Script Error report when trying to "Find Album Info" for music in Windows Media Player

When I click on "Find Album Info" in Windows Media Player, it finds the correct media info. But when I click "Finish" after verifying everything is correct, it says "An error has occurred on this script page" and asks if I want to continue. I click
yes, it goes back to the last page of finding album info, I again click "Finish" to find the same "Script error" page?

Sir, that means the Windows Firewall Blocked the Script So try these steps hope it works for you :
1.) - Open the "Start Menu".
2.) - Go to the "Control Panel".
3.) - Double click "Security Center".
4.) - Click "Windows Firewall" in the top left.
5.) - Click "Change settings".
6.) - Click "Continue".
7.) - Click the "Exceptions" tab.
8.) - Scroll down and check all of the "Windows Media Player" options.
Regards,
MCP | MCTS | MCITP

Similar Messages

I'm getting error 205 when trying to install ID with Creative Cloud on Windows 7. Help please.

I'm getting error 205 when trying to install ID with Creative Cloud on Windows 7. Help please.

Creative Cloud Help / Error downloading Creative Cloud applications
http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll

I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
tt2

When I transfer my music from windows media player, itunes places the music all over the place instead of in the album its suppose to be in. Why?????

WhenI transfer my music from Windows Media Player why does Itunes place the music all over the place instead of in the Album its suppose to be in? Why???

Delete and redownload them if doing so is free in your country.
(98014)

I get an error code when trying to install un update for my photosmart printer

I have a Photosmart 5520 and I updated to a windows 8.1. When trying to install an update for my printer, I get an error code saying unable to update

Hi cjrf,
Thanks for the reply with the error code. I am going to post you a document below. Let me know if this works for you and I will continue to help if need be.
Also, are you experiencing any issues with your Photosmart 5520? Are you unable to perform an action?
Error code
I hope this helps, good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Receiving error message when trying to open microsoft word for mac or any other microsoft office for mac application

I am receiving an error message when trying to open any application in the Office for mac suite
Any suggestions??

Hello
you can try - remove and re-install microsoft office
you can try boot in safe mode - hold COMANDE-S at start up until see you are insafe mode then restart normaly and see if you can open word
you can try use font book too detect font conflict / problem
you can try use office database recover / repare program as folow , first quit ALL office application then hold ALT key and launche same time entourage or outlook and and folow software optiion for verify / reconstruct database
HTH
Pierre

I am continually getting this error message when trying to up-date software for: iTunes and iPhoto:The operation couldn't be completed. (NSURLErrorDomain error -1012.)

I am continually an error message when trying to up-date iPhoto and iTunes. Does anyone have any suggestions, please?

Hello Linc. These are the logs to the last attempts at up-dating iTunes.
Sep 8 18:10:59 iMac.local Software Update[1722]: SoftwareUpdate: Scan for client pid 1722 (/Applications/App Store.app/Contents/MacOS/App Store)
Sep 8 18:11:02 iMac.local Software Update[1722]: Failed Software Update - Refusing invalid certificate from host: swscan.apple.com
Sep 8 18:11:04 --- last message repeated 1 time ---
Sep 8 18:11:04 iMac.local Software Update[1722]: SoftwareUpdate: Error encountered in scan: Error Domain=NSURLErrorDomain Code=-1012 "The operation couldn’t be completed. (NSURLErrorDomain error -1012.)" UserInfo=0x7fd9a8cfae70 {NSErrorFailingURLKey=https://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleo pard-leopard.merged-1.sucatalog, NSErrorFailingURLStringKey=https://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleo pard-leopard.merged-1.sucatalog}
Sep 8 18:11:04 iMac.local Software Update[1722]: SUAppStoreUpdateController: scan (f=0, c=1, p=1, r=1) got error The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
Sep 8 18:11:17 iMac.local Software Update[1722]: SUAppStoreUpdateController: proceed with scan based on intervening install (including Unity Web Player at 2013-07-23 17:32:38 +0000) (last scan: 2013-03-11 16:00:20 +0000)
Sep 8 18:11:17 iMac.local Software Update[1722]: SoftwareUpdate: Scan for client pid 1722 (/Applications/App Store.app/Contents/MacOS/App Store)
Sep 8 18:11:19 iMac.local Software Update[1722]: Failed Software Update - Refusing invalid certificate from host: swscan.apple.com
Sep 8 18:11:22 --- last message repeated 1 time ---
Sep 8 18:11:22 iMac.local Software Update[1722]: SoftwareUpdate: Error encountered in scan: Error Domain=NSURLErrorDomain Code=-1012 "The operation couldn’t be completed. (NSURLErrorDomain error -1012.)" UserInfo=0x7fd9a98c2090 {NSErrorFailingURLKey=https://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleo pard-leopard.merged-1.sucatalog, NSErrorFailingURLStringKey=https://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleo pard-leopard.merged-1.sucatalog}
Sep 8 18:11:22 iMac.local Software Update[1722]: SUAppStoreUpdateController: scan (f=0, c=1, p=1, r=1) got error The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
Sep 8 18:11:39 iMac.local installd[1728]: installd: Exiting.
Sep 8 18:14:15 iMac.local Software Update[1751]: SUAppStoreUpdateController: found in cache: <none>
Sep 8 18:14:16 iMac.local installd[1757]: installd: Starting
Sep 8 18:14:16 iMac.local installd[1757]: installd: uid=0, euid=0
Sep 8 18:14:16 iMac.local Software Update[1751]: SUAppStoreUpdateController: proceed with scan based on intervening install (including Unity Web Player at 2013-07-23 17:32:38 +0000) (last scan: 2013-03-11 16:00:20 +0000)
Sep 8 18:14:16 iMac.local Software Update[1751]: SoftwareUpdate: Scan for client pid 1751 (/Applications/App Store.app/Contents/MacOS/App Store)
Sep 8 18:14:19 iMac.local Software Update[1751]: Failed Software Update - Refusing invalid certificate from host: swscan.apple.com
Sep 8 18:14:21 --- last message repeated 1 time ---
Sep 8 18:14:21 iMac.local Software Update[1751]: SoftwareUpdate: Error encountered in scan: Error Domain=NSURLErrorDomain Code=-1012 "The operation couldn’t be completed. (NSURLErrorDomain error -1012.)" UserInfo=0x7f9391840bf0 {NSErrorFailingURLKey=https://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleo pard-leopard.merged-1.sucatalog, NSErrorFailingURLStringKey=https://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleo pard-leopard.merged-1.sucatalog}
Sep 8 18:14:22 iMac.local Software Update[1751]: SUAppStoreUpdateController: scan (f=0, c=1, p=1, r=1) got error The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
Sep 8 18:14:22 iMac.local Software Update[1751]: SUAppStoreUpdateController: proceed with scan based on intervening install (including Unity Web Player at 2013-07-23 17:32:38 +0000) (last scan: 2013-03-11 16:00:20 +0000)
Sep 8 18:14:22 iMac.local Software Update[1751]: SoftwareUpdate: Scan for client pid 1751 (/Applications/App Store.app/Contents/MacOS/App Store)
Sep 8 18:14:25 iMac.local Software Update[1751]: Failed Software Update - Refusing invalid certificate from host: swscan.apple.com
Sep 8 18:14:27 --- last message repeated 1 time ---
Sep 8 18:14:27 iMac.local Software Update[1751]: SoftwareUpdate: Error encountered in scan: Error Domain=NSURLErrorDomain Code=-1012 "The operation couldn’t be completed. (NSURLErrorDomain error -1012.)" UserInfo=0x7f93904b5c00 {NSErrorFailingURLKey=https://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleo pard-leopard.merged-1.sucatalog, NSErrorFailingURLStringKey=https://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleo pard-leopard.merged-1.sucatalog}
Sep 8 18:14:27 iMac.local Software Update[1751]: SUAppStoreUpdateController: scan (f=0, c=1, p=1, r=1) got error The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
Sep 8 18:14:36 iMac.local Software Update[1751]: SUAppStoreUpdateController: proceed with scan based on intervening install (including Unity Web Player at 2013-07-23 17:32:38 +0000) (last scan: 2013-03-11 16:00:20 +0000)
Sep 8 18:14:36 iMac.local Software Update[1751]: SoftwareUpdate: Scan for client pid 1751 (/Applications/App Store.app/Contents/MacOS/App Store)
Sep 8 18:14:38 iMac.local Software Update[1751]: Failed Software Update - Refusing invalid certificate from host: swscan.apple.com
Sep 8 18:14:41 --- last message repeated 1 time ---
Sep 8 18:14:41 iMac.local Software Update[1751]: SoftwareUpdate: Error encountered in scan: Error Domain=NSURLErrorDomain Code=-1012 "The operation couldn’t be completed. (NSURLErrorDomain error -1012.)" UserInfo=0x7f93904b7340 {NSErrorFailingURLKey=https://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleo pard-leopard.merged-1.sucatalog, NSErrorFailingURLStringKey=https://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleo pard-leopard.merged-1.sucatalog}
Sep 8 18:14:41 iMac.local Software Update[1751]: SUAppStoreUpdateController: scan (f=0, c=1, p=1, r=1) got error The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
Many thanks.
Cropper100.

How to move albums that were saved using windows media player

I have a number of albums that are saved on my computer using windows media player. These were saved before I got itunes. I tried moving some of the albums into itunes but they don't show in tunes. Is there a way to do this rather than read all of the cd's into itunes.
Thank you

Sure thing.
In iTunes, go to File -> Add Folder to Library or Add File to Library. Select the folder which contains your music, or select individual tracks.
If in your iTunes settings you have iTunes copy music to it's folder and manage it for you, will then make a copy of the music, and put it into the iTunes location for music. It will even convert WMA files for you, into whatever file format you have under Import Settings in your iTunes preferences.
If in your preferences, itunes does NOT make a copy of your media, then it will simply reference the location it is in currently. If this is the case, then do not move the location of the songs from WMP. However, by default iTunes does make a copy into it's own directory, and if this is the case, you can actually delete the older files, as now you have a copy of these files in your iTunes directory.
Does this make sense?

When I put the audio CDs I burned through Windows Media Player into my drive, it says disk is blank.

I am using a Presario CQ61. I have burned audio CDs with Windows Media Player on my computer. Upon completion, when I try to playback the CD in my disk drive for the computer, it asks what I would like to do with the blank disk. However, this same CD plays just fine in my stereo, as well as on my roommates Presario CQ61 disk drive. We have the exact same computer except mine has a webcam and hers doesn't. I don't understand why these disks will play everywhere except on the computer that was used to create the disk! I am so frustrated! I have updated my drivers. I have also disabled and re-enabled the Windows Media Player. I even went as far as restoring my computer to factory settings. What else can I do to fix this problem??

Which brand of discs u used??\
tried any other brand??
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||

Getting a microsoft error report when trying to run Quicktime

I have dell laptop which has windows XP. I was not able to run Itunes because I got an error that said that microsoft has encountered an error and i choose to send an error report or not. so i uninstalled and reinstalled itunes and quicktime with no avail. After going these forums, I uninstalled itunes and only installed the quicktime standalone player and i get the same error which tells me the problem is with quicktime. I tried all the stuff on the forum but cannot get quicktime to work which then means I cant get itunes to work which totally *****! any ideas? I wish Apple had a phone/chat support like dell.

I am also having this issue with a new Dell laptop which runs Windows XP tablet edition. I have tried installing QT 7.5.5 twice, and even installing an older version (7.1.6). Every time I try to open QT I get a brief error message on the screen after which it crashes and restarts the system....very frustrating....

Error report when trying to start Photoshop Elements 11

Hello.
I bought the student version of Photoshop Elements 11 and Premiere Elements 11 recently. Premiere Elements works fine, but since 6 weeks, I keep getting an error report, whenever I want to start Photoshop Elements.
"Photoshop Elements cannot start or continue because of missing file(s). Please reinstall."
I tried deinstalling and reinstalling the programme for five times already, but I still get the error report.
Please, could somebody help me, because I'm getting really desperate now and I don't know what to do.
Best Regards,
Sophie Grossalber
P.S.: I have a laptop, that runs with Windows 7.

Sophie can you please check your installation logs to see if an error occurs during the installation process. Please see Troubleshoot install using logs | Elements - http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html for information on how to locate and interpret the installation log files. You are welcome to post any specific errors which you receive to this discussion.

Apache Tomcat error report when trying to link to websites from Talk Talk webmail

Using Talk Talk webmail, can't access web links from there, but get error report. Status 404. Apache Tomcat 5.5.27.

Unfortunately cannot read rest of forum, due to an error on your page, but presume others have had this problem, both on IE and Mozilla. I only had a result by forwarding the offending email and its ("greyed out Apache Tomcat") attachment to my other email address (Hotmail) and was able to read it there.
Just WHAT is going on with TalkTalk???

Error -6753 when trying to find my base station

I'm working off a Dell computer with a wireless card in it, and it can't find my Airport Extreme Base Station. I've tried going to "File" and selecting Configure Other..., but when I put in the IP address and the password for the base station it gives me the Error -6753.
What is this error and how do I get my PC to recognize my wireless base station? It's been configured on my mac and to all appearances it's working perfectly, but I just can't get the PC to connect to it wirelessly. HELP!

Some additional information:
The desktop currently "running" the airport express is a Mac Intel Mini and it's hard-wired into the base station so it's not having any issues connecting (wirelessly at least).
The Dell is approximately 4-5 years old, running Windows XP SP2 and the Airport Utility loaded straight from the disk that came with the Airport Extreme. The Dell is using a 2Wire wireless card that previously had no problems on two Linksys and 2Wire Homeportal wireless systems that were set up in my house and where I worked. The Mac Mini also worked on the 2Wire home system previously.
I can get the mac mini to find the base station and the wireless network created by it (using WPA/WPA2) and connects perfectly fine. Neither the Dell's network connections nor the airport utility on the Dell are finding the base station's network, and no amount of rescanning finds it. The base station is working fine to all appearances.
I'm going to try downloading the Utility from the Apple website today at school but that's not going to help me until I get home at 5pm. Help!

Driver errors reported when trying to start objects

We have a standard PCI can card, and are developing in the following environment:
Software written in VC++ Version6,
running under NT4.0,
Port configured as 'CAN0',
using extended arbitration IDs.
We create one network interface object, and, depending on the test configuration, four CAN response objects.
The problems are :-
1) if the network interface object (nio) is configured as 'start on open'= TRUE then the other objects fail to initialise. If the other objects aren't started, the nio works perfectly though.
2) If the nio is configured not to start on open, the other objects will initialise successfully (obviously not a lot of use though).
Any attempt to call ncAction trying to start any of the objects will however fail with a status of 0xBFF62002, which is CanErrDriver.
Below is a stripped down set of events as to how we start our card.
AttrIdList[0] = NC_ATTR_BAUD_RATE;
AttrValueList[0] = 125000; //BaudRate;
AttrIdList[1] = NC_ATTR_START_ON_OPEN;
if( Response_Enabled == 0 )
AttrValueList[1] = NC_TRUE;
NotificationStates = (NC_ST_READ_AVAIL |
NC_ST_ERROR | NC_ST_WARNING | NC_ST_STOPPED);
else
AttrValueList[1] = NC_FALSE;
// don't look for stopped state else it
// will interrupt continuously.
NotificationStates =
(NC_ST_READ_AVAIL | NC_ST_ERROR |
NC_ST_WARNING);
AttrIdList[2] = NC_ATTR_READ_Q_LEN;
AttrValueList[2] = 50; //500;
AttrIdList[3] = NC_ATTR_WRITE_Q_LEN;
AttrValueList[3] = 20;
AttrIdList[4] = NC_ATTR_CAN_COMP_STD;
AttrValueList[4] = 0;
AttrIdList[5] = NC_ATTR_CAN_MASK_STD;
AttrValueList[5] = 0; // NC_CAN_MASK_STD_DONTCARE;
AttrIdList[6] = NC_ATTR_CAN_COMP_XTD;
AttrValueList[6] = 0;
AttrIdList[7] = NC_ATTR_CAN_MASK_XTD;
AttrValueList[7] = 0; // NC_CAN_MASK_XTD_DONTCARE;
// Configure the CAN Network Interface Object
Status = ncConfig(szCanObject, 8, AttrIdList,
AttrValueList);
CheckStatus(Status, "ncConfig");
CCanObject* pCanObject = new CCanObject;
pCanObject->m_phObject = new (NCTYPE_OBJH);
ASSERT (pCanObject->m_phObject != NULL);
Status = ncOpenObject(szCanObject,
pCanObject->m_phObject);
CheckStatus(Status, "ncOpenObject");
if (Status == 0) // object was
// successfully created
// add the CAN object to the list,
// indexed by name
m_CanObjectMap.SetAt(strObjectName,
pCanObject);
// create a string to identify the Notification
pCanObject->m_pszObjectName = new char[strObjectName.GetLength() + 1];
strcpy(pCanObject->m_pszObjectName, strObjectName);
// Create the notification used to store incoming frames.
// CanCallback will be called whenever a frame is available,
// a background error occurs, or no frame is received for 30 seconds.
// We pass a pointer to the global Queue data structure to the
// callback's RefData parameter.
Status = ncCreateNotification(
*(pCanObject->m_phObject),
NotificationStates,
NC_DURATION_INFINITE, //CAN_TIMEOUT
pCanObject->m_pszObjectName,
CanCallback); // name of callback fn
// check callback was installed
CheckStatus(Status, "ncCreateNotification");
at this point we kick off a timer for 200 msecs, and then carry on when the timer expires.
This allows the card to get itself settled.
This consists of checking configuration, and doing the following code for each of the response objects.
The things that change are the object names, the arbitration IDs, and the response data.
AttrIdList[0] = NC_ATTR_COMM_TYPE;
AttrValueList[0] = NC_CAN_COMM_TX_RESP_ONLY;
//failed bff62002 if objects set to 'start on open'
// All of the following are here as a result of testing.
// The setting above is the one that should eventually be used.
// Finally resolved by not using start-on-open above.
// AttrValueList[0] = NC_CAN_COMM_RX_UNSOL; //worked
// AttrValueList[0] = NC_CAN_COMM_RX_PERIODIC; //failed bff62005
// AttrValueList[0] = NC_CAN_COMM_RX_BY_CALL; //worked
/// AttrValueList[0] = NC_CAN_COMM_TX_PERIODIC; //worked - crashed with unhandled exception on closure though
// AttrValueList[0] = NC_CAN_COMM_TX_BY_CALL; //worked
// AttrValueList[0] = NC_CAN_COMM_TX_WAVEFORM; //worked - crashed with unhandled exception on closure though
// Specify watchdog timer period
AttrIdList[1] = NC_ATTR_BKD_PERIOD;
AttrValueList[1] = 1000;
// respond with DLC
AttrIdList[2] = NC_ATTR_BKD_READ_SIZE;
AttrValueList[2] = 0;
AttrIdList[3] = NC_ATTR_BKD_WRITE_SIZE;
AttrValueList[3] = DataLengthCode; // normally 3
AttrIdList[4] = NC_ATTR_CAN_TX_RESPONSE;
AttrValueList[4] = NC_TRUE;
/* This attribute is ignored for CAN Objects which transmit data. */
AttrIdList[5] = NC_ATTR_RX_CHANGES_ONLY;
AttrValueList[5] = NC_TRUE;
// maximum number of frames to hold in read queue
AttrIdList[6] = NC_ATTR_READ_Q_LEN;
AttrValueList[6] = 0;
// The write queue length is set to zero (queuing disabled).
// This means that for each request, the most recent data written
// using ncWrite will be transmitted in a Data Frame.
AttrIdList[7] = NC_ATTR_WRITE_Q_LEN;
AttrValueList[7] = 0;
// build the CAN object name
sprintf(szCanName, "%s::XTD0x%08lx", CanBus, ArbitrationId );
//*arbitration IDs normally used are
//*0x19008000,
//*0x19008001,
//*0x19008002
// configure the CAN object
Status = ncConfig(szCanName, ATTR_LIST_LEN, AttrIdList, AttrValueList);
// check for errors
CheckStatus(Status, szTemp);
// Open the transmitting CAN Object. The object starts up, but it
// will wait for the first call to ncWrite before it transmits a Data
// Frame.
CCanObject* pCanObject = new CCanObject;
pCanObject->m_phObject = new (NCTYPE_OBJH);
ASSERT (pCanObject->m_phObject != NULL);
Status = ncOpenObject(szCanName,
pCanObject->m_phObject);
CheckStatus(Status, szTemp);
if (Status == 0) // CAN object created successfully
// Store CAN bus information into object
pCanObject->m_strCanBusName = CanBus;
pCanObject->m_strCanName.Format("%s", szCanName);
pCanObject->m_ArbitrationID = ArbitrationId;
// add the CAN object to the list, indexed by name
// put data into output buffer
for (int i = 0; i < DataLengthCode; i++)
Transmit.Data[i] = DefaultData[i];
// setup CAN object output buffer
Status= ncWrite(*(pCanObject->m_phObject),
sizeof(Transmit), &Transmit);
CheckStatus(Status, "ncWrite");
// create a string to identify the Notification
pCanObject->m_pszObjectName = new char
[strObjectName.GetLength() + 1];
strcpy(pCanObject->m_pszObjectName,
strObjectName);
Status = ncCreateNotification(
*(pCanObject->m_phObject),
NC_ST_WRITE_SUCCESS,
NC_DURATION_INFINITE,
pCanObject->m_pszObjectName,
NotificationCallback);
// check callback was installed
CheckStatus(Status, "ncCreateNotification");
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
So, Any ideas what we're doing wrong ??
The cards were new in December 2001.
Software driver version installed is Version 1.5.1
It makes little difference which card we use, as we have many cards at this site in various pieces of test equipment, and I have tried at least 6 !
Things are beginning to get a little depserate here =:-/
Regards,
John Webster.

Many thanks for the prompt reponse Diego.
A couple of comments on what you have written above.
The Response objects are only used for the 4 messages that need responses. All other messages are handled (received) by the Network Interface Object. Is it still therefore true to say that I should be using NC_CAN_ARBID_NONE ?
I think the answer will be yes, but want to confirm.
Am I correct to say that from your description, the only change was as belows :-
AttrValueList[2] = 0;
AttrValueList[3] = 0;
AttrValueList[6] = NC_CAN_ARBID_NONE;
Should I also be setting NC_ATTR_CAN_COMP_STD to NC_CAN_ARBID_NONE too ?
Many thanks for your help. This one has been causing us a lot of problems for a long time. I have changed many of the pa
rameters, but must admit I don't think I tried that one before.
Just off now to try this, see if it makes our code work !
Regards,
John.

Receiving 'Unknown Error (-609)' when trying to download album artwork.

Hey all. The subject line says it all. When importing tracks from CD or other sources into iTunes, I get Unknown Error (-609) every time. My connection works, and I've only had this problem since updating to the latest version. The last time I had this issue, I updated and everything was fine but I can't update to a later version now.
Does anyone know how to get rid of this issue?

And before it gets suggested, I know full well I can use my internet browser to get artwork and copy/paste it that way. But as I'm in the middle of a stack of roughly 40 discs that I'm uploading, I have no desire to search out all of those album covers if it can be avoided.

Script Error report when trying to "Find Album Info" for music in Windows Media Player

Similar Messages

Maybe you are looking for