Screwed bios update for K8N Neo2 board

Hello,
I had a perfectly working system for the last couple of months (see below).  Last night I updated my bios from version 1.41(mod bios) to 1.52.    I downloaded the 1.52 bios from here:  http://www.lejabeach.com/MSIK8N/k8nneo2.html
Unfortunately, when I try to boot the machine, I get a quick glimse silver Plantinum banner srceen before the machine shuts down.   I have pulled the plug from the rear of the case and then reinserted it about 20 seconds later and then rebooted the machine while holding down the 'Insert' key.  Same result....The machine momentarily shows the banner screen and then shuts down. 
Any suggestions will be apprecaited.
Thanks

this bios is a disaster many are reporting serious problems...do you have any other ram to try ....
Beta BIOS's should be used by those with BIOS saviors only unless lots have success with one.
Obviously not the case with this BIOS.
I have seen a work round that would be worth a try if you had any ram you could try.
1) Hello, I had exactly the same problem with my MSI K8N Neo 2 i flashed to the 1.52 beta bios and had the 3 second problelm, pulling my hair out i tried new PSU, blah blah, the thing that fixed it was removing my Crucial Ballistix PC4000 Ram and sticking some el cheapo PC3200 ram in the, system booted perfectly >?
2) My BIOS just expired whilst updating to 1.52, I will give your method a try to see if I can get it to boot and roll back the update.
YAAAAAY!! Removing my Corsair XLPT and using an old Twinmos 3200 stick has got my machine up and running again so a BIG cheers bud!
Seems the 1.52 likes cheap ram. Go figure
that is quote from here:
http://www.xtremesystems.org/forums/showthread.php?p=719628&highlight=bios+1.52#post719628  ...post 984

Similar Messages

  • Is it possible to order bios chip 1b for K8N Neo2 Platinum

    Hi there im wondering if its possible to order from msi or elsewere bios 1b for K8N Neo2 Platinum seeing as i have the bios tools here, if so whats the install procedure and setup please or any other releviant information?, i have 1.5 everything works fine but theres no way i want to flash
    Thanks Blackrat7768

    Quote from: BlackRat7768 on 09-February-06, 21:34:23
    My issues are:
    Improve compatilbility problem with some USB 2.0 devices
    BIOS reported incorrect CPU temperature.
    If you have the d-bracket installed, it may help to completely disconnect it. Sometimes it will cause inaccurate temp readings. You can always plug it back in if you need it for troubleshooting.
    I unhooked mine & my reported CPU temps dropped by 8C...

  • AMDx2 BIOS update for k8 neo 2 platinum

    Is there a bios update for the k8 neo 2 platinum board that allows the use of the new AMD x2 processors.
    Cant seem to find one on the MSI website.

    Since BIOS Version  7025 v1.9
    MSI K8N NEO2 PLATINIUM BIOS

  • No BIOS update of K8N Neo3?

    K8n neo3 has been sold for a long time,
    but I still can't find any bios update.
    I use 754 sempron 2800+ and can't adjust CPU VID.
    And every time I write an email to ask if there's a bios update, I got nothing but some links of FAQ.
    What should I do to tell MSI I really want a bios update for NEO3?

    Send an E-mail to the costomer support of MSI ,explaining your problem.If you're lucky they will give you help and even a costom(or beta ) Bios.

  • Looking for a bios update for the Acer aspire M1641 Motherboard

    Looking for a bios update for the Acer aspire M1641 Motherboard All I could find was one for the acer aspire M1640 Which has a different board number but is as close as i can get to it. Is this the right one? If not would anyone be able to point me in the right direction? Thanks.

    @IronFly: The old website is always useful!

  • Bios updates for 845 Ultra?

    Is anyone aware of any pending bios updates for this motherboard or has it been put out to pasture ?  I'd still like to see a fix for the warm restart problem when overclocking in addition to the 1.65 core voltage limitation.  Before anyone says that those won't be fixed - I can wish, can't I?  

    I have the 845 Ultra-ARU and I am running my 1.8A at 2.52 GHz with a voltage of 1.71 actual applied volts.  This system is rock stable with a fsb of 140.  I have done the VID-pin mod, however.  I too would also like to see a BIOS update for a couple of reasons.  
    1)  According to the temperatures being reported by PC Alert III, my BIOS, and MBM5, my CPU idles at 50 C and goes up to 67-68 C under a full Prime95 load.  The reason why I think this is faulty is because I have run my computer with the side panel off, and there is no difference in the CPU or system temperature.  Also, when running the Prime95 test, I've put my hand right on the heatsink and it is BARELY warm.  The heatsink is making solid contact with the CPU, so if the CPU was actually at 68 degrees C, the heatsink too would be incredibly warm.  My own hand tells me that it cannot be 152 degrees Fahrenheit.
    2)  THE MEMORY RATIOS ARE GARBAGE!!!!!  I've got a 2.52 GHz CPU that is suffering a bottleneck from the measly 2.0 GB/s that my RAM is able to feed it.  Every other motherboard I've ever seen gives you the options of a couple different memory ratios.  I would at least like the option to run my memory at a different speed than my fsb.  Perhaps a 3:4 ratio could be done?  Just something so that I can try and get a little more bandwidth out of my RAM.  I know that the board is only designed to support PC1600 and PC2100 DDR RAM, but how could it hurt to give the option to support PC2400 or PC2700, maybe even PC3200 DDR RAM?  Plenty of other 845 chipset based boards can do that.  (Not officially, but through a variety of memory ratios.)  I'm just tired of not being able to do anything with my memory.

  • Where can I find a BIOS update for Satellite A100-200 (PSAA8E)

    Hello,
    Where can I find a BIOS update for this model?
    The BIOS on the download page is November last year, is there anything newer or does anyone know of an update that is compatible?
    Thanks,
    Ian

    Yep, newest updates and drivers for your notebook you will find on the Toshiba download pages, as Jimi already mentioned.
    Just as a little hint from my side is, that if there is nothing wrong with your notebook, just leave it as it is.
    As there is the saying, never touch a running system.
    So keep that in mind. ;)

  • Where can I find a BIOS update for Satellite A200-14D (PSAEC)

    Hello,
    Where can I find a BIOS update for this model?
    My bios is 23/10/07 Windows Vista 32 Bit 1.80-WIN

    Hi
    Did you check the Toshiba European driver page?
    There you could find all drivers and BIOS for the Satellite A200-14D (PSAEC)
    But I checked the page and the BIOS 1.8 for Win Vista 32bit is still the newest one.
    Seems you are already up to date buddy ;)

  • Cannot download BIOS Update for Tecra M5

    I'm trying to download the latet BIOS update for the Tecra M5.
    When I click on the download link, I get redirected to another server.
    My login does not appear to work for this server - is there another location I can download the file from?
    Thanks.

    Hi,
    When I try to download the bios (Tecra M5, 3.60 Win) I get another link:
    http://support.toshiba-tro.de/tedd-files2/0/bios-20071206111654.zip

  • Bug in latest 2 bios updates for FM2-A55M-E33

    Hey guys,
    Today I tried to update my bios of my FM2-A55M-E33 to the latest version(7721vA4.zip). Once everything completed succesfully, the bios wouldn't boot anymore.
    I plugged out my 3TB hdd and it worked fine. I installed an earlier version of the bios(7721vA0.zip) and this did work with my 3TB hdd.
    So in short:
    The latest bios updates for FM2-A55M-E33 will freeze(black screen) at bios start when a 2TB+ hdd drive is plugged in.
    Namely:
    FM2-A55M-E33 (MS-7) V10.3 BIOS Release
    FM2-A55M-E33 (MS-7) V10.4 BIOS Release
    I hope you can fix this asap, especially since these are the latest updates.
    Regards,
    Henkie de Grote

    Quote from: flobelix on 24-February-13, 08:05:55
    better report to MSI: >>How to contact MSI.<<
    True, but I couldn't find an email address, couldnt see how to contact them through a form or something, and don't really want to call them if otherwise possible.
    Thx for the info anyways

  • Where can i find Bios Update for K450e

    Hi can anyone direct me where i can find the BIOS update for a K450e thanks.... a link would be great....

    There is no bios update for the k450e on there driver page
    The only time there will be is to fix a conflict between hardware
    are you having a problem with your k450e
    Thx dave
    yoga 2, lenovo b540
    3 custom gaming pc systems

  • Are there any bios updates for my R7950?

    the model is: R7950-2PMD3GD5/OC
    The serial number is: 602-V276-01SB1203114737
    Here is a link to my current bios version: http://puu.sh/27BUd
    and for good measure also a screenshot of what gpu-Z gives me:

    Hmm just posting my specs in the thread itself may have been a bit to much sticking to the hard facts but yea I would like to know if there is any bios update for my gpu, I have seen quite a few of these threads here before and I would like to see if I could also get a shiny new bios update for my card.

  • Need help finding a BIOS flash tool and BIOS updates for HP Compaq nc8230 running Windows 7

    I put together this laptop. It didnt come with a hardrive, and basically I installed everything from the ground up.
    It is an HP Compaq nc8230, IDE Hard drive, Windows 7 32 bit. The BIOS on it is the original one. I've searched far and wide, but to no avail, it seems there's zero support for this model anymore.
          Basically it was never intended to go beyond Vista, back in 2004 when this model was introduced.
       The reason I am searching for some kind of BIOS update, whether it is BIOS or SMBios is to get the ACPI driver to recognize the primary laptop battery. This is crucial: it only sees both as the travel battery. Other than that, all else is fine.

    Hi:
    Here is the latest BIOS update for your notebook.
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
    You cannot use the windows based flash because you installed windows 7, so I provided the link to the DOS based flash.
    You need to use a USB floppy drive for this update.
    Oh, and the card reader won't work unless you install this updated driver which is not on your PC's support and driver page.
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
    Also, here is the link to your PC's support and driver page...
    http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=321957&prodSeries...

  • Where is a BIOS update for P505-S8010? And does Toshiba have a driver utility?

    I have searched Toshiba downloads a lot and I can seem to find any bios update for my laptop
    any links to the bios would be very helpful
    Solved!
    Go to Solution.

    ACPI Flash BIOS version 2.90 for Satellite P500/P505 (PSPGSU/PSPGJU)
    Select the Download link at the top of the page.
    You'll find it in the drop down menu under BIOS.
    A lot of people posting here have had problems
    updating the BIOS. If you've never updated it
    before it might be a good idea to find out
    what's involved.

  • BIOS update for P6000

    Is there a BIOS updated for the Pavilion 6000 series ?
    And if so  how do I tell which model I have? (6071 through 6085 and does it matter...)
    This question was solved.
    View Solution.

    Hello ShawnyD,
    There is no BIOS update for the Pavilion P6000 series from what I can tell. You can always find driver updates that are available directly from HP by visiting this link.
    http://goo.gl/7HKZw
    With that being said, there doesn't appear to be much of a difference this time for which model you have as they all have the same drivers.
    Sometimes it may matter as there is always some subtle differences between the versions (there has to be a reason to make a new version doesn't there!).
    On your case you should have a label and that label should include information such as your model number. On some machines it's on the side others it's on the back or even some place it on the top.
    See this link for help in finding the label and then identifying the model number.
    http://goo.gl/UkxHs
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

Maybe you are looking for

  • Lightroom 3 issues with viewing

    Can someone please help me! My lightroom 3 does not seem to be working correctly, When trying to create a catalogue I cannot view the pictures! I can view them to try and upload but to try and edit them the picture is not viewable. all I get is a Gre

  • Tax Date Based Non Leading Ledger BS, TB and PnL

    Hi Gurus In our scenario, we will be using the Leading Ledger for Accrual Accounting, while the Non Leading Ledger will be used for Cash Accounting. It is required, for management effectiveness to capture transactions on accrual basis (leading ledger

  • Can't uninstall Itunes / QuickTime

    Hi there, I upgraded QickTime to v7 and used Mozilla Firefox to find the latest update. It pointed me to a combined QuickTime / Itunes and as I couldn't find a standalone Quicktime Product (have now found), I downloaded and installed. QT didn't run t

  • OSB: Configuring Proxy Service

    Hi, As I understand the "Proxy service" invokes the "Business service". Therefore when I configure the "ProxyService" there should be a "Create From Existing Service" section in the "General Configuration". But in my workbench I dont see the "Create

  • Pixel Aspect Ratios

    I'm working on a project to be displayed on an LCD display with irregular dimensions -- 1360 by 1040 I believe. Should the pixel aspect ratio be set to square or 16:9? For that matter, should you always use square pixels for widescreen HD displays an