Script for To and CC Email
Hi
I have a pdf form that has a number of fields in it that generates an email when the submit button is clicked. This is working fine and addresses the email generated correctly based on the following script..
this.mailDoc({
cTo: getField("Executive_Director").value,
cCc: getField("Authorising_Manager").value + (";")+ getField("Current_Manager").value + (";")+ getField("Proposed_Manager").value +(";") + getField("Proposed_Executive_Manager").value,
cSubject: " Approval Required "
cMsg:" Blah blah
I would like to make one improvement to accommodate a scenario where the manager could be either one, two or all of the roles in the script above.
Based on the script above if the Current_Manager was Bob Smith, the Proposed_Manager was Bob Smith
the cc: would be Bob Smith,Bob Smith
it does make any sense to address the email with the same person more than once
I would like some script to identify if there are multiple values that are the same to only present that name once in either the To field or CC field in the email
Thanks in advance for the assistance
Michael
Hi,
Ive inserted the code as follows however when I click OK to close the java script editor it highlights the var ccAddresses = []; and doesn't allow me to close
this.mailDoc({
var ccAddresses = [];
ccAddresses.push(this.getField("Authorising_Manager").value);
var currentManager = this.getField("Current_Manager").value;
if (ccAddresses.indexOf(currentManager)==-1) ccAddresses.push(currentManager);
var proposedManager = this.getField("Proposed_Manager").value;
if (ccAddresses.indexOf(proposedManager)==-1) ccAddresses.push(proposedManager);
var ccString = ccAddresses.join(";");
cTo: getField("Executive_Director").value,
cCc: getField("Authorising_Manager").value + (";")+ getField("Current_Manager").value + (";")+ getField("Proposed_Manager").value +(";") + getField("Proposed_Executive_Manager").value ,
cSubject: "Approval Required "
cMsg: "blah blah
Similar Messages
-
Shell Script for Startup and Shutdown the database
Hi,
i want Shell Script for Startup and Shutdown the database in Solaries.
could any one can hep me where i can get this script. or send to me to [email protected]
Thanks & Regards,
Gangi reddySHUTDOWN
SHUTDOWN ABORT]
Shuts down a currently running Oracle instance, optionally closing and dismounting a database.
Terms
Refer to the following list for a description of each term or clause:
ABORT
Proceeds with the fastest possible shutdown of the database without waiting for calls to complete or users to disconnect.
Uncommitted transactions are not rolled back. Client SQL statements currently being processed are terminated. All users currently connected to the database are implicitly disconnected and the next database startup will require instance recovery.
You must use this option if a background process terminates abnormally.
IMMEDIATE
Does not wait for current calls to complete or users to disconnect from the database.
Further connects are prohibited. The database is closed and dismounted. The instance is shutdown and no instance recovery is required on the next database startup.
NORMAL
NORMAL is the default option which waits for users to disconnect from the database.
Further connects are prohibited. The database is closed and dismounted. The instance is shutdown and no instance recovery is required on the next database startup.
TRANSACTIONAL [LOCAL]
Performs a planned shutdown of an instance while allowing active transactions to complete first. It prevents clients from losing work without requiring all users to log off.
No client can start a new transaction on this instance. Attempting to start a new transaction results in disconnection. After completion of all transactions, any client still connected to the instance is disconnected. Now the instance shuts down just as it would if a SHUTDOWN IMMEDIATE statement was submitted. The next startup of the database will not require any instance recovery procedures.
The LOCAL mode specifies a transactional shutdown on the local instance only, so that it only waits on local transactions to complete, not all transactions. This is useful, for example, for scheduled outage maintenance.
Usage
SHUTDOWN with no arguments is equivalent to SHUTDOWN NORMAL.
You must be connected to a database as SYSOPER, or SYSDBA. You cannot connect via a multi-threaded server. For more information about connecting to a database, see the CONNECT command earlier in this chapter.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a90842/ch13.htm#1013607
Joel Pérez -
Need steps to create ant scripts for publishing and deploying projects.
Need steps to create ant scripts for publishing and deploying projects.
Have got ant, Oracle BPM Enterprise WL edition installed , Need to know what are the other configurations to be done.
Any working example would help me to understand, please do mail me at [email protected]
Thanks in advance.
-SreeSreekant,
Please find the build file to publish and deploy.
<project name="deployProject"
xmlns:fuego="antlib:fuego.tools.ant.enterprise"
xmlns:fuego.j2ee="antlib:fuego.tools.ant.j2ee" default = "publish">
<property file="./Properties/fuego_deploy.properties"/>
<fuego:passport id="fuego.passport"
directoryid="${fuego.directoryid}"
preset="engine" />
<target name="publish" description="Publish and deploy processes" depends = "takeInputs">
<!-- Open a session to the Oracle BPM directory -->
<fuego:session
passportref="fuego.passport"
verbose="true"
properties="${fuego.basedir}/conf/directory.xml"
haltonerror="true" >
<!-- Publish processes -->
<fuego:publish fpr="${fuego.project.name}"
deploy="true"
engine="${fuego.engineName}"
importdata = "${fuego.importdata}"
automaproles="${fuego.automaproles}"
automapbuspars = "${fuego.automapbuspars}"
automapvars="${fuego.automapvars}"
automapconfigs = "${fuego.automapconfigs}">
</fuego:publish>
</fuego:session>
</target>
<target name= "takeInputs" >
<input
message="Please enter admin-username:"
addproperty="fuego.participant"
/>
<input
message="Please enter admin-password:"
addproperty="fuego.password"
>
</input>
</target>
</project>
and find the properties I have used..
fuego.basedir=C:\OraBPMEnterpriseHome
fuego.directoryid=default
fuego.engineName = bpmengine
fuego.project.name = E:/antExamples/Project/CommonUtilities
# If the below property is true then ant script imports data from the project, as defined in Studio.
# This includes importing:
# •Holiday and Calendar rules
# •Organizational Units
# •Roles
# •Resource configurations
# •External Variables
fuego.importdata = true
#If the below property is true ant script automatically map abstract roles to real ones with the same name.
fuego.automaproles=true
#If the below property is true ant script automatically map business parameter variable names (as defined in the project design) to an business parameter variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapbuspars = true
#If the below property is true ant script automatically map external variable names (as defined in the project design) to an external variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapvars=true
#If the below property is true ant script automatically map External Resources configurations (as defined in the project design) to real Configurations with the same name (as defined in the Fuego Enterprise directory).
fuego.automapconfigs = true -
Need training material / test scripts for MRP and Supply Chain module. Can anyone hel
Can anyone out there provide me with sample test scripts they may have used for upgrading to Oracle Financials 11i? Need sample scripts for MRP and Supply Chain management. Looking for good test scenarios for testing these modules. Appreciate any help. Email at [email protected]
Can anyone out there provide me with sample test scripts they may have used for upgrading to Oracle 11i? Need sample scripts for MRP and Supply Chain management. Looking for good test scenarios for testing these modules. Appreciate any help. Email at [email protected]
-
Can I have separate password for appstore and icloud email account?
Can I have other password for appstore and icloud email account? Me and my girlfriend have iphones and i would like to share my apps with her, but i dont want to give her possibility to acces my email account....
Well you can only have a different password if you are going to use a different Apple ID
-
Is anyone else having email problems such as apps exiting in the middle of an email? It may be a wireless issue. I use First Class for work and yahoo email for personal. I will be in the middle of typing a long email and the app just quits, all data lost.
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off" -
I ask if the ring tone notification for messages and/or email would ring to the Bluetooth. I was told they would.
Is there an solution?Did you mean that you're getting tone for Messages/email in your H700C bluetooth headset? I Blackberry use HS-655+ Wireless Headset which don't give me such prompts through my headset.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit -
Mozilla shows NOT RESPONDING until it loads the pages completely, for FACEBOOK and checking EMAILS on yahoo and google.
You can't do anything, you should just wait.I'm getting a similar error over here. Sporadically some sites won't load specifically in Safari; they open just fine in Opera, Firefox and Camino though. This is really annoying.
It's pretty clear it's nothing network related… -
My font size for typing and receiving emails is stuck in large and I can not reset it using, settings, mail, font size buttons.
Jim, where were you when i asked the same question a couple of months ago?! After updating software two months ago my email font was stuck in large and couldn't get it to change. posted issue on forum, called apple support, went to genius bar, went to 1 to 1 and NO ONE could figure it out. Your solution is right on. You the man Jim!
-
Shell script for moving and renaming files
I'm not so familiar with shell scripts. I have created some simple scripts for various tasks but now I hit something I can't handle myself.
My server receives every night a logfile from another server. This file I need to rename and move to another location. Problem is that a simple mv with new filename isn't enough, I need to insert date in filename. Format for date should be ddmmyy. Also the name of incoming file changes every night. The output always starts with same letters, let's say "log", and the date is used to identify files.
For example I receive a file /Input/filename.log and I need to move the file to the folder /Output with name log130308.txt.
Any tips how to insert the date as part of of filename while renaming or moving the file? I prefer shell script as I'll use launchd for scheduling the script.Hi again,
so far I've constructed this:
cd /input
for file in `ls *log`
do
echo "Copying " $file
cp $file /output/log.$file.`date +%d%m%y`
done
Quite there. I'm cding to directory, i'll focus later how to set some environmental parameters.
Problem with zipping is that I don't know exact logfiles names. Each day there's a new name. So zip -q filename.zip filename.log isn't quite enough and it's impossible to use wildcards. The switch -q and checksums were welcome suggestions.
Thanks again,
Juha
Message was edited by: J.Otava -
[SOLVED] advanced shell script for mount and unmount samba share
Good morning guys,
Today I've a very long question....
Hope in your help....:
I usually move from different network.
For one of those I need to mount some share that are under an ActiveDirectory server.
To do that I use samba.
Especially I've made and use the below shell script.
I know that it's so stupid but I'm a very newbie:
#!/bin/sh
echo "This is a custom script for mount my citrix share"
echo "Please insert user password (must a sudoer user)"
echo " "
sudo mount -t cifs -o username='myusername',password='mypassword' //host_ip/TsHome$/myusername /home/myuser/samba_share/TsHOME
sudo mount -t cifs -o username='myusername',password='mypassword' "//host_ip/direction" /home/myuser/samba_share/direction
echo " "
read -p "Press ENTER key to close this terminal"
exit
As I say the script work but it's so crude...!
I want/need to implement it whit the follow addictions:
1. print a feedback on mount: somenthing like "TsHOME is now mounted" or "unable to mount TsHOME"
2. check if the share are already mounted: to prevent accidentally multiple mount. If a share is already mounted I want to print something like "TsHOME is already mounted on /home/myuser/samba_share/TsHOME"
3. ask for share password (now it's in clear on script) - This is optinal
4. un-mount the share before reboot or shutdown command. That because I've notice that If i reboot or shutdown without manually un-mount the share the step of unmounting network file system became very slow
If it's no extremely difficult, can someone help me to write this script?
I know that man exist but I'm not a programmer and it's so difficult for me approch it.
Thank you in advance.
Ale
Last edited by Alexbit (2010-09-23 21:29:13)Thank you very (VERY) much!
I've follow your information and.. it work!
If can be usefull to other this is the complete script:
#!/bin/sh
echo "This is a custom script for mount citrix share"
echo "****************************************"
echo " "
echo "Please insert domain password:"
read -s mypassword
echo " "
echo "|checking mount state...in share are not mounted mount it!|"
echo "+-------------------------------------------------------------------------+"
if grep "TsHome" /etc/mtab &>/dev/null; then
grep "TsHome" /etc/mtab | awk '{print "TsHome is already mounted on " $2}'
else
sudo mount -t cifs -o username='yourusername',password="$mypassword" //ipaddress/TsHome$ /home/Samba_share/TsHOME && echo "TsHOME is now mounted" || echo "unable to mount TsHOME"
fi
echo " "
if grep "direction" /etc/mtab &>/dev/null; then
grep "direction" /etc/mtab | awk '{print "direction is already mounted on " $2}'
else
sudo mount -t cifs -o username='yourusername',password="$mypassword" '//ipaddress/direction' /home/Samba_share/direction' && echo "direction pat is now mounted" || echo "unable to mount direction"
fi
echo " "
if grep "Area" /etc/mtab &>/dev/null; then
grep "Area" /etc/mtab | awk '{print "Area is already mounted on " $2}'
else
sudo mount -t cifs -o username='yourusername',password="$mypassword" '//ipaddress/Area' /home/Samba_share/Area && echo "Area is now mounted" || echo "unable to mount Area"
fi
echo " "
echo "All DONE!"
echo " "
read -p "Press ENTER key to close this terminal"
exit
I don't really well understand what I've to put in rc.local.shutdown....
I think somethings like:
#!/bin/bash
# /etc/rc.local.shutdown: Local shutdown script.
echo "This is a custom script for UN-mount citrix share"
echo "********************************************"
echo " "
echo "|check mount state: if mount then un-mount!|"
echo "+-------------------------------------------------------+"
echo " "
if grep "TsHome" /etc/mtab &>/dev/null; then
grep "TsHome" /etc/mtab | awk '{print "TsHome is NOT mounted -> going on..." $2}'
else
sudo umount /home/Samba_share/TsHOME && echo "TsHOME is now UN mounted" || echo "unable to UN-mount TsHOME"
fi
echo " "
if grep "direction" /etc/mtab &>/dev/null; then
grep "direction" /etc/mtab | awk '{print "direction is NOT mounted -> going on.." $2}'
else
sudo umount /home/Samba_share/direction && echo "direction is now UN mounted" || echo "unable to UN-mount direction pat"
fi
echo " "
if grep "Area" /etc/mtab &>/dev/null; then
grep "Area" /etc/mtab | awk '{print "Area is NOT mounted - Finished" $2}'
else
sudo umount /home/Samba_share/Area && echo "Area is now UN mounted" || echo "unable to UN-mount Area"
fi
echo " "
echo "going shutdown"
echo " "
sleep 5
I've try but it seems to ignore the IF statement... this is the output when ALL share are UNmounted:
$ sh /etc/rc.local.shutdown
This is a custom script for UN-mount citrix share
|check mount state: if mount then un-mount!|
+-------------------------------------------------------+
umount: /home/Samba_share/TsHOME: not mounted
unable to UN-mount TsHOME
umount: /home/Samba_share/direction: not mounted
unable to UN-mount direction
umount: /home/Samba_share/Area: not mounted
unable to UN-mount Area
going shutdown
Tomorrow I will test again when I'm at office.
Meanwhile can you check if I made a macroscopic mistakes?
Thank you again!
Last edited by Alexbit (2010-09-23 17:34:49) -
Shell script for export and import
Hi,
I want to run exp command in background since i need to export 40gb database of other database
if i won't use & my session will die.
appreciated any inputs.
i need to run this line from shell script.
/oracle/bin/exp pin@voipdbstg/pin file=voip.dmp owner=pin log=voip.log
bash-2.05$ more export.sh
#!/bin/sh
/oracle/bin/exp pin@voipdbstg/pin file=voip.dmp owner=pin log=voip.log
bash-2.05$ sh export.sh &
[10] 13352
bash-2.05$
Export: Release 8.1.7.0.0 - Production on Fri Dec 4 22:51:09 2009
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Password: pin
bash: pin: command not found
[10]+ Stopped sh export.sh
input appreciated
thanks
PrakashHi,
/oracle/bin/exp pin@voipdbstg/pin file=voip.dmp owner=pin log=voip.log
should be
/oracle/bin/exp pin/pin@voipdbstg file=voip.dmp owner=pin log=voip.log
Also for running the script is background and you should be able to log out of shell scriptthen run the command in nohup mode.
$nohup export.sh&
Regards -
Can I have separate Style Formatting for viewing and sending emails?
Hey All
I was just wondering if it was possible to have separate style settings for viewing emails sent to you and sending emails to others.
Basically I want to set up a kind of style template for all my outgoing emails but I don't necessarily want my incoming mail to be like that if you see where I am coming from.
Any help would be greatly appreciated.
Thanks
DerekThanks for that.
That would certainly be an option. However after some further investigation I came across this article which shows me exactly what I was looking for:
http://www.apple.com/pro/tips/mail_templates.html
But thanks for your help though. It is really appreciated.
Derek -
Scripts for exp and imp in linux
please give me some links for exp and imp tables peridical bactch script in oracle 10 R2 over RHEL 4.5.
user13653962 wrote:
please give me some links for exp and imp tables peridical bactch script in oracle 10 R2 over RHEL 4.5.try this.. change the same script for your environment
$ crontab -l
00 22 * * * sh /u01/db/scripts/testing_user1.sh
$ cat /u01/db/scripts/testing_user1.sh
. /home/oracle/TEST1.env
export ORACLE_SID=TEST1
export ORA_USER=dbdump
export ORA_PASSWORD=dbdump
export TNS_ALIAS=TEST1
expdp $ORA_USER/$ORA_PASSWORD@$TNS_ALIAS tables=YOUR_tables_NAMEs dumpfile=TEST_`date +'%Y-%m-%d`.dmp directory=YOUR_DUMPDIR logfile=TEST_`date +'%Y-%m-%d`.logif you need for original export change the exp command,
exp username/password tables=table_name1,table_name2,etc... file=your_file_name log=your_log_file_name -
WLST scripts for deploying and migrating OSB project required
Hi,
I need sample/reusable WLST scripts for the following requirements:
1. deploying OSB project developed on workbench to the remote server.
2. migrating OSB project from Remote Server A to Remote Server B.
I know other mechanisms to register an OSB project with the server but appreciate if some one can share the above scripts and associated documentation with me.
Regards,
CChttp://download.oracle.com/docs/cd/E13171_01/alsb/docs21/deploy/config_appx.html
http://www.oracle.com/technology/sample_code/products/osb/samples/PARAMETERIZE.zip (other samples here : http://www.oracle.com/technology/sample_code/products/osb/index.html )
Maybe you are looking for
-
Need to exchange ink bought a new printer and have old ink
Hi I recently bought a new printer the HP ENVY 7645 . My old printer C310 stopped working. I now have plenty of unused new ink I would like to exchange for new ink for my new printer. I just spoke to a customer service person and they have me a c
-
Import a csv in SSIS with the delimiter as a combination
Hi, How do we import a csv file in SSIS which has the delimiter : "~*|". Note the delimeter is a combination of one or more characters. TIA.
-
This popup happens for no apparent reason. I'll just be reading an article or checking my e-mail and it pops up all the time
-
Clear doubt on standalone IS and integrate with remote BI4
Hi IS expert, Apologize for this question from a novice user. I just want to know will the metadata manager works well for linear data and impact analysis if standalone IS is installed and not sharing the common Business Intelligence Platform with BI
-
Whenever I open a document in Microsoft Word 2004 for Mac, this message pops up: "There is not enough memory or disk space to run the converter 'EPS Import." I have checked the hard drive and 180+ GB are free. At times, the Spelling and Grammar check