Script Error on opening Crystal Reports

Hi
In the last couple of months a few computers in my office with Crystal Reports are having a few problems. The main one is on opening the program, I get the following error message:
Script error
Line 0
Position 1
<!DOCTYPE HTML PUBLIC"-//W3C/DTD HTMAL 3.2 Final//EN">
Since this has been happening, I have noticed that Crystal will throw unhandled exceptions and just shut the program on more complex reports. It also cant check for updates.
I was just wondering whether this was anything to do with a Microsoft update or whether there is a fix for this problem.
I have Crytal Reports Developer Product Version 11.0.0.895 (I cannot run any updates) on Microsoft XP Pro.
I would be grateful for any ideas how I can solve this issue.
Thanks
Nic

Hi niceastham,
Check the following thread
HTML Preveiw for Crystal report
Re: HTML In Crystal Report
Re: HTML Interpretation Behavior
*Close the thread if issue solved.
Regards
Jambulingam.P

Similar Messages

  • Error while opening Crystal report 2008

    Hi All,
    I get the following error when I try to open crystal report 2008 trial version:
    "Entry Point Not Found The procedure entry point ?CanStackDump@SLogger@CXLib400@@SA_NXZ could not be located in the dynamic link library cxlibw-4-0.dll."
    To over come this I tried to install crystal report 2008 SP1 but it didn't help,
    even I uninstalled all Crystal report setup and tried to install Crystal report 2008 server even that didn't helped.
    Kindly suggest some solution.
    Thanks
    Deep Kulshrestha

    Hi Deep,
    Try these links:
    http://boardreader.com/thread/ERROR_SvcMgr_exe_Entry_Point_Not_Found_5cb3X2r3z.html
    http://www.tek-tips.com/viewthread.cfm?qid=1505754&page=11
    I hope they will help.
    Jesper

  • ADobe Reader error while opening CRYSTAL REPORT

    i HAVE INVOKED A CRYSTAL REPORT USING A JSP , AND COULD EVEN EXPORT THAT TO A PDF FILE ,but when i try to open that particular file using the adobe reader am getting the error given below.
    Acrobat could not open MyReport[1].pdf.pdf because it is either not a
    supported file type or because the file has been corrupted (for example it
    was sent as an email attachment and wasn���t correctly decoded).
    Can anyone tell why this is happening ??

    Hi Deep,
    Try these links:
    http://boardreader.com/thread/ERROR_SvcMgr_exe_Entry_Point_Not_Found_5cb3X2r3z.html
    http://www.tek-tips.com/viewthread.cfm?qid=1505754&page=11
    I hope they will help.
    Jesper

  • Error when opening Crystal Report in VS 2010 IDE

    I recently began receiving the following error when I attempt to open a form containing the crystal reports viewer.
    An error has occurred while attempting to load the Crystal Reports runtime.  Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly.  Please install the appropriate Crystal Reports redestributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required.  Please go to http://www.businessobjects.com/support for more information.
    I am able to run the reports from within the development environment but cannot open them in the forms editor.  I have installed Crystal Reports for Visual Studio 2010 SP1 and Visual Studio 2010 SP1 hoping that would solve the problem but to no avail.  I have tried to reinstall multiple times and continue to receive the error.
    I am running on Vista (32 bit).  The project target framework is ".NET Framework 4,   The platform target is set to x86.
    I also now receive errors when I try to run reports after deploying to client PCs but I don't know if that is related or not.

    Uninstall CRVS2010 that you currently have installed.
    To remove the assemblies from the GAC use gacutil. Google will get you a number of links on how to. Also, see the KB [1535325  - How to remove CRVS2010 Beta 2|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533333335333333323335%7D.do].
    Reinstall CRVS2010 SP1 from here:
    SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads [original link is broken]
    - Ludek

  • Error when opening Crystal Reports

    Hi
    I'm getting an error when opening Crysta R. from SAP 2007. Crystal version is 2008 and the error is something like this: The title of the wirndow is: Microsoft .NET Framework. Message: Exception not controlled in application. If you click continue the applicaction will avoid the error...etc.
    Any suggestions?

    Have you installed the 1.1, 2.0 and 3.5 Framework?
    Check your C:\Windows\Microsoft.NET\Framework and verify you have them all. If not go to Microsoft's site and install them.
    Thank you
    Don

  • Infoview error when opening crystal report

    Anyone experienced this type of problem and managed to resolve it?
    Kindly assist.
    Thanks

    Sorry I did not provide all the information.
    I get the error message u201CThe database login information for this report is either incomplete or incorrect".  This is when refreshing a crystal report in Infoview.  The data source is SAP and am directly accessing the tables.  Am running IE 8 and crystal reports 2008.  I have checked security options and they look ok.

  • Error: Failed to open the connection when opening Crystal Report in CMC or

    Hello all,
    I am getting theError: Failed to open the connection when opening Crystal Report in CMC or Infoview
    with access database as the datasource which is in the network drive.

    Hi Sonali,
    This is because Crystal Reports does not recognize database connection from share drive
    1. Save the database locally on server machine
    2. Create a new database on server and link the new database with the database on Network.
    Steps to link the database.
    1.Create a new test database on server.
    2. Go to File --> Get External Data --> Link tables | Select the database on Network Drive.
    3. Select all the tables from the database.
    4. Save the Database  e.g. Test.mdb.
    5. Create an ODBC Connection on server machine, with the same name as on client machine using test.mdb database.
    Note: Click on Advanced button, enter the default user id and password for the odbc connection, it is not mandatory to give Login Name and Password, only if the user id and password are given then we need to provide the same user id and password in the CMC database configuration.
    6. Create a report using this ODBC connection, and save the report to Enterprise.
    Regards,
    Navin

  • Unable To Open Crystal Report

    Hi
    I want to open Crystal report through Java 1.5 Using JAVA Beans class.
    Data Base: My SQL, JDBC connectivity
    Class Names: CrystalRepoty(For Viewing The Report)
    Bean Class(WorkinfoDataSourceBean): For Data Base Connectivity
    When i open the perticular report its gives error.
    Error Detials
    Failed to open connection (Connection: databaseType=Java Beans Connectivity serverName=WorkinfoDataSourceBean state=closed databaseDriverName=crdb_javabeans.dll).
    com.crystaldecisions.reports.queryengine.al: Error loading ResultSet class (WorkinfoDataSourceBean)

    Hi
    I want to open Crystal report through Java 1.5 Using JAVA Beans class.
    Data Base: My SQL, JDBC connectivity
    Class Names: CrystalRepoty(For Viewing The Report)
    Bean Class(WorkinfoDataSourceBean): For Data Base Connectivity
    When i open the perticular report its gives error.
    Error Detials
    Failed to open connection (Connection: databaseType=Java Beans Connectivity serverName=WorkinfoDataSourceBean state=closed databaseDriverName=crdb_javabeans.dll).
    com.crystaldecisions.reports.queryengine.al: Error loading ResultSet class (WorkinfoDataSourceBean)

  • Error While running crystal report

    Dear All,
    i have some crystal reports in SAP.while opening any crystal report its through some error like  "Error While running crystal report ".
    Kindly suggested me how to do this .
    Thanks&Regards,
    P.Pratap

    Hi All,
    Thanks for your reply,
    already i close this Issue.
    they have one addon for crysatl report .so it show error like Error while Running crystal report
    thanks&Reagrds,
    P.Pratap

  • Unablo to open Crystal report from infoview

    Hello Experts,
    I have an issue while opening crystal report from BOBJ Infoview.
    The report opens for some users and some users are getting this error.
    " Internal error. Please contact your system administrator. [RCIRAS0216]  ", the report is based on bw query and the users has access to this query,the users are able to execute other report based on same query.
    Even some users who are administrator group members are getting this error.
    Any help is appreciated.
    Thanks
    Kish

    It happens to only one report,but when i changed the option to "Use same database logon when report is run" in CMC, it resolved the issue.
    But i was wondering why the report encountered this error for the same user for whom it was working good in the past.
    Thanks,
    Sai

  • Error while opening a report in FRstudio client machine.

    Hi,I'm getting below error while opening a report in FRstudio client machine. please help me if any of you resolved this issue earlier.
    client laptop: 64bit windows7
    hyperion version: 11.1.2.2
    error msg:
    "HARSnapin Initialize() Error -2147467259 - ; nested exception is:
         java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
         java.io.InvalidClassException: com.hyperion.reporting.graphics.GridObject; local class incompatible: stream classdesc serialVersionUID = 5432192847655595077, local class serialVersionUID = -5245705824007679661"
    thanks

    I've seen umarshalling error when there is a difference between the client and server version. Is there a patch applied? I would recommend to uninstall the existing one and install if from Workspace. (this will ensure that you've the correct client version)
    Regards
    Celvin
    http://www.orahyplabs.com

  • Error while executing Crystal report in client computers

    I got this error message -2147206460 Crystal Reports Activex Designer invalid directory. any idea guys how can i fix this. I tried using Crystal Report viewer in the server and its working perfectly.
    thanks

    Michael Litiatco 
    is your report working on SAP from server machine or it only works on Crystal Report on server machine
    IF your report is working  on SAP server then, the problem is on sharing the .rpt file with client
    Place the .rpt file in shared folder whichi is accessable from all the clients then use that .rpt file in SAP CR addon and update it
    updating the path from each client system SAP towards shared .rpt file
    do you have any firewall installed, try disabling within your network and check
    This should Fix your problem
    make sure the printer is shared and correct printer is set as default printer
    if possible give a test print page from client to make sure the printer is online
    Regards
    Krish

  • Error when running crystal report

    i saw the error in log file 'Only TrueType fonts are supported. This is not a TrueType font' and 'Error while running Crystal report'
    Help me to fix this problem.Thanks inadvanced.
    I used some software developed in vb6.It changed some system font when running :D.
    i want to run both that soft   and sap.

    Hi,
    Please refer to the link, [Re: CR XI R2, Crystal Report Viewer Opentype Font not supported|Re: CR XI R2, Crystal Report Viewer Opentype Font not supported].
    What is the version of your crystal report, we will try to apply some service packs.
    Regards,
    Clint

  • How to open Crystal Report from the SAP GUI ?

    Hi experts,
        We have developed some reports for our ECC 6.0 system by using Crystal Report 2008 and SAP integration kit , these reports are published to BO edge 3.1 server.  To view the report, our user have to open IE and login Infoview first.
       For convenience, we want to open Crystal report from SAPGUI directly without login BOE, How can we do it? 
    Thanks.

    Hi
    please take a look here
    Crystal Reports
    Regards,
    STratos

  • Error in publishing crystal report

    In /crystal/rptadmin I am getting this error when publishing crystal reports
    <report name> [<technical name>]
    0000000004 Item 1 was not found in the collection.
    Has anyone experienced the same error before?

    Hello Donna,
    in this case I recommend to post to the [dedicated SAP Integration Kit|BusinessObjects Integration Kits; forum.
    That forum is monitored by qualified technicians and you will get a faster response there.
    Also, all SAP queries remain in one place and thus can be easily searched in one place.
    Best regards
    Falk

Maybe you are looking for

  • "From" presence not displaying in Outlook 2010

    I've been working on a software product aiming presence and im integration with Microsoft Outlook using IMessenger API. Integration works as expected with Outlook 2013. However, the presence indicator of the "from" or sender does not display in Outlo

  • Input Help (F4) does not work for Planning Functions in Web

    Hi Gurus, I am working in BI-Integrated Planning. When I execute a planning function from web layout (through Web Application Designer), the "Input Help" does not work. When I give F4 it takes me to the initial planning layout screen from the plannin

  • Not logging in?

    After I enter my @mac info in preferences of ichat nothing happens. Everything in the buddy menu is greyed out. I tried a test message to tryichatav, but I get an error saying "could not send instant message to tryichatav" . If I go back to my prefer

  • IPad tv out problem

    I recently brought a pad 3 I want to connect to a projector or tv . I also brought he correct apple to RCA leads . Problem being I can only get sound no pictures I have been told that hese leads only work with iPad 1&2 is this correct. If so how do y

  • Packing list number & packing list date

    Hi All, We need to generate a report that details the amount of product shipped from a manufacturing plant. I need the details like from where do we need to fetch the packing list number & packing list date. Like the field & table names. Pelase sugge