Script alert error

I am using SC5 on a windows machine with XP operating system.  I have recently started getting a script alert that stops the process of copying files as follows.
In bridge I have made some adjustments in Camera Raw.   I slect a number of files I want to copy with the changes in Camera Raw.  Under the Tools menu I choose Photoshop - Image processor.  I make the slections I want (typically saving as JPEGs and in the same location with no actions).  It starts out Ok but then stops with a pop-up stating
Script Alert
Sorry, I could not process the following files:
E:\***
It will sometime write the first 15-20 files but not the remaining files.  I have purged my Cashe but it does not seem to help
Any ideas?

Names are Ok.  I believe it has something to do with the way my computer is handling my memory.  If I only slect 15-20 files it seems to work fine (though a lot slower than before).  If I slect 200 files it stops after processing 20 or so files?  In the past I never had this problem before.  I have also checked my hard drives and have plenty of space left.

Similar Messages

  • Script Alert: "Sorry I could not process the following files" (Error Message using Image Processor)

    I'm a seasoned Photoshop/Bridge CS5 user who recently upgraded to CS6.  In Bridge I just ran my first Image Processor batch, trying to convert a set of RAW .NEF files to .PSD files with a basic editing action I created applied to them.  Photoshop CS6 opens the files from Bridge and applies the actions, but then I get the "Script alert" error message "Sorry I could not process the following files" and a list of all of the files in the batch I was trying to run the script on.  The files all remain open and are saved on my hard drive in a folder created by the Image Processor script, but do not close unless I manually close them.  I never had this problem in CS5 where the image processor would apply the desired actions to the batch of photos one at a time, then save and close.  Thoughts on how I can fix this bug?

    Hey Jeff--
    No specific action steps to make the image safe - no flattening, etc. Had problems narrowing down the specific action step causing the problem. So I ran the Image Processor script in the ExtendScript ToolKit and debugged in. (I'm using the version that shipped with CS4.)
    Turns out what was happening is that the app.activeDocument.close() command on line 1490 was never getting called, because the this.SaveFile() above it was throwing an exception. More debugging got me to the problem - SaveFile() tries to restore the history state after making a doc safe for saving as a JPEG. This causes an exception. So I commented out line 1571:
    // app.activeDocument.ativeHistoryState = historyState;
    The script runs just fine after this. I commented out the close to see what history states got added to the doc, but no new states are recorded, so commenting out the restore line should not cause any problems.
    Of course, my solution does not solve the problem and I may need to comment out all the saveFile() lines that does this. Not sure why some actions have this problem and others don't. The actions I am running have about 25 steps. Perhaps PS is not catching up quick enough. I added a $.sleep(2500) after the restore history but that didn't help.
    So, not sure where this gets us. I will check about posting an action set with just one of the actions that cause the problem. But I may also have our customer comment out that line of the Image Processor script.
    Hope this helps. May post more next week.

  • OWA email shows "script alert undefined" message

    I have an internet enabled Nokia E71. when I try accessing my (web based) microsoft outlook web app mail through the web on the phone, ie. by typing web address as 'https://owa.*****.org/owa' then on entering the username and password mail account opens for a second and there is a pop up notification which say 'script alert: Undefined' and on clicking OK, another screen opens which says 'You have succesfully logged off from outlook web app'.
    It worked up until we upgraded our Exchange Server in August! any ideas?

    Hi friends,
    I am using N79 and get the same error. I tried different browsers, finally opera did it.
    Download  "opera mobile 12 (S60)" and it works fine with the OWA in light version as like tablets.
    To get Opera mobile click: http://www.opera.com/mobile/download/versions/
    Have Fun!!!

  • Javafx script alerts in Internet explorer

    Hi ,
    I'm getting about 4-6 script alerts in internet explorer when i load the javafx applet in browser.Following is the code i',m using to load the javafx applet.
    <script>
                                                                    javafx(
                                                                        archive: "/sisJars/VideoPlayer.jar",
                                                                        width: 646,
                                                                        height: 375,
                                                                        code: "com.sis.recordit.jfx.player.Main",
                                                                        name: "Player",
                                                                        id: "Player",
                                                                        jnlp_href : "/jnlp/videoPlayer.jnlp",
                                                                        xyz: "abc"
                                                                </script>It would be very helpful if someone suggests the possible cause of error.
    Thanks in advance

    I have included the dtfx.js file in the html head block.
    Regarding line number, i'm just getting alert with the message "syntax error" but i cannot see any line number.so i'm not sure if i provided the information you asked.If this is not what you asked, please let me know what to provide ,so that i can provide with the information you need

  • "Script Alert" cannot upload files

    I am using Photoshop CC 64bit. I used the program yesterday and worked like normal. Tried to use the Scripts image processor and it gave me this warning. I keep trying it and sometimes some files work but I still can't open them up. What can I do?

    Was there a script line number in the message???
    The alerts I see  none seem to be about upload??? and the string "upload" is not in the script.  There is one alert the first one that catches errors but it should include the line number of the script statement that encountered the error...
    Here are the alerts I see in the script;     
    alert( e + " : " + e.line );
    alert( strSpecifySource );
    alert( strSpecifySource );
    alert( strSpecifyDest );
    alert( strSpecifyDest );
    alert( strJPEGQuality );
    alert( strJPEGWandH );
    alert( strTIFFWandH );
    alert( strPSDWandH );
    alert( strOneType );
    alert( strNoOpenableFiles );
    alert( strCannotWriteToFolder + File( subFolderText ).fsName );
    alert( strCannotWriteToFolder + File( subFolderText ).fsName );
    alert( strCannotWriteToFolder + File( subFolderText ).fsName );
    var message = strCouldNotProcess;
    message += File( this.fileErrors[i] ).fsName + "\r";
    alert( message );
    alert( strWidthAndHeight );
    alert( strMustUse );
    alertNonSavedDocs = true;
    alert( strMustSaveOpen + "\r" + strFollowing + "\r( " + nonSavedDocs + " )" );
    ; // alert ("Ack! bug in NumericEditKeyboardHandler: " + e);     

  • N8 Social App Err-Script Alert

    Of late im getting Script Alert while logging to Social App for Facebook.
    Has anyone experiencing the Social app error .It was well n Good previously
    Script Alert :
    Sorry,Please Uninstall or Re-Install Communities

    I too have this problem suddenly this weekend. Have been running my N8 for several months without this kinda problems. Have done nothing special and all of a sudden got the script error of 'uninstalling .. re-install'. Re-installing it with 'SW Update' only works when manually removing 'Social' AND 'Social Installer' (in dutch the latter is something like 'Inst.Social ..'). This will install version 1.2.163. But this still leads to the script error.
    Other solutions include manually installing "Social+Apps.zip", with intermediate reboots. This will install version 1.2.144 first and then 1.3.143. I have done this with all sorts of combinations with(out) reboots, but none of this helps.
    Installing 'Social' via Ovi-store of now, will result in the latest version (with an 'Anna' alike icon) 1.3.215. However this one also doesn't work anymore in this case. It will just give a script-alert like 'plug-in not loaded .. resuming in demo mode'.
    Searching on the net for solutiond, this one with the Factory reset (incl. delete data!) is the only one that seems to work .. but only when you don't restore your backup. I have read about someone who done this and it keeps working, but perhaps this person has done a partial restore? Don't know. Anyway, I had recently backuped all my things. I did remove the 'Social' app (and some dutch app called 'Buienradar' also - this one has given me black screens ever since) So my backup was quite clean. I did the 'Factory reset' plus 'Delete data' which gives an initial clean N8. After this even the latest version of 'Social' (1.3.215) works like a charm. And also my ducth app 'Buienradar' worked normally again. But .. after restoring my backup the problem is back...
    So it didn't solve anything for me ( And on the bad side, I also lost all my conversations from 'Whatsapp' during this backup/restore (wihich is weird on it's own also).. ( But anyway, perhaps someone has some other ideas on this? Perhaps a restore without 'application settings'? I don't know. Have spent soooo many hours on this stupid issue already, so I would very much like to have a working solution, please.
    thanks,
    tanya

  • How to creat a "The command is currently not available" script alert?

    I'm working to construct a Configurator-like panel whose buttons play actions located on Photoshop's regular Actions panel.
    I'm using Eclipse and the EB3 plug-in and have made decent progress.  Here is a sample of code from the Photoshop.jsx file that is executed for one of the buttons.
    $._ext_CURVESLAYER={
        run : function() {   
            doAction('Curves', 'Adjustment-Layers');
    Very basic.  Just a doAction command to find the necessary action set and action and play it.
    When using Configurator and the necessary action is NOT present on Photoshop's regular Actions panel, a script alert is generated that says  "The command is currently not available"
    The panel I've created using EB3 doesn't provide this alert.  Nothing happens when I click a button on the EB3 panel whose action is missing from Photoshop's regular actions panel.  I'd like to be able to generate some type of message, like this script alert, if the action in the doAction command doesn't run as expected.
    It looks like Configurator may have used this code to generate this script alert base on the fact that it contains the words : "The command is currently not available"
    function ps_invoke_action(actionSet, actionName)
        var action = decode(actionName);
        var group = decode(actionSet);
    writelog("invoke action " + action + " " + group);
        ErrStrs = {};
    ErrStrs.USER_CANCELLED=localize("$$$/ScriptingSupport/Error/UserCancelled=User cancelled the operation");
        try
    app.doAction(action, group);
        catch(e)
            if (e.toString().indexOf(ErrStrs.USER_CANCELLED)!=-1) {;}
            else
    alert(localize("$$$/ScriptingSupport/Error/CommandNotAvailable=The command is currently not available"));
    I don't know Java at all, but I'm pretty sure this code doesn't work with the EB3 panels.  I tried copying it into the ext.js file and it had no effect.  (Most of this has been trial and error for me, and I thought that would be worth a try.)
    Can anyone help me with the code I need to use to generate the appropriate script alert if the doAction command doesn't run properly and where to put it in the various files required for an EB3-generated panel?
    Thanks!

    Hi,
    As per my knoledge, there is no automatted way to find out from which (Command line, Application and Script) the application is running. here
    i am suggesting some guidelines as specified below.
    1. Define standard arguments codes for the decrypt program like.
    1 - for Application.
    2 - for Script.
    3 - others.
    if(args[0] == 1)
    Decrypt PWD
    else if(args[0] == 2)
    DO Some thing
    else if(args[0] == 3)
    DO Some thing
    else
    -- Do not Decrypt --

  • My toolbar is missing and there is a button where it used to be that says "Please re-install the Toolbar" but when I click on it nothing happens? Also when I start Firefox I get a script running error how do I solve these issues?

    My toolbar is missing and there is a button at the top left that asks me to "Please re-install the Toolbar" but when I click on it nothing happens???
    Then when I start Mozilla I get a long delay before it launches and a script running error "A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
    Script: chrome://tavgp/content/libs/include.js:595"
    How do I solve these issues???

    No idea - and you provide no clues
    what version of iPHoto do you have? Of the OS? is the iPhoto icon you are speaking of in the Dock?
    re-read your post and try to provide information using standard Mac terms since we can not see you or your computer and only have your worrds to let us try to help you
    Somehow my "IPhoto" icon now says "Preview".  When I click on "Preview" nothing opens up except the bar says Preview.  When I click on the Preview on the bar, a box opens up with different items, except when I click on any of them, there is nothing there.  The only thing that work is the "quit preview".  However, it is still there where my IPhoto icon should be.  I can't get into my IPhoto.  How do I get rid of this "Preview" and how did it end up taking over the IPhoto icon???
    If you go to your Applications folder and double click on iPhoto what happen?
    LN

  • Ever since I downloaded FF's v6, everytime I go to YouTube and open a video, I get an error message that says: "[Java Script Application] Error: Div is null" How do I fix this problem?

    If I go to YouTube, no matter what video I click on to watch, the error message "[Java Script Application] Error: Div is null" pops up. It started happening right after I updated to FF v6. I also have installed the latest version of Java. I submitted this question a few weeks ago, but never received a reply.
    Thanks for any help you can provide to fix this.
    Scott Cromwell
    [email protected]

    hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • Script Alert: can't find .js files even though they're in the folder that the program looked in to?

    I'm new to the whole After Effects community and I am currently using it for a project.
    I followed a tutorial by Mt. Mograph on youtube and I downloaded the script "Ease and Wizz".
    I have it as a panel and all, but every time I attempt to apply my desired expression, a popup box says that there is a script alert and it can't find the file for the expression.
    Is there something that I'm doing wrong? I have tried to remove the script and download it again, but nothing has worked for me.

    Try to copy "easingExpressions" folder that came with the script into this folder:
    C:\Program Files\Adobe\Adobe After Effects CC 2014\Support Files\Scripts\ScriptUI Panels\

  • CS3 "Script Alert" !?

    Hello !
    Using my (licenced and registered) Photoshop CS3 Extended to process my NEF files coming from my Nikon D300 never made a problem, ...till yesterday !
    It first opens under Bridge CS3 (as usual) to be able to roughly tune the exposure, light and general contrast if needed and then arrives into Photoshop CS3 itself by clicking "ok".
    It is at that very moment that I get a message on screen.
    Here is the text:
    "Script Alert ! Nikon Corporation, Nikon D300 was used to shoot this file."
    This being followed with the usual "OK" button to go on (and it goes on without any problem).
    Why do I get this message each time ?
    How can I do in order to prevent this message to appear each time I open a (Nef) file made with the D300 ?
    Did some of you experience this before ?
    Thanks a lot for your help and kind cooperation !
    PS: I made a trial with a Nef File from my other Nikon (D200) and the problem does NOT happen ! I don't understand...
    Pol

    Hello !
    I am the kind of guys who want to understand the "why" of a situation, and as I mentionned in the beginning of my thread, it is the main reason why I asked this question in this place.
    Thanks to all who tried to guide me and help me with the "problem" I had.
    Before doing a reinstall of the software, which is indeed the easiest way to solve many encountered problems, I looked a bit further ...and finally found the "why" of this recurrent alert message !
    It is just one line in the msconfig !
    >Start >Execute "msconfig", then "OK"
    In the new window select the colum "starting programs" (or "start") and you will find in the list just one line which has to be desactivated under the name of "Nikon Monitor".
    Apply and restart the computer ...the Script Alert won't appear any longer !!
    Happy I found, I really feel better :o)
    Hope this will eventually also help other users of Photoshop CS3 Extended who encountered the same problem !
    Pol

  • What does this actually mean and how do I fix it: Alert: Error Count Monitor Resolution state Object Hyper-V Virtual Storage Device Has a value

    We are getting this alert on a fair few of our VMs with VHDXs and Dynamic VHDs. Everything seems OK but I am not sure what this actually means and what I need to do to resolve the issue. How do I reset the error count if that is what is required? Thanks
    in advance.
    Alert: Error Count Monitor Resolution state: New
     Error Count Monitor Source: MyVm01 Path: MyHost.MyDomain.local;MyHost.MyDomain.local;FE71577B-A2E2-45C0-B757-2FBCEC9311DE Last modified by: System Last modified time: 2/9/2013 2:08:48 PM Alert description: Instance c:-clusterstorage-volume1-MyVm01-virtual
    Sat 09/02
    To:Administrator
     09 February 2013 14:09
    Alert: Error Count Monitor
    Source: MyVm01
    Path: MyHost.MyDomain.local;MyHost.MyDomain.local;FE71577B-A2E2-45C0-B757-2FBCEC9311DE
    Last modified by: System
    Last modified time: 2/9/2013 2:08:48 PM
    Alert description: Instance c:-clusterstorage-volume1-MyVm01-virtual hard disks-MyVm01-DATA02.vhdx
                Object Hyper-V Virtual Storage Device
                Counter Error Count
                Has a value 9
                At time 2013-02-09T14:08:48.0000000+00:00
    Darren

    But I am getting this alert from SCOM and SCOM has no information about the alert for me to find out what to do - thought that was the point of SCOM to let you know of problems and how to resolve them. :)
    The alert is coming from the Error Count Monitor that is part of the Hyper-V Management Pack Extensions (v 4.0.0.0)
    I have tried looking in the Event Logs on the Host and there doesn't seem to be any storage related errors there. I am trying to establish if this is a false positive, why it is happening and if it is safe to override and ignore.
    There is nothing on the Product Knowledge tab and nothing on the Alert Context other than what I have already mentioned (see below).
    Thanks for responding.
    Time Sampled:
    09/02/2013 14:08:48
    Object Name:
    Hyper-V Virtual Storage Device
    Counter Name:
    Error Count
    Instance Name:
    c:-clusterstorage-volume1-myvm-virtual
    hard disks-MyVM-DATA02.vhdx
    Value:
    9
    Darren

  • Script Alert "You should only run scripts from a trusted source."

    I created a small javascript which opens Photoshop and resizes some images.
    I want to be able to double-click the .JSX file from Windows Explorer, and have Photoshop execute the script. Likewise, I want to be able to run the .JSX file from the command line.
    The script runs perfectly. However, the problem is that I don't want any user interaction. I want to be able to run the script from the command line without the user having to click anything. What happens now when I try to run the file from Windows Explorer of the command line is, I get a Script Alert with the following text:
    You are about to run a script in Adobe Photoshop CS3. You should only run scripts from a trusted source. Do you want to run the script? Yes/No
    Is there any possible way to bypass this message or to answer in the affirmative?
    Thanks,
    Jamie L.

    Hi... Sorry to revive such an old thread,
        Does anyone know the "trusted source" folder for MAC CS4.
    EDIT!
    My bad.  "The /users/<user_name>/documents/Adobe Scripts" folder is working for this purpose for me.  I needed a path to it and forgot that the ~ resolves to the current user.  Sweet.
    -Bill

  • MDX script editing error generated at each keystroke

    I'm having the same issue in VS2012. When I edit an MDX script the error window pops open between each keystroke. I have to copy the script into notepad, edit, then return it to the MDX editor. Very annoying!!!

    Actually I get it in the Calculations tab of SSAS 2012 while inside Visual Studio 2012. I can toggle back and forth between script view and form view without error (and the build is clean), but when I start to type anything in form view it pops up the error
    window between every single key stroke.
    I've looked for options to turn off automatica error checking but don't see anything like that.
    chris choate
    Hi Chris,
    Could you please post the detail error message to us for further investigation? If possible, please post a screenshot about this issue.
    Personally, you can try to reinstall Business Intelligence for Visual Studio 2012 to see if this help.
    Microsoft SQL Server Data Tools - Business Intelligence for Visual Studio 2012:
    http://www.microsoft.com/en-us/download/details.aspx?id=36843
    Install SQL Server Data Tools - Business Intelligence for Visual Studio 2012:
    http://technet.microsoft.com/en-us/library/jj856966.aspx
    If you have any feedback on our support, please click
    here.
    Best Regards,
    Elvis Long
    TechNet Community Support

  • Java script Alert-"Adobe Flash Player has stopped a potentially unsafe operation". Can't enable it.

    I am running Windows 7 SP1, Presenter 7.0.0 version 7328 and Powerpoint 2007 (v12.0.6525.1000.)
    My powerpoint file is running in 97-2003 compatibility mode, and I have produced a Presenter project with a link to some web content (a youtube-like video).
    In Firefox browser v23.0.1, I can open the Presenter project from it's html starting point, right click on the SWF presentation as it is running, select global settings, on the advanced tab select trusted location settings, enter the website adress to the youtube-like content, and close the browser, reopen it, and the content launches without a Java script alert.
    The Chrome browser will not do this. (Version 29.0.1547.76 m) (We are not using IE)
    Even setting the web page security permission from the control panel and rebooting will not hold the website in place in the Flash Security settings.
    Even going to the web site and editing directly will not work for chrome - ie, here:
    http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l
    By the term "not hold the setting" I mean upon reboot the website is no longer listed as trusted in global settings, nor in Chrome, nor in Flash security settings via Control Panel in W7. It IS listed in Firefox global settings as trusted, and so the content launches from Firefox, as said.
    Firefox is persistant, Chrome is not, and so - is it a buggy Flash Security setting issue? Or a windows/chrome issue? Or my poor local machine....
    Anyone have any ideas?
    /brad

    Hi Chris:
    Thanks for the fast reply!
    I looked. Unfortunately, the people viewing it have their laptops locked down, so cannot access the Internet, Control Panel or Flash Player Settings. So the suggestions there do not help. Anything that you suggest?
    Is there anything I can do at the production end to help?
    Thanks again for your response. It is a bit of an urgent situation, so I really do appreciate it.
    Lavern Wiebe
    <mailto:[email protected]> [email protected]
    Ph: 630.585.5450

Maybe you are looking for