Script Form print issue with output type

hello,
i have maintained a output type for a purchase organisation in MN04, VN partner keep blank , medium 1 for print out and in date time : 4
output device is 'LOCL' "print immediately" and "release after output" are active in communication.
a message type generated when i created a PO, but it is a red light, and processing log is "Error in OPEN_FORM for document xxx".
after checked, custom script from caused this issue, but how to resolve this problem?
best regards,

Hello,
The error ME142 can have different causes like missing authorizations
or a terminated connection. Please see SAP notes 397691 and 532251. This note
states that is errors occur when purchasing documents are output, If
errors occur when purchasing documents are output, the system generates
an error message in the message log of the message overview. However,
error message ME142 'Error in OPEN_FORM for document &' contains only
the information that an error occurred and not the error cause. With the
attached source code, the error cause is also displayed in the error
message.
Regards,
David

Similar Messages

PO print issue with output type

hello,
i have maintained a output type for a purchase organisation in MN04, VN partner keep blank , medium 1 for print out and in date time : 4
output device is 'LOCL' "print immediately" and "release after output" are active in communication.
a message type generated when i created a PO, but it is a red light, and processing log is "Error in OPEN_FORM for document xxx".
how to resolve this problem?
best regards,
Edited by: colin hong on Nov 11, 2010 5:25 AM

Hi,
With the help of ABAP'r, please check the Custom Scriptform...
Also chk "http://help.sap.com/saphelp_nw70/helpdata/en/d6/0dba1a494511d182b70000e829fbfe/content.htm"
1. Re: difference between open_form & Start_form (urgent)
Regards
GK.

List of script and smart forms(except TNAPR) with output type or print prog

How to find out List of SAP SCRIPT and SMART FORMS (except TNAPR)with output type or print program..I like to chk in output type WMTA whch form should use.kindly help on this

Hi
WMTA is special msg and doesn't create any print: so you can't find a sapscript or smartform to link to it.
WMTA is a message for delivery, so you can find it by NACE trx or TNAPR table (It's the same): infact here it can find only all messages of logistic modules (SD & MM).
The routine ENTRY of RLAUTA20 is called by WMTA and creates a Transfer Order (for WM, Warehouse Management, module), so if you need to create a print for that msg you need to change prg RLAUTA20,
Max

Transport.of SAP script form , printer def and device type is not enaugh

I transported the SAP script form , printer definition and device types of a thermal printer.
On original system the printout is ok but on target system not. What should I do?

Thank you for your fast answer
As the matther of fact I am technical person. I think Output type belongs to application. However the difference is visible in se71 ->Utilities->Printing test -> output device ->print preview.
As I wrote I transpored corresponding. SAP script form , printer def and device type

Smart form printing issue with LOCL printer and SAP printer

Hi,
The issues are as follows:
1. the top portion of the Invoice and PO does not print when using the SAP printer (works when using LOCL)
2. the shaded areas of the Order Confirmation and Invoice are black when printing to a SAP printer (works when using LOCL)
In an attempt to correct the printing issue is was suggested that we change the SAP printer device type from HPLJ4 to POST2. This did address the problem where the shaded areas were black but then we received reports that other reports printed "garbage". Its possible that using POST2 device type causes issues when printing to HP compatible printers.
Apparently all the testing was done using the SAP printer LOCL and not the SAP printer name and SAP spool system. LOCL uses the SAP GUI and Windows system to produce the output. Our production users at the plant site and Toledo are using SAP defined printers with the device type of HPLJ4. HPLJ4 is our standard here as OC for our printer definitions and we have HP compatible printers installed in our Toledo location and all of our remote sites. We need to be able to correctly print the Invoices, Purchase Orders, Sales Order Confirmations on our SAP printers.
What can be done to the reports to allow them to print on our HPLJ4?
Thanks,
Babu

Hi Prathap,
Check the background shading of the windows of the Smartform where you get the black boxes. If it is set something like this:
Color: White
Saturation: 100%
this can be the problem.
I know it is strange but some black and white printers cannot handle this setting. They only know one color black so the ignore the color setting and just take the saturation 100% setting.
The reason it works with local and device type SAPWIN is that the print data is created in Windows and sent to the printer as graphic.
Please change the shading for window MAIN -> tab 'Output Options' to:
Color: Black
Saturation: 0%
and this should resolve the problem.
Then create a new spool and check if the problem is resolved. See SAP Note #400050.
Regards,
Prabhu

Smart form printing issue with LOCL and SAP printer

Hi,
The issues are as follows:
1. the top portion of the Invoice and PO does not print when using the SAP printer (works when using LOCL)
2. the shaded areas of the Order Confirmation and Invoice are black when printing to a SAP printer (works when using LOCL)
In an attempt to correct the printing issue is was suggested that we change the SAP printer device type from HPLJ4 to POST2. This did address the problem where the shaded areas were black but then we received reports that other reports printed "garbage". Its possible that using POST2 device type causes issues when printing to HP compatible printers.
Apparently all the testing was done using the SAP printer LOCL and not the SAP printer name and SAP spool system. LOCL uses the SAP GUI and Windows system to produce the output. Our production users at the plant site and Toledo are using SAP defined printers with the device type of HPLJ4. HPLJ4 is our standard here as OC for our printer definitions and we have HP compatible printers installed in our Toledo location and all of our remote sites. We need to be able to correctly print the Invoices, Purchase Orders, Sales Order Confirmations on our SAP printers.
What can be done to the reports to allow them to print on our HPLJ4?
Thanks, Prathap

Hi Prathap,
Check the background shading of the windows of the Smartform where you get the black boxes. If it is set something like this:
   Color: White
   Saturation: 100%
this can be the problem.
I know it is strange but some black and white printers cannot handle this setting. They only know one color black so the ignore the color setting and just take the saturation 100% setting.
The reason it works with local and device type SAPWIN is that the print data is created in Windows and sent to the printer as graphic.
Please change the shading for window MAIN -> tab 'Output Options' to:
   Color: Black
   Saturation: 0%
and this should resolve the problem.
Then create a new spool and check if the problem is resolved. See SAP Note #400050.
Regards,
Aidan

Script Form print issue

在SAP没有安装中文支持包的前提下，SAP Script Form有可能打印出中文字符吗？如有，怎么实现？
谢谢。

HP打印机时，打印方式是frontend吗？
用EPSON时也是用同样的打印方式吗？
Frontend（F,G)是调用windows的字体，打印机内部没有装中文字体也没有关系，照样可以打印中文。
其它打印方式:L,C不会调用windows的字体，打印机内部必须要装中文字体，才能打印中文。

Script without assigning to the output type

hi
i have some doubts in scripts ple tell me
how can we execute the script without assigning the form & print program to output type in nace?

Please read [the rules|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting further.

Printing issue in smartform with output type

Hi ,
I am facing issue while I am taking print from zebra printer.
I am trying to take a print from MB90 but its not coming but its giving status 'processed' and same from the spool, in spool its showing status complete but not giving any printout.
if I m attaching my smartform with another output type which already working for another label(smartform), then its giving print.
So, what I want to know..
Its can be a problem with output type config or from basis side.
Please help.
Thanks,
Sandeep

well i have seen setting are correct but having one issue it doesnt trigger automatically I do it manually from MB90 and rest of the things are correct becaoz i have seen while debug its going correct form from driver program, when i am runniing from MB90 manually .
Thanks,
Sandeep

KE30 decimal not display in quantity column with output type object list

Hi everyone,
I already set number format "0.000" in change form screen but when I execute report with output type object list (ALV) that report don't display decimal in quantities column e.g. 0.470 displayed to 0 .
How can I set number format in output type object list on Transaction code KE30?
Thanks in advance.
Pipit

Hi,
Better to raise this issue in CO Forum. You can expect some solution.
regards

Auto adjustment of page orientation causes printing issues with documents that have a page width greater than its page height.

Hi,
Since an upgrade from Word 2003 to Word 2010, we are experiencing printing issues with certain
documents that have a page width greater than its page height.
In Word 2003, it was no problem to set the page width greater than the page height while setting the page orientation to "portrait".
In Word 2010, this seems impossible: despite leaving the page orientation to "portrait", if one changes the page width/height as stated,
Word 2010 automatically adjusts the orientation to "landscape". Resetting the orientation to "portrait" will flip the page's width/heigth settings.
This behaviour causes printing problems: the page prints out 90° rotated.
I do not believe this is a printer driver issue: I tried several different printer drivers, and all give the same (bad) result. Setting the printer driver's page orientation settings (before printing) makes no difference, as
Word 2010 seems to force the page orientation settings.
Inserting the documents 90° rotated is not an option, since it causes problems with the printing margins.
This is very annoying, since we have to print official documents of a municipality (driver's licences).
Is there a workaround for this issue?
Regards,
Laurent Grandgaignage
Sysadmin Gemeentebestuur Stabroek, Belgium

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can follow these steps to test this issue
Step 1: Repair Office 2010
1.
Click
Start, and then click Control Panel.
2.
Click
Programs and Features.
3.
Click the
Office 2010 program that you want to repair, and then click
Change.
4.
Click
Repair, and then click Continue. You might need to restart your computer after the repair is complete.
Step 2:
Rename the global template (Normal.dotm)Follow the steps for the operating system that you are using:
Windows Vista and Windows 7
a)
Exit Word 2010
b)
Click
Start.
c)
In the
Start Search box, type the following text, and then press
ENTER:
1.
%userprofile%\appdata\roaming\microsoft\templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
Microsoft Windows XP
a)
Exit Word 2010
b)
Click
Start, and then click Run.
c)
In the
Open box, type the following text, and then press ENTER:
%userprofile%\Application Data\Microsoft\Templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
f)
Close Windows Explorer.
How to troubleshoot print failures in Word 2010, Word 2007, and Word 2003
http://support.microsoft.com/kb/826845
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

[Applet]Printing issue with pdf files on Xerox 4595

Greetings !!
I'm trying to print to a Xerox 4595 printer from a Windows XP station (limited account) using a Java Web Applet.
This applet generates pdf files which have to be printed.
The Xerox 4595 uses a printing queue that is detected by the Applet.
The problem is the following: usually when printing a simple local file from this computer there is a box that asks you your login to let you create a job and then print.
When using the Java Applet, there is no way to have this print box displayed. We have the Java Print Dialog but once clicked on "Print" there is no box displayed to pass the login to the printer and let us print.
Is anyone already worked with Xerox 4595 and experienced such issue ?
How can I, using the Java language and modify the Applet, ask the printer to send me the dialog box asking for the login ? Without this login no jobs are accepted and we can't print the generated pdf files.
I looked on the printer queue settings and it seems that the Xerox uses the IPP to communicate with the local computers in the office.
The server from which the Applet is used is a openSuSE Linux Web server (apache2)
How come using Linux workstations any pdf files are printed (on shared printers such HP laserjet) and under windows there is jammed characters and sheet feed instead ?

A lot can depend upon which app your are using on your tablet device, the same applies to computer programs but apps are much worse.
Which app are you using?
I would try the free Adobe Mobile Reader. This product seems to support more features than other apps.
There could even be issues with the type of tablet you are using. The Apple line may work better then Android devices since there is QA check and approval by Apple.
Another factor is the how the PDF was created.
How well are the maps displayed on your laptop or desktop? Try different values of zoom.

Issue with Message Type Triggering during Inbound Delivery Creation

Hi Experts,
Hi Experts,
Currently we are facing issue with message type triggering during inbound delivery creation:
In NACE transaction for Inbound delivery we have 3 custom output types:
Pricing Procedure Used is standard one -> E10001
Z140 Inbound Delivery Create (This should get triggered when IB delivery is created)
Z141 Inbound Delivery Change (This should get triggered when IB Delivery is changed)
Z142 Inbound Delivery Delete(This should get triggered when IB Delivery is deleted).
At present if i check delivery in VL33 -> Extras -> Delivery Output
Both Z140 and Z141 are being triggered during IB delivery creation. While it should be only Z140.
Could you please suggest that are we missing any configuration in SPRO or we need to create any custom routine (requirement) to handle this?
Thanks

Hi,
There is no fine-tuned control for inbound delivery messages as for Purchase order. Hence I guess to meet your above requirement, you have to go for a custom solution similar to the PO fine tune control settings.
Thanks,

Print a invoice output type on two printers

Hi,
I want to print a invoice output type on two printers simultaneously.
Is there is any ways to assing this.
Regards,
S

Hi,
From SAP at a time only single printer can print the Output.
But once the spool request is generated, in the OS level with the help of network people on SPOOL SERVER you can distribute that Spool request to multiple printers.
Regards,
Anji

How to send invoice through email with output type RD00?

What are the configuration settings to send invoices through email with output type RD00?

Hi,
Please go through the following links:
[E-mail|Email Configuration Settings]
[e-mail|Re: EMAIL BILLING DOCUMENT TO CUSTOMER THROUGH SEND MAIL OPTION IN VF02]
After triggering the output,goto T.Code SOST and process it.
So that e-mail will be triggered immediately.
You can use External send/EDI/simple mail for this.
Regards,
Krishna.

Script Form print issue with output type

Similar Messages

Maybe you are looking for