest' (Oct 2003) driver USB2EHCI v3.1.5
Curiously USB1.1 devices seem to be fine, and the iPod is powered and goes into Sync mode but fails to boot either on the Desktop or in iTunes.

"Shake to Shuffle" not working properly after 4.0.2 update on Touch 3G.

It will shuffle by shaking it ONLY if any of the music windows are open but when the music is in backround mode S2S does not work anymore.

Sounds like it's working to me. Is that not supposed to be the way it works? I remember that on 3.1.3 it wouldn't work when the iPod was locked. Would it shuffle if shook on the home screen or in another app pre-iOS4?

3gs camera doesnt work properly after 5.1.1 update

my iphone 3gs camera wont open up always stuck on shutter then freezes

Basic troubleshooting from the User's guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Aluminum Wireless Keyboard not working properly after Firmware update 1.1

Hi,
Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
Thanks in advance.
Franco.

I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
Steve

After installing Maverick on my macbook pro, imessage on my ipad and Iphone stopped working properly. Is there a fix/test.

After installing Maverick on my macbook pro, imessage on my ipad and Iphone stopped working properly.
What I get is a RED exclamation and "Not Delivered". It happens even if i resend it over and over.
I have made sure that the 3 devices all have the same settins in iMessage.
I have made sure to try doing it from the same network and from the cell provider network.
I have tried rebooting all three devices.
The only way to get it to work on my iphone and iPad is to dissable it in Mavericks on my MacBook Pro.
Is this a "feature" of the new OS?

Hi,
On the iOS devices remove the Apple ID.
Set the device in to Airplane Mode (this breaks with the server)
Start with the iPhone to add back the Apple ID - only after you see the iPhone Number is Verified.
The Restart the Mac Version
Accept the pops ups that state what the iPhone is using.
Do same on iPad.
8:31 pm Wednesday; April 2, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

HT3669 After update the printer HP Deskjet F300 Series stopped working properly

I would like to notify you that i use drivers for HP Deskjet F300 Series Version 1.0.1 and after this update the version upgraded in version 2.0.0 and the printer stopped working properly. I removed from library all folder of HP drivers and then i re-install old version from .dmg file from this official link of HP and now it works properly again.

Hi ds5710,
I understand you have a Deskjet F300 series printer that is currently telling you it's offline and won't print. I will certainly do my best to assist you in resolving this issue.
If you're using Windows, I would suggest you start by downloading and running the HP Print and Scan Doctor as it should be able to rectify whatever is causing your printer to show as offline.
If that doesn't resolve your issue, or you're using a Mac, please get back to me with which version of Windows or Mac that you're using and I will certainly see what else we can do!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

ITunes has stopped working properly.

iTunes has stopped working properly.

Ok.
3 days ago, for no apparent reason my itunes stopped working.
This only happens after it has "synced" with the itunes store and prepares to upload remaining songs.
NOTHING has changed since then other than downloading latest itunes (11.1...whatever) which i was recommended to do after it stopped working.
I am using windows 7
Latest itunes version (for windows)
I have thousand of songs in icloud, which were uploading fine until 3 days ago.
Windows message reads something like: Itunes has stopped working properly, windows will now close the programme blah blah balh.
Bit annoyed. Tried copying the dll file from QT that somebody mentioned earlier. Also tried "repairing" programme and re-downloading update.
Not working still!!!! HELP PLEASE!!!

Screenshots stopped working properly after 10.5.7 update

Similar Messages

Maybe you are looking for