Scribble tool crashes when zooming in

I have rather simple selection to do with PS Touch 1.5.1. I'm using scribble tool and for accuracy I zoom in heavily. After 3 to 4 attempts, I had to give up as some point of time the app crashes fully. Any proposals? Or should I wait for update?
w. Brs,
Rauno

Any general steps to repro? I'm trying to repro but cannot seem to do so. (I'm using PS Touch 1.5.1 on a Google Nexus 7 (2013) with Android 4.3.)
I try to zoom in all the way (400% is the max) and cannot get it to crash.

Similar Messages

IPad photo app crashes when zooming into pictures

I have about 15 GB of photos on this iPad- and the photo app crashes any time I try to pinch to zoom into a picture. anyone else having this problem? what's the deal? works sometimes but crashes 2 out of three times.

Did you get any fruitful answers from an Apple Genius? Sure wouldn't mind saving myself a trip. Thanks.
Nutshell:
I've had two iPads thus far where I cannot use the Photos app because anytime I scroll it crashes.
I had my first iPad replaced since it couldn't play any video without the entire machine locking up and requiring a forced restart. (see http://discussions.apple.com/thread.jspa?messageID=11320267&#11320267 ) The Photos app on my first iPad would also crash anytime I attempted to scroll through my photos.
Now, the Photos app on my second, replacement iPad is behaving the same way, it always crashes when I scroll.
Observations:
• I didn't put any of the same photos back on my replacement iPad, I started with an empty Photos app which ever since only contains images that I've saved to the Photos app from other apps on the iPad, e.g. screenshots, saving images from Safari, Mail, etc.
• I did test drive the Photos app after having saved only a handful of images ( ≈ 30 imgs) and was happy to see that it DID NOT crash. Unfortunately it wasn't long after, having had saved a handful or so more images to the photo library that the app again began to crash anytime I would begin scrolling down through images.

Crop Tool crashes when OPENGL is activated

Hi,
im on vista 32bit and my notebook video driver is intel 965 chipset ( i just updated my drivers)
probem is when i enable my OPENGL in order to use the rotate canvas feature, crop tool crashes whenever i activate it. most of the tools work ok(haven\t tried all yet)
but when i disable OpenGL, crop tool works fine.
I need the rotate canvas feature & thus OPENGl enabled.. what can I do about the crop tool(and most probably some other tools) crashing on me?
i already tried resetting & install/reisntall. .does not help!!
pls advice!]

You could try playing with the settings of OpenGL in the PS preferences dialog.
Or look at the video driver settings in Display Properties.
Otherwise, as I said, your computer may not be up to it.

BI Admin Tool crashes when importing from Essbase

Hi folks,
I'm trying to import an Essbase cube into my OBIEE RPD and it is causing the Admin Tool to crash with a generic Windows error msg that "BI Admin Tool has stopped working and Windows is looking for a solution"..
I'm using OBIEE 10.3.1.4 with all components, including BI Server installed on my local machine which is Windows 7 32-bit. The Essbase server is on a different machine. The RPD is working fine for several other data sources, and crashes only when I try to import from Essbase. The Essbase server is also working fine. The crash happens regardless of whether I'm in online or offline mode. I even tried to create a new RPD in case the other one was corrupted, but even the new one crashes.
I have Essbase client installed on the same machine as BI Server and my environment variables seem fine. All ports on the Essbase server machine are open and I can ping it from the BI Server machine, so it is not a network issue. I know this version of OBI is not officially supported on Windows 7, but it's working fine in all other respects. Has anyone had a similar problem in the past?
Appreciate any advise.
thanks,
Axe
Edited by: axe1 on Oct 19, 2010 5:54 AM

I wonder if cube import only works when using a 32-bit Essbase client?

Photos app crashes when zooming some photos

Some photos synced from my iMac's iPhoto '11 library are crashing the Photos app on my iPad. The iPad displays these photos are blurry thumbnails, then when I zoom into them, it puts the play button on the photo, like it's a video. If I tap the photo or interact with it to go to the next photo, it will crash the Photos app.
Message was edited by: Evan Wiener

yudashin wrote:
How do you delete the corrupt image files when they can't be opened to delete?
As they were sync'ed in fro iTunes, delete them there and they should then be removes at your next sync

Crash when zooming in

My Illustrator consistently crashes under the following conditions:
outline type
using arrow keys to zoom in
Started doing this a month ago, after this technique working for many years through many versions. Nothing I know of changed at that particular time, except maybe some font changes.
Conditions:
Illustrator CS6 (latest update)
Mac OS 10.9.4
iMac with a Fusion hard drive and 16GB RAM
crashes on pretty many any file, new or old
Troubleshooting we've tried:
-obtained latest Illustrator version (was a couple minor versions behind)
-trashed all Illustrator related preferences (per Adobe's tech article)
-updated FontAgent Pro to the latest (was using FAP5 now 6)
-turned off all fonts except those absolutely necessary
-started Mac in "safe mode" to clear things out
-repaired permissions
-ran Disk Repair (no problems found)
Any ideas what to try next?

Longshot here: do you have Soundflower installed by any chance?
-Jeff

Captivate course crashes when zooming in on iPad

Hi,
I am having a weird problem and am wondering if anyone else has exprienced something similar. I've published a course as html5 (Captivate7, includes the patch from November), SCORM 1.2.
The course itself, and it's content, plays just fine on the iPad. However, whenever I zoom in, it crashes Safari. I have the course posted to our LMS.
To test if it's the LMS, I've uploaded the course to scormcloud, and it has played fine. However, I noticed, that user zooming seems to be disabled on scormcloud, so I couldn't actually check if it is simply the zooming in, that causes the issue, or if it is my LMS.
Has anyone else experienced this issue, or has anyone figured out a way to avoid this? I know it's possible to disable zooming into websites using meta tags, but am not sure how to make that happen with a file published from Captivate.
Thanks

This worked for me, thanks
dustinrwh
Re: iPad Mini Safari scrolling problem
Jan 1, 2013 11:15 AM (in response to amirfromcupertino)
I was dealing with this same issue an my iPad Mini. Here's what I did yesterday and I haven't seen the problem since:
1) Go to Settings >> Safari
2) Turn on Private Browsing
3) Clear Cookies & Data
I cannot guarantee this will always solve the problem, but it has worked for me.
Let me know if that works for anyone else :)
P.S. I'm a developer myself and I would give the software developers a little slack. Programming is more crazy than people think. Most likely they expected the iPad Mini to work exactly like the full-size iPad, but bugs always pop up. It will get fixed :) Chrome is always an alternative if Safari is struggling.

Repair Tool Performance Problem when Zoom on Image

Aperture Friends,
I experience a huge performance hit when editing images with the Repair/Clone tool only when "zoomed" into an image. The curious part is that the repair while "zoomed in" function works fine for about 3 images, then from the 4th image on, the software grinds to almost a complete stop for several seconds after selection a source point and trying to use the repair. The mouse cursor even changes to a spinning rainbow DVD look during this time.
These are 15-20MB Raw files from a Canon 5d and we are using the most recent version of AP on a nearly brand new iMac 27", of course with Snow L, and all patches applied. The library is less than 20GB and we are not using Reference files as of yet.
I realize that these may be large files, but it is curios that it works with blazing speed to start with, then degrades.
Is this a common problem, or an identified issue? Might you more experienced folks know a resoulution?

hi!
i'm experiencing a similar problem on my imac i5 with the difference it is slow all the time. even after a reboot it's quite impossible to use the clone/repair tool. my library is about 40GB with referenced files (all on external HD fw800). i work with a 5D Mk II (which is still not supported for tethered shooting, by the way!).
(sorry if i nicked your thread )
best regards,
günther

TS3899 iOS 7.02 mail tool crashes on a specific email when trying to delete or read

I have a "No Sender" email in my inbox, and the mail tool crashes when ever I try to delete it or look at it.

Hi, Nancy.
If the email in question has a blank sender and dated 1969, I would recommend closing all applications in multitasking and power cycling the device.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If the issue persists, access your mail account via webmail and delete the message that way.
Cheers,
Jason H.

Acrobat 8 Standard crashes when opening PDFs created from Microsoft Project 2007

Issue: Acrobat 8 Standard crashes when opening PDFs created from Microsoft Project 2007.
OS: Win XP Pro SP3
Error Message(s): None
Details: This issue happens with multiple Microsoft Project files (including new files), multiple PDF creators (included Acrobat 8 Standard) and on multiple computers. We also tried opening the PDFs in Adobe Reader 8 instead of Acrobat Standard 8. There is no record in the event log on the computers of the application crashes.

I may have a resolution now...
I clicked Tools -> Options -> View and turned off Bars and shapes in Gantt views in 3-D" on the advice of someone on a Microsoft Forum. I made three PDFs from three Microsoft Project files (that were having trouble previously) and was not able to get these PDFs to crash when zooming or changing pages. So far so good!
Regards,
Josh Gold
SERA Architects

Crash when starting a performance/memory profile

I'm having a catastrophic crash when I hit the 'Start' button in the Profile -> Performance and Memory... dialog. There is no error message whatsoever, and when I restart Labview, it only asks me about files to recover, it doesn't tell me where it crashed (i.e. somefile.cpp line ###). Well, it might have told me once, but now it doesn't, so unless there is a log of these things somewhere, I can't say much more.
I'm using Labview 2009, and I'm having the exact same issue on at least 2 machines which are fairly different (Win XP 32 bit vs Win7 64 bit (with Labview 32 bit)).
The application is pretty large (~1500 vi's), so it's kind of hard to tell what is making it crash.
The problem can be replicated in different ways:
1) Load main VI which loads all the VI's in memory
2) Start Performance/Memory profile *crash*
1) Load VI
2) Start VI (runs in a loop)
3) Start Performance/Memory profile while it runs *crash*
1) Start Performance/Memory profile
2) Some NI VI's show up in the list with '0' time everywhere
3) Load VI
4) Execute VI
5) Stop execution of VI *crash*
Any clues? Is there a log somewhere that could help me/you find the issue?
I could spend all day trying to load different parts of the project and look for problems, but I have no idea what to look for.
Last Friday I had successfully profiled what I wanted to, then I had another crash... Oh I remember now... I did a 'Search' in my project, looked for a particular string, and it crashed after a while in the middle of the search. Since then I was unable to use the profile tool. Could it be some data corruption? We use SourceSafe... so I wouldn't be surprised if it gave me a corrupted file If so, how could I find it?
Thank you

Hey Samapico,
I actually found an incident like yours involving the performance and memory tool crashing when used for specific VIs which were very large. How big (in terms of filesize) is your VI?
R&D found this issue in LV 2009 and fixed it in 2010 under Corrective Action Request 215410.
Is there any way you could try and test your issue out on a machine with LV 2010?
<Joel Khan | Applications Engineering | National Instruments | Rice University BSEE>

Psn crash when starting Driveclub

Was playing and talking to a friend when i was randomly disconnected, logged back in and when i started Driveclub the psn crashed again. Tried restarting my ps4, changing network and it works on other games. Does anyone else have the same problem?

Hey Samapico,
I actually found an incident like yours involving the performance and memory tool crashing when used for specific VIs which were very large. How big (in terms of filesize) is your VI?
R&D found this issue in LV 2009 and fixed it in 2010 under Corrective Action Request 215410.
Is there any way you could try and test your issue out on a machine with LV 2010?
<Joel Khan | Applications Engineering | National Instruments | Rice University BSEE>

Adobe Photoshop CS4/5 Crashes when using the Move Tool

Hello. I'm here because I'm having an issue with Photoshop.
I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
The error code, from Event Viewer:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x65637275
Faulting process id: 0xe28
Faulting application start time: 0x01cb2bb3471d87bf
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: unknown
Report Id: b412e368-97ab-11df-8f49-001d60b646ef
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-07-25T05:15:57.000000000Z
EventRecordID
78845
Channel
Application
Computer
Gatherum
Security
EventData
Photoshop.exe
11.0.2.0
4bf2d4f6
unknown
0.0.0.0
00000000
c0000005
65637275
e28
01cb2bb3471d87bf
C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
unknown
b412e368-97ab-11df-8f49-001d60b646ef
Details in XML View:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
<EventRecordID>78845</EventRecordID>
<Channel>Application</Channel>
<Computer>Gatherum</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>65637275</Data>
<Data>e28</Data>
<Data>01cb2bb3471d87bf</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>unknown</Data>
<Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
</EventData>
</Event>
System Specifications:
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
System Manufacturer: HP-Pavilion
System Model: GN697AA-ABA a6214x
Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
Memory: 2048MB RAM
DirectX Version: DirectX 11
Display Device:
Name: NVIDIA GeForce 8600 GTS
Manufacturer: NVIDIA
DAC Type: Integrated RAMDAC
Approx. Total Memory: 1010 MB
Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
Photoshop Version: CS4 Extended 11.0.2

Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process. That said, with a little research and care you can do it. Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
First, you'll need to know what your operating system capacity is. For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in. What version of Windows are you running?
Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches. There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
http://www.kingston.com/
It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade. Every computer is different.
If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
-Noel

Photoshop CC crashes repeatedly when zooming

Hey folks, I have been pulling my hair out trying to get Photoshop to stop crashing when I use the zoom tool. It will work fine for the first few zooms, then the next time I zoom Windows 7 will tell me Photoshop CC has stopped working. I have updated to the latest GeForce drivers with no success. Any ideas? I have included basic build info below. Thanks!
Build:
Core-i7 3770k
2 X GTX 580
32 Gb Ram
Lots of Hard Drives

What else have you done for general trouble shooting so far?
Photoshop: Basic Troubleshooting steps to fix most issues
And does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?

Adobe flash CS6 crashes when using the type tool or Editing word all the time... please help!

Adobe flash CS6 crashes when using the type tool or Editing word all the time... please help!

Nobody can tell you anything without proper system info or other technical details. The standard answer with all text issues simply is, that you have a "bad font" on your system and need to get rid of it.
Mylenium

Scribble tool crashes when zooming in

Similar Messages

Maybe you are looking for