Script in dispatcher.d not starting automatically

I have a simple script that starts synergyc and connects to a different server dependent on my current network connection. The script is:
- Executable
- Owned by root
- Not writeable by any other group
- Executes as expected when run manually
I have ran the following commands as shown in the wiki (Though I only have an idea what they actually are doing)
# systemctl start NetworkManager-dispatcher
# systemctl enable NetworkManager-dispatcher
Any ideas on what I'm missing would be appreciated

Similar Messages

Oracle 11g XE listener does not start automatically during boot

Hi,
This happened to me recently I just wanted to share it with you.
For development I was running Standard Edition, at some point I decided to run also XE on the same server for another reasons. Everything was working fine, except that after restart of the server, the XE listener is not starting automatically. Debugging the startup script I found that this happens because of a bug in the code, which assumes that XE listener is running if it finds the word LISTENER within the processes list. I didn't found any obligation in the docs for running XE without any other databases on the same host.
In file /etc/init.d/oracle-xe, at line 556 the code is failing:
1     + status='oracle 2889 1 0 May13 ? 00:00:05 /oracle/ora112se/bin/tnslsnr LISTENER -inherit'
2     + '[' 'oracle 2889 1 0 May13 ? 00:00:05 /oracle/ora112se/bin/tnslsnr LISTENER -inherit' == '' ']'
As you can see I have another listener(the one for SE) running and because of the XE startup script found the keyword LISTENER it’s supposing that the XE LISTENER is already running.
To fix this simply change line 556 from:
1     status=`ps -ef | grep tns | grep oracle`
To:
1     status=`ps -ef | grep tns | grep oracle | grep xe`
Now XE listener is started automatically during boot.
Sve
Blog: http://sve.to
Twitter: sgyurov

I though the same thing, but XE LISTENER is running on localhost and port 1522. On the other hand XE have local_listener explicitly set to the very same connection descriptor. Even XE installation was second on this server.
I've could change that yes, but the startup script doesn't seemed to have this mind.
Regards,
Sve

Concurrent Manager not starting automatically with adstrtal.sh apps/apps

I am facing an issue with ICM, its not starting automatically when I start the application with help of
/d01/oracle/viscomn/admin/scripts/VIS_oracleapps/adstrtal.sh apps/apps
But, I am able to start it manually with adcmctl.sh start apps/apps - any clue why its not starting automatically?
Pls let me know if any suggestions to troubleshoot...
CM log file snip -
Shutting down Internal Concurrent Manager : 26-JUN-2008 11:06:13
List of errors encountered:
_ 1 _
Routine AFPCMT encountered an ORACLE error. ORA-01012: not logged on
Review your error messages for the cause of the error. (=<POINTER>)
_ 2 _
Routine AFPCSQ encountered an ORACLE error. ORA-01017: invalid
username/password; logon denied
Review your error messages for the cause of the error. (=<POINTER>)
The VIS_0626@VIS internal concurrent manager has terminated with status 1 - giving up.
Thanks,
Ambi

This issue has been fixed, it was due to (apps) password was misspelt in the script calling the adstrtal.sh script.

MSExchangeSA and IS is not starting automatic at reboot after upgrading the server from SP1 to SP2

I am running a 2 node DAG with separate Hub & CAS servers
I have already upgraded the Hub CAS server and they are fine
Exchange running on Windows 2008 R2 SP1
All are in VM-Ware ESXi 5.0
After I upgrade the mailbox server to SP2 the SA and IS service not starting automatic after reboot
If I run "net time /set" command and then restart ADtopology server, the IS and SA starts fine
But again after reboot they do not start
Also I get the below event in the app log when the IS & SA fails to start
Log Name: Application
Source: MSExchangeIS
Date: 05/22/2012 5:15:03 AM
Event ID: 5003
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: server.domain.com
Description:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either on the client or on the server, and may require a restart of that computer. Verify that your domain is correctly
configured and is currently online.
If I check the Registry for time resource it is taking from the DC
I manually compared the time between DC and Exchange and it is fine
Since the Exchange mailbox is virtual, I checked the time sync on VM-Ware tools and it is "unchecked"
Checked for group policy and do not find any specific to time sync.
Confirmed that Windows Time service is running
Suspecting a Operating system issue, tried to upgrade the other DAG
Even that node is displaying the same symptom and Issues
Tried to install RU1 on both nodes and that too did not fix the issue.
Checked with VM-Ware engineer and he said that every thing from VM-Ware end is fine
Is Anyone have come across the issue before ?

Exchange 2010: Unable to initialize the Information Store
Problem:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either in the client or the server, and may require a reboot of that computer. Verify that
your domain is properly configured and is currently online.
Solution:
Open a cmd prompt from the Exchange Server as administrator (right mouse click on the command prompt shortcut and select “Run as Administrator”)
Run this command
Net time \\ADServerName /Set
Restart the Microsoft Exchange Active Directory Topology Service
*Important!! You have to restart the Microsoft Exchange Active Directory Topology Service or this fix will not work.. I tried just starting the Information Store service after running the command it it still failed..
This worked for me and all is well on my exchange server.
- See more at: http://www.mountainvistatech.com/2012/06/04/exchange-2010-unable-to-initialize-the-information-store/#sthash.SwQpgQEM.dpuf

My database does not start automatically

i am using windows 2000 server and oracle 9.0.1, my database does not start automatically when i am booting the system.
in regedit autostart is there, my service is getting started automatically and i used startmode auto in my oradim command but still i have to manually log in to start the database, PLS help!!!
another issue is that i want to startup/shutdown the database using a user other than sysdba, pls tell which permission shud i grant as dba, connect, resource permissions are not doing the required job

spfile concept is introduced from Oracle 9i. You can call it system parameter file. Benefits of having spfile concept is that what ever changes u make to system through commands
alter system set ??? = ????
get automatically saved in the spfile???.ora which is managed by Oracle.
Main idea behind that as thought by Oracle is that previously u needed to change that parameter in init.ora file then start the database again after shutdown. Now u are doing everything online. spfile???.ora takes priority in the new Oracle concept.
If u delete spfile???.ora file, then it needs some specific init.ora which need to told to Oracle which can be through command like
startup pfile='complete patah .............'
Bansal

Tomcat5 still does not start automatically

Hello,
Novell-tomcat5 still does not start automatically at boot although it is set to do so.
This is from beginning of the oes2/SBE2.5 installation (without simba).
It is still the same behavior after applying OES2/SP2 and SLES10/SP3 patches.
After booting at terminal console:
/etc/init.d/novell-tomcat5 status shows unused
/etc/init.d/novell-tomcat5 start starts tomcat5 without errors
In my boot.msg I found the following error:
____START______
<notice>'novell-nss start' exits with status 0
<notice>novell-tomcat5 start
Starting Tomcat (/var/opt/novell/tomcat5/)<notice>checkproc: /sbin/klogd 4842
<notice>checkproc: /sbin/syslog-ng 4839
<notice>checkproc: /sbin/klogd 4842
<notice>checkproc: /sbin/syslog-ng 4839
<notice>checkproc: /usr/sbin/slpd 7030
<notice>checkproc: /usr/sbin/slpd 7030
<notice>checkproc: /sbin/portmap 6200
<notice>checkproc: /sbin/portmap 6200
<notice>checkproc: /usr/sbin/sshd 6915
<notice>checkproc: /usr/sbin/sshd 6915
<notice>checkproc: /usr/sbin/nmbd 5530
<notice>checkproc: /usr/sbin/nmbd 5530
<notice>checkproc: /usr/sbin/smbd 6900
<notice>checkproc: /usr/sbin/smbd 6900
<notice>checkproc: /usr/sbin/namcd 8495
<notice>checkproc: /usr/sbin/namcd 8495
<notice>checkproc: /usr/sbin/ntpd 7000
<notice>checkproc: /usr/sbin/ntpd 7000
<notice>checkproc: /usr/sbin/slpd 7030
<notice>checkproc: /usr/sbin/slpd 7030
<notice>checkproc: /sbin/klogd 4842
<notice>checkproc: /sbin/syslog-ng 4839
<notice>checkproc: /sbin/klogd 4842
<notice>checkproc: /sbin/syslog-ng 4839
<notice>checkproc: /usr/sbin/slpd 7030
<notice>checkproc: /usr/sbin/slpd 7030
<notice>checkproc: /sbin/portmap 6200
<notice>checkproc: /sbin/portmap 6200
<notice>checkproc: /usr/sbin/sshd 6915
<notice>checkproc: /usr/sbin/sshd 6915
<notice>checkproc: /usr/sbin/nmbd 5530
<notice>checkproc: /usr/sbin/nmbd 5530
<notice>checkproc: /usr/sbin/smbd 6900
<notice>checkproc: /usr/sbin/smbd 6900
<notice>checkproc: /usr/sbin/namcd 8495
<notice>checkproc: /usr/sbin/namcd 8495
<notice>checkproc: /usr/sbin/ntpd 7000
<notice>checkproc: /usr/sbin/ntpd 7000
<notice>checkproc: /usr/sbin/slpd 7030
<notice>checkproc: /usr/sbin/slpd 7030
failed
<notice>'novell-tomcat5 start' exits with status 7
<notice>novell-xregd start
Starting novell-xregd...done
<notice>'novell-xregd start' exits with status 0 ....
_______END______________
Of course it es even a cosmetic problem I don't want to start tomcat manually everytime when booting up.
Has anybody an idea what could be wrong?
Yours sincerely
OliverN

Originally Posted by revilo
Hello,
Novell-tomcat5 still does not start automatically at boot although it is set to do so.
This is from beginning of the oes2/SBE2.5 installation (without simba).
It is still the same behavior after applying OES2/SP2 and SLES10/SP3 patches.
After booting at terminal console:
/etc/init.d/novell-tomcat5 status shows unused
/etc/init.d/novell-tomcat5 start starts tomcat5 without errors
Of course it es even a cosmetic problem I don't want to start tomcat manually everytime when booting up.
Has anybody an idea what could be wrong?
Yours sincerely
OliverN
Hi Oliver,
If you are manually installing the component products then this is no longer a "NOWS SBE" installation. Any issues you encounter are related solely to the component products. OES Linux Installation questions should be directed to: OES-L: Install
In the mean time, to see if it is configured to start automatically use "chkconfig". For instructions:
Code:
man chkconfig
Is it configured to start automatically?
Code:
server:~ # chkconfig --list | grep novell-tomcat5
novell-tomcat5 0:off 1:off 2:off 3:on 4:off 5:on 6:off
The response from the above command shows that novell-tomcat5 should start automatically for runlevels 3 and 5.
If it is not set to start automatically on your server, you can make it start by:
Code:
chkconfig novell-tomcat5 on
I am by no means a Linux expert. If this doesn't resolve your issue, I suggest you post in the appropriate forum where you will find knowledgeable people willing to help.

MII UDS does not start automatically on server reset

Hi,
MII UDS does not start automatically on server reset, although it was set as automatically start.
What could be the reason of this problem?
Thanks.

Hi,
Is the runtime mode is set to service?
Have you referred this document?
[Programatically Starting and Stopping an SAP xMII UDS Executable Instance|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0f460c3-7f92-2910-02af-b608f92977c3]
Regards,
Musarrat
Edited by: Musarrat Husain on Jul 6, 2011 8:27 PM

EyeTV: Mac does not start automatically

Mac does not start automatically for EyeTV recordings. I reinstalled EyeTV but it did not help.
Any help appreciated.
iMac i5, 2,7Ghz, OS X 10.7.4
Kind reagards,
Torsten

I have to same problem: Bought Elgato Sat 3 years ago. Now I decided to install it in the living room and bought a new i5 Mac mini. EyeTV works fine but does not wake up Mountain Lion 10.8.2 sometimes.
When I program wake up events manually via System Preferences or pmset command in the terminal, all works fine and my Mac wakes up. I tried everything, from clean reinstall to debugging AutoWake.plist and such.
Annoying!

The CSSD does not start automatically on Non-RAC - AIX 5L

Hi all,
Database: Oracle 10.2.0.4
O.S AIX 5.3 TL 10
I am facing a problem with the CSSD Non-RAC/Clusterware.
When we restarted the server the service CSSD does not start automatically and there is no relevant messages in the log files of CSSD.
Running the "localconfig reset $ORACLE_HOME", execute successfully but does not start the CSSD.
Running "/etc/init.cssd start" - does not work, nothing happens when we run it
I manually ran "/etc/ init.cssd run" and the service CSSD (ossd.bin) was started without errors.
No errors on errpt from AIX.
I've opened a SR but I am waiting for response from Oracle.

Hi,
I believe this problem is not with Oracle, but in AIX.It may be that one process that is starting on boot is holding the other process. You need to identify what is process/application.
Check the process on inittab that are already active and which are inactive they should be active.
One clue: Is very common process that is initiated in wait mode hold the boot server.
wait
When the init command enters the run level that matches the entry's run level,
start the process and wait for its termination.
All subsequent reads of the /etc/inittab file while the init
command is in the same run level will cause the init command to ignore this entry.http://publib.boulder.ibm.com/infocenter/aix/v6r1/index.jsp?topic=/com.ibm.aix.files/doc/aixfiles/inittab.htm
Regards,
Levi Pereira

Oracle service, Listener and http server does not start automatically

Hello,
I have Oracle 9i release 2 installed on Unix HP box if system restart in case of power failure the Oracle service, Listener and http server does not start automatically, is there any ready reference available to check what's wrong is happening(I don't have knowledge of Unix).
Thanks, Khawar.

Hi Rajesh,
Thanks for reply, I will check this link and will be back if facing problem.
Regards, Khawar.

Workflow does not start automatically on create item (yet another time)

The topic has been discussed broadly throughout different forums, but I didn't find the solution to my issue yet and hope you can help me out with ideas to sidestep the difficulties created by Microsoft.
I have one list 1 in Site Collection A, and one list 2 in Site Collection B (PWA site collection). I need to copy an item from list 1 to list 2 with some values. I use a "Call http web service" action to accomplish
that as I need to copy informatin cross site collections.
The "Call webservice" is in an App Step, because the user creating an item in list 1 does not have permissions on list 2. Thus, my item is created "by workflow" (not "by System Account") in list 2. Now I need a second
workflow to start on list 2 which will create a project in Project Server.
As I am working across 2 site collections, I can not use a SharePoint 2010 workflow with impersonation step for list 1 as the "Call a webservice" action is not available for SP2010 workflows and "Copy item" only works in the same site.
In Nintex I can impersonate the web service call - is this also somehow possible for SPD2013 workflows? Or is there any other possibility to get over this silly restriction of workflows not starting automatically on System account created items? Someway
perhaps to tweak the App Step in impersonating with another user account?
Any help appreciated!
I really can't understand, that this common requirement is still not solved by Microsoft :-( I found more threads on the topic than I can count, so this seems to happen quite often... at least they should finally offer a proper way of doing some kind
of impersonation with the calls so we have a chance to change the creating user account.

Hi,
As I understand, you would like to use workflow to copy list items cross site collection.
So far it is not supported with OOB workflow option, here is an codeplex workaround:
https://spdactivities.codeplex.com/wikipage?title=Copy%20List%20Item%20Extended%20Activity
Please check if it can be help.
Regards,
Rebecca Tu
TechNet Community Support

ITunes does not start automatically when iPhone is connected

Have just upgraded to LION. iTuneshelper in Login items is now not found and iTunes will not start automatically when an iPhone is connected via USB.

Hi,
See this Discussion:
https://discussions.apple.com/message/15693777#15693777
Cheers,

Panel does not start automatically in Gnome 2.24.3

Since Gnome 2.24.3, the Gnome Panel does not start automatically.
I had to manualy add it to the startup group via "Sessions" in order to force it to start when login finishes.
Does anybody has the same behavior?
Should I report it as a bug?

That may be true but it is a real pain since when it happens the only way to recover is to terminate all of the iTunes modules with task manager and start it manually. It also leaves the IPOD in a state that says do not disconnect. You can disconnect since nothing is really happening but there is no excuse for this not to start much faster. When you have multiple users it is a real pain. It ought to be able to either end when finished or better yet allow multiple users simultaneously updating from different libraries.
I guess i will just have to get in the habit of treating it as a single user and start and stop it every time I need it and be suer not to let it run. Not nice because that means waiting for larger Podcast downloads instead of having there ready for me when I sign on my computer.

ITunes does not start automatically when I plug in my iPHONE. When I start it manually it does not recognize my phone although the phone is visible in My Computer.

Itunes does not start automatically when I plug in my iPhone. When I start it manually, it never recognizes the phone although it does ask if I want to download pictures etc. Many albums have no art work that use to. iTunes completely unresponsive to the mouse.

Hi billm1013,
I'm sorry to hear you are having these issues with your iPhone. If your iPhone isn't being recognized in iTunes, and/or iTunes isn't responding to your mouse when the iPhone is connected, you may find the troubleshooting steps outlined in the following article helpful:
If you don't see your connected device in iTunes for Mac - Apple Support
Regards,
- Brenden

Windows listener service will not start automatically

I just installed 11.2.0.3 Standard Edition One and when I reboot the server, the listener service is not started. The service is set to start Automatically. I have to login, open services and then push start.
The oraceServiceSId does start automatically,
The listerner service does not start automatically,
The dbconsole service does not start automatically,
The processManger1 service (from middleware) does not start automatically
This is Windows 7 64 bit.
Any ideas?
Edited by: brian.mcginity on Dec 10, 2011 11:25 AM

I found where the services logs are recorded in the event viewer. Funny thing just happened, I was just about to do another reboot so I could check the logs when I noticed there were window updates in q.
So after running the updates, the os requested to reboot . For the first time, the services started automatically.
These are the updates which fixes the probem:
Security Update for Windows 7 for x64-based Systems (KB2639417)
Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2618444)
Security Update for Windows 7 for x64-based Systems (KB2620712)
Cumulative Security Update for ActiveX Killbits for Windows 7 for x64-based Systems (KB2618451)
Edited by: brian.mcginity on Dec 13, 2011 9:52 PM
Edited by: brian.mcginity on Dec 13, 2011 9:53 PM

Script in dispatcher.d not starting automatically

Similar Messages

Maybe you are looking for