Script Editor does not work. Panel blue and empty.
Hi
I installed Oracle Database XE yesterday on
Acer TravelMate C300, Microsoft XP SP2 Tablet Edition
and ..
I cannot read SQL scripts
I cannot access to the editing panel of Scripts Editor when I want to create a new script.
I used System and HR login.
The panel is blue and empty.
Thank you for any information
Best regards
JRD120
I cannot read SQL scriptsWhere you want to read SQL scripts?
I cannot access to the editing panel of Scripts
Editor when I want to create a new script.About which "Scripts Editor" you talking about? From TOAD?
The panel is blue and empty.Panel??
Similar Messages
-
I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.
Hi Hardy Tasso,
Are you seeing this problem since first launch of PSE13 after installation or recently?
Please try:
Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
Thanks,
Anwesha -
adobe photoshop elements 12 organizer works, but adobe photoshop elements 12 editor does not work--it thinks it is a trial version.HELP
If I try to register 4 boxes circle endlessly.Why should I have to register editor separately from organizer?jaroFocb'15 wrote:
This is almost the same as the problem I had. I'm my case the Editor installed but not the Organizer! Adobe chat told me they no longer have chat or any other services for Elements 12. I guess they want people to buy their new Elements 13, but that leaves us in a bad place and doesn't say much for how Adobe cares about their customers After it moves on to their next version. I posted a message like yours over a week ago, and only got one email from an Adobe staff person, asking me to answer a couple of clarifying questions, but he never followed up on my response, so my problem is still unresolved. If you are luckier and are given a solution please let me know what it is -- it might work for me too, and I'd be very grateful! My email: [email protected]
Good luck.
Have you checked whether you have folder for PSE Organizer? It is normally at this location in Windows 7 and Windows 8/8.1:
<C:\Program Files (x86)\Adobe\Elements 12 Organizer>
If the folder is there then try double-clicking on the file called: PhotoshopElementsOrganizer.exe
If the folder isn't there at all then you need to re-install the package again using your original disks or from download from Adobe website. <Download Photoshop Elements products | 13, 12, 11, 10>
Hope this helps. -
tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off
Try a hard reset and go from there. You might try a manual install (using DFU Mode), as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
Select All in a table does not work for Drag and Drop
Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
Does anyone know how to get Select All to work for a Drag Source?
Thanks.
-EdFrank-
OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
Thanks again for the reply.
-Ed -
iPad Air 2 with celluar with ios8.1.2 will not airplay with apple tv slideshows with music. I see the slides on the TV but do not hear the music. This works on the iphone 5s with iOS 8.1.2 and with my other iPad which is on iOS7.
This problem was reported on Nov 21, 2014 and other people had reported it prior to me.
When will this be fixed by Apple - it worked in the past and does not work now.
Should i return my iPad Air 2 and get my money back?Problem seems to be resolved. Should have thought of it myself ;-) thanks so far!
-
Despite my spell check being set, it does not work in Hotmail and some other websites.
I have the setting for spell check set up but it does not work on some sites like hotmail. I go to the spell check button in hotmail and it tells me that my browser will automatically check as I type but it doesn't. I've searched to override this or to get the spelling checked independently but without any luck, Any suggestions?
Not all locales come with a dictionary installed for licensing reasons.
If you do not have the en-US locale then check that you have a dictionary installed (Tools > Add-ons > Extensions).
You can see which dictionary is selected if you right-click in a text area and open the ''Languages'' submenu.
Also make sure that [[X]"Check Spelling" in the right-click context menu has a tick.
You can also try to toggle the "Check Spelling" item off and on again.
See http://kb.mozillazine.org/Spell_checking and [[Using the spell checker]]
See also http://kb.mozillazine.org/Dictionaries
You can look here for more dictionaries:
https://addons.mozilla.org/firefox/browse/type:3
https://addons.mozilla.org/en-US/firefox/addon/3366 (English (British)) -
WCCP does not work between WSA and ASA
I have configured WCCPv2 between WSA S160 ( 6.3.1-025) and ASA5540 (8.2(1)109).
Everything seems to be OK by "show wccp *" on ASA and showing wccp debugging messages (level 4) on S160. Despite of it, WCCP redirection does not work.
If I use packet-capture I figure out that S160 receives GRE packets with TCP SYN from particular LAN host to WWW sites but S160 does not handle them and does not send anything back to ASA.
It is an Exempt from authentication for this LAN host and in Forward proxy mode everything works well.
I have attached an example of a packet-capture (S160.txt - renamed from .cap) and debugging messages from S160 & "show" from ASA.
Does anybody have any idea what the problem is and how I can resolve it ?IronPort Support team helped me to find the trouble:
If I wish to handle specific port's (80, 8080, etc.) traffic by the transparent proxy I need to configure this port like a listener for the FORWARD proxy
("Security Services" -> "Proxy Settings" -> "HTTP Ports to Proxy")
The WSA guide doesn't clearly say about it.
So the Discussion can be closed ... -
One speaker of my i phone 4s does not working any more and my phone still new ?
One speaker of my i phone 4s does not working any more ? and it s still new !
There is only one speaker, other side is microphone. You
may wish to download and become familiar with the user guide.
It is a link in Safari on your iPhone, you can download the user
manual after you download iBooks app, or you can find it here:
http://support.apple.com/manuals/#iphone -
I finally got so tired of Firefox freezing my computer that I tried to uninstall and reinstall. Upon reinstall, it will not work at all and I am unable to delete my old user profile. Is there any way to get rid of this profile so I can give one last attempt to get Firefox to work before switching permanently to Google Chrome? I really liked Firefox for years until they screwed it up with the recent changes.
Try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.
-
Scripting Context - Does not work as invocable?
Hi
I am using the Java Scripting implementation, in my case Rhino, and actually I am very happy with it. Nearly everything runs as expected. But there is one thing regarding Context per Script, actually bindings because of variables per script.
I had a look at http://java.sun.com/javase/6/docs/technotes/guides/scripting/programmer_guide/index.html#scopes and if I do it like that everything works fine. Now, I have a script with several functions and I want to invoke specific functions. Again I take that example and extend it to something like:
engine.eval("function printSomething() {println(x);}", newContext);
In my "small world^^'" this should do the same, but I have to invoke printSomething:
Invocable inv = (Invocable)engine;
inv.invokeFunction("printSomething");
If I do so, I get a
java.lang.NoSuchMethodException: no such method: printSomething
What am I getting wrong? I want to do the same as in the example, provide another Script with another Context (specifically Bindings), but as soon as I invoke the function, it says the function is not available even if it is very much visible.
If I remove the
newContext
from
eval()
it works, but does not have the other Binding.
How can I make that happen?
I hope this is the right forum and someone can "light me up" where I just see darkness right now.
Many thanks in advanceYour script needs something from the default context.
When you create a new context it will not work anymore.
Just get hold of the original context (or a copy of it) and add your bindings
and pass that.
Something like [http://forums.sun.com/thread.jspa?messageID=10978511#10978511] -
Action Script 3 code not working for start and stop button?
Ok so I have this simple animation I created of a circle that moves from one side of the stage to the other. I have added a new layer and called it buttons. On this layer I have added 2 buttons. One for start and another one for stop. The purpose is to get my circle to move from one side of the stage to the other but be able to use my buttons so that I can start and stop the animations at random times during playback. I fixed all my compiler errors now the problem lies in that everytime I click the start or the stop button I get an output error. I have a 3rd layer in which is titled actions and this is where all my code is posted. I removed that layer and placed my code in the first frame of the buttons layer to see if this would change anything but I still get the same output errors. So I just added back my actions layer. What could I be doing wrong? I have made sure to name all my movie clips and buttons correctly and I even added an instance name to them.
Here is my code and the errors I am getting when I press the play and stop button on test-
start_btn.addEventListener(MouseEvent.CLICK, startCircle);
stop_btn.addEventListener(MouseEvent.CLICK, stopCircle);
function startCircle(e:MouseEvent):void{
circle.play();
function stopCircle(e:MouseEvent):void{
circle.stop();
green_btn.addEventListener(MouseEvent.CLICK, greenCircle);
red_btn.addEventListener(MouseEvent.CLICK, redCircle);
function greenCircle(e:MouseEvent):void{
circle.play();
function redCircle(e:MouseEvent):void{
circle.stop();
Here are my output errors-
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at exercise2_fla::MainTimeline/redCircle()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at exercise2_fla::MainTimeline/greenCircle()ok so my circle is my movie clip and it is titled circle and the instance name is circle. Am I supposed to change MovieClip to circle? I put the code at the top of my actions script but for some reason it did not work. I did change play to stop and it got the movie clip to stop when I do test movie but my buttons still do not work. So I changed stop back to play. Strange.
I did try changing MovieClip to circle but that did not work so I did Circle with a capital C and that did me no good eigther.
I meant to add that I did get an error that said- 1180 Call to a possibly undefined method circle. -
Flash Player Does Not Work with IE8 and Windows XP
I am using Windows XP VR 5.1 with SP3. Flash Player does not function? So videos will not play that use Flash Player. The Adobe Support Site has been 000 Help because it is a free product. Microsoft says it is an Adobe problem. Finger pointing to the nth degree. I have loaded the latest version of Javascript and Flash Palyer.. Any ideas?
Resetting IE is a shotgun approach, but may be much easier (and faster) for a user than trying to troubleshoot and find exactly which add-on, control, setting is causing issues. For a fast approach, you can reset IE, then start re-installing the add-ons you wish to use. Here is a kb that describes the process and even provides a Fix it: http://support.microsoft.com/kb/923737
If you’d like to troubleshoot, here are some steps that will fix most issues with Internet Explorer and Add-ons. This can be more of a scalpel approach, and could help you save your cookies, stored passwords, etc.
1) Update your Windows software
a. Follow the steps below to view updates that are available for your computer.
i. Click to go online to the Windows Update website
1. Note: If Microsoft Update is not installed, you will be taken to the Windows Update website. See the note below if Microsoft Update is not installed.
ii. Click Custom to check for available updates. In the left pane, under Select by Type, click each of the following links to view all available updates:
1. High Priority
2. Software, Optional
3. Hardware, Optional
iii. Select the updates you want, click Review and install updates, and then click Install Updates.
b. What do I do if Microsoft Update is not installed?
i. Follow the steps below to install Microsoft Update and check for updates.
1. Click to go online to the Windows Update website
2. Click the Go button next to the Get Microsoft Update Today and then click Start Now.
3. Review the license agreement, and then click Continue.
4. After setup is complete, click Check for Updates.
5. Click Custom to check for available updates. In the left pane, under Select by Type, click each of the following links to view all available updates:
a. High Priority
b. Software, Optional
c. Hardware, Optional
6. Select the updates you want, click Review and install updates, and then click Install Updates.
2) Turn off Internet Explorer add-ons you don't recognize
a. When you visit a website, an add-on might be downloaded without your knowledge, or you might be prompted to download an add-on. These add-ons might cause Internet Explorer to run slowly or become unresponsive. You should remove all Internet Explorer add-ons you don't recognize or trust.
b. How do I spot malicious add-ons?
i. You can usually spot malicious add-ons under the Name column in the Manage Add-ons dialog box. Malicious add-ons might have:
1. Blank names.
2. Names that include random characters or have a sequence of numbers and letters (for example, fhriduvh.dll or f6rid8vh.exeas as opposed to Windows Messenger).
3. A publisher name you might not recognize.
c. How do I disable an add-on?
i. Open Internet Explorer.
ii. Depending on your version of Internet Explorer, do one of the following:
1. In Internet Explorer 6, click the Tools menu, and then click Manage Add-ons.
2. In Internet Explorer 7, click the Tools menu, point to Manage Add-ons, and then click Enable or Disable Add-ons.
3. In Internet Explorer 8, click the Tools menu, click Manage Add-ons, and then click Toolbars and Extension (if necessary). Also note the drop down list labeled “Show:” You are interested in Add-ons and Downloaded
4. Follow these steps to determine the version of Internet Explorer you're using:
a. Open Internet Explorer.
b. Press ALT+H, and then click About Internet Explorer.
c. How can I find which version of Internet Explorer I'm using if it won't launch?
i. If you're unable to launch Internet Explorer you can use the following steps to determine the version you're using:
1. Click Start, click Run, type %ProgramFiles%\Internet Explorer, and then click OK.
2. Right-click iexplore, click Properties, and then click Version.
3. Under Item name, click File Version. The version number appears under Value to the right of File Version.
a. Note:If the file version number begins with 6, you have Internet Explorer 6. If the file version number begins with 7, you have Internet Explorer 7. If the file version number begins with 8, you have Internet Explorer 8.
d. If you aren't using the latest version of Internet Explorer, consider updating.
i. How do I update to the latest version of Internet Explorer?
1. Click to download and install the latest version of Internet Explorer
ii. How can I update Internet Explorer without launching my web browser?
1. Click to go online to the Windows Update website.
2. Click Custom to check for available updates.
3. In the left pane, under Select by Type, click Software, Optional.
4. Select the Internet Explorer update, and then click Review and install updates.
iii. Click the name of the add-on.
1. Click Disable. You might have to restart Internet Explorer for the changes to take effect.
2. Why do some add-ons include (Not verified) in the Publisher column?
a. If (Not verified) is displayed in the Publisher column in the Manage Add-ons dialog box, the add-on itself is not digitally signed even though the program that installed it might be. A digital signature verifies that a file comes from the person or publisher it claims to be from, and that no one has tampered with it since it was digitally signed.
3. How do I disable an add-on if I can't access Internet Explorer?
a. Click Start, and then click Control Panel.
b. Double-click Internet Options.
c. Click the Programs tab, and then click Manage Add-ons.
d. Click the name of the add-on you want to disable, and then select Disable.
e. When the Add-on Status dialog box appears, click OK to close it.
3) Perform a free Full Service Scan using Windows Live OneCare safety scanner (not necessary if you don’t suspect viruses and are confident in the protection you have on your machine).
a. Go to the following website, and then click Full Service Scan: Windows Live OneCare safety scanner
i. http://go.microsoft.com/fwlink/?linkid=56726
If you are still experiencing issues, perform these steps. If the issue subsides, you may discontinue the remainder of the steps
1) Disable all add-ons (one at a time) until you can no longer reproduce the problem
a. Close all Internet Explorer windows.
b. Click Start, and then click Control Panel.
c. Click Network and Internet Connections, and then click Internet Options.
d. Click the Programs tab, and then click Manage Add-ons.
e. Click the name of the add-on you want to turn off, and then, under Settings, click Disable.
f. Click OK.
g. Restart Internet Explorer. Continue using Internet Explorer the same way you did when you received a crash report. If Internet Explorer continues to crash after disabling this add-on, continue with the next step.
h. Repeat steps b through g for each add-on listed. When you can no longer reproduce the problem, the most recently disabled add-on is the cause of the problem. Once you discover the add-on that is causing the issues, you can uninstall it (use Manufacturer’s uninstaller if one is provided) then if you wish to continue to use the add-on, install the latest version from the manufacturer’s site. -
DHCP Server does not work after Exporting and Importing Using Netsh Command
Hello Friends :
I had two dhcp servers in windows server 2003 server , I have upgraded one of them to windows server 2008 32 bit and again i installed a windows server 2008 R2 as an additional Domain Controller , the last scenario was like this :
srv-1 : windows server 2003 + DHCP = working with no problem
srv-2 : windows server 2003 + DC + DHCP = Worked without problem
srv-3 : windows server 2008 R2 + DC = worked without any problems
I exported the DHCP server configuration on the srv-2 using netsh dhcp server export and Imported them to srv-3 using the
netsh dhcp server import command , the command completed successfully and i can see all of the scopes without any problems and errors , i have authorized the new server without any problem , all scopes are activated without any problem so i
disabled the srv-2 DHCP service and unauthorized it from active directory , the problem is that the new server semms that does not lease any address to clients !!!
1- I have authorized it
2- I used Rogue Checker tool in client computers they see authorized server without any problems
3- The same tool in workgroup only shows srv-1 as the DHCP server and does not see other DHCP servers
4- Bindings are OK and DHCP servers only have one NIC installed on them
What can i do to make sure my srv-3 DHCP server will work on the network ?
thanks ...
MIMOAre the clients on another network so you need to configure a DHCP relay agent?
If you load up perfmon on the dhcp server and remove all counters and then add DHCP counters. Do you see any dhcprequests when you reboot your dhcp clients? This will determine if your server actually receives any dhcp requests.
Have you check event viewer for any warnings or errors?
And the classic one restarted the dhcp server service (or reboot)?
Regards Per-Torben Sørensen http://pertorben.wordpress.com/ -
CC does not work after Uninstall and reinstall
Adobe 24/7 help online does not solve the problem. They come up and said to uninstall all, and as the result, I can not access ALL my software. Please help. Error message screen shot attached below.
This is on Home PC, OS: Windows7, 64bit, Core i5, 3.1GHz, 8GB RAM, was working properly more than a year or two. Now, I can not see ALL apps and the only see the "spinning wheel" for 10 minutes and shut down.The Online chat support team ask me to do these stepts:
1) End all the Adobe related processes from the Task manager like Adobe CEP Helper,AAMupdater, AAMupdater notifier, Adobe Crash demon process, Coresync ,Creative Cloud.
2) Deleting the folders in various locations
3) Install the Creative Cloud Cleaner (.exe file) and run, clean ALL CC things
4) they give me a link to download and reinstall the CC
5) at the end, all the same problem. giving the same message as before "Microsoft Visual C++ Runtime Library - Runtime Error! Program: C:\Program Fi... "This application has requested the runtime to terminate it in an unusual way. Please contact the application's support team...."
Also, the support guy ask me to uninstall ALL CC Apps and I did it. NOW I have nothing left on my computer and I can not work. HELP
Maybe you are looking for
-
How to turn OFF Organize by Conversation in all mailboxes at once and set it as default?
The Apple Mail Organize by Conversation is not working properly on Mail 6.5 on Mac with OS X 10.8.4 (Mountain Lion). How to turn off such Organize by Conversation in all mailboxes of at once and leave it off as default for past and new messages?
-
Should I update my SMC firmware?
I use YES method to keep my both cores runing in its full speed over 7 seven minutes and returned no any random shutdown. Should I keep updating my SMC firmware? My Macos is 10.4.6 and SMC is 1.4f8. I didn't have any update since this July.
-
Define back ground job for Maintenance Order Settlement through KO8G
Hi Experts, I need to define back ground job for Maintenance Order Settlement through KO8G transaction code. Here are the requirements 1. The job should run on weekly basis automatically. 2. The settlement period and posting period should be taken ca
-
Solaris 8.0 installation problem
i am a beginner of sun solaris 8.0. But i use Linux frequently. now am trying to install solaris8.0 in my pc.( intel P-4 , 256MB ram, MSI main board ,40 GB HDD) My hard disk geometry is.... No type system 1. primary ( NTFS) winXP 2. primary ( etx2) L
-
Can you buy iTune gift for some one in a different country
I live in canada and would like to buy itune gift for someone in the USA how do I do this? Is it possible?